Features of the Windows 7 task bar stopped working

Similar Questions

• After you have installed the Rosetta Stone, the Windows Control Panel has stopped working

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd

  Hey dododododo5

  you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below

  Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center

  If necessary, read the action recommended in the link below microsoft

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Rosetta%20stone%20Program

  If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Walter, the time zone traveller

• How to fix the windows live mail has stopped working a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available

  In the Middle looking emails from this error appears.  Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available

  Hello

  1. do you remember make changes to your computer before this problem?

  Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15

• No the Windows 7 TASK bar.

  After the execution of Windows 7 for 6 months, decided I wanted my taskbar on the right instead of the left, but when I did drag the taskbar to the left side to the right side of the screen, the taskbar disappeared. I tried to re-start (by pressing the power button on the PC). And the taskbar are still missing.

  I tried a right mouse... Customize... and selected of taskbar and MENU START to move the taskbar to the left side, but the taskbar is missing.  Also now when I do a right mouse on the desktop... then select Customize..., then select START MENU and TASK bar... the task bar dialog box does not appear.

  To sum up... I don't have to enter this mess was to drag the taskbar to the left to the right of the screen and the taskbar disappeared.

  Hello

  Have you ever had several monitors installed on this computer? Looks like the task bar may have been moved to a monitor that is no longer connected.

  Right-click empty spot on the desktop, and then select the Screen Resolution.

  If you see multiple display options, select the drop-down menu and click the option show desktop only on 1 . Click Apply/OK.

  Let us know the results.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• How to keep an application running on the windows xp task bar permanently?

  can someone tell me please how to keep an application running continuously in the windows xp taskbar? I think that this is really annoying when I have to click on it to launch it. the application that I want to run permanently is U torrent.

  remain permanently on the taskbar, a program to start when windows starts, refer to options in your program to see if you can start with windows, or if a function has been added to services in administrative tools, start, auto value.

  --------------------

  below to add programs to the quick launch:

  http://www.Dummies.com/how-to/content/how-to-add-applications-to-the-Quick-Launch-bar-I0.html

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/win_tray_add_program_quick_launch.mspx?mfr=true

• The Windows module installer has stopped working; I've tried patches offered by microsoft, without success...

  I get this error message saying updates cannot not be installed, including the update in windows update, that keeps me also looking for new updates. I tried to reset as suggested by microsoft of the DLL, but half of them reset properly in all cases.

  I am running windows vista family premium on a dell XPS M1530, any help is appreciated.

  BigPhut,

  Please post with the information requested here: what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Most of the Windows key tab key stopped working

  When I got my Asus laptop with Win7 Home Premium 3D key Windows + Tab worked.  It has now ceased.  Restoration of the "themes" service, as recommended by many blogs does not work.  Can anyone help?

  Try these steps, checking after each one to see if the problem is resolved:

  • Right click on your desktop, choose personalize, and then make sure that you use an Aero theme.
  • Type appearance in your Start menu, choose adjust the appearance and performance of Windows, and then make sure that it is set for a look
  • Type effects in your Start menu, then click on find and fix problems with transparency and other Visual effects
  It will try to solve the problem for you, so follow the instructions carefully.  Please let me know the results.

  Shawn B Keene | Microsoft contributor community

• Attention, windows media player has stopped working.

  Hello

  I still get the pop up that the windows media player has stopped working, to check the updates, etc nothing works! (vista 32) Examine the error log shows "flaws mcm2ve.ax module, version 7.3.0.16928. Any help would be most appreciated.

  Hello

  I still get the pop up that the windows media player has stopped working, to check the updates, etc nothing works! (vista 32) Examine the error log shows "flaws mcm2ve.ax module, version 7.3.0.16928. Any help would be most appreciated.

  Hey bellais

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If that does not fix it repost in the Sub forum

  Manage your photos and videos: play, burn, import and more with Windows Media Center, Media Player, or other programs.

  http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

  Walter, the time zone traveller

• Hi, I'm on a PC running windows 10. I just started using Lightroom CC and wildfire and feature drop for the sorting of the pictures in collections has stopped working. can someone suggest something please?

  Hi, I'm on a PC running windows 10. I just started using Lightroom CC and wildfire and feature drop for the sorting of the pictures in collections has stopped working. can someone suggest something please?

  Your catalog backup and reset the preferences as mentioned wobertc

  Press the shift and Option on Mac, or the shift and Alt PC (windows) keys. Select Reset preferences

  

  ~ Assani

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update the status bar stopped working

  I have a HP Pavillion g7 Notrbook PC Windows7 and I get a popup telling me that my system update status bar stopped working. It has a very long error message. I am a novice at using a computer at home and don't know where to go for help or how to fix it. Can someone help me?

  Thanks in advance for your help.

  DACUA

  Say hello to new jim5840.

