Favorites buttons and missing Contacts in the application phone

Similar Questions

• I downloaded an app from a worker ID mobile shop and I am still registered my ID and I am using the application normally but I wonder if he could access this application and see my pictures and conversations!

  I downloaded an app from a worker ID mobile shop and I am still registered my ID and I am using the application normally but I wonder if he could access this application and see my pictures and conversations!

  Any help please?

  N ° unless you have given him your Apple ID and password, in which case he would have access to your entire account.

  You must download the application using your Apple ID. Otherwise, you will have questions the next time the app must replace or update. Strictly speaking, what you were doing was not quite legal, oven if it was a free app.

• I allowed to install Shockwave Flash in my computer this morning, and then malfunction of the application.

  1. I allowed to install Shockwave Flash in my computer this morning, and then malfunction of the application.  However, I reset my computer and connected only on yahoo.com but I couldn't sign in to other sites like google, wellsfargo and.  I tried to disable this add-on 'Shockwave Flash' managing by module.  Help, please.  Thank you.
  2. Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Shockwave Flash should not do that. However, if you want to delete it go to programs and features in Control Panel. Click once on Adobe Shockwave Player and click on uninstall in the menu at the top. I suggest you do a comprehensive analysis here, a free service offered by Microsoft. http://OneCare.live.com/site/en-us/Center/whatsnew.htm

• I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and everything transferred and has been using the application on an old PC for a while so I'm not sure is this is what is ca

  I have a proof of purchase of my Adobe CC license, but according to the site and the app I'm in a free trial. I just got a new Mac and all transferred to an older Mac and has been using the application on an old PC for a while so I'm not sure is what is causing my problem. I have bank statements indicating payments of my subscription to Adobe for this product update.

  Hi Seth,

  First of all, disconnect, then back into creative cloud, using adobe id to pay for your subscription.

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  Then, if you launch any product of CC 2015 and the pop up still shows a trial message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Hope this helps!

• I bought Lightroom 6 and when I open the application for Adobe Manager it does give me an option to download. Are they not turns on the map?

  I bought Lightroom 6 and when I open the application for Adobe Manager it does give me an option to download. Are they not turns on the map?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• The icon of my creative cloud that appears on top of the MAC, the box and when you open the application is displayed in white. It does not work. What should I do? Thank you

  The icon of my creative cloud that appears on top of the MAC, the box and when you open the application is displayed in white. It does not work. What should I do? Thank you

  Please visit:creative cloud is empty window why?

  Re: Empty opening creative cloud app

  Cloud Desktop App is empty

  I hope this helps.

  Concerning

  Megha Rawat

• create and manage users within the application

  I use the wwv_flow_fnd_user_api to build screens to create, modify, and remove users from the application.
  
  So far, it all worked ok - I was able to build screens to create, edit and delete users, but I have a problem with the change of password.
  
  I tried to use the rest_pw procedure, but I have no idea of what it does
  
  procedure reset_pw)
  --
  -This procedure resets the current user password.
  --
  p_user in varchar2,
  p_security_group_id in varchar2,
  p_msg in varchar2)
  ;
  
  It takes 3 parameters, and I assumed that the p_msg was the password is reset to the chain. I tried to change to just "password" password changes so far but I have no idea what is new. There is very little information on the use of this API.
  
  I also tred using the edit_fnd_user procedure and everything works except change the password. For some reason, it remains the same. I guess there is more to the management of password and I was wondering if anyone can shed some light.

  Colin,

  You should stick with the documented API as much as possible, for example, apex_util.reset_pw and apex_util.edit_user.

  The reset_pw procedure generates a random password and automatically sends it to the user, as well as the text of the message you provide.

  I need to see your code to try to debug the problem edit_fnd_user.

  Scott

• Debug button is missing (and can't debug the application by shortcuts) + other errors in Microsoft Visual Studio 2010

  For some reason, the Debug button is missing in Microsoft Visual Studio 2010. The other buttons that are supposed to run your program are missing as well and pressing on F5 does nothing, so I can't debug my application. The other stuff are still there, it's just that the buttons that the Debug program are missing (other ways do not work as well).

  You can get a faster response or better if you like in one of the dedicated Microsoft forums Visual Studio here:

  http://social.msdn.microsoft.com/Forums/en-US/category/visualstudio .

  Thank you.   :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• How to return to the previous screen on Pre apps? THETE´s no back button... just close the application and start over?

  for example with text messages once im in a conversation can how to return to the screen with all my converdations? It's the same with any of the apps, West no way to go back? should I always close the app and start again to go to the previous screen?

