Fax Monitor

Similar Questions

• In Windows Fax and Scan, I can't get the Fax Status Monitor to open

  When you send a fax status monitor does not open. I have activated Windows Fax and Scan feature and turn it on. I also deleted all the registry keys. I reinstalled the modem (everything is good). I have tested the phone line (everything is good). How can I fix Windows Fax and Scan? He has worked in the past. Should I reinstall Windows 7?

  Hi Raoult,

  Check the settings and fax and scan, try the following steps:

  i. open Fax and scan

  II. click on tools

  III. Select fax settings and click on the monitoring tab

  Click the following to adjust how to be informed about the status of a fax sent or received. By default, all notifications (appearing under the name of pop - up balloon notes), fax settings of the monitor and sound options are enabled

  IV. ensure you that you check all the options listed in the below location (under notifications and Fax Monitor)

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need to find and replace any missing files from XP MS Fax

  Hello.  My computer is a HP Pavilion a1430n, double quick March, media library.  Quite awhile back, I got some virus problems, and when I got rid of the virus I have deleted some files XP fax as well.  I can still send a fax, but cannot get the fax monitor to open or view what I send you after the cover page.  Will someone please tell me how to fix my fax?  In addition, I don't know how I ended up in Vista, because it is XP.  Thank you for your time.  Sincerely, Cindy

  You should be able to do that in ' Control Panel | Add/Remove programs. Add/Remove Windows components.  Uncheck remove to allow complete and Fax services (which allows to uninstall Fax), then repeat the process and replace the check mark for re - install the Fax components.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Question of LaserJet M1319f MFP Installation on Windows 7

  Dear HP team and community members to support,

  I am currently trying to install HP LaserJet M1319f MFP connected via USB on Lenovo Q190 machine /Intel Core i3 processor / freshly installed running Windows 7 Enterprise 64-bit with Bulgarian language pack, all updates, Microsoft Forefront Protection/i also tried to disable the real-time protection /, UAC disabled, account administrator, IE 11, .NET Framework 4.5.1.

  The priter work properly with Windows XP.

  I downloaded the package of driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=bg&dlc=en&sw_lang=&product=3547...

  After reached installation process 'Copy of the files on the hard disk' stage Setup returns error software install printer no longer works.

  I tried to run with Windows XP SP3 compatibility mode or administrator privileges, but the same error occurs.

  I tried Microsoft Fix It software to install/uninstall drivers too, but without success either.

  I cleaned up the temporary files and Max about 10 to 15 times.

  Windows update is not help with drivers too.

  I tried to extract the Installer files and manually add the printer and received the error that the installation was not successful and it says below the file is not found / if I remember it well.

  After that I tried the HP Print and Scan Doctor software, but it shows that there is no driver installed and redirect me to the driver download page.

  I tried the Assistant driver software also, but it returns that this model is not supported.

  I tried to change the Startup Windows "Selective startup" with "Load Startup items" unchecked and all non-microsoft disabled services, but without success.

  Under safe mode that will not accomplish the install because the print spooler service does not, which is running normally otherwise.

  The "ntprint.inf" file is present in the folder 'Windows\inf', HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x 86 registry has only subkeys drivers and print processors and the HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors registry has only Local Port, Microsoft Shared Fax Monitor, monitor the Standard TCP/IP Port, USB and WSD port subkeys.

  The Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 folders are empty.

  I ran sfc/scannow in cmd with administrator privileges, but there was no violation of integrity.

  I tried to disable the IE component, but no luck either.

  So now I'm out of ideas how to connect that * bleep * thing... I hope someone can help me with this problem.

  "Hewlett PackardHP LaserJet M1319f MFP" currently devices without driver installed in Device Manager /Hardware ID USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/ and Scanning HP /hardware ID USB\VID_03F0 & PID_5817 & REV_0100 & MI_00 and USB\VID_03F0 & PID_5817 & MI_00.

