Fax through Windows Server 2008 R2 Std issues.

Help!  I get "Fatal errors" faxing as well as "send faxes with the help of the selected printer, you must first create a fax account".  messages.  These two happen to Windows 7 Professional PC Fax via a Windows Server 2008 R2 Std fax server.  Unrecoverable errors are somewhat contradictory, but rather ordinary, but the "must first create the account" error whenever a workstation.

On the workstation "must first create the account", it actually sends the fax but the error is misleading for the user.  I removed the fax services in Control Panel, the Windows on the desktop features, rebooted, removed the server account, restarted the server, fax services added the services of fax to the workstation, rebooted, reconnected to the fax server and get always the same message.
On the workstation "Fatal error", I tried tweeking with the settings of the modem (flow control, modem speed, etc.), but still not that problem.

I hesitate on the removal of the fax from the server server role that I have more than a dozen represents the sending and receiving of faxes by him now.
Someone has any suggestions, and if I do not remove the Fax Server since the Windows Server 2008 role when I add I get the same settings as before?
Thank you.

Hello Joel Schaefer,

Your question about Windows Server 2008 R2 would be better treated in the TechNet for ITPros forums. Please repost your question in the here a link to the forums of Windows Server 2008
The experts, it will be able to help with your fax number.

Thank you

Marilyn

Tags: Windows

Similar Questions

  • When installing ha6 on windows server 2008 R2 compatibility issue

    Hi, I want to install Virtual Studio 6 on windows server 2008 R2 (to run our legacy code). I encountered the problem of compatibility: "virtual studio has a compatibility issue with this version of windows.

    I tried the steps below:
    1. right click on "setup.exe" and select "Run as Administrator"
    2. run in compatibility mode, such as windows XP sp2.
    It does not, someone who can help on this? Thank you!

    Hi Weihe,

    The question you have posted is related to the Virtual Studio 6 installation on windows server 2008 R2 and it would be better suited to the TechNet community.

    Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

    Hope it will be useful.

  • Windows Server 2008 R2 DNS issue

    Hello

    I created the new domain and try it now one of the boxes to Office XP. The issue I'm having is I cannot join the domain using domain FULL name, but I can join by using the NETBIOS name. I can ping the server by name and IP address, but not by servername.domain.com. When I run NSLOOKUP two devices, PC and server, see each other, although, again by using the NETBIOS name by domain name opposition.

    While pushing, I thought when I was joined to the domain I used domainname.com without omitting the .com part and when this does not work I used the NETBIOS name. Thus, it will throw on me, that was the question. At the same time, I joined the field by using the NETBIOS name and ultimately it belongs to domainname.com, but again, when I connect the domain listed in the login screen is the NETBIOS name, not domainname.com. I still cannot ping it and it's the home LAN.

    Any direction is greatly appreciated.

    Hi, MLS,.

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • Windows server 2008 R2 Standard hangs so that closing

    Hello

    We are a microsoft partner

    one of our customer have hp ProLiant ml servers 310th gen8 v2

    they installed windows server 2008 R2 std, when they tried to stop the server, he clings on and manually close

    can you please solve this problem

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Windows Server 2008 fax and scanning... .cannot connect fax modem

    Hello

    I am running Windows Server 2008 R2. Recently, apparently after you install some automatic updates when the server unexpectedly shut down several weird errors are produced on the machine. First to be noticed was that faxes were more to be received. While they inspected more, the fax service had stopped working and could not be restarted, such as the Windows event log. After searching for some time, a solution was found here: http://social.msdn.microsoft.com/forums/en-US/windowscompatibility/thread/c75ae899-d05b-411d-a7f2-00fdd33b8589/

    Fix Subinacl.exe described in the post didn't work, but deleting a corrupted windows journal file did, and the diary of events and fax services would begin again.

    I thought that my problem was resolved, but the fax service is still broken.

    Trying to set up the server to receive faxes with Windows Fax and Scan, once more, as he had done very well before, I came across another error. What the first implementation account fax by following the Wizard launched by selecting "new fax" for the first time, or through the tools-> accounts-> options for adding fax, the mistakes of the wizard with this message: "there was an error in setting up the account. Please contact your administrator. " After reviewing several other forums (this issue has been much more difficult to find information on then the first described error), this solution seemed to be what has pointed out several positions:

    http://www.Vistaheads.com/forums/Microsoft-public-Windows-Vista-print-fax-scan/50649-fax-account-Wizard-error-2.html

    This solution involves deleting the registry keys for accounts via regedit. I tried this, and it did not work.

    It doesn't seem to be that much more that I can do. I was ready to try a restore of the system on the server, but apparently there were not a restoration of recorded images, even if this isn't an option.

    Are there any other fixes documented for this?

    Hi JaredGohr,

    I suggest you to send your requests in the link for better support below.

    http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

    I hope this helps.

  • Windows Fax and Scan "Sender Name" empty (Windows Server 2008 Standard)

    Hi all

    I am using Windows Server 2008 Standard (32-bit) with a RocketModem III card.  I have the latest drivers for the RocketModem.

