Fax header

Similar Questions

• Photosmart C7250 AIO: Fax number in the fax header change

  How can I CHANGE the fax number in the header of the HP Photosmart C7250? When I go to settings and select Fax header Configuration, I get the screen to enter the text for my name, and then click OK and the fax number is displayed, but there is no way to change this. How can I change?

  Hello

  When you access the Fax header, definition FRO the printer screen, confirming the header once the fax number is displayed as described.

  Move the cursor using the arrow to the left until the first character is marked, enter the current number and replaces the listed value and press OK to confirm.

  Kind regards

  Shlomi

• My HP Officejet 4630e all-in-one does not print the date and time on the fax header

  I followed all the instructions of configuration / Date and time are set correctly but only name and phone number show on the fax header when sending fax.  How can I get the date and time to print as well?

  Thank you for your help

  Hi doggynut4,

  Welcome to the HP Support forums.  I understand that you want to add the date and time to your fax header.

  Your user guide indicates that only the name and fax number can be entered for the fax header (found on page 49). I even confirmed this on my Officejet 4630.  I apologise for any inconvenience this may cause.

  User's Guide e-All-in-One Series Officejet 4630

• HP 6310 - information header and Fax report

  We have all in a 6310. We seek to do two things.

  (1) we need to change the header information. How can we do this?

  (2) we get an impression of faxes that have been sent. I would like to have the number of were a fax has been sent.

  Thank you.

  Hello cronus68,

  To set the press header of Fax Setup on the control panel of the printer, scroll to number 4 (base configuration of the fax machine) and press OK, the first option should be Fax header so just press OK again.

  To print the report again press Setup, go to number 2 (print report) and press OK, go to number 6 (Journal of faxes) and press OK to get the journal by fax to print.

  Here is the link where you can find the manual for Officejet 6310:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?LC=en&DLC=en&cc=us&product=1119598&

• Header

  Anyone know if I can change the fax header that appears just before send you fax? I am running Vista 32 bit. I tried to change in MS Word according to HP, but it always happens with the default fax header.

  Thanks for the help, you probably miss understood the question. I found the answer in the words of Ms. How do to have a different header fax / first page.

• OfficeJet J4680 fax failure - need some tips from a pro!

  I have an OfficeJet J4680 and has a few problems. I send a daily fax for a number, and sometimes it sounds as if she's going through, but then the note of fax has failed is displayed. The Party on the other line said fax machine NOT ring although I distintly hear 5 rings, and then a noise indicating it connected.

  Also, sometimes there is a fast busy signal and of course, this does not work as well. I am told that I am the only person having problems sending their number. And some days, it works perfectly.

  I ran a Test Fax Rport and everything. Any suggestions?

  Hi Mylan,

  This looks like a problem on their side. Use the Service of fax HP Test to test your Fax to send & receive faxes.

  HP has a number of Test Fax Service to test fax HP products. It is available in the United States only. The telephone number for this service is 1-888-HPFaxme (1-888-473-2963). The fax service receives faxes and returns faxes within 5-7 minutes to the number in the fax header. Note: You must ensure that you have your fax header completely filled in with name and fax number or you will not get a fax back service.

• Fax HP Photosmart C410 connects to the telephone line at home instead of the dedicated fax number

  I have a Photosmart C410a.  The machine must be connected to the dedicated fax line, and number of this line was introduced in the fax header.  However, when tested using the FaxBack Service, fax back called the conduct of the House instead of connected to the fax line.  The machine is connected directly to the wall and there is no dispatcher, etc., with the home phone.  The telephone number doesn't have to all be typed them into the C410a.  Any thoughts you may have on what might be happening would be greatly appreciated.

  Best,

  Scott

  RESOLVED: The problem has been an error with the FaxBack service - my camera was working normally.  The best way to test your machine is either send/receive a fax with a friend or with HP customer support.

• Problem with the HP PSC Fax Journal report 2210

  In the printing of a newspaper report of fax on a HP PSC 2210 is all in one, there a way to change the name and phone number for the "log" fax transaction.  The current name and telephone number are incorrect.  I appreciate all solutions.

  It's the fax header, which is set up and sent with your fax, so the receiving party know who sent the fax.

  Goto the program installation and "basic fax settings" then "fax header", update the name and the number.

• How can I remove a name from a fax machine company, he appears near the fax number when received.

  When I send a fax the company name appears next to the above fax number when it is received. How can I remove that?

  I see you have a problem down the fax header the page or change.

  What kind of printer you have?

  Go to your settings on your printer. Go to fax settings. There should be option header of FAX under this menu.

  '"Click the WHITE STAR if you want to say thank YOU" '

  I hope this helps.

• Journal of faxes OfficeJet G series

  I have an OfficeJet G85 which reaches the end of its useful life, before to dispose of it that I want to erase all personal information only there.

  I have reset to factory settings and remove my fax header, but cannot see any way to clear log fax (history).  There is nothing in the manual, and the site search HP Web did not bring anything to the top.  My apologies if there is already an answer here, but I've tried various searches without result.

  Is there a way to do this and if so, how?

  Hello

  Reset the printer.

  (1) unplug the unit power cable fromback.

  (2) press and hold # and 6 while plugging in the power cord.

  It would be clearly all the settings of the printer

  Kind regards

  Dev

• OfficeJet 8500 has Pro Plus: elimination of printer

  Just to check what I've read.  I want to give my Officejet 8500 a Pro Plus but am concerned there may be personal information stored somewhere on the printer.