  I forgot to mention that I tried all kinds of variations with these solutions with or without connected printer.

  Thank you very much in advance for all type of guidelines.

  Best regards

  Ivan

  P.S.: at least, I think that I managed to collect all related solutions in this topic...

  Dear Gemini02,

  After a few days of trying different types of solutions, I finally managed to install the printer as a network device.

  So basically, I also had a problem (error 0 x 002) with the installation of the printer as a network printer. Restart the Printer Spooler service has not worked and erase cache files did not work either.

  So I installed x 64 driver on the host machine and then installed the network printer. For those who do not know how to install x 64 drivers:

  -Download the drivers from the official HP support page

  -Check out the *.exe file in a folder (if you don't have additional archiving program replace *.exe with cover and unzip it with the build Manager). Navigate to the folder 'x 64' and extract the file "LJM1319L.cab" to separate the folder.

  -Go to 'Printers and faxes' ("devices and printers" in Windows 7 ")

  -Then right click on the shared printer already and click on 'Properties' ("printer properties" Windows 7 ")

  -Click the 'sharing' tab and click on "additional drivers".

  -Select 'x 64' or only ' IA64"in the case that your hardware architecture is demanding and click 'Apply'.

  If you have already installed the drivers, the rest is not relevant, but if you do not:

  -Open the extracted folder and select the file "HP1319fp.ini" (if it returns select error 'HPM1319.ini')

  -When he asked the second time pilot open 'x 64-> LJM1319L' and select the *.dll file

  -on the third request for drivers go to 'x 64 English-> PrntDriver' and select 'ZSD1319P'.

  I couldn't try to connect and install by USB (the office that I am taking care, as if it were new post more), but after the successful installation of the drivers that the printer connected locally should also work perfectly.

  So I hope I was help someone like me about this and still do not understand why I should have done everything for installation driver simple?

  Best regards

  Ivan

• HP ENVY 4500 E - ALL - IN - ONE: HP ENVY 4500 E - ALL - IN - ONE DOES NOT PRINT

  I can't print from my desktop PC with an ethernet connection, but I am able to print from my laptop with a Wi - Fi connection.

  The printer used to work on my desktop PC, then I upgraded to Windows 10, made the operating system was not entirely compatible with my PC, reformatted it with the help of remote support Microsoft, back to Windows 7, had a lot of problems with Windows Update and WIndows Installer and so also with the installation of the driver.

  I tried installing from the original installation CD HP Envy with no luck, uninstalled and reinstalled with the latest driver from the HP website with no luck and since (apparently) to solve the problem with Windows Update and WIndows Installer, uninstalled and reinstalled the driver software on the CD again with no luck.

  I tried all the suggestions on the forums, with my computer hang too for the first time in weeks at the recommendation of msconfig on your forum for disabling startup programs.

  The scanner works.

  Sometimes, in Word, I get a message error "Windows cannot print due to a problem with the current printer setup". Sometimes I have no message.

  (I use Service Pack 1)

  Hi HPAGJ,

  Thank you for coming back to us.

  Gemini02 is currently out of the office so I thought jump in and help.

  When you run the PSDR, have you selected the connection "network (192.168.2.107) is not installed? Being not fully installed is causing the problem.

  There is corruption on the computer, this can certainly occur after you upgrade your operating system. I suggest to try the following steps in the following order for best results.

  • Make sure that all of your Windows updates are up-to-date.
  • HP printers - uninstalling the software of the printer (Windows)
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  Manually delete the print driver:

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
  c:\windows\system32\spool\drivers\w32X86
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
  If there are any keys other than those listed above, follow these steps:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
  If there are any keys other than those listed above, follow these steps to remove them:
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  • Download HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  If you are still having problems try:

  • HP print driver printer - install and use the built-in Windows

  If all else fails, I create a new administrator account and try to reinstall:

  • The difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Spooler subsystem app stopped working and was closed.

