Fax HP Officejet 4500 Wireless will not send fax

Similar Questions

• One of the usual questions again - officejet 4500 Wireless will not copy...

  I have read all the post and tried many solutions, nothing works.  I get the message "unable to scan, fax, copy.   I'm at my wits end.  If there is something new or something that I missed about the resolution of this probem, I'd be grateful if someone could post. Thank you very much.

  Hi LizK1,

  This error message indicates a failure of scan.  It is difficult to overcome.  If you did not, try to do a Hard Reset as described in the following link.  Click here

  If this does not help, you might try to do a complete Reset of the Semi.  If successful, this reset the default printer and clear the memory.  If the printer was on a wireless network, it should be removed and would need to be reconnected.  If you want to try it, I can send the steps in a private message to your Forums HP in-box.  I need you agree to not post the stages.  Let me know what you decide.

• HP Officejet Pro 8500 will not send or receive faxes

  HP Officejet Pro 8500 will not send or receive faxes. 'Run Test Fax' indicates that everything passes.

  Then see HP support pages for your model, its their equipment & the fax is independent of the victory

• OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

  I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

  Hi @thrandall,

  Thanks for getting back to me.

  My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

  Have you tried these steps in my previous post?

• OfficeJet 4500 driver will not download to Windows 8 - "Download".

  Try to download the full Officejet 4500 Wireless download to a new PC 64 bit of Windows 8.1.  When download reaches 100 MB exactly, it stops: "download interrupted."  Click on 'summary' and downlaod again and 'interrupts' to 100 MB.  Tried with antivirus on and outside, on and outside printer.

  Thanks for your help, but I already got it to install using the Installation Wizard under "diagnostics and utilities" (or something like that) listed below the option 'download now '.  It worked perfectly (all 300-some MB) and worked as one would expect in (in other words, just like the installation from a CD that comes with a new printer).  HP really needs this option "front and Center" rather than downloading raw - I mean, who's going to think to go to the section "diagnostics and utilities; most of the people go just to see "start downloading now", click that and feel frustrated as I did. I have found that the wizard by chance, frustration.  I think most of the users are like me, they want a quick, easy and fool-proof to get the printer to work.  We are not in the manipulation of files or refreshing / re-installation of operating systems.  Keep it simple for us, the Luddites.

• OfficeJet 4500 wireless do not print with MacBook 10.5.8

  The device will scan wireless but will not print wireless or to the USB with the Macbook. The wireless shows the file sent, then after a few seconds clears the queue and poster printer ready, despite no action at the printer. Try USB port it hangs just showing printer busy, status: 0xe00002e9. The printer works on USB with an iMac. I have uninstalled and reloaded several times from the disk and downloaded the drivers on the HP site, which none worked. Any suggestions for how to get printing to work?

  Hello

  Is the 0xe00002e9 appears on the front panel of the printer or on Mac OS?

  If the error appears on the computer screen, I also suggest you try reset the Mac printing system:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  In the Apple menu, click System Preferences.
  On the view menu, click Print & Fax. Dialog print & fax opens.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now, click on the sign more, select the printer in the list and try to print again.

  Is there a difference?

• OfficeJet 6700 Wireless will not be installed

  I tried to connect my officejet 6700 without cable.  I am able to get the printer to connect to my network and when I print a wireless network test, it says that it is connected, switch on everything.  I am able to ping the printer as well.  At first when I tried to set up the printer, my computer could not find the printer.  Now, it seems that it can find the printer, but it will not install. I used the HP print and scan doctor, and he said that I had to install the full version of the software that comes with the printer. I tried to reload the software that came on the disk with the printer, and will not install successfully.

  Hi Wally,

  Thanks for the reply.  I am running windows 7 professional 64-bit.  He just said "installation failure," anything else.  Since my last post I was able to chat online with an hp support person, and they made some kind of a work around.  Instead of trying to install as an officejet 6700, installed the driver for a deskjet 6950 and added a protocol TCP/IP port with the IP address of my printer, and that seemed to work.  It is now printing from my computer and my iPad.

