FB4.5 iOS package configuration to use AIR 2.7

Similar Questions

• Non - embedding fonts using AIR in Flash Professional 3.0 (for iOS Development)

  Hey there,

  We develop Plains AS3 projects (to compile) using Flash Professional and Flash Builder.

  Everything works well with the new 3.0 version of the AIR and performance is better than with AIR 2.6

  I followed this tutorial and similar use AIR instead of AIR 2.6 3.0:

  http://kb2.Adobe.com/CPS/908/cpsid_90810.html

  Unfortunately, today, we have seen a new show with embedding fonts. Using Flash Professional, himself or the Embed tag in the code itself works. We also see that the SWF size does not change when you add more than one font.

  Anyone has an idea where this problem may be caused? I think that how the fonts are embedded changed air 3.0 and it does not work with the 'replace AIR 2.6 with AIR X.Y thing'.

  Any help welcome.

  Best,

  Cedric

  Try the instructions at http://help.adobe.com/en_US/as3/iphone/WS789ea67d3e73a8b2-5b45bb17124b3295cc8-7ffd.html.

• iOS Simulator on OSX with AIR SDK 20

  I use AIR SDK version 20.0.0.233 by Download Adobe AIR SDK.

  If you try to compile empty iOS Simulator Adobe CC 2015 mistakenly app:

  

  In IntelliJ IDEA:

  

  Hi, can you please check with the last beta SDK? It can be downloaded from the link below please use Xcode 7.2 Simulator for the same.

  Download Adobe AIR 21 Beta - Adobe Labs

  -Roshan

• Can I use any file .swf on iphone using AIR SDK 2.6?

  Hello

  Can I do any file executable .swf on iphone/ipad using AIR SDK 2.6? If so, how?

  If it isn't then why? And if I can't run each file .swf on apple devices can

  What type of .swf file, I can run on these devices?

  Thank you

  Judey

  Hello Alyson.

  I tried with the SWF file to the media spotlight. My conclusions.

  It works, but it continues to display the blackheads animation loading.

  It doesn't show a helloworld animation because the ActionScript in the SWF file tries to load RSL that is not supported on iOS.

  Hope that answers your question.

  Georges R. White

  IOS of the AIR

• I have reset firefox because of the slow, now it says firefox is configured to use a proxy server refusing connections, what a waste! r

  I am using windows 7 Home premium. Button Firefox connected if slow to get on the internet, so I used the reset button. Now, firefox is configured to use the proxy server refusing connections, unreal... I hope you can help soon... Thank you, Donna

  you are the very welcome!

  It should be possible to select what happens when you click on an e-mail link in the applications Panel in the firefox options. For more information, see change the program used to open e-mail links

• I do not use a proxy server to connect to internet, but Firefox is automatically configured to use the loopback address.

  I have a direct connection to the internet and that you do not use a proxy server. Every few weeks, Firefox will automatically reset itself to be configured to use a proxy to the loopback address (127.0.0.1). Manually change to 'No proxy' works, but I have to do so every time I open the browser or even a new tab. The only solution I can find is to create a new profile that gives me a new, clean install of FF, but then I lose all my Add-ons. This has happened several times now and it's extremely frustrating. I have scanned for malware, but have not found any problems.

  Hello rjlasser, first of all please make sure that none of your extensions is the origin of the problem (some circumvention of censorship of youtube addons do also use proxies for example).

  Otherwise please see How to fix the preferences that will not save for common solutions.

• On the screen that it says "the proxy server refuses connections" Firefox is configured to use a proxy server refusing connections. The result is no internet.

  the proxy server refuses connections"Firefox is configured to use a proxy server refusing connections. The result is no internet

  You are welcome

• How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  How is Samsung TV, possible to permanently hide the message that explains how to use Air play via Apple TV?

  Apple Tv has the conference room mode turned on causing the message to appear.  Turn it off:

  On restrictions of airtime and the mode of the conference room on your Apple TV - Apple Support

• I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

  I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

  Windows: Tools > Options > advanced > network > settings
  OSX: Firefox > Preferences > advanced > network > settings
  Linux: edition > Preferences > advanced > network > settings
  Set your settings to connect to the 'No proxy', if you are not using a proxy.

  Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

• Hi, I just bought the Dm11 rhythms... How can I configure for use in Garageband?

  Hi, I just bought Dm11 drum machine apple app, how do I configure for use in Garageband?

  I guess you mean the Mac Version of DM1. The App is not closely integrated with GarageBand. Therefore, you must export each loop/beat you like WAV or AAC and import it in GarageBand.

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time.

