FDMEE VB API introduces not and gives "error of data access.

Similar Questions

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• Every time I open photoshop, my computer hangs and gives error KERNEL_SECURITY_CHECK_FAILURE

  So if you read the title of this discussion, you will know what it is. Whenever I run the Photoshop application, my computer hangs and gives error KERNEL_SECURITY_CHECK_FAILURE.

  I've already tried everything that I saw made online on other posts, but they do not seem to work.

  If someone could help me with this problem as soon as possible, it would be great.

  Thank you!

  Hi jollylilwoodsman,

  In my opinion, you are using an Nvidia graphics card.

  This questions seems to appear only after the recent update of the graphics card from Nvidia.

  • Navigate to the location - C:\Program Files\Adobe\Adobe Photoshop CC 2015, search the file named sniffer.exe and place it on the desktop.
  • Launch of Photoshop now and it should work fine.

  Note - moving sniffer on desktop, Photoshop will not use your graphics card.

  Another solution would be to install a previous version of the graphics driver.

  Let me know if it helps.

  ~ UL

• Why did the last updated do not and give me U44M1P7 this_?

  See above. Why did the last updated do not and give me U44M1P7 this_?

  Hi cfosofart,

  Please go follow the mentioned kb: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html .

  Kind regards

  Romit Sinha

• I keep getting invited to windows update (vista): security for PowerPoint Viewer 2003 (KB969615) update installs not and displays "error code 4397."

  Security for PowerPoint Viewer 2003 (KB969615) update installs not and displays "error code 4397."

  Please help with installation. After a short period of time, I get a message that there is a problem and it will stop

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• I can't install any adobe application. I bought all these products and tried to d/l through the creative cloud and direct links, by DDLS trial or normal he gets 2%, then rises to 99% and gives error DW050 and WARNING DS013...  Very frustrated

  I bought all these products and tried to d/l through the creative cloud and direct links, by DDLS trial or normal he gets 2%, then rises to 99% and gives error DW050 and WARNING DS013...  Very frustrating because I've already paid for them. Is a 2nd hand computer, but I erased everything when I bought it.

  Working on a mac osx, report looks like this

  Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DS013 ... -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 30 error(s), 2 warning(s) WARNING: DS013: Payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0 is already installed and the session payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0 has no upgrade/conflict relationship with it. WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1 ERROR: DW050: The following payload errors were found during install: ERROR: DW050: - Dynamic Link Media Server: Install failed ERROR: DW050: - Adobe Encore CS6_AdobeEncore6en_USLanguagePack: Install failed ERROR: DW050: - Adobe XMP Panels: Install failed ERROR: DW050: - Adobe Player for Embedding 3.3: Install failed ERROR: DW050: - Required Common Fonts Installation: Install failed ERROR: DW050: - Adobe CSXS Infrastructure CS6: Install failed ERROR: DW050: - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure ERROR: DW050: - Adobe Encore CS6: Failed due to Language Pack installation failure ERROR: DW050: - Adobe Utilities CS6: Install failed ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed ERROR: DW050: - Adobe ExtendScript Toolkit CS6: Install failed ERROR: DW050: - Camera Profiles Installer: Install failed ERROR: DW050: - AdobePDFL CS6: Install failed ERROR: DW050: - Adobe Extension Manager CS6: Install failed ERROR: DW050: - Adobe Bridge CS6: Install failed ERROR: DW050: - AdobeTypeSupport CS6: Install failed ERROR: DW050: - AdobeHelp: Install failed ERROR: DW050: - Adobe Premiere Pro CS6 Family: Install failed ERROR: DW050: - Adobe Mini Bridge CS6: Install failed ERROR: DW050: - Suite Shared Configuration CS6: Install failed ERROR: DW050: - AmericanEnglishSpeechAnalysisModels: Install failed ERROR: DW050: - Adobe Media Encoder CS6: Install failed ERROR: DW050: - Adobe Premiere Pro CS6 Support: Install failed ERROR: DW050: - Photoshop Camera Raw 7: Install failed ERROR: DW050: - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed ERROR: DW050: - Adobe Encore CS6 Support: Install failed ERROR: DW050: - Recommended Common Fonts Installation: Install failed ERROR: DW050: - DynamiclinkSupport: Install failed ERROR: DW050: - AdobeCMaps CS6: Install failed ERROR: DW050: - Adobe CSXS Extensions CS6: Install failed ------------------------------------------------------------------------------------- 
  Now as stated I have tried several different download methods, removed all firewalls & antivirus. Any Suggestions???
  