• HP OfficeJet 4500 Wireless: OfficeJet 4500 Wireless does not print

  I just inherited this printer and it's a step above my F380, I installed it.

  It scans very well and sending scans to the computer, but when I try to print or copy, even if it goes through the process (the book covers and print heads move back and forth) nothing appears on paper.

  The cartridges that came with the printer I record as being almost 100% and I ran print and scan doctor nothing is done.  The Test Page 'prints' white also.

  Is there anything else I can try before you buy new cartridges?

  TIA

  Try these videos Youtube here.

  https://www.YouTube.com/results?search_query=OfficeJet+4500+PRINTHEAD

  Find out more if necessary.  If no joy, your printer is toast.

• HP Officejet 4500: Scanner will not install or scan

  Please help me!

  I used to have a HP 3050 I tried to delete the drivers and the unintall when I installed the 4500 (it won't do). It prints to the 4500 however it won't let me scan the guard looking for the 3050. Thank you for your help.

  Hi @betty455,

  Welcome to the HP Forums!

  I read your post about how you can scan or install your HP Officejet 4500 printer. I'm happy to help you!

  A few questions for you:

  1. What is the operating system that you are using? Windows or Mac? https://www.whatsmyos.com.
  2. How is the printer connected? Wireless, Ethernet or USB?

  In the meantime, if you are using Windows, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope hear from you soon!

• HP officejet 4500 printer will not print on the new Windows 7 computer

  My new gateway computer recognizes my hp office jet 4500, but it will not be printed. What should do?

  Have you actually installed according to the instructions from HP, which is to use the installation cd HP or HP site features complete downloading, connecting only when the installation says too much, or simply plug in?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3919449#n195

• OfficeJet 6500 Wireless will not print black ink. Replaced by the new basket.

  Wagon seems a little different from my previous. I have windows 7 64 bit operating system.

  When you have changed the cartridge, the printer tried to automatic alignment?  How it went? (Success or failure)

  So, you did a printhead cleaning (3 levels is preferable in this case)?

  * Press the key on the front panel of the printer

  * Press the arrow on the right for tools, then press Ok

  * Press the arrow on the right for the clean Printhead and press Ok

  I also remove the black cartridge in the printer and try to clean the electric contacts with a clean, lint cloth and water.  Also wipe the contacts in the printer (make sure it is turned off during this operation).

  There is also a document with the steps to solve a problem of printing such as this one.  The document can be accessed here.

  If you get to step on replacing the printhead, then you have two options.  This being a wireless Officejet 6500 (E709n) it is probably out of warranty.

  (1) we can try the workaround provided by Bob_Headrick in the thread found here.

  (2) you can buy the print head since with CN643a part number HP parts store.  The print head sells currently for about US $70.

  (3) you can buy a new printer because it would be not much more than the printhead and would come with a full factory warranty.

  I hope this helps.

• HP OfficeJet 6500 wireless do not print because there are 2 days, I changed my wireless router

  Original title: print printer print

  My HP OfficeJet 6500 Wireless will not print because 2 days ago, I changed my wireless router. The printer is no longer under warranty and I'm using Windows 7 OS. I have

  Assuming that there is a wireless connection to the printer, the most likely cause of the problem is that the printer is configured to obtain its IP address automatically, and the new router has assigned to the printer an IP address that is different from that which was initially awarded.

  To check if the above is the question:

  Controls on the front panel of the printer allows you to print a Network Setup page:
  From the home screen, press the right arrow, and then select Setup.
  Touch reports, click Network Configuration Page.

  Find the IP address of the printer on the Network Configuration page.

