favicon loading fails

Hello

I develop a Web site and wish to add a favicon. so far no problem. The favicon does well in Opera, IE, Chrome, and Safari
Well load the other favicons from different sites. I had this problem in the past and after a while, hours - days, the favicon will appear later. But then, I would like to make changes and the whole process starts again

However I fail to get Firefox to load. Is this a known issue? Is there a solution?

http://www.angeliquedon.nl
I can see favicon in Firefox. Try to reload this page while you are viewing using F5. Or clear the cache.

Generally, it is best to have the image of favicon.ico in the root directory, rather than having this image in a folder, such as the folder/photos / where you got it. Many web browsers search here and will be displayed, even without using a Meta tag.

Tags: Firefox

Similar Questions

  • Windows Update Standalone Installer: error 0x80073afc the resource loader failed to find MUI file. Windows 7 64 bit

    I have a desktop PC running Windows 7 Professional 64-bit.  There is an update which is unable to complete, causing the PC to undo changes to before the update.  It usually takes an extreme amount of time, and of course, I've always updates installed.  I tried to use the Microsoft Fixit tool, which came back with error 0 x 80070057.  I saw in a community forum that I could try the tool of microsoft SURT, but after the long scan he came back with the following error:

    Windows Update Standalone install

    Setup has encountered an error: 0x80073afc

    The resource loader failed to find MUI file.

    Please help.

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the question and your efforts to resolve.

    This problem can occur because of corrupted Windows Update files and components.

    I suggest you to reset the Windows update components and check if that helps.
    Refer to this article:
    How to reset the Windows Update components?
    https://support.Microsoft.com/en-us/KB/971058

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • The execution of work load failed

    Hi experts BI Apps,

    I made a plan to load on the supply of the Oracle and analytics spend, load failed at the SDE_ORAR1212_ADAPTOR_SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS session

    ODI-1519: series step "start load Plan.

    (InternalID:2278500) ' failed, because the child step "Global Variable Refresh.

    (InternalID:2279500) "is a mistake.

    ODI-1519: series step "Refresh Global Variable (InternalID:2279500).

    has failed, because the step child ' Source extracted phase (InternalID:2282500) ' is

    by mistake.

    ODI-1519: step series ' Source extracted phase (InternalID:2282500) ' failed

    because the child step "1 general (InternalID:2283500)" is in error.

    ODI-1519: series step '1 general (InternalID:2283500)' failed, because

    step child "2 General SDE (InternalID:2326500)" is in error.

    ODI-1519: series step '2 General SDE (InternalID:2326500)' failed

    because no children "Parallel (InternalID:2412500)" is in error.

    ODI-1518: parallel step 'Parallel (InternalID:2412500)' failed. 1 child

    steps in error, which is more than the maximum number of permits

    errors (0) defined for parallel step.  Has no measures of the child: 3 SDE

    General MEASURE unit (InternalID:2432500)

    ODI-1519: series step '3 General SDE UOM (InternalID:2432500)' failed

    because the step of the 'Load Target Table (InternalID:2435500)' child is in error.

    ODI-1519: series step 'Load Table of target (InternalID:2435500)' failed

    because the step 'EBS_12_1_2 - 3 (InternalID:2436500) DSN' child is in

    error.

    ODI-1519: series step 'EBS_12_1_2 - DSN 3 (InternalID:2436500)' failed

    because the stage of the child "UOM_DIM (InternalID:2437500)" is in error.

    ODI-1519: series step 'UOM_DIM (InternalID:2437500)' failed, because

    stage of the child 'SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS '.

    (InternalID:2438500) "is a mistake.

    ODI-1217: Session

    SDE_ORAR1212_ADAPTOR_SDE_ORA_UOMCONVERSIONGENERAL_INTERCLASS (667500)

    fails with return code 1031.

    ODI-1226: step run

    SDE_ORA_UOMConversionGeneral_InterClass.W_UOM_CONVERSION_GS falls down after 1

    attempt (s).

    ODI-1240: Flow Run

    SDE_ORA_UOMConversionGeneral_InterClass.W_UOM_CONVERSION_GS fails while

    running a load operation. This flow of charge table target

    W_UOM_CONVERSION_GS.

    ODI-1227: SrcSet0 (load) task fails on the source of ORACLE connection

    ON_EBS1212.

    Caused by: java.sql.SQLSyntaxErrorException: ORA-01031: insufficient

    privileges

    I will be grateful someone can give some clues about this.

