FDT deploy device Alph BBDev

Similar Questions

• Unable to deploy device applications examples

  I'm unable to deploy any of the samples from samples waterfall waterfall on my device. I get the following error when I try

  There is no program file
  /Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not found
  /Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not found
  /Users/jeswinsimon/projects/bucktlist/sampleApps/starshipsettings/arm/o.Le-v7-g/starshipsettings not found

  Feature: Dev Alpha B OS Version: 10.1.0.1720

  QNX Momentics® IDE for BlackBerry® 10 native SDK

  Version: 10.2.0

  Build id: v201306031341

  You probably imported the project.  I just checked myself and starshipsettings working on my bbndk Dev Alpha C. last 10.2.

  File-> import-> General-> existing projects into workspace and you need to select the directory or the zip file.

  After that I just checked the build configuration - debugging the device, he built and ran it on the device.

  If you still have questions download the example directly from github: https://github.com/blackberry/Cascades-Samples - maybe you have the old version.

• Deployment device 42xx Cisco IDS network taps

  Hi all

  Someone at - he experiences of deployment of IDS 42xx (4235 and 4215) appliances with network taps (e.g. Finisar UTP IT Tap/1)? I have several of the device IDS deployed a few months back using the taps of Finisar, and thought that it worked fine, until I discovered that I have am capture only one side of the circulation, due to the nature of the taps! It seems that I need to put in another card network on the device IDS (a Cisco 4235), but is - it possible? Is there a way I can turn the power of 4235 on channel binding or Etherchannel?

  The last option, I think if the ideas above are not possible is to put in another switch and reflect the two ports from the tap water, but that doesn't look good for the final cost...

  Suggestions are most welcomed!

  Thank you

  Kian Wei

  Monitoring network taps with a Cisco IDS device is not officially supported by Cisco.

  That said, howewever, several customers have successfully deployed with taps.

  Faucets, as you've seen have 2 outputs.

  If tap is placed on the connection between computers A and B, one of the outputs will be for traffic from A to B, and the other will be for traffic from B to A.

  To analyze the tap water, the sensor will need to see the two outputs.

  You could do this by connecting the taps to a switch and then extending over 2 ports to the IDS sensor monitoring port.

  Or you may be able to use a second interface on the sensor itself.

  The IDS-4235 4250 IDS and IDS-4215 are able to be upgraded with a 4 ports 10/100 card, for a total of 5 ports to sniff.

  If the connection you type is a 10Mb or 100 MB connection, then purchase 4 port 10/100 for the sensor and the 2 tap on 2 of the ports of the NETWORK adapter card.

  NOTE: The sensor combine incoming packets on all interfaces and treat them as if they are part of the same network.

  You just need to place all interfaces in 'Group 0' and select 'non-stop' each sniffing interface.

  Here is the part number for the 4 ports 10/100 cards:

  ID-4FE-INT =

  Refer to the installation guide for more information on how to install the card and to configure the sensor:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids10/hwguide/index.htm

  Now if you type is a 1 Gig copper or fiber optic connection then you will need to buy a switch to combine 2 outputs from the taps and extend towards the sensor sniffing port.

  Cisco currently offers no additional copper Gig cards.

  Cisco offers a map of fiber unique Gig for the IDS 4250 SX port but can't stand not place these cards in the sensor 2.

  Cisco also offers a dual port fiber Gig, known as the XL card. The XL card has hardware acceleration for the monitoring of the faster speeds. However, the XL card does not currently work with taps.

  So if followed by a 10/100 connection then try the 4 ports 10/100 card, but if touching a Gig connection, then you will need a switch to aggregate outputs 2.

  What some users have also done is to use the switch and do not worry with the faucet.

  They connect computer A to machine B to the switch and the switch. Then cover the traffic to the port of the sensor.

• Consumption of CPU resources with several EtherCAT devices

  I use a cRIO 9074 as EtherCAT master and see extremely high CPU usage with only a handful of the deployed devices, nevertheless does not apparently works task from the CPU.