  When spooler subsystem app stopped working and was closed, which is causing this problem and how can I reinstall it and continue to use my computer, I installed a new program on my computer?

  Hello
   
  1. What is the name of the program you are trying to install?
   
  2. you receive an error code?
   
  3. what happens when you try to print?
   
  Refer, http://TechNet.Microsoft.com/en-us/library/cc766474%28V=WS.10%29.aspx
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  In Windows Vista:
   
  a. click on start
   
  b. click Control Panel, click programs and features,
   
  c. click on Turn Windows features on or off, expand Print Services, clear the LPR Port monitor check box and select the Internet printing Client, and then click OK.
   
  If the steps are still not then continue to.
   
  Method 2
   
  This problem may occur if a printer driver that is installed on the computer is damaged.
   
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  322756 how to back up and restore the registry in Windows
  To resolve this issue, delete the printers and drivers for printers, then remove the items that are under certain keys in the registry. Follow these steps:
   
  a. If possible, remove all of the printers that are listed in the Printers window.
   
  To remove a printer, right-click the printer in the Printers window, click Remove, and then click Yes to confirm the deletion.
  
  (b) in the Printers window, on the file menu, click Server Properties.
   
  c. on the tab drivers, remove all the installed printer drivers.
   
  d. to remove a printer driver, click the driver, click Removeand then click Yes to confirm.
  
  Start the registry (Regedit.exe) editor.
   
  (e) export the following registry keys:
      HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print
     
  f. remove all items listed under the following keys (do not delete the keys themselves):
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-2
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
  
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-2
  
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-3
  
  g. remove all items listed under the following keys by default:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Monitors
  
  The list of default monitors includes:
  AppleTalk printing devices (when Services for Macintosh is installed)
  
  BJ language monitor
  The local port
  PJL language monitor
  Standard TCP/IP port
  USB Monitor
   
  
  "Windows NT Fax Monitor (if a Fax Modem is installed)"
   
  For more information on the items are not by default, click on the number below to view the article in the Microsoft Knowledge Base:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  
  h. remove all items listed under the following keys:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Printers
  
  I. close the registry editor.
  J. restart your computer and reinstall the necessary printers.
   
  I hope this helps.
   
   

• After Windows update - drops Printer Spooler - Tacker system VISTA

  This same problem happened to me in the summer 2010 - around July.  It's still - righ after a windows update.

  Things I've tried-

  1) goes into services and restart the print spooler.  It will restart - but remains in place.

  2) enter c:\windows\system32\spool\printers. and deletion of files.

  (3) remove and reinstall the printer involved.

  (4) has) go to programs and features in Control Panel > on features Windows turn on or off

  (b) click + sign printing services

  (c) select LPD and LPR. You must remove the Internet printing Client. > restart your PC to ensure there is no error in the spooler service.

  I am running VISTA for an operating system.  I also run the function of remote server in Accessories fairly.

  Hello

  I suggest you remove all installed printers and reinstall Windows Vista printer drivers if they are available.
      
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
   
  If the problem is not resolved, I suggest that you clear the money printing system.
  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
   
  c:\windows\system32\spool\drivers\w32X86
   
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
   
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
   
  If there are any keys other than those listed above, follow these steps:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
   
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
   
  If there are any keys other than those listed above, follow these steps to remove them:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  It will be useful.

• DeskJet 3050 a: Deskjet 3050 a prints blur sometimes, new drivers, alignments, no cleaning, no joy.

  If I print a test page for the printer it comes out perfect.

  If I print a test page for Windows7 it comes out perfect.

  If I right click and highlight text when it is on the internet and press print it comes out blurry.

  Print an e-mail comes out blurry, even as wordpad.

  Basically, but no test pages come out blurry, unless I do a google search and find a random test page not associated with Win7 or HP which will be blurred.