    Thank you.

    you don't have enough privileges for the user you are using to run the load. Check with the team of DB if the user you are using has obtained the privileges of right or not

  • The download starts and gets to about 50 MB before the zone State says down load failed after refresh

    Hello

    I just had to update my laptop Azus Windows 8.  I reinstall all my programs.  All my financial records are Open Office, so I need to reinstall the program.  The download starts and gets to about 50 MB before the zone State says down load has failed.  This happens no matter if I choose run or save.  I lowered my security settings for IE but still not completely download.  I downloaded Open Office earlier this year with no problems.  It must be something that I am missing.  Please help I need to do my job.  Thank you

    Do you have any error messages at all when you try to download?

    What utility Antivirus you have installed? Have you tried to disable it temporarily and and see if they work?

    Have you tried to save the download to a different location on the hard drive such as the desktop?

    Have you tried using another user account?

    What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

    Press the Windows key + X

    Click prompt (Admin)

    At the command prompt, type the following command, press ENTER.

    ipconfig/release

    then

    ipconfig/renew

    then

    ipconfig/flushdns

    leave the command prompt

    Press the Windows key + R, type: folder

    Press enter

    Delete the contents of the temp folder

    Restart the computer and try to download again.

    If the problem persists, try resetting your router if you are connected to one.

    Turn off the router, unplug it, wait 10 minutes

    Plug it in again, power up once again

    Reconnect the Ethernet cable

    Try to download again

    You can try to download free Office instead which can OO.org Open files.

    http://www.LibreOffice.org/download/

  • HFM drill region load fails

    In my current application whenever I load given to HFM drill region to load now fails. The data is loaded successfully, but no region of drilling is responsible. He has worked in the past I have entered into the table _ERPI AppNameregion. Error logs is also useful as always (see below)

    -----------------------------------------------------------------------------

    fLoadDRFile @ 2014-10-27-11: 24:26 *.

    -----------------------------------------------------------------------------

    System.Runtime.InteropServices.COMException (0 x 80040237): <? XML version = "1.0"? >

    < C'estr > < Ref > {B9F8FE9E-878B-4A85-AF3C-31160C928085} < / Ref > < AppName > COMMA4DIM < / AppName > < user / > < DBUpdate > 2 < / DBUpdate > < CSEC > < Num >-2147220937 < / Num > < Type > 1 < / Type > < DTime > 27/10/2014 11:24:26 < / DTime > < Svr > GBLWHFM02DV < / Svr > < file > CHsvDataLoad.cpp < / file > < line > 7213 < / line > < worm > 11.1.2.3.501.4628 < /. Worm > < / CSEC > < / C'estr >

    at HSVDATALib.IHsvData.LoadDrillableRegions (String bstrRegionsFilename, String bstrLogFileName, Int32 lLoadMode, Boolean & pvbErrors, Boolean & pvbWarnings)

    at erpiHFMAdapter.clsFMAdapter.fLoadDRFile (String strFileName)

    Problem with the path of the root application folder, it should be changed to use the UNC format

  • EPMA planning App - contour utility load fails

    I use version 11.1.2.3.

    I am loading new members, IE, metadata.

    First, I exported the dimensions of accounts using the utility. I then imported. 13 records of 13 files import successfully. I then added the Member of "Cash", that was inserted in line 7:

    PI_Accounts, Parent, Alias: default, valid for the Consolidations, storage of data, calculation of re encoding, Description, formula, UDA, Smart List, Type of data, Type of hierarchy, account Type, time, balance the value of Skip, Type Exchange rate, use 445, reports, the Plan Source Type, on the gaps Plan Type (PoiznIvy), aggregation (PoiznIvy)

    P & L, PI_Accounts, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Net Income, P & L, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Balance sheet, PI_Accounts, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Total assets, balance sheet, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Current assets, Total assets, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Cash, active, fake money, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Assets, Total assets, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Total liabilities & Equity shareholder, balance sheet, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Liabilities, liabilities Total & Equity shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Short-term liabilities, obligations, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Liabilities long-term, passive, fake, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Equity shareholder, Total liabilities and capital shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Common shares, the shares of the shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    Retained earnings, capital shareholder, false, store, false, unspecified, no income, flow, no, no, false, non-frais, PoiznIvy, true, + he said.

    The java error I get is: "Registered"Cash"Member Fetch failed." Up to 13/14 load of documents and the new 1 record is rejected.

