FF opens without me it starts when the computer starts with unwanted Bing or tabs tab

Similar Questions

• System hangs when the computer sleeps with error KMode_Exception_Not_Handled after generation installed 9926

  Since the new version update (9926), whenever my computer goes to sleep or when it is left for several hours compress I get unhandled KMode Exception error.  I deleted a suspicious program who has problems during the previous generation, but that made no difference.  When the computer restarts, I wonder if I want to use the previous windows platform and I encounter the KMode problem, but after a day or two, the computer did an update to 9926 and I started having the problem again.  I looked for all devices that are evidence of a driver problem and have not found any.  Tech is able to examine the file DMP to give me a clue as to the program/device must the fixed driver so that I can get past this error?  Here is a link to the folder that contains the file.

  https://onedrive.live.com/embed?CID=932A5B907D806E8A&RESID=932A5B907D806E8A%21225306&AuthKey=AMaX68Y4-fpbXcE

  I looked in the pilot and I have the most up to date, but I was able to solve the problem until the next update by turning on my screensaver and do not allow the HARD drive to sleep.

• When I go on the site of adobe and then try to download the software, a message appears saying that safari can't open a page that starts with "Mao."

  I bought a subscription to a cloud creative adobe Photoshop and Lightroom. When I go on the site of adobe and then try to download the software, a message appears saying that safari can't open a page that starts with "Mao."

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Software HP C4380 printer causes delays when the computer starts.

  I don't know what triggered the problem. I had unplugged the printer and reinstalled. Now, when the computer starts, it hangs for 2-3 minutes seeking a device to the USB location 0. That remove the HP software solves the problem. I installed with the latest HP drivers and tried to use only the printer drivers without the scanner software. If I avoids the HP software, Windows installs with a Jungo win driver that causes the same result. It could have been an update of my Windows XP Home SP3 in the meantime I demolished the printer and reinstalled, but I can't follow any other changes.

  Now the printer is useless because of this problem. HP forums suggested disabling a program of tracking of HP under Services.msc, but who has also failed to solve the problem. Any suggestions?

  check the clean boot state, this might help you http://support.microsoft.com/kb/929135

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• Effectiveness of password computer when the computer is open

  The computer access password act as a block, restrict or prevent access to the computer by unwelcome intruders, when the computer is open?

  D I'm Kaye

  When you put the password on your computer only people who know the password can log into the account protected by password. When your computer is started, or is in sleep or lock, when you try to access it, it will ask for the password.

  However, when you already login in your PC and if you just leave your PC, other people could access while you are connected but you can either lock the PC when leave you or stop or turn sleep mode.

  You can also change the setting in a way to browse automatically sleep mode or even display the server if you do not use your PC after a period (e.g. 15 minutes) and when someone tries to access the PC, he or she will need to enter password.

  For better security, it is also recommended to protect your system with bitlocker, for protection (if the version of your Windows supports this feature):

  http://Windows.Microsoft.com/en-us/Windows7/products/features/BitLocker

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• no service to customer without having to pay when the product does not work?

  no service to customer without having to pay when the product does not work?

  You will need to tell us more of the history for anyone to be able to give advice. The WHOLE story would be great!

• How can I configure numerical Lock ON when the computer starts?

  I have a new laptop HP G70.  In the User Guide HP G70 on keyboards - C01540939.pdf, paragraph 3 using keyboards & pointing devices, Page 8 there is a note "the function of the keyboard that is active when the computer is turned off is restored when the computer turns on.   This does not work on my computer HP G70.  It always starts up the number Lock OFF.   How can I configure my computer to set the digit Lock ON when the computer starts?  I always use the number keypad and never use page up/down - button on top/bottom/right/lelt arrow.

  Also, how can I configure my computer to set the touch mouse on the computer OFF for the start.  I always use an external mouse.

  Any help would be appreciated.  It is a simple thing, but the present operation HP G70 is most annoying.

  PLEASE DO NOT CONTINUE TO MEET THIS PROBLEM!

  THE HP G70 WAS FAULTY!   EACH HP G70 HAS THIS PROBLEM!

