FF23.0.1 crashing. Cannot fix. FF24 work

Similar Questions

• Could not get computer working properly due to malware. Went to safe mode and cannot fix. Can we please hep

  Annot get computer works correct due to malware. Went to safe mode and cannot fix. Can we please hep

  Hello

  1. what exactly is the problem?
  2. Why do you think malware are causing this problem?
  3. What have you tried in safe mode?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375

• sfc/scannow cannot fix corrupted files windows 8. DISM / /restorehealth//cleanup-online image does not work! Any help appreciated.

  Hello

  I can't try to repair the corrupted files on my Sony VAIO laptop to Windows 8. I hope someone can help me solve my problems. I would really like to know how to fix these problems I'm having. It really gets me.  If ever I have similar problems in the future.
  All my drivers are up to date. I'm pretty confident that's not a malware issue. I take care of my line on activities that could infect my computer. Although I'm not 100% that excludes. I use Mcafee security Suite (fully updated and free with my broadband package). No other scanners time real AV are running. I However sometimes use a registry cleaner, after installation and installation of various programs. but I only use the default methods, never the registry COMPLETE cleaning cleaning method. In my view, these could create problems if used files. I also defragment my HARD drive of 1 TB at least once a week.
  DISM / / cleanup-image online /restorehealth/ also is not working error message and log files can be found below!
  I ran sfc/scannow and several times,
  whenever I get the error message stating:
  Windows resource protection found corrupt files but was unsable to correct some
  of them. Details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper.
  For example C:\windows\logs\cbs\cbs.log. Note that iis logging currently not
  supported in offline maintenance scenarios.
  When I reboot win 8 after running sfc/scannow. Windows 8 shows that it is far from my system of up to 100%
  It charges fine. I have run the sfc/scannow, and then he did exactly the same thing. I reboot and it updates my system. but does not not my files corrupted!
  CHKDSK /F also freezes 27%. But when I starts in the my Sony VAIO #1 recovery disk and run diagnostics hardware HARD drive repair tool to try to fix the sectors defective etc on my HARD drive
  which works 100% and says there is NO problem!
  Here are the files of newspapers that I can access. I have to admit, now, that I do not understand them.
  even after much reading online:
  20/07/2013
  sfc/scannow eror message =

  Windows resource protection found corrupt files

  but has been unable to find some

  of them. Details are provided in the CBS.log newspaper

  windir\Logs\CBS\CBS.log for example C:/windows\Logs\CBS\CBS.log.

  Note that logging is not currently supported in offline scenarios.

  (ACCESS DENIED) when I try to open the C:/windows\Logs\CBS\CBS.log log file.

  DISM / online/cleanup-image /restorehealth/

  21/07/2013 of the log files and error messages

  0x800f081f

  the source file is not found

  Use the source option to specify the location

  the files that are needed to restore the function. To learn more

  information on the specification of a location of the source,

  See http://go.microsoft/fwlink/?linkid=243077

  The DISM log file can be found at C:\windows\Logs\DISM\dism.log
  I hope that I can help to solve the problems of thses
  concerning
  How to run the command "SFC/scannow" at startup or in Windows 8
  Information

  This will show you how the sfc/scannow command to start or in Windows 8 in an attempt to trouble altered or modified system files.

  Tip

  If you get the error that Windows resource protection could not start the Repair Service when you try to run the SFC, then make sure that the Windows Modules Installer service is active and set to Manual.

  Services - Start, Stop and disable in Windows 8

  If SFC is unable to repair the system files corrupted because the Bank (source) is damaged, then you could run the Dism/online/Cleanup-Image /RestoreHealth command to set the Windows component store corruption and then then try to re-run the SFC scan.

  OPTION ONE

  To run the SFC/SCANNOW command. at startup

  
  1. open a prompt at startup.

  2 in the command prompt, type diskpart and press ENTER, and then type the size of the list and press ENTER. (see screenshot below)

  
  
  
  3 make Act your boot drive drive letters (ex: 350 MB "System Reserved" partition) and the drive of Windows 8, type Exit , and then press ENTER. (see screenshot above)
  NOTE: If you do not a "system Reserved" partition and are not multi-boot with other operating system, then the boot drive and the drive of Windows 8 may be the same drive letter.

  4 in the command prompt, type the following command and press enter. (see screenshot below)
  NOTE: , You will see a blinking cursor at the prompt to the end. It will take a while to finish running though.

  sfc/scannow damaged = C: \ /offwindir = D:\windows

  Note

  You need to replace the the drive letter of the partition or volume where your Startup system files are stored in the offbootdir = C: part of the order above instead.

  You need to replace the letter of your partition or volume Windows 8 in the offwindir = D: is part of the above command instead.

  
  
  
  5 when the analysis is finished, I hope you will see an everything is ok message as below.
  
  
  
  6 close the command prompt and restart the computer to start Windows 8.
  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file system occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  SECOND OPTION

  To run the SFC/scannow command in Windows 8

  
  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, type sfc/scannow , and then press enter. (see screenshot below)
  NOTE: It may take some time to complete the race.

  
  
  
  3 when the analysis is finished, I hope you will see that all is ok message as the screenshot below.
  NOTE: Fortunately CFS was able to repair my files automatically damaged system.
  
  

  

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  OPTION THREE

  How to see and read that only "CFS" Scan results from CBS. JOURNAL

  NOTE: SFC when is running, it records its actions in the C:\Windows\Logs\CBS\CBS.log. The steps of this option will show you how to view only specific SFC entries with the [SR] tags in the CBS.log newspaper. This can be useful to show you what files SFC couldn't fix automatically if you want to try and manually change them.