  The system configuration required

  Exit Code: 7 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DS013 ...  -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 30 error(s), 2 warning(s)  WARNING: DS013: Payload {56DCC6F4-322E-42DA-A5DA-26BAD28C1E10} Camera Profiles Installer 8.0.0.0 is already installed and the session payload {539AEF15-3A2B-4A31-A587-7E90F7D9C700} Camera Profiles Installer 7.0.0.0 has no upgrade/conflict relationship with it. WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1  ERROR: DW050: The following payload errors were found during install: ERROR: DW050:  - Dynamic Link Media Server: Install failed ERROR: DW050:  - Adobe Encore CS6_AdobeEncore6en_USLanguagePack: Install failed ERROR: DW050:  - Adobe XMP Panels: Install failed ERROR: DW050:  - Adobe Player for Embedding 3.3: Install failed ERROR: DW050:  - Required Common Fonts Installation: Install failed ERROR: DW050:  - Adobe CSXS Infrastructure CS6: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure ERROR: DW050:  - Adobe Encore CS6: Failed due to Language Pack installation failure ERROR: DW050:  - Adobe Utilities CS6: Install failed ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed ERROR: DW050:  - Adobe ExtendScript Toolkit CS6: Install failed ERROR: DW050:  - Camera Profiles Installer: Install failed ERROR: DW050:  - AdobePDFL CS6: Install failed ERROR: DW050:  - Adobe Extension Manager CS6: Install failed ERROR: DW050:  - Adobe Bridge CS6: Install failed ERROR: DW050:  - AdobeTypeSupport CS6: Install failed ERROR: DW050:  - AdobeHelp: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6 Family: Install failed ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed ERROR: DW050:  - Suite Shared Configuration CS6: Install failed ERROR: DW050:  - AmericanEnglishSpeechAnalysisModels: Install failed ERROR: DW050:  - Adobe Media Encoder CS6: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6 Support: Install failed ERROR: DW050:  - Photoshop Camera Raw 7: Install failed ERROR: DW050:  - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed ERROR: DW050:  - Adobe Encore CS6 Support: Install failed ERROR: DW050:  - Recommended Common Fonts Installation: Install failed ERROR: DW050:  - DynamiclinkSupport: Install failed ERROR: DW050:  - AdobeCMaps CS6: Install failed ERROR: DW050:  - Adobe CSXS Extensions CS6: Install failed -------------------------------------------------------------------------------------
  

  The system configuration required

• Hello! I am trying to install Photoshop and gives error 1 help me please!

  Hello! I am trying to install Photoshop and gives error 1

  Help me please!

  Hello

  Please see the instructions at the link below:

  Error: "unable to install". Creative cloud office

  Error code: 1

  Let us know if that helps.

  Kind regards

  Bani

• Cc of Photoshop download just guard dropping and gives error error A12E5

  Just Photoshop download keeps breaking and give error A12E5

  http://forums.Adobe.com/thread/1087843

• Vista Windows update fails to install and gives error code A 80071, 30

  Windows Update for vista not install and give the error code A 80071, 30. How do I receive the updates installed and what is this error? Stem

  Original title: windows update error code a 80071, 30

  Hello

  Method 1:

  I suggest you to disable all security software, including the Windows Firewall and then check if it solves the problem.

  Check out the link to disable the security software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

• After upgrading RAM, computer stops and gives error when restarting: "DISK BOOT FAILURE, INSERT SYSTEM DISK".

  Original title : OFFICE XP STOPS (MESSAGE of ERROR)

  I get the message "DISK BOOT FAILURE, INSERT SYSTEM DISK". I just added more memory to my 512 RAM. I USED MY XP TO REBOOT DISC, BUT THERE ARE ALWAYS AFTER PRESSING THE KEY 'R '. ONCE IT STARTS AND SE PAST JUST STOPS AND THE ERROR MESSAGE IS POSTER AGAIN UPWARD. I HAVE THE SAME 'MSCONFIGED' IT NORMAL TO SELECTIVE. I WAS ABLE TO GET INTO SAFE MODE, BUT NOW IT WON'T. I GET JUST THE ERROR MESSAGE.       > WHAT AM I DOING WRONG

  Hello

  You can view these methods:

  Method 1: As a first step, check to see if the hard disk becomes detected or listed in the Basic Input/Output system (BIOS). Also, be sure to change the boot order in the CMOS settings so that thehard drive is the first on the list.