    Using Windows Fax and Scan, I can send and receive faxes fine.  The only problem is when I see the fax, the name of the sender is blank.  I am trying to display the telephone number that someone sends me the fax to.

    I had thought it might also be under CSID, but everything I have complete options because it puts there.  I guess that means I want the CSID show for all those who sent faxes to me.

    It might be worth noting that I have active CallerID and you have a real fax machine that shows the incoming number very well.

    Does anyone have an idea where I could go wrong here?  Thanks in advance for the help!

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • NFS server crashes in Windows Server 2008 Std Edition

    Hello

    My problems together: -.

    1 NFS Client - Linux... Get in Windows Server 2008 Std Edition NFS server.
    2 NFS Client and Server services failed to restart.
    3 NFS Server crashes regularly and following several times to restart, windows all invited a blue screen with the message '' nfssvr.sys - address FFFFFA6006884051 base at FFFFFA600680C000. DateStamp A9939833 ".
    My question is:-
    1. is there a limitation of Windows Server 2008 Std Edition especially on the concurrent sessions of the NFS server?
    2. what could be the root cause of following services crash?
    3 NFS generates newspapers such as Windows Event Viewer system logs, etc.?
    Any feedback or help is much appreciated, because this issue is disturbing my entire web applications that take the source from the storage server.
    Thank you.
    Kind regards
    Wai Keong

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the TechNet forum. Check out the following link.
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Foundation of windows server 2008 comes with the fax server role?

    Foundation of windows server 2008 comes with the fax server role?

    Hello

    I suggest you to send your request from the link and check.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • Error 0xc00000e9 on Windows Server 2008 std

    I have a Dell Poweredge R410 which works well for over 3 years now and has Windows Server 2008 std 64 bit.

    At Christmas, let him download and install updates.

    But going back, I found it displayed error '0xc00000e9' and ' boot manager is missing or damaged.

    I tried to repair by original DVD disc but I can't find the installation of windows 'fix' and on that list, empty it.

    If I try to boot with the disc of Windows 7 Pro, I can see the existing installation of windows.

    How can I fix this server?

    I can not format because of the payload inside.

    Any help?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Windows Server 2008 R2 Enterprise Edition x 64 + SQL Server 2008 STD SP1 on paravirtualized VMDK = crashes?

    Hi all

    So far, I have a problemin of deployment with SQL Server 2008 STD SP1 Windows Server 2008 R2 Enterprise x 64 installed on Paravirtualized VMDK for best performance.

    but when I run SQL Server Mgmt. Studio to browse the database inside the paravirtualized disk blocks can always 100%?

    I'm also unable to perform a backup of this virtual machine using VCB:

    Creating snapshot of the Virtual Machine

    * Cannot

    create a suspended because the create snapshot snapshot operation

    timed for the outfit out of e/s in virtual jelly

    machine *.

    No chance in this guys case?

    Kind regards

    AWT

    My Installation of SP1 SQL 2008 hangs on the audit of the rule on a Windows Server 2008 R2 on vSphere ESX 4.1. So, I changed my SCSI controllers type of ' paravirtual' LSI SAS parallel, then it works fine.»

  • Issue of license; need information on the purchase of Windows Server 2008 R2 with 25 CAL

    I am looking to buy Windows Server 2008 R2 with 25 CAL.  The question I ask myself, is that if I were to continue this RDS would come with the initial 25 CAL or it would cost more.  If so, how much per RDS? and how much would cost the package for the Windows Server 2008 R2 with 25 RDS CAL company.

    Thanks in advance

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Performance issues with Windows Server 2008 host

    Hi all

    If I use a Windows Server 2008 host on my ESXi 4 installation.  I've recently upgraded to version 4 and had previously experienced similar problems and 3.5.  I also improved the hardware in the virtual computer to version 7 on all my guest OS.  The host in question is a file server.  Essentially what happens is sometimes that if a user opens a document (for most of the audio and/or video documents), the media file will take a minute or two to load then jump during playback.  If it's something like a file PDF/Word/Excel, the respective program crashes when the file loads or changes are saved, taking about a minute to respond to the user to enter again.  This problem is also very sparadic.  I even had this problem occurs when I'm the only user accessing the file server.  The specification of my VMware host is 3.2 GHz Xeon dual processor and 7 GB of RAM.  Two data warehouses are hosted on internal SATA hard drives.  ESXi is on the build 219382.  VMware tools is installed and update on all guest OS so far.  With regard to the use of the resources on the computer host, the memory usage with all my virtual machines running is almost always around 5.2 GB on the 7 available and the CPU usage is usually around 2 GHz.

    Looking at the logs performance monitor, I noticed an increase in the use of the disc during the shutdowns.  Are there utilities built to test the internal hard drives to find errors?  If this isn't the case, anyone recommend a utility that I can use to do this?

    Other ideas are also welcome.

    As mentioned disk SATA performance is less than ideal, or even acceptable by many people. The SATA drives in a configuration having non-RAID which makes it doubly Yes. If they were at least in a RAID 0, 0 + 1 or 5 configuration you would have best performance among readers (would be loath to 0 though, since there is no parity involved).

    Using the means on board mode SATA drive controller (or not RAID) of the SATA it runs the performance as low as possible.