  Are there other data stored on the device, for example information copied from documents?

  If there is, how to remove these data.

  Thank you.

  Hello

  The only information stored in the device are the journal of faxes (a list of the last 30 fax jobs), any content as an original document copied is never stored on the memory of the device itself.

  From the Configuration Menu, select Tools, and then click Restore Factory Defaults and confirm.

  That should erase any personal fax header information / details, recall lists or fax log.

  Kind regards

  Shlomi

• Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

  Hello

  Someone knows how to change the time on a LaserJet MFP M127fn Pro?

  Thanks in advance!

  Sean

  .

  Hi @SeanKaneFLA ,

  I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

  This information was given by the manual on page 45. MFP LASERJET PRO.

  You may have configured these settings when you installed the software. You can configure these settings
  at any time by using the control of product or the HP Fax Setup Wizard panel.

  LCD control panel:
  1. on the product control panel, press the Setup button.
  2. Select the System Configuration and then select Date/time.
  3. Select the clock in 12-hour or 24-hour format.
  4. use the keypad to enter the current time and press the OK button.
  5 Select the date format.
  6 use the keypad to enter the current date and then press the OK button.
  7. Select Fax Setup, and then click Fax header.
  8 use the keypad to enter your fax number and press the OK button.
  NOTE: The maximum number of characters for the fax number is 20.
  9. use the keyboard to enter your company name or header and press the OK button.
  NOTE: The maximum number of characters for the fax header is 40.

  (Windows) HP Fax Setup Wizard

  1. click on start and then click programs.
  2. click HP, click the name of the product, and then click Fax Configuration Wizard.
  3. follow the on-screen instructions to configure fax settings.

  I hope this helps.

  Good day!
  Thank you.

• LaserJet 3030 - change the language from Russian to English

  I have a LaserJet 3030 and restored the Russian language.  I can't change back to English because I can't read Russian letters.  I tried to turn off the printer, but that did not work.  I used Google translate and plugged the words 'English' and 'language' to see how they look in Russian and looked in the menu, but none were similar.

  Because I can't read the words, I know not where I am in the menu sequence.  I read a post on this topic in this forum of 2004 with the same problem, but the link with the supposed solution was broken - probably too old. How the hell can I get the menu back to English when I can't read?

  Please respond when you stopped laughing.  Thank you.

  Hi all

  I waited a few weeks, but no brave response to get my printer is back to English.  Found the answer in a different way today, so I thought I'd share in case anyone else wants to happen.  Remember, I have a LaserJet 3030 printer, so I can't guarantee that this exact sequence will work for all other HP LJ printers.  It is a factory reset, so keep that in mind.

  Init NVRAM

  NVRAM init returns all the parameters in NVRAM to the factory default values or a default ROM value, according to the variable and performs a system reset. NVRAM init may generate the product to violate local regulations. Reset the language and country / region after having carried out the init NVRAM.

  Init NVRAM resets the settings and the following information:

  All menu settings are reset to the default factory, including the fax header and company name. As a trainer, number, pages factory settings and paper factory settings are reset. All faxes in memory are deleted. All the short group-dials and phone book entries are deleted. All location settings, such as language and national and regional, are reset.

  To run init NVRAM:

  1. Turn the product off.
  2. Press and hold down the * and buttons MENU/ENTER.
  3. Continue to hold down while you turn on the product. Hold down the buttons to the entire sequence of market.

  4 when the storage Permanent Init. appears on the screen of the Control Panel, release the buttons.

  5. when the message language appears on the screen of the Control Panel, the correct language and country/region value.

  6. let the product come back ready before using the product.

  7. jump for joy!

• Add model alternative to Windows Explorer new command (C:\windows\shellnew)

  If I click with the right button in Windows Explorer and select new, then I can do something like create a document new Word. I understand how wrt to recording and the key C:\windows\shellnew and how Windows makes a copy of a template etc. file. I want to know is there anyway to have two or more options in the contextual menu again, that relate to the same file extension (as the key C:\windows\shellnew is a subkey of the file extension) for example

  New Word Document [uses NullFile =]
  New (letterhead) Word Document [use FileName = headed.doc]
  New Word Document (fax header) [use FileName = fax.doc]

  Hi David,

  The question you have posted is better suited in the MSDN forums. Please visit the following link.

  MSDN forums

• J4680 all in a fake phone number

  Hello. I've just moved house, got a new phone number and set up my printer today to find on my test of fax, that he gives me my old phone number, not my other.

  Someone know how to fix this problem, please I need to send faxes and doesn't want to go with them a wrong number.

  I looked in the help of fax machine manual, and there is nothing about it.

  Thanks in advance.

  For some reason, the configuration information are not in the Fax getting started Guide, but it's on, pages 55 and 56 of the Guide of the user here, who said:

  Configure the fax header
  The fax header print your name and fax number on the top of every fax you send. HP recommends that you configure the fax header by using the software you installed with the device. You can also configure the fax header in the device control panel, as described here.
  NOTE: In some countries / regions, the fax header information are a legalrequirement.

  To set or change the fax header

  1. press Setup.
  2. press the right arrow key to select fax settings, and press OK.
  3. press the right arrow key to select Fax header and press OK.
  4. Enter your personal data and company names using the keypad, then press OK.
  5. Enter your fax number using the numeric keypad and press OK.