  After you have reinstalled my Window 7 Professional is not activate with the product key, I received with my package & which I used for a long time. I tried to activate using automated phone system, but could not do. What is the solution. I know that this product key I used only on my current desktop & in past I had not faced any problem on reappattage. This time, I had deleted all the parks & reformatted all readers of my Win7 teacher reappattage. This can be a cause of failure of activation?

  Direct activation number: (888) 725-1047

  1-800-936-5700

• ID package already in use, an error has occurred during the recording of output ' 1.1.0"to the database.

  Hello

  I currently have an application called "Apa Doanya' (id 33020976) for BB 7 and below. Now, I created another version of it for BB10. To publish this version BB10, I created a new application named also "Apa Doanya' (id 46317888), download the file bar, but not yet to introduce the new application for review. Later, I changed my mind, I want to release this BB10 version under the name of my current application so that I can keep the sides and the current download figures. So in my application, I added a new version, download the folder bar and increment the version 1.1.0. But I got an error when recording on step 5, he said:

  Package already in use ID
  An error has occurred during the recording of output ' 1.1.0"to the database.

  I tried several times but no luck. What has caused this? Is - it because I already download the bar file to another application (id 46317888)? Just to be sure, I remove bar app 46317888 file and download a dummy cod file (so that the application can be saved). Then repeat the previous step (add a new version and so on) but I still have the same error.

  Really appreciate any help.

  -Hammemi - D

  Hi erik,
  Thanks for reminding me

  Yes, the problem is now RESOLVED. It was, I think, a bug/error on their part (support of the seller) so they erased the package id (I quote: "the package ID has been deleted.").

  Thank you very much :-)

• SSL configured to use 3DES but newspapers show that des is negotiated

  The ASA is configured to use the following encryption protocols:

  SSL encryption aes256-dhe-aes256-sha1 sha1, 3des-sha1

  But newspapers show the ASA announcement OF and negotiates finally on with the customer. The SAA is showing a bug and really negotiate IN the newspapers are incorrect and should show 3DES. Has anyone else seen elsewhere? Thank you

  <150>: 24 July 16:48:43 CDT: % ASA-ssl-6-725007: end of the SSL session with client outside:172.17.9.54/61805.

  <151>: Jul 24 16:48:43 CDT: % ASA-sys-7-711001: webvpn_session.c:http_webvpn_find_session [175]

  <151>: Jul 24 16:48:43 CDT: % ASA-sys-7-711001: webvpn_session.c:webvpn_update_idle_time [1728]

  <150>: 24 July 16:48:43 CDT: % ASA-ssl-6-725001: handshake SSL with client outside:172.17.9.54/61856 for TLSv1 session.

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725010: device supports the following 3 cipher (s).

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [1] encryption: DES-CBC3-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [2] encryption: AES256-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [3] encryption: DHE-RSA-AES256-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725008: outside:172.17.9.54/61856 client SSL offers the 5 cipher (s) following.

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [1] encryption: AES256-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [2] encryption: AES128-SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [3] encryption: DES-CBC3-SHA

  <151>: 24 July 16:48:43 CDT: ASA-ssl-7-725011%: [4] encryption: RC4 - SHA

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725011: [5] encryption: RC4 - MD5

  <151>: 24 July 16:48:43 CDT: % ASA-ssl-7-725012: device chooses cipher: DES-CBC3-SHA for the SSL session with client outside:172.17.9.54/61856

  <150>: 24 July 16:48:43 CDT: % ASA-ssl-6-725002: aircraft completed the SSL negotiation with customer outside:172.17.9.54/61856

  Everything's fine, DES-CBC3 is 3DES.

  And additional improvements, reorganize the encryption algorithms are the most desired at the beginning. In addition, you can remove 3DES if there is no more XP-customer.

• BlackBerry smartphone how to configure and use e-mail without BES

  Hello

  I'm trying to figure How to configure and use e-mail without using a BES.

  I checked with the local telephone company. And the number is not ascociated with any service of BES.

  The entry of services show no indication in this sense.

  In addition, the configuration of SIM card show that everything is disabled. This means that the phone is unlocked. At least that is my understanding.

  However, even after a wipe, the BB device does not set up an e-mail account, as described in the manual. He keeps asking for a BES activation first.

  What will do that disappears?

  And to allow the configuration of the "spam"?

  Just develop the right answer given by JSanders, you can always access your email accounts and social networks (facebook, twitter, google +, etc) on your phone, you will just have no notifications PUSHED to your phone.  You can access the internet on your phone in order to access these accounts, but it should go to them.  With BlackBerry Internet Service activated on your phone account, RIM will push these notifications of new emails, facebook messages, new tweets etc. for your phone.  That's what you'll be missing out on without active BIS.

  I wanted to just make sure that there is no likelihood of confusion.