  I tried new drivers, ink cartridges are fairly new, but they were good job and forwards the problem.

  I did several cleanings, alignments, not troubleshooting, no joy.

  He has been connected to the same USB port, worked many years.

  No updates of windows 7 or changes.

  No matter whether this printer is default, I also have a Canon iP2600 and it works perfectly, it was also in the years of system, once again no change, I can't see that would not cause this problem.  There is probably a change, but it is over my head as to what.

  Thank you

  Hi @bobscloud,

  Welcome to the Forums of HP Support!

  I see you are having problems printing with HP Deskjet 3050 a printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrating, it would be for you. You mentioned that you uninstall and reinstall the HP software. Looks like the drivers are corrupt, it is necessary to clean your system and try to reinstall again.

  Is the Canon iP2600 that printer as plugged in USB?

  You say that ' no updates Windows 7 or changes ", you have automatic updates is turned off? Please make sure that your Windows updates are up-to-date.

  When you install a USB printer, it is recommended that you disconnect the other USB printers during installation. In this way, the computer does not confuse the two and installs the correct driver.

  You unplug the Canon before reinstalling the HP Deskjet printer?

  I suggest to try the following steps in the following order for best results.

  • Utility of Microsoft Ms difficulty, diagnose and automatically fix the problems of the printer and printing.
  • How to troubleshoot Windows Installer errors.
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  If the problem persists, I will try this solution.

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
   
  If the problem is not resolved, I suggest that you clear the money printing system.
  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
   
  c:\windows\system32\spool\drivers\w32X86
   
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
   
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
   
  If there are any keys other than those listed above, follow these steps:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
   
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
   
  If there are any keys other than those listed above, follow these steps to remove them:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  If all else fails, I create a new administrator account and try again, difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Photoshop CS6 crashes when printing

  From a few weeks ago, Photoshop CS6 hangs everytime when you select the print with the error: "Adobe Photoshop CS6 has stopped working".

  This produced using different printers and printing anything, including a blank page.  Fine printing from other applications.

  Photoshop CS6 v.13.1.2 x 32 running on Windows 7 Professional 64 bit

  It is a Dell Optiplex 990, I7 3.4 GHz, 4 GB RAM, 250 GB drive HARD system, AMD ATI RADEON HD 6350 PCIe graphics card on a bus of 16 x

  (1) Photoshop has been updated

  (2) OS has been updated

  (3) video drivers have been updated with the new from the manufacturer

  (4) I tried new drivers for our Kyocera TaskAlfa 3550ci

  (5) I tried new drivers for our Kyocera FS-3140MFP

  (6) I also tried to delete all printers except 'Adobe PDF' printer

  This is an event for example from the Windows application log after that photoshop crashed.

  The failing application name: Photoshop.exe, version: 13.1.2.0, time stamp: 0x50e86403

  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b60

  Exception code: 0xc0000374

  Offset: 0x000c380b

  ID of the process failed: 0xa0c

  Start time of application vulnerabilities: 0x01ce355706f614ca

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CS6\Photoshop.exe

  The failed module path: C:\Windows\SYSTEM32\ntdll.dll

  Report ID: 4fd602eb-a14c-11e2-b31d-180373d687c0

  Please let me know if there is any other information, I can provide.

  Our current solution is save a jpeg and then print with another application of paint.

  Any help is appreciated.

  Thank you

  This seems printer specific driver. Have you tried recently updated printer drivers from the website of its manufacturer. If it is already set to day and always crashing then please follow these steps:

  Remove a printer

  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.

  2 find the printers installed icons, then delete them.

  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".

  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.

  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

  6. try to remove all related printer software.

  If the problem is not resolved, I suggest that you clear the money printing system.

  Step 1

  ======

  Start Windows Explorer, and then rename all the files and folders in the following two folders:

  c:\windows\system32\spool\drivers\w32X86

  To rename a file, we can click with the right button on the file and select Rename.