  Installation: I use a simple loop of 100 Hz timed synchronized with the analytical engine that prints a message to the debug console each cycle and samples once CPU usage every 100 cycles. That I added several discs (3rd party engine Copley), I see the CPU load increase as follows:

  Disks / use of the CPU

  0 / 43%

  1 / 67%

  2 / 74%

  3 / 81%

  4 / 89%

  5 / 95%

  6 / 99%

  7 / 100%

  Keeping in mind that I'm not perform a different operation, including the AOP/SDO reads/writes, I would expect much better performance. Reportedly, EtherCAT is able to communicate with dozens of devices at rates of up to 1 khz. Is this a limitation of the controller I use, or I need to run another action for the consumption of resources under control?

  Thank you

  Patrick

  I have discovered a solution to this problem.

  I used digital I/O blocks of read/write, but is not connected to the terminals of the error. When I connected to the terminals of all serial error I see a massive reduction of the CPU and can reach loop rates of > 500 Hz... He also seems to have helped that I removed the foreign software modules which lowers the consumption of resources of reference on the cRIO.

• DLL does not not on the deployed computers

  Greetings;

  I'm working on a VI to run a night vision camera.

  My PC is win 7 and I'm under LabVIEW 2014.

  My machine deployment is a tablet of Microsoft Surface on 10 to win.

  The camera driver software is Pleora 4.0.3.3049, I'm also using some functions IMAQ.

  The VI and the exe file I built work fine on the development Machine, the display is working and running between 30 and 60 frames per second at 1280 x 1024 color.  (many PC resources)

  I have a command of consloe window that also works on the development of PC.

  It is not run on the deployment device, (tablet of Microsoft Surface on 10 to win).

  My first numbers have been associated with the location of 3 .dll files.

  they are:

  NIVison.dll

  NIVisSvc.dll

  eBUS_C_SDK.dll - (this is the one of Pleora)

  The exe would question me for the location.  I solved this by adding them to the folder where the exe file was stored.  A temporary workaround solution.

  When the lance of the exe, I get a message of "Lack of external function" with the sub induvidual VI which calls a specific dll.  15 in all.

  The façade is as I expect, but I get the message above this one.

  I installed and re installed the drivers for the cam on the surface.

  I checked that the surface has the full version of RTÉ.

  Thanks in advance;

  Mike

  Thank you to:

  Paul and Ren of the service request line the problem is identified and corrected.

  Thank you both for your help today!

  I just had a major breakthrough, looking at the forum thread that Paul has pointed out to me I went to each call node function Lib changed to specify the path on the block diagram and added a constant application directory to each

• Response-to-end transaction time

  Hello team Foglight,

  Basically, we are trying to see if Foglight is able to recover total response (end to end), after that he went through the entire workflow.  I read the code here.  Let's say we installed all the cartridges, created the necessary agents and deployed devices EU so it would be awesome if someone can provide answers to the following.

  1. According to the code, there are 4 levels by default user-> Web-> App-> DB.  If the architecture of workflow contains temporary devices to perform another treatment as a program on a Unix host written in C++, JMS (MOM), TIBCO EMS, or another application that Foglight will not be able to monitor the application (except the OS metrics), it is always possible to determine the response time from end to end of a transaction?  So basically the flow would be like this:

  User-> Web-> App-> SOME SERVERS (e.g. C++, JMS, TIBCO) TEMP-> DB.

  And it is also possible to add temporary dependence devices discovered diagram showing how long the operation expected (or runtime) before he moved to the next layer?

  2 can anyone share a screenshot showing the complete levels (at least 4 by default) showing the distribution of time to answer through the Explorer.  The edoc here shows only the following, but the DB part does not show response time. I saw another diagram here but it shows aggregated, response times that I really need, it's a similar opinion to below.  We just need proof (screenshot) that Foglight can show response time of DB level for different applications.

  

  3. for the period of performance of DB level, how does it calculate it?  Let's say the transaction issues a SQL statement and we need to know how long this SQL statement ran.  Do we need to install an agent of the DB in order to determine that?  And if the agent is already installed, how does really know that this particular SQL statement corresponds indeed to this particular user transaction?

  4. If someone has a detailed presentation on the solution APM from end to end for Foglight, showing its capacity to retrieve the runtime on all levels so to calculate the total time of the to - end operation, that would be great.

  Thanks in advance.

  Kind regards

  Hollis

  Hi Hollis:

  You can always add your own custom levels so that they appear in your model of addiction. You can define your own groups of objects in the Services of-> groups of objects, and you can surface as levels (which may appear in your dependencies and the COS) using Services-> Tier definitions.