  Note: To learn how, see the documentation provided with your computer or contact the manufacturer of your computer.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Method 2: If the manufacturer has installed the Recovery Console on your computer, perform the check disk to fix this.

  At the recovery console command line, type:

  Chkdsk /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information, see:

  How to perform disk error checking in Windows XP

  Chkdsk

• WdiServiceHost does not get the error code 5 access denied

  Diagnostic Service Host System (WdiServceHost) has been unable to restart when you try to restart maintain error code 5 access denied. How to restart the Service

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Some services do not start in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/943996

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Local calling XML gives Error #1009: cannot access a null object

  Kind of perplexed as to what is happening...

  Calling a function "loadDownloads" which prepares to load a local file "downloads.xml" (located in the CBC even as the application mxml file); This XML file is very simple, containing a root 'downloads' with several 'download' elements it contains (each is a brief description and the url)

  I put my compiler settings for - use-network = 'false' to be able to load local XML file, and I use a HTTPService.send () to raise the load.  My HTTPService is defined as follows:

  <mx: HTTPService id="httpService" resultFormat="e4x" 
   fault="httpService_fault(event)" result="httpService_result(event)" />
  

  I put the default event handler until, in case of default, an alert indicates the error information; the result handler simply does the following:

  private function httpService_result(evt:ResultEvent):void {
       xmlContent = XML(evt.result);}
  

  Yes, all variables have been previously declared and typed.  This throws any errors (he did at the beginning, when I was incorrect for the URL file names and when I had the malformed XML instructions, so I know that Manager error works) to access the XML file

  However, when I try to access the nodes or elements in the XML document, I get this runtime Error #1009: cannot access method or property object, null, and of course, xmlContent shows as null.  Here's how I'm trying to access:

  for each (xmlDownload in xmlContent.downloads) {
       // do stuff here like...
       linkLabel.text = [email protected]();
  }
  

  All all all ideas why HTTPService is to see the XML file and says it's OK, but does not seem to extract the XML file in the xmlContent:XML object?

  Three service objects would be better.

  Also remember that you can not call a fair request after the other because you can have only active requires both.

  You must call each new request out of the resultHandler of demand of ends.

• My Vista computer will not be stopped, randomly freezes and gives error Logon process has failed to create the security options dialog

  I have a laptop that has recently (in the last month) developed several questions. These issues are: computer does not, get the logon error message failed to create the dialog box options security when I hit Ctrl alt delete, computer hangs when more then another program is open. How can I solve them? My system is Vista Home premium 32 bit any help is appreciated.

  * original title - several issues need help *.

  Hello

  I forgot to include which could help with the connection of safety problem:

  How to restore the security settings to a known working state?
  (For Vista and XP)
  http://support.Microsoft.com/kb/313222

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Epson Artisan 700 printer does not print and gives errors in Windows 7

  I HAVE AN EPSON ARTISAN 700 PRINTER AND IT STOP PRINTING AND ALL THE LIGHTS FLASH AND I GET AN ERROR MESSAGE INDICATING THAT AN ERROR HAS OCCURRED WITH THE PRODUCT.

  * original title - WHY IS ALL LIGHT ARE FLASHING AND the PRINTER WANT PRINT.*

  Hello

  · Did you receive the exact error message?

  · You receive an error with the error code?

  · Do you remember all the recent changes on the computer before the show?

  · You try to print from the internet explore?

  You can run the patch from the link below: why can I not print? : http://windows.microsoft.com/en-US/windows7/Why-cant-I-print

  Alternatively, you can follow the procedure on the manufacturer's Web site. Link for reference: http://er.epson.com:8001 / early

• Windows 7 does not start. gives error 305 on hd on my pavilion dv7

  In a year that cell phone starting acting funny. Sometimes would not start and stop at different times. I now can not able to boot at all. It gives me an error not design start-up, and then disk is full ect. My wife had this for 10 monthss when it came to the top. We took it to the Geek squad in our region, and says, nothing was wrong with her. Now, he is more under warranty and went south.

  Hello:

  Please see this related thread at the link below. I would say that the hard drive conked and must be replaced and the operating system reinstalled.

  http://h30434.www3.HP.com/T5/notebook-hardware-e-g-Windows-8/hard-drive-message-305/TD-p/572461

  Paul