  Step 2

  ======

  1. Click Start, type REGEDIT in the start search bar and then press ENTER.

  2. navigate to and then click the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86

  View the list of subkeys. There should be only the following subkeys:

  Drivers

  Print processors

  If there are any keys other than those listed above, follow these steps:

  a. on the file menu, click Export.

  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.

  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.

  c. delete all keys other than drivers and print processors.

  Step 3

  ======

  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:

  BJ language monitor

  The local port

  Microsoft Document Imaging writer monitor

  Microsoft Shared Fax Monitor

  Standard TCP/IP port

  USB Monitor

  WSD port

  If there are any keys other than those listed above, follow these steps to remove them:

  a. on the file menu, click Export.

  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.

  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.

  c. delete all keys other than the above 5.

  Step 4. Disconnect the printer from the computer and restart the computer.

  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.

  You can also use these two articles for this problem:

  http://support.Microsoft.com/kb/2000007

  http://support.Microsoft.com/kb/933454

  HTH

• p6727c: HP Digital Imaging Monitor

  HP Digital Imaging Monitor does not recognize my 6500 all-in-in-one in an attempt to check after moving from Win 7 to 10 to win. When my OS is Windows 7, I was able to scan without any problem. Immediately after the upgrade to WIN 10, HP Digital Imaging Monitor can no longer detect my 6500, so, I can't scan with this app. Can I print using the word. I can scan using HP print and doctor Scan and printing Windows Scan. I would use Windows print and Scan, but it does not save the scan to PDF, which I use when emailing analysis to others. I saw the 6500 app load (do not do this manually) and I ran a report of my office to test FAX after the load so the 6500 is recognized by some applications. Any suggestions on getting the HP Digital Imaging Monitor to work with Win 10?

  Problem solved. By clicking on the HP Digital Imaging Monitor icon in the task bar previously launched HP Digital Imaging Monitor, which I expected; but he sees not the 6500. However, by clicking on the icon same spear Center Solutions HP without openly update or load anything else. HP Solution Center sees the 6500 and I can scan and save to the PDF format as before. I suspect that the HP Solution Center was launched in the past vice HP Digital Imaging Monitor. Before posting the original message, I rebooted my PC several times, checked for Windows HP updates (there were not), disconnect and power the 6500 and specifically wanted to win 10 version of HP Digital Imaging Monitor all to nothing done.

• PROBLEMS of FAX Toshiba E-Studio 250

  Hello!
  I don't know if this is the place to post my problem...

  I have a Toshiba E-Studio 250, and I have a problem of fax.

  I have a fax / Tel (RDS & RCS - my local provider) connection

  Now, my problem:

  When I am reciving a FAX - my 'PHONE' will Flash for a few seconds and nothing happens.
  When I'm sending a FAX same old story, the 'PHONE' flashes and nothing happens.
  If I press the "MONITOR" button, I heard the fax tone.

  My Toshiba has a 'LINE' jack so I divided the two-1 cable cable goes on the phone and the other in the Toshiba.

  Hope you understand my English is not so good. Thank you one Please HELP! (I'm desperate)

  Hello

  It is a forum on the problems of laptops and options & Accessories questions.
  If don t think that if someone would be able to help you here, but I found a manual for the 250 e - Studio
  http://www.Toshiba-SA.NET/download_operator_manuals/e160_200_250/e-STUDIO_160_200_250_Operators_Manual.PDF

  Here you can find the Support from Toshiba page to print, copy, Fax, Scan and e-mail devices
  https://electronicimaging.Toshiba-Europe.com/

• OfficeJet 6500 has more fax keyboard disabled

  Hello experts,

  I have a printer officejet 6500 has more, and I have questions sometimes when you send a fax.

  In some cases, after dialing the phone number of receiver, automatic voice ask redirect the fax to a number given (eg. "dial 26 Fax").