    I wouldn't have even thought to have a server, or a system, used as a server that does not use RAID functions at least for redundancy. Couple that with discs that aren't going to cause bottlenecks as a standard too. Who used to refer to SCSI drives high speed, but also means using SAS drives these days (since they are replacing older parallel SCSI drives). The most difficult configurations for ESX, are performed on the server class hardware, which has access to a shared storage (which is high performance) on a fast network (Go to our days, or fiber) or a RAID array internally, which will not cause performance problems.

    You can try setting the server configuration, you have now, but that will only take you so far. You will need to the major weak links in the system. A (a major) is the SATA storage as stand-alone drives. The other is a network of 100 MB, which isn't too bad, but is still a performance hit when you share all traffic with these two ports. Moving to a GB switch could help the part of the question, but you will still have to solve problems of disk performance. If there is a decent amount of shared storage attached network where you are, see if they can give you a reasonable amount for the servers you are running on the host computer. Of course, you'll want to also be on the fastest possible network/connection of this storage.

  • Installation of Windows Server 2008 issues

    Hello

    This is my environment:

    Machine: HP DC5800 with image Intel CPU at 2.5 GHz and 8 GB of RAM

    SE host: Windows Server 2008 Ent 64 bit (Version 6.0, Build 6001, SP1)

    VMware Server 2.0.1 (Build 156745)

    I try to install Windows server 2008 both standard and R2, but I still get the error message attached when you start the virtual machine

    Note: I tried already providing the operating system in ISO format and using direct DVD drive so

    Concerning

    Hello

    You have activated VT settings in the BIOS of your host? If this isn't the case, you must do.

    You must enable "trusted execution" (if it is present in your BIOS).

    You have to cold reboot after that.

    J.

    According to the details of CPU you gave-, I think you have Q9300.

    If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

    Post edited by: janlib

  • IIS on Windows Server 2008 SP2 Manager error

    We would like to ask for your support on an issue that we have encountered on IIS 7.0.

    Our application is running on a Windows Server 2008 SP2 64-bit computer and uses ASP.NET 1.1.
    We intend to change the account used for anonymous authentication through the IIS Manager.

    However, we have encountered this error when you open the feature of authentication in IIS.

    ---------------------------
    Authentication
    ---------------------------
    There was an error during the execution of this operation. Details:

    Filename: \\?\C:\Windows\system32\inetsrv\config\applicationHost.configError:

    Same error also occurs when you view other features of IIS.
    Hope you could give us some ideas on how to solve this problem.

    This issue is beyond the scope of this site and must be placed on Technet or MSDN
  • Problems with the files of FoxPro 2.6 in Windows Server 2008.

    Dear Manager:

    We have some files of FoXPro 2.6 for example "AddUser.DBF" file that can be read in Windows 2000 Server or Windows Server 2003 by a "Microsoft Visual FoxPro OLE DB provider", it can read the file "AddUser.DBF" by our ASP.NET 1.1 (Visual Stodio 2003) web application, no problem.

    We have been using MS Windows Server 2008 R2 now.  But when we installed "Microsoft Visual FoxPro OLE DB provider", he cannot read the file "AddUser.DBF" by our web application ASP.NET 1.1 (Visual Stodio 2003) on the MS Windows 2008 R2 environment.

    Do you have a solution to this issue?  You have another type of Microsoft Visual FoxPro OLE DB Provider for Windows 2008 R2 help?  Then it can read FoxPro example "AddUser.DBF" file?

    When you get a chance, please answer my question.

    JiXing (Peter) Wang | Database administrator, TetraTech AMT
    Direct line: 703-841-2239 | Main: 703-841-2684
    Fax: 703-465-9158
    E-mail address is removed from the privacy *.

    Hello PeterWang,

    You can find the Server forums on TechNet support, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

Maybe you are looking for

  • Satellite P305 - Bluetooth does not work

    I am new to Bluetooth and I have a new Toshiba Satellite P-305. It did not come with Bluetooth. So I bought a dongle (actually 2) and they both install the drivers via BlueSoleil.Then I find that I need an another Version of BlueSoleil for my 64-bit

  • WAP300N: Wireless clients are isolated from my local network?

    WAP300N is an AP, but how can we separate wireless clients who come from the WAP300 on my local network? o option NAT or IP isolation?

  • T500 fingerprint reader does not load at startup (blue screen)

    I have 2081CTO T500. Provided natively with Vista Home, but I reinstalled with XP Pro SP3. All the latest updates are installed both drivers and windows (as of March 12, 2010). I've had this laptop for about a year and the fingerprint reader to work

  • Windows 7 suddenly pauses / freezes constantly

    I had a memory card should be formatted before continued use..., I got a lot of important things on it so I had to install a software on my pc to get the info because I'm backup the info out of the card, half feel, although the transfer has decreased

  • Warp limit in Lightoom CC (subscription) is missing.

    Hi allI just agreed with the Lightroom and Photoshop CC and finished installing, but limit warp in Lightroom is missing. I know that you don't get with the version without subscription, but I subscribed!I tried to uninstall and re - download, updates