  Currently, the ability to determine the performance level depends on the presence of an Agent of Java Foglight on this layer (we will add the same capacity for our agent .NET later this year). The Java agent can determine the news of response time for any level on it's, or any stretch layer away from him. Java agent (and soon the .NET agent) all make the answer internal time calculation - they can both determine that a layer of database takes because they understand how Java and .NET make the backend calls to databases; It's that they can specifically time (for Java) JDBC calls or call ADO.NET (for .NET). At the moment only EUM appliance of Foglight (FxM) and Java agents are involved in the calculation of the end-to-end response time.

  I hope this helps.

  Robert Statsinger

• Cisco ACS 5.8 CLI admin account lockout

  Hi all

  We recently deployed device Cisco ACS 3495 and running on a version 5.8.

  Everything seems well while our for the CLI admin account was locked out.

  Found a bug in Cisco for the same problem with version 5.5, but no solution yet...

  ACS 5.5 CLI Admin account locked and no Log Message
  CSCur37203
  Someone out there who might have encountered the same issue and can help advise?
  Thank you and best regards,
  NDA

  Hello

  Unfortunately, the only solution for this is the DVD of password recovery.

  Once fixed, you can increase the car locked out amounted to something greater than the default value of Cisco.

• ISE nodes both become primary

  Hello

  We deploy devices ISE 2 x 3415 for a customer as a cluster of admin primary/secondary. We took the 1.2.0.899 - 5-93975 Version. Everything was going to plan for the deployment and when we manually promote the secondary everything worked fine. Then, we tried a few tests before going into production. We have simulated a failure of the switch port isolated into force our primary ISE. We have promoted our secondary ISE and so we had to then both as primary Admins of the ISE has solved the problem of the switch. At this point it would be good for simply "downgrade" back to secondary school, but this isn't an option. We tried to break the cluster to cancel registration of primary school education. Then, we walked into a situation where we could not completely break the cluster and the end result is that the secondary image shows an internal error 500 (see attachment) and we are unable to browse to the GUI. I think I need to recreate the secondary image now and re - join on the cluster.

  Is it whatever it is documented as to how to recover a situation when the two devices will be primary? Looks like it should be simple enough. Anyone also met the 500 internal error when you attempt to log into the device and if so, how you resolve. CLI all services are running.

  Any help/advice would be appreciated.

  Dean

  I have the same scenario as yours: ise1 Admin/MNT primary and ise2 secondary is Admin/MNT.  ise1 IP is 192.168.1.1/24 and ise2 192.168.1.2/24.  They are both on the same subnet.

  simulate a disaster: stop the switchport ise1 is connected to.

  1. manually promote ise to primary Admin/MNT.  After that, make a bunch of changes to ise2.

  2 bring back ise1.  At this point, the ise1 and the ise2 are indicated as the main administrator

  3 - from the Web UI in ise2, select ise, then press 'sync-up '.  That will force ise1 to become secondary Admin

  4 - once everything is Sync, connect to the ise1 Web interface and manually promote ise1 to become primary Admin/MNT.

  Who is?

• Cisco ACS 5.2 and IOS XR

  We deploy devices with IOS XR and I was wondering if anyone has experience their deployment with GANYMEDE authenticate on the Cisco ACS 5.x platform. If so, can you give some examples of how you have mapped the groups predefined by the user.

  Thank you

  Here's an example of how to do that crs to ensure share you the correct tasks under the profile of the shell.

  http://www.Cisco.com/en/us/docs/routers/CRS/software/crs_r4.1/Security/Configuration/Guide/syssec_cg41crs_chapter1.html

  http://www.Cisco.com/en/us/docs/routers/CRS/software/crs_r4.1/Security/Configuration/Guide/syssec_cg41crs_chapter1.html#con_1185183

  Thank you

  Tarik

• Windows domain account to view reports / manage the ACS server.

  All,

  We have a Cisco ACS 5.2 deployment (device).  It has existing integration with Active Directory.  We use it with RADIUS to authenticate our users wireless and GANYMEDE to manage our network equipment.

  RAY reports are useful for other teams (except my own) in order to resolve account lockouts and password (everyone forgets to change the password on his phone).

  I would like to allow this team and other access to the report of RADIUS authentications.

  I want them to be able to use their domain account to do this.<-------  this="" is="" mandatory,="" based="" on="" our="" security="">

  We tried using an account local and which works very well.