    "Cash" he already has part of the application to make it load? That is why the utility seems pretty useless with respect to the loading of the new metadata. I already checked that there are no special characters in the name of the Member 'Cash '. There is no empty space at the end of the line. So why would I get this error?

    SH! will wrote:

    This utility works well for classical planning applications...

    EPMA to load the metadata of the tables of the interface.

    See you soon!

    SH! going

    Do not use the tables of the interface you can load flat files with EPMA, while it is true the outlineload utility is classic of planning applications.

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • DAC load failed.

    Hello

    Ours is still BI 10 g with DAC 7.9.6. We have a plan to run on demand, which retrieves data from source files to load the tables middle with informatica and eventually final target.  Holidays he did no business, so NO input file is sent... so plan execution is failed and caused other tasks scheduled after that on.  Can anyone suggest any possible solution to make everything run smoothly.  Import of empty files is not an option by the customer.

    Thank you

    Fri

    Two ways to handle this; Try to go to the order which would check the file, if the file doesn't exist do not then try to create a file with content 0 for all columns.

    Another way is to add the subject of decision etc.

  • SQL Loader failed to load the same source sometimes data file

    I meet different types of data, loading errors when you try to load data. What makes it really annoying, is that I'm not able to identify the real culprit since the success of load depends on the amount of lines in the source data file but not its content. I use dataset Toad export feature to create delimited data set. When I decided to take the first 50 lines then succeeds data to load into the target table. When I decide to take the first 150 lines then the data to load into the target table fails indicating that:
    Record 13: Rejected - Error on table ISIKUD, column SYNLAPSI.
    ORA-01722: invalid number
    I can see .bad file that the same line has been loaded successfully when the data file that contains 50 rows was used. The content has no column for this particular row is NULL (no chain).
    I suspect that the toad generates faulty delimited text file when taking 150 lines. File data for reasons of confidentiality, I can't show. What can I do? How can we all further investigate this problem? Size of the array that must be loaded by SQL Loader is almost 600 MB. I use Windows XP.

    Published by: totalnewby on June 30, 2012 10:17

    I do not believe that customer sqlloader 11g allows you to load a 10g database. You can run sqlldr on the server of database 10g itself? PL also post the rest I asked information

    HTH
    Srini

  • Reviews of loading fails with Oracle DB but DB SQL

    Hello

    When I tried to use the newspaper to charge, the registration procedure was pass.
    After I clicked on the message button, an error message showed as follows:
    ==================================================
    Error: Failed to import files.
    Details: Invalid procedure call or argument File=C:\Hyperion\FDM\t01\Inbox\Journal.xls
    StackTrace:
    upsMPLDMw.clsMPLoaderClass.fMultiImportExcel (colLS [colLoadSet &])
    Hyperion.FDM.Pages.MultiLoad.ImportButton_Click (sender As [Object], e [EventArgs])
    ==================================================

    However, I tried the same sheet excel template file on an other Soft FDM which
    repository backend, sql Server 2005, was different from the previous one, the
    validation process is OK.
    I also found this journal ' multi-Load Model: Import "as follows:
    ==================================================
    News of the event: Bulk Import failure on the record!
    Error code: 5
    E/s Source: C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\tWfdadmi14356153002314.tmp
    ==================================================

    The original FDM 9.3.1 app was based on the oracle 10.2.0.4 repository.
    So I wonder what there should be a few bugs when the FDM generates oracle import in the log file.
    I can't find any bug report or attached to this subject on the website of oracle patch support.

    Did someone meet this similar problem?
    Or what configuration setting should I set?
    Any advice would be appreciated.
    Thank you ~.

    Tony

    Hello

    Try changing the Type of load of places to SQL Insert
    Metadata > locations > select the locations > load Type > SQL Insert

    I encounter the same problem yesterday with Oracle DB

    Mac

  • OLIVIER 7.9.5 'Financial analytics' full load fails

    Hi all

    We are implementing instance OBIA7.9.5 Oracle 11.5.10 Vision.

    Components installation succeeded.
    We followed the respective Configuration steps for the Analytics module and set up the latter.

    When we start full charge for financial analytics,
    321 tasks, 215 was properly executed, 2 tasks failed and remaining were stopped

    below were the failed task
    Load in Position Dimension-> create Index W_POSITION_D_U1 INDEX
    TASK_GROUP_Extract_EmployeeDimension-> create Index W_EMPLOYEE_DS_U1 INDEX

    We received the error log below, on the creation of Index.

    ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found

    EXCEPTION CLASS: java.sql.SQLException

    oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
    oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
    oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
    oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
    oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:210)
    oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:961)
    oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1190)
    oracle.jdbc.driver.OracleStatement.executeUpdateInternal(OracleStatement.java:1657)
    oracle.jdbc.driver.OracleStatement.executeUpdate(OracleStatement.java:1626)
    com.siebel.etl.database.DBUtils.executeUpdate(DBUtils.java:266)
    com.siebel.etl.database.WeakDBUtils.executeUpdate(WeakDBUtils.java:357)
    com.siebel.analytics.etl.etltask.SQLTask.doExecute(SQLTask.java:122)
    com.siebel.analytics.etl.etltask.CreateIndexTask.doExecute(CreateIndexTask.java:90)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:271)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:200)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:149)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:430)
    com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
    java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:269)
    java.util.concurrent.FutureTask.run(FutureTask.java:123)
    java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:650)
    java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:675)
    java.lang.Thread.run(Thread.java:595)
    459 SEVERE kills Nov 10 20:40:50 GMT + 05:30 2009 failure detected during execution of CREATE INDEX: W_POSITION_D:W_POSITION_D_U1.
    Error code: 12801.
    Error message: runtime error: CREATE UNIQUE INDEX
    W_POSITION_D_U1
    WE
    W_POSITION_D
    (
    INTEGRATION_ID Asc
    DATASOURCE_NUM_ID Asc
    EFFECTIVE_FROM_DT ASC
    )
    NOLOGGING PARALLEL
    with error java.sql.SQLException: ORA-12801: error reported in the parallel query P000 Server
    ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found
    .

    everything by analyzing the error code above in the oracle forum, got a clue at the bottom of the link
    ORA-01452: cannot CREATE a UNIQUE INDEX. duplicate keys found

    even after having made the changes mentioned in the link above and restart the ETL even once, we get the same error message.

    Let us know how to solve this

    Thank you
    Saran

    If you right click on the task (or taskgroup) who is a failure in the dac and select 'Détails', you can see a list of the indexes that are supposed to have created and to check on those who fail.

    In addition, if you just want to finish the execution plan to look at where you are now find the clues failed and set them to the full status and re-queue implementation plan.

    I hope this helps!

    Austin

  • Windows error recovery, "load failed with error 1009 (STHIVE #0).

    Hello world

    This problem occurred to me yesterday. When I started windows, there is here a dialog box saying "Windows Error Recovery" and below, is

    "Unable to start Windows. A recent hardware or software change might be the cause. "(I don't remember changing anything)

    "If windows files have been damaged or misconfigured, startup can help diagnose and fix the problem. If the power was interrupted during startup, choose Start Windows normally. »

    There are two options it saying

    -Launch Startup Repair tool

    -Start Windows normally

    When I clicked on start Windows normally, seems that Microsoft Corporation loading bar never ends

    When I clicked launch a startup repair... A box named "Startup Repair" appeared, saying "Startup Repair is checking your system for problems..." "But after that, it seems that nothing had changed. When I opened my laptop once again, he went to the dialog box saying "Windows Error Recovery" again.

    What should I do now?

    My laptop is "Compaq Presario V3500"

    Also, I see that this tread on Compaq.com http://support.hp.com/us-en/document/c01612373 is it safe to do? I ' ts ok for me to lose all my files just to repair this laptop...

  • SQL Loader failed

    Hi all

    I am load flat file in custom intermediate table using sql loader, but I'm betting that the error

    Record 2720: Rejected - error on the table XXPLL_SALES_FCST_BGA_TMPL, column MKTG_ASP.

    ORA-01722: invalid number

    XXPLL_SALES_FCST_BGA_TMPL - Custom intermediate Table


    MKTG_ASP - contains decimal values


    I created this column as a number data type.


    I've seen much after and it was proposed to use 'Decimal external' but it still does not work. All suggestions will be useful.



    Thank you

    Sharath Chander M



    Hi Barbara Boehmer

    Now, I changed in the file ctl under 'EXTERNAL DECIMAL Mktg_ASP DONE BY a SPACE' and now all data are allowed in / load. Is - this way?

    I will also try as you say. Also if the data file has a line any, as a null value for this column will be it's causing any problem for the amendment that I have performed in ctl file?

    Thank you

    Sharath Chander M

  • Metadata load failed

    Hello

    After having locked the data of October, I have updated in the metadata as some custom dimension member deleted and added some members of accounts... then I tried to load the use of metadata (options replace)... but I get the error message, please see the screenshots...