  Anyway, the keypad of the printer is disabled after dialing the phone number and I can not send the fax. How can I activate the keyboard when calling the digit numbers requested by automatic voice?

  Hi there ofblack, welcome to the forums

  I saw your post on the fax concern you have. First of all, I suggest you to check on the Page. 48 of the User Guide , which is to monitor dial to see if this information will help you. As long as you enter the numbers fast enough, the fax needs to work with the numbering screen, otherwise, you will need to use the phone to enter all the guests under send a fax manually from a phone.

  This guide is the standard troubleshooting for fax so that might help: I can't send or receive faxes

  Have a great Thursday

• I upgraded my dsl moden and now my fax does not work, dell all-in-one, keeps saying no device found

  my fax was working but I got my dsl moden improved and now I can't fax from my dell all-in-one monitor fax says device not found. I tried to reinstall moden using the disc, but it gave me an error code 53, not able to install, is the problem in the new moden or something current?

  Contact Dell for assistance with their equipment.  This does not sound like a Windows problem.

• By default the monitors of the printer in the registry missing__

  I have problems with a printer/scanner.  Then, I started to follow all the procedures in your forum on the problems of printer and usb.  I came to the procedure which you enter in the registry underHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors

  the subkeys for the default printer monitors are missing.  How can I restore them?  Not having is not the default printer monitors will prevent from appearing in the box printer/Fax printer?

  The spooler starts very well.  I have WinXP SP3 on my pc. Anti-virus software McAfee with automatic updates of cox.  AMD athlon 2000 + 1.66 ghz, 80 g HD, 2 GB of ram.

  What is a thread?

  Here is the part of the info I'm talking that I copied from one of the forum questions answered, below.

  When you click Start and then click Printers and faxes to try to view your printers, no printers appear. This problem may occur even if you have a printer installed.

  Thirdly, remove the registry entries for the default print monitors

  Remove the print monitor subkeys can be problematic, which can interfere with the printer you want to use. These may have been installed by the installation programs third-party printer. Follow these steps to keep the print monitors and comes with Windows registry entries and remove all others who may ask questions.

  Start the registry editor if it is not open. To do this, click Start, click Run, type regedit in the Open box, and then click OK.

  Search for, and then expand the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\MonitorsView the list of subkeys. It should only be the following subkeys for the default print monitors:

  ·       BJ language monitor

  ·       The local port

  ·       PJL language monitor

  ·       Standard TCP/IP port

  ·       USB Monitor

  If there are any subkeys other than the subkeys listed in step 1, do the following:

  On the file menu, click Export.

  In the file name box, type the name you want to use for this key, such as MonitorsRegkey and then click Save.

  When I looked in the registry, under regedit.exe, monitors default printer in bold above weren't there.  How can I restore them?

  I just wanted to say thank you very much!  That was the problem with my printer does not.  Once I loaded the info above in the registry and restarted the system, my printer has appeared in the box printer/fax and I was able to print a test page.

  Thanks for your help!

  amber6

• MY PC CANNOT RECEIVE FAX OJ4500 WIRELESS; Download Manager HP stops when I try to use it.

  I have configured my OJ4500 for my PC receive all incoming faxes to the AiO OJ4500. I noticed that the HP Digital Imaging Monitor is missing in the systray and I don't know how to get it back. I think it's one of the reasons why I am unable to get the incoming faces sent directly to my PC. I have properly configured it from my PC through the center of HP solutions as well as fact the good implementation of the control panel of the unit.

  My PC operating system is Win7 64-bit.

  The HP Download Manager does not start. I get say error message that there is a problem and must close. I've uninstalled and reinstalled the software, but this has not solved the problem.

  Can you help me?

  Norma Ramirez

  {Information}

  Right-click on the program, and then select Properties.  Click on the Compatibility tab.  Select run as administrator.  Click on apply to save the changes.  Click OK to close the window.  Document manager should now automatically run as administrator.