  My system tells me that domain accounts cannot access the administrative parts of ACS.

  Is this true?

  We have the support to allow us to upgrade to the latest version of the ACS.

  5.4 of the ACS, it is possible to authenticate and authorize the directors of external stores, including AD accounts

• POS and vlan

  Initial conditions:

  NET 172.30.157.0/24 with vlan 3032.

  I try to deploy Vmware DataProtection 6.1.1.

  Deploy device with vCenter and configuration of the network settings.

  

  After the restart the system in the virtual machine does not work because VLAN is not set up

  

  Configure the vlan according to manual http://www.UNIX.com/man-page/SUSE/5/ifcfg-VLAN/

  Parameters of comment in/etc/sysconfig/network/ifcfg-eth0:

  #IPADDR = '172.30.157.110'

  #NETMASK = "255.255.255.0" "

  Create new config for vlan /etc/sysconfig/network/ifcfg-eth0.3032

  STARTMODE = 'auto '.

  ETHERDEVICE = "eth0".

  ID_VLAN = '3032'

  IPADDR = '172.30.157.110'

  NETMASK = "255.255.255.0" "

  BROADCAST = '172.30.157.255'

  Restart the virtual machine and test that network will work:

  root @(None): ~ / #: ping 172.30.157.110

  PING 172.30.157.110 (172.30.157.110) 56 (84) bytes of data.

  64 bytes from 172.30.157.110: icmp_seq = 1 ttl = 64 time = 0,061 ms

  64 bytes from 172.30.157.110: icmp_seq = 2 ttl = 64 time = 0,037 ms

  64 bytes from 172.30.157.110: icmp_seq = 3 ttl = 64 time = 0.024 ms

  Network is working. But the console shows that the network does not work.

  

  Check the roads:

  root @(None): ~ / #: route ip

  by default via 172.30.157.254 dev eth0.3032

  127.0.0.0/8 dev lo scope link

  169.254.0.0/16 dev eth0.3032 scope link

  172.30.157.0/24 dev eth0.3032 proto kernel scope link src 172.30.157.110

  root @(None): ~ / #: route

  Kernel IP routing table

  Destination Gateway Genmask Flags metric Ref use Iface

  by default 172.30.157.254 0.0.0.0 UG 0 0 0 eth0.3032

  Loopback * 255.0.0.0 U 0 0 0 lo

  link-local * 255.255.0.0 U 0 0 0 eth0.3032

  172.30.157.0 * 255.255.255.0 U 0 0 0 eth0.3032

  Enter at the https://172.30.157.110:8543 / vdp - configure / and see the perfect situation:

  There are fields with netowork empty setting and there is not the label of fields

  

  Fill in all the fields? but they are red and nobody presses the button "next".

  

  Change the network setting in the/etc/sysconfig/network/ifcfg-eth0 and restart:

  IPADDR = '172.30.157.110'

  NETMASK = "255.255.255.0" "

  BROADCAST = '172.30.157.255'

  After the reboot the network does not, although VM ping of the network 'outside '.

  

  Look at the roads. There are two identical courses for different interfaces:

  

  Remove the road to eth0

  IP route del 172.30.157.0/24

  

  Enter at the https://172.30.157.110:8543 / vdp - configure /

  Now, the page is correct and the 'next' button is prerssed.

  

  After installation complete wizzard, I have a few problems:

  -root password does not change

  -integration with vcenter was not held

  -network windows do not work, because hadou presents two routes identical defferent from the network interfaces

  How can I configure POS with VLAN?

  PS: Sorry for my English.

  Hello

  Why try you tag VLAN in the unit?

  Why you do not configure the VLAN to the portgroup to map network application uses?

  Tim

• 6.1\ES3.0 ESXi5.1 and Splunk

  We try to make our ESXi host in before syslog on a splunk server. Problem is that we don't see newspapers not leave the server. We have the system configuration to prior to syslog through configuration\Advanced Setttings\Syslog.global.logHost the value tcp: / / < ip addy >: 1514. The ip address that is used is one of the forwarders. I have also validated Configuration\Security Profile\Firewall has the rule of porper implemented for outgoing Connections\syslog is set to allow tcp-UDP\1514-514.

  Are there suggests anything else that some might be able to try?