    To be clear, the question is why would you try to remove members that are used in log entries? (Assumptions here journals have already been committed etc.) removing these members can make your inaccurate prior period information...

    So maybe you shouldn't remove members of your application and then try to load the metadata with the members in there and see if you still receive the error.

    Once, you will need to conduct a survey of your request only you you would realize that what you're doing and why you're doing your task...

    Mark the thread as helpful if it were or fix if that's what you're looking for.

  • Why statistical data loading fails if there are periods without data?

    Hello

    EPM 11.1.2.3.500 on Exalytics

    Try to load statistics of several periods (from Jul_2012 to Aug_2014).

    So is having some of them with no data, it stops.

    Is this normal? Or it should load at least the rest of the data?

    Traceback (most recent call changed):

    File '< string >", line updateTDATASEG_T_TDATASEGW, 1982

    RuntimeError: [u "error: no record exists for period"Jul_2012"', u ' error: no record exists for period"Aug_2012"", u "error: no record exists for period"Sep_2012"", u "error: no record exists for period"Oct_2012"", u "error: no record exists for period"Nov_2012"", u "error: no record exists for period"Dec_2012"", u "error: no record exists for the period"Jan_2013"' u"error "] [': no record exists for period "Feb_2013" ', u ' error: no record exists for period "Mar_2013" ", u" error: no record exists for period "Apr_2013" ", u" error: no record exists for period "May_2013" ", u" error: no record exists for the period "Jun_2013" "]

    2014-08-28 06:44:59, 387 FATAL [AIF]: error in data comm. plan

    2014-08-28 06:44:59, 397 [AIF] INFO: end process FDMEE, process ID: 380

    Thank you

    I agree that the messages in the details of the process should be more informative about the cause of the failure.

    I suggest you raise an enhancement request

    Please, you can mark this question as answered while others can see his reactions?

    Concerning

  • Batch load fails on export

    Experts,

    Test us now on a new server environment and you encounter a problem with a batch that is currently operating without issue on our current production environment.  We import, validate and export a file in FDM in our 'Real' category and the batch then retrieves the file in the Outbox, re-imports, valid and exports to a second category of "ActSeg".  We have implemented the task on the Task Manager FDM, event script and script custom exactly the same on the new environment either on the current environment of the PRD.  As I said, this process will run without problem on the current economic situation, but in the new PRD, it stops at the export stage.

    Here is the log:

    * FdmFM11XG5E Runtime Error Log entry to start [2014-03-17-16: 04:45] *.

    -------------------------------------------------------------

    Error:

    Code...-2147196849

    Description... <? XML version = "1.0"? >

    < C'estr > < Ref > {F8DC712D-38F2-4B01-A2BB-CAF5DD22C2A3} < / Ref > < AppName / > < user > XXX < / user > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2147196849 < / Num > < Type > 1 < / Type > < DTime > 17/03/2014-16:04:44 < / DTime > < Svr > XXX < / Svr > < file > CHsxServer.cpp < / file > < line > 1465 < / line > < worm > 11.1.2.1.601.4019 < /. Worm > < DStr > OpenApplication: CM < / DStr > < / CSEC > < CSEC > < Num >-2147196849 < / Num > < Type > 0 < / Type > < DTime > 17/03/2014-16:04:44 < / DTime > < Svr > XXX < / Svr > < file > CHsxClient.cpp < / file > < line > 2417 < / line > < worm > 11.1.2.1.601.4019 < / worm > < / CSEC > < / RTSs >

    Process... clsFMAdapter.fConnect

    Component... D:\Oracle\Middleware\EPMSystem11R1\products\FinancialDataQuality\SharedComponents\AdapterComponents\fdmFM11xG5E\fdmFM11XG5E.dll

    Version... 145

    Identification:

    User... XXX

    Name of the computer... XXX

    Connection of FINANCIAL MANAGEMENT:

    Name of the application...

    Name of the cluster...

    Field...

    Connect status... No open connection

    * Start the journal entry for the Runtime Error FDM [2014-03-17 16:04:44] *.

    -------------------------------------------------------------

    ERROR:

    Code............................................. 10054

    Description... Adapter function [fConnect] failed.