  HP REPLACED MY HP G70 WITH a HPdv7.  THE HPdv7 PERFORMED THE DESCRIBER NERMAU LOCK FUNCTION AS IN THE HP INCTRUCTIONS.

  .
  
  Bob_in_PGI

  I'm surprised that nobody knows how to set the Num Lock at startup before you connect.  Where is the help of HP?

  I now have Windows 7 64 bit.

  There must be someone who knows how to do this.

  Bob in PGI

• When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

  When the computer starts, it reads configuration updates 1 3-0%, but it continues
  Latest Windows Update 12.8.09; do not update since 12.8.09
  Display of error code 8070002.
  Mechanic charged and removed the registry and advanced system care3

  Hello

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  ------------------------------------------------

  Check the above and you may need to use these methods to interrupt the cycle.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• My printer is configured to start when the computer turns on. I want to reconfigure it so that it does not turn

  My printer is configured to start when the computer turns on.  I want to reconfigure it so that it won't turn.  I know this is probably a simple change, but I can't find the path anywhere.  Any help?

  I guess you do NOT mean that you have both printer and computer plugged into the same power strip and both are turn on when you turn on the power strip.

  As nearly as I can determine the rather thin material in the Guide for the Dell P713w user, probably have enabled "Eco-Mode" or the mode 'sleep '.  See page 19 of the User Guide (if you don't have it, download it here: http://support.dell.com/support/edocs/systems/PRN_P713w/en/index.htm).

  When this feature is enabled, the printer goes into mode low power when it has been idle for a while.  When the computer is off, the printer is by definition inactive and so will go to low power, shortly after that the computer is turned off.  When the computer is turned on, it detects the presence of the printer and connects to the printer.  Apparently, the printer interprets this string as the "no-idle" and out of his low-power mode, which appears as if it is "turn on."

  In addition, this printer performs an automatic maintenance cycle every week if it is plugged into a power outlet. It will briefly exit Power Saver mode or turn on temporarily if it is disabled.

  At least one of the lights on the printer flashes power on and off when you think that the printer is turned off?  If so, it is in energy saving mode.

  Of course, I may be totally wrong, but it seems to me if you actually turn off the printer by pressing the button on / off on screen, he should not be able to auto (except once / week maintenance cycle).  From the Manual:

  Note: When the printer is turned on, press [power] to switch to the power saving mode. Press and hold [power] for 3 seconds to turn off the printer.

• Direct Media starts when the computer is on turn off

  Original title: Media Direct

  My Media Direct launches only when the computer is turned off. I have Vista Home Addition. When I turn it on, it will not start... Help, please!

  Hello

  1. you receive error message with media direct?

  2. it worked earlier? If so, remember you make changes to your computer before this problem?

  3. are you referring to Dell Media Direct?

  Try the suggestions only if you are using Dell Media Direct

  You can visit this link and check if it helps: http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_330711&isLegacy=true

  You can also post your questions in the dell forums by following this link: http://en.community.dell.com/support-forums/laptop/default.aspx

• Windows Defender will stop when the computer starts

  Windows Defender goes off when the computer is started and occasionally when the computer is running. I bring up the Control Panel icon, click on restart and restart the program. I had this problem for a week but have not added new software for a fortnight. Everything ran happily until a week ago. I am running Windows Vista Home Basic on a Packard Bell Imedia 3312 UK computer, purchased in April 2009

  Are you by chance using AVG 9.0 for your antivirus package? This version of AVG 9 automatically extinguished Windows Defender. Microsoft® Security MVP, 2004-2009

• How to remove temporary files, waiting to be written to disk when the computer starts? __

  How to remove temporary files, waiting to be written to disk when the computer starts?

  Hi Reasman,

  Welcome to the Microsoft answers site!

  To clear pending files, select the files/folders in the 'Files to add to the CD/DVD' box and press DELETE. However, if you want to delete all files, click the CD/DVD drive and select 'Clear the staging area' from the context menu.

  You can manually delete the files that are stored in the following location:

  %USERPROFILE%\Local Settings\Application Data\Microsoft\CD Burning folder

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support