  You must not yet be aware of the gesture «back» It goes like this, the straight shot, left on the gesture area (the area below the screen, left and right of the Center button). You enter only at half way, and you can start on the right edge, or just left of the Center button.

  Become very familiar with this gesture he used all the time.

  There is also an option that you can activate by allowing a complete sweep in any direction will take you to the adjacent open card. I think that this gesture is set to off by default.

  Good luck.

  PS - In the application of Navigation of Sprint, I can't seem to leave the navigation once it starts. In other words, you must close the application and open again to define a new topic. I know two ways to issue the command to stop the navigation, but none of them work effectively.

  Message edited by Mrolesen on 21/06/2009 20:17

• Z10 Z10 crahses Blackberry BlackBerry; does not turn off button, and struggles to access the hub

  I just got a new blackberry Z10. which I believe has been refurbishing My Vodafone provider.

  The blackberry is so bad that they actually sent me a knew phone and does not want this return of blackberry but I am frustrated by the latter.

  When receiveing the blackberry, I got the unlock code to unlock it, it worked perfectly.  Once unlocked, I entered my Vodafone SIM that didn't do not need to still use it with another sim card.

  First, I updated the blackberry for the last version of the software and complete the set up process.

  Then I restored my old data from my previous Blackberry Z10, which also does not (various issues)

  The phone blocks (blocks) and did different things; the screen freezes and does not even turn it off the button, I have to take the battery out to restart it, or I have to screen does not freeze, but you cannot access texts/emails or contacts and he says 'prepare the hub' but never really in it.

  Sometimes it will allow me to use the off button, but especially, I have to take the battery out and put back starting.

  It is possible to make a call sometimes, but he cuts during the call.

  I have reset the blackberry back to the factory settings and even tried to use with on a restoration, just in case my data has been corrupted somehow.

  I tried to use it with a different network sim card and also tried it with a sim card, just so use it on wifi, the same problems.

  I was sent a new battery so tried both batteries.

  I have reset to factory several times.

  Any help would be appreciated.

  Linda

  It happens to any type of equipment.

• Start button returns to the grey button (and other oddities of the taskbar)

  The Start button on my Windows 7 taskbar occasionally (as in, ~ every hour or two) past the Windows ORB with a touch of gray with the word 'Start '.

  

  This usually coincides with another strange in the toolbar behavior, such as the icons of the application not responding not to the mouse, not leaving the task bar (the icon will be highlighted as the mouse is always above the icon).

  Restart Windows Explorer (explorer.exe) temporarily solves the problem, but it will reappear over time.

  Any ideas on how to solve this problem?

  It was clear that some third party software causes this problem. Then, you disabled the services of boot, goto the same configuration window and select the services that you have disabled, one by one, to determine exactly the service that is causing the problem. Remember, Veuileez restart the PC for each service that you select.

  This will let you know the service that is causing the problem, and if this service is not so important, you can disable the service permanently.

• Missing files in the Application directory.

  I just installed Adobe CS6 (I'm more used to it) on my computer. However, whenever I try to open the app, it just says, "some of the application content are missing from the Application directory. Please reinstall the application. "When I try to reinstall the application, it says simply,"Installer failed to initialize. This could be a missing file. Someone at - it solutions to this problem?

  Gus.Alves are you continue to receive this error?  If Yes, then I recommend Creative Suite 6 to uninstall and reinstall.  If you need a new copy of the retail installation files, they are available to Download Adobe Creative Suite 6 applications.

  If you continue to receive errors or have questions feel free to update this discussion.

• Click on the button to another page in the application

  Hello world
  
  Sorry for such a an easy question, but I just can not find an answer. I have a landing page where my clients can select one of two different applications to use. I created two html buttons and hold the buttons to direct the customer to the correct page in the application when you click it.
  What is the syntax to do this? I t should be easy and I wonder if I'm too difficult. Thank you.
  
  Derek

  Hi Derek

  http://your_server/pls/apex/f?p=100:1
  

  Would be the normal installation if you have not changed anything where you want to go to page 1 and request 100.

  See you soon

  Ben

• How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

  Hello

  I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

  Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

  Concerning

  Jamal

  I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

• My cat crossed the andf keyboard now I can't shut down my computer, I tried to push the button and also by clicking the close button

  My cat walked across keyboard and may have pushed some buttons. I can't turn off my computer, I tried the rinse button and also by clicking on the icon. How can I cancel it?

  Hello

  Press and hold the power button in until it stops.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">