  Then, when you go to the "Startup" in msconfig tab there are no set Office agent or anything that looks like that?  Before continue with the steps I saw then I would like you to check that you don't see anything that resembles this name under the 'Services' or 'Starting' tabs

  I still believe that it is an application that will be started when you start in Windows.  So the next step will be to try to use a clean boot to resolve the problem.  A "clean boot" means that Windows will load only the system files when it starts and will load all the apps with it.  Try the following.

  1. Click Start, type "msconfig" and press ENTER.
  2. This time, you will stay in the 'General tab '.
  3. You should see "selective startup".  Ensure that this field is selected.
  4. Deselect the option "Load Startup items".
  5. Apply the changes and restart the laptop.
  6. Display the result.

  I'm waiting for your answer; have a great day!

• T500: The Start Menu/task bar unresponsive (freezes for a second or 2)

  I have hesitation that the xp/vista way organizes the start menu/task bar, so I use classic windows btw. Sometimes when I click programs on the start menu, task bar hotkeys, nothing happens (unresponsive for 1 ~ 2 seconds) which is disturbing. I tried the fix from microsoft for the absence of reaction for a long period of time, but I already said. Someone knows how to fix this?

  HD is not only 5 400 rpm on a 250 GB drive, solid state drive. Vista Business x 64 for my OS. The problem seems to have disappeared now, except my menu start will sometimes wobbly (after deleting all vantage-ware pre-installed).

• Windows Media Center has stopped working (after the great October Windows Update).

  In October, there was a Windows update that broke my Media Center (and THXaudio.exe) I was able to restore and put off the various updates until I recently needed to shut down the computer for a clean material out.  Even though I had several valid restore points before the updates available, I was not able to use the system restore (says a file is missing) and also not able to restore all the features.

  First of all, I tried different patches of problem I already found online: I used the "sfc/scannow" and it always shows the files that need fixing (but he can't fix them). I tried the system restore (and broke). Deleting the database file does not apply. I even "turned off" WMC and not turned back on - no chance.

  Here is the text of the two errors:

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: ehshell.exe
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bd053
  Fault Module name: KERNELBASE.dll
  Fault Module Version: 6.1.7600.16385
  Timestamp of Module error: 4a5bdfe0
  Exception code: e0434f4d
  Exception offset: 000000000000aa7d
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  Description:
  Stopped working

  Signature of the problem:
  Problem event name: CLR20r3
  Signature of the problem 01: thxaudio.exe
  Signature of the problem 02: 1.0.6.0
  Signature of the problem 03: 4a9f80d2
  Signature of the problem 04: Microsoft.VisualBasic
  Signature of the problem 05: 8.0.0.0
  Signature of the 06 problem: 4a277ad7
  Signature of the problem 07: 5 c
  Signature of the 08:0 problem
  Signature of the problem 09: System.BadImageFormatException
  OS version: 6.1.7600.2.0.0.256.48
  Locale ID: 1033

  If necessary, I can post the cbs.log file results.

  UPDATE:

  I did an upgrade "on the spot" my DVD of Windows 7 and everything is back to normal.

  Now, I also have 63 'updated important"weed through, one at a time, to see who can be installed safely, and who eventually was my setup.

• 1 program still needs to be closed: (waiting for) task host window's task to stop execution and stopping tasks that are already running

  While the closure of the pc I got the message: "1 program still needs to be closed: (pending of) task host window's task to stop execution and stop tasks that are already running".but there is no program running and I have to force it to close.how to solve?

  Hello

  Thank you for contacting Microsoft Community.
  Windows, then closing, checks all open programs. If there is, it sends a request for the program to close and wait until the program closes safely, to avoid any loss of data. But, Windows is waiting for some specified
  If you are sure that none of the programs are obviously open, you can try the following steps:
  Press Windows key + r, Type regedit and pres enter. If UAC prompts, click Yes. Go to HKEY_LOCAL_MACHINE-> expand System-> expand CurrentControlSet-> click on command (exapnd no do this). When you click (or select) control, you can see WaitToKillServiceTimeout. Double-click it to change the value. Set the value to 500 or less than that. Click Ok, and then close the registry editor. Now, restart the PC. If the problem persists, stop and try again and check.
  Be careful with registry access as incorrect values or remove the unknown keys can prevent Windows to start and it will fix it.
  Response if the issue is not resolved.

• Can I create a personal task bar that works like the quick launch area

  Windows 7 has just been put on my computer. I had Windows XP before and I loved the quick launch task bar. With this bullcrap "Pin to Taskbar" if I nailed everything I had in the quick launch area I wouldn't have room for anything else on the taskbar. Is it possible to create my own taskbar to bring all these links in? Or we can suggest to Microsoft that they give back one of the best things about XP instead of this "pine to." I couldn't find anywhere to give feedback to Microsoft.

  See if the information at these links are easier. It should be a wink to do.
   
  http://www.SevenForums.com/tutorials/888-quick-launch-enable-disable.html
   
  http://www.howtogeek.com/HOWTO/Windows-7/Add-the-Quick-Launch-bar-to-the-taskbar-in-Windows-7/