    Process... clsBlockProcessor.ActCheckIntersections

    The component... upsWBlockProcessorDM

    Version.......................................... 1112

    Thread........................................... 5816

    IDENTIFICATION:

    User............................................. XXXX

    Name of the computer... XXXX

    App Name......................................... XX

    Client App....................................... BatchEngine

    CONNECTION:

    Provider......................................... SQLOLEDB

    Database server... XXX.XXX.COM

    Name of the database... XXX

    Trust connect... Fake

    Connect status... Open connection

    GLOBALS:

    Location......................................... SecondPass

    Location ID... 777

    Location Seg... 29

    Category......................................... ACTSEG

    ID of the category... 15

    Period........................................... Feb - 2014

    Period ID........................................ 28/02/2014

    POV Local........................................ Fake

    Language......................................... 1033

    User Level....................................... 1

    All Partitions... True

    Is Auditor....................................... Fake

    * Start the journal entry for the Runtime Error FDM [2014-03-17 16:04:45] *.

    -------------------------------------------------------------

    ERROR:

    Code............................................. 10054

    Description... [Script failure caused error]: function adapter [fConnect] failed.

    Process... clsEventHandler.PobjAPI_BPCheckIntersections

    The component... upsWObjEventHandlerDM

    Version.......................................... 1112

    Thread........................................... 5816

    IDENTIFICATION:

    User............................................. XXXX

    Name of the computer... XXX

    App Name......................................... XX

    Client App....................................... BatchEngine

    CONNECTION:

    Provider......................................... SQLOLEDB

    Database server... DC0HFMSQLPRD01. PolyOne.com\hfm

    Name of the database... CMFDM

    Trust connect... Fake

    Connect status... Open connection

    GLOBALS:

    Location......................................... SecondPass

    Location ID... 777

    Location Seg... 29

    Category......................................... ACTSEG

    ID of the category... 15

    Period........................................... Feb - 2014

    Period ID........................................ 28/02/2014

    POV Local........................................ Fake

    Language......................................... 1033

    User Level....................................... 1

    All Partitions... True

    Is Auditor....................................... Fake

    * Start the journal entry for the Runtime Error FDM [2014-03-17 16:04:45] *.

    -------------------------------------------------------------

    ERROR:

    Code............................................. 440

    Description... Automation error

    Process... clsValidationMgr.fValidate

    The component... upsWObjectsDM

    Version.......................................... 1112

    Thread........................................... 5816

    IDENTIFICATION:

    User............................................. XXXX

    Name of the computer... XXX

    App Name......................................... XXX

    Client App....................................... BatchEngine

    CONNECTION:

    Provider......................................... SQLOLEDB

    Database server... XXXX.com\hfm

    Name of the database... XX

    Trust connect... Fake

    Connect status... Open connection

    GLOBALS:

    Location......................................... SecondPass

    Location ID... 777

    Location Seg... 29

    Category......................................... ACTSEG

    ID of the category... 15

    Period........................................... Feb - 2014

    Period ID........................................ 28/02/2014

    POV Local........................................ Fake

    Language......................................... 1033

    User Level....................................... 1

    All Partitions... True

    Is Auditor....................................... Fake

    * Start the journal entry for the Runtime Error FDM [2014-03-17 16:04:45] *.

    -------------------------------------------------------------

    ERROR:

    Code............................................. 440

    Description... File [a_SecondPass_ActSeg_Feb - 2014_RA.txt] caused error: (error Automation)

    Process... clsBatchLoader.mFileCollectionProcess

    The component... upsWBatchLoaderDM

    Version.......................................... 1112

    Thread........................................... 5496

    IDENTIFICATION:

    User............................................. XXXX

    Name of the computer... XXXX

    App Name......................................... XXX

    Client App....................................... WebClient

    CONNECTION:

    Provider......................................... SQLOLEDB

    Database server... XXXX.com\hfm

    Name of the database... XXX

    Trust connect... Fake

    Connect status... Open connection

    GLOBALS:

    Location......................................... SecondPass

    Location ID... 777

    Location Seg... 29

    Category......................................... ACTSEG

    ID of the category... 15

    Period........................................... Feb - 2014

    Period ID........................................ 28/02/2014

    POV Local........................................ Fake

    Language......................................... 1033

    User Level....................................... 1

    All Partitions... True

    Is Auditor....................................... Fake

    Any thoughts on what may be the cause of this would be very appreciated.

    Thank you

    Your error log, it looks like FDM is unable to establish a connection with the server HFM. What the user is your batch process runnung under and makes that the user has rights to access the HFM target application?

Maybe you are looking for