  On your computer, go to devices and printers

  • Right-click on your printer icon, and then select "printer properties".
  • Click the "Ports" tab
  • WITHOUT clicking anywhere in the list of ports other than the right scroll bar, find the line highlighted (the one with the box in the box)
  • Is the 'Port' the same as the IP address of the printer that you noted on the Network Configuration page?
  • Assuming that the port in the printer properties dialog box is not the same as that shown on the Network Configuration page, click the "Configure Port" button and enter the correct IP address in the box "printer name or IP address.
  • OK your way out

  To avoid this problem does not happen, read the User Guide for the your printer and configure the printer to use a static or fixed IP address.  Choose an address that is in the same subnet as the router but outside the range of addresses used by the DHCP server on the router.  You can find this information on the configuration of your router utility.

  For example, most Linksys/Cisco routers use the IP addresses of the form 192.168.1.x and allocate addresses in the range 192.168.1.100 to 192.168.1.150.  In this case, you should take a static IP as 192.168.1.20 (20 is outside the range of 100 to 150).

• Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

  Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

  Thanks for the reply.  HP has called since then and was finally able to install the driver.

• OfficeJet 4500 G510n-z: failure sending a fax from Word G510n-z

  I use a laptop Toshiba Satellite running Windows 10 with, AFAIK, updates. I am trying to send a Word document by fax to my connected OfficeJet 4500 wireless. The printing process works, I get the dialogue Send Fax, I dutifully fill. The document goes to the queue from print, then disappears. The printer is not composing or anything; the document will just in the bit bucket, without error, not even in the case log.

  Other relevant details:

  • I tried reinstalling the drivers; After several hours the skin of HP software, I did.
  • The laptop has 3 printers associated with my physical device: 2 printers generically named ' HP OfficeJet 4500 G510n-z ' and ' fax HP OfficeJet 4500 G510n-z "; and "HP # (HP OfficeJet 4500 G510n-z) ' (where # is a hexadecimal number of device-specific, I'm not willing to share here). The third argument prints correctly to the book.
  • I can scan documents through the HP Support Center application.
  • Copy and fax work correctly to the device itself. For example, if I have first print the thing, I want to fax, then by fax using the document feeder and the front of the device, it connects and sends the fax correctly.
  • The last time I checked, I was able with a fax in a program on my archaic Macintosh.
  • To repeat the foregoing, no errors are displayed or saved. Each attempt appears in the Fax as "Completed." log I don't want to get all the answers canned on the subject, thank you very much.
  • I browsed this forum of the community and support site and tried what I could find and understand how to do in Windows 10 of bugs. (Disclaimer: I've always been a Mac person and a VMS/Mac/Linux software developer, to try to understand how to do something which expected to be simple in Microsoft mess was not easy for me.) It is not suggested with a laptop given to his wife by a friend, however.)

  What unconscious thing [sic] I'm missing?

  Hello

  Please, look at the next post and make a good choice:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/want-to-send-fax-from-PC-in-HP-OfficeJet-4500-all-in-one/TD-p/1443895

  Kind regards.

• HP OfficeJet 4500 Wireless: lack the hpsupportsolutionsframework.msi file may not install/uninstall

  I got caught by the Windows default update from 7 to 10.

  10 was a little bug, but I gave him a few weeks to see if it could be arranged.

  Yesterday, I got a notice from HP that I needed to upgrade my printer software, so I did, which was my mistake, it seems.

  The upgrade process didn't go smoothly and in the end, I had no way to access my printer/scanner, the HP solution Center which I use to make my scanner was gone.

  It's been half a day trying to solve this problem, including downgrading to Windows 7 and to uninstall and reinstall the printer software, but nothing works.

  A critical issue seems to be an error message I get that said file hpsupportsolutionsframework.msi is missing from the temp/local directory.

  So, how do you return this file?

  At this point, I'm pretty disappointed with HP, because I just followed the advice you guys to make a necessary upgrade.  everything worked fine before this.

  Hey @Hermitaño

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the software for your Officejet 4500 Wireless all-in-One Printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Click Start and in the bar look in %Temp%, and then press ENTER.
  2. In this folder, find the folder whose name starts with 7Z.
  3. Open the folder util/ccc.
  4. Run L3_uninstall.bat.
  5. Restart your PC.
  6. Download and install the latest drivers for your printer by clicking on this link.

  Please let me know the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.