  Virtual infrastructure:

  • vCenter Server - Ver 5.1.0 build 1123961
  • Server ESXi - Ver 5.1.0 Build 1312873

  EGGS deployed device:

  Data collection node 6.0.1 Splunk for VMware version - 140403 has

  -Splunk 6.0.1

  -Contains all needed packages. (App/Suite, VMware - TA, TA-vCenter)

  -Splunk Technology add-on for VMware, Version 3.1.0 (ie the Splunk_TA_vmware app)

  -CentOS 6.4 (with SELinux disabled IPv6 disabled, NTP configured, the firewall is turned on, but TCP 8000/8008/8089/1514 and port 514 UDP ports are open)

  -Update VMware Tools 5.1 1

  Hello Michelle50,

  Thanks for the reply. It turns out that the service on the host computer has been tanking to a problem of disk space on the system of Splunk. We would run out of space (less then 15% disk space) and then the whole army would stop the syslog forward.

  Solution:

  More disk space is added to the instance of linux for Splunk

  Ran "esxcli system syslog reload."

  System received once more newspapers.

  Thank you

• POS and OES

  Dear guys,

  I would like to request backup to the top of my VM OES (500 GB) with POS on a stand of the host and the client to have a virtual machine recovered in 3 hours.

  I thought a full backup and incremental backups every 2 hours.

  How long do you think that would take the restoration (the 2 hosts are in the same network) and you have an incremental backup of all 2 hours is ok?

  Thank you very much in advance for your help.

  Daniele

  If you have enough disk space... 2 TB with (thick provisioning) should give better performance

  Otherwise, you can always deploy device 2 TB but choose a provisioning.

  Yes. VM backups will be stored on the disks in the unit.

• want to install trial - confused about the ip pool/ip addresses

  So I downloaded the FVO and attempted to deploy devices (latest version of 5.7.x). When I tried everything first he said I need an IP pool. OK, so I guess that... Well I don't know why I need a pool of ip, but I created an and associated with the correct vsphere portgroup/network. Now, I need to choose the IP address - he invites in trust manual/fixed or dhcp - of course, I want to give fixed ip servers, but then it says "ip address cannot be in ip pool.

  huh?

  I don't understand - what is the purpose of the ip pool, otherwise to assign ip addresses to the devices?

  no problem, thanks for the reply.

  I have re-read the start guide however, and this time it was spotted in the network settings section configures where he describes the creation of the pool:

  "Do not select the checkbox enable the Pool IP and do not specify a range of IP addresses. You specify it

  IP address for the virtual machines in the TIME using the Deployment Wizard OVF VAPP. »

  Weird - and it worked. Not sure why we need a swimming pool in the first place, then. HMMPH

• Requirements for vSphere remote site replication

  I run 3 Enterprise 5.5 x vSphere hosts in A Site with vCenter.   I want to add a new host in a remote site and configure vSphere replication between them.  Issues related to the:

  • Do I need to vCenter in slot 2?
  • If vCenter Site of A is the Site management and hosts of the Site B and Site A goes down, vSphere replicated VMs can be restarted to Site B without problem?
  • Is there a risk to not have a vCenter dedicated to Site B on the changeover plan?

  Thank you

  -Matt

  Hello

  (A) If you have vCenter in slot 2, you will need to deploy device VR and match two VR UI sites.

  In the case where something happens to site A, losing vCenter and/or VR device, you can use vCenter and VR device to site B to perform a recovery after disaster and put in place the VMS to site B, inside of vCenter inventory B.

  (B) If you have no server vCenter in slot 2:

  1. There is no need to deploy handset unit of VR (embedded DB for server VRMS + VR + VRMS) for site B.

  2. you can deploy additional device VR-server only for site B, so that the replication traffic goes directly from the source ESXi to the correct server in VR.

  3. If the disaster arrives at the site, you must have vCenter Server and VRM in the combined unit of VR upward and running order to use the VR UI to perform a disaster recovery. If vCenter Server or VRMS manage warehouses of data target is corrupted/lost, the only way to recover after a disaster is to consolidate recovery replica logs manually rename and replicated configuration files and hope that consolidated records represent a coherent source VM instance. This procedure is subject, not officially supported, and care must be taken when building the redo logs, in order to ensure the consistency of the data in the disks of the virtual machine, not some partial block updates.

  Kind regards

  Martin