  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, copy and paste the following command and press enter.
  NOTE: This will place a file sfcdetails.txt on your desktop with only the SFC scan details of the results of the CBS. Log in this.

  Code:

  findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
  

  3 close the elevated command prompt.

  4. open the file on your desktop to see the SFC sfcdetails.txt analysis details in convertible bonds. NEWSPAPER.

  5 when you are finished, you can safely remove the sfcdetails.txt file later if you wish.

  Tip

  If you need to replace a corrupted system file that SFC cannot fix, this will show you how to:

  If you have many files are corrupted, then run Dism/online/Cleanup-Image /RestoreHealth to repair any component store corruption, restart the PC after and try the sfc/scannow command.

  If you have only a little, then you could manually extract a new copy directly from your installation of Windows 8 DVD or USB thumb drive, or ISO if file in a virtual machine.

  Check out the Windows 7 Installation DVD files

• Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it.

  Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator

  What is the format of your final work? How are you viewing? What version of Illustrator do you use?

  Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?

  Is your type on a layer that is set up to print not? Is your white type and position it to overprint?

  

  

• Given that I have updated to 2015 CC, cannot save SVG work plans. Always record the leaves whole and not separate icons. No idea how to resolve this?

  Given that I have updated to 2015 CC, cannot save SVG work plans. Always record the leaves whole and not separate icons. No idea how to resolve this?

  Hello

  We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

  Kind regards

  Ashutosh

  The name of the Illustrator team engineering

• Pavilion dv6700: Pavilion laptop computer under Vista: Windows does not start, the Startup Repair cannot fix it. What to do next?

  Hello
  My laptop seven year old made me proud til yesterday, but now it does not fire upwards. Instead, it hangs for a minute or two (black screen, no HARD drive light blinks, nothing), while it charges to a screen with two options - either start the system restart or start Windows normally. The second option takes me around the loop again. The first option tells me that it cannot fix the problem automatically. When I display the error details, it lists all of the tests, as adopted successfully, but ends with the words: "Root cause found: failure so that the Setup program is underway.

  I'm sure I know why she fell: two days ago, I left all my files on a portable player and defragmented the disk. The idea was to speed up the machine and get it running like new. He immediately started to hang when connecting, so I thought, well I'll go for a complete restoration of the system. I followed the procedure using the disks provided with the machine, and that's when it stopped working completely. I felt that this was more than the aging than HARD drive could take.

  My attempts at rejuvenation have actually caused his untimely death? Or is there a difficulty - something I could undertake?

  Or should I just bite the bullet and go and buy a new machine? When everything (screen, keyboard and trackpad) worked so well, it seems a shame...

  Any help or thoughts welcome. Thank you

  If you really want to resurrect, you could certainly purchase a new hard drive and try to restore the system of work using the recovery media - but then, even if it did work, you would have still lost all your data, settings, and applications in the process - and having to reinstall all your applications everywhere again.

  Hey, don't feel bad, I'm guilty of this too - has recently attempted to resurrect an era Tablet XP PC so that it can run Win10!  He went from XP to Vista, Win7, for Win8 - and along the way, gains of new memory and drives hard - but the Win10 bet was too.  So, I got to a "give up to use it.

  However, I also kept a cell phone 5 year alive by replacing the HDD with a SSD and adding more memory.  So now it is faster than ever, it has been and works like new.

  But... He has NO touchscreen, there no USB3 ports, it doesn't have 1 GB ethernet - and the list goes.

  Thus, it works very well for what we use it for - but it can't really be upgraded, so sooner or later, we will have to replace it.

  Everything depends on how much you need 'new' - touch screen, stylus, handwriting, camera, 3 USB ports, display port jack, HDMI ports... etc.

• I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  I can see the webcam on my Dell Latitude D630 laptop, but cannot make it work on Skype... This isn't seeit. How to activate the webcam to use?

  Hello markward4905

  You should be able to download the drivers from the website of the manufacturer of your web cam.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer:www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• get 80070002 error, Mr. fix cannot fix

  get 80070002 error, Mr. fix cannot fix

  Follow the steps described in this article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• How can I fix my DRM when none of the suggested fixs have worked?

  I'm currently under Vista Home Premium 32-bit pk2 service.  I tried to download audio books from my local library and got the DRM error.  So far, none of the suggested fixs have worked.

  Assuming that your problem has not been resolved (or your question has not been answered to your satisfaction), please uncheck my previous answer as the ANSWER and score than the other answers as RESPONSE unless & until your problems have been solved (or you decide to post in another forum instead). Please do it now, before you reply to this message, to avoid confusion. Thank you.
  

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

  1. when (date about) don't you buy the computer?

  2. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  3 a Norton or McAfee application ALREADY installed on the computer?

  4. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  5. what 'DRM Question' are you having?

  5b. what the "Media Windows Security Update" KB number you have installed or tried to install to solve this problem?

  6. ALL other updates following listed in view installed updates (not Update History) are they? [1]

  (a) KB2675157 and KB2653956;

  (b) KB2621440, KB2641653, KB2665364 & KB2647518;

  (c) KB2654428, KB2633874; KB2598479, KB2631813, KB2644615, KB2585542; KB2633171, KB2393802 and especially KB971029

  (d) KB2544521 or Windows Internet Explorer 9 ]<=TELL me="" which="">

  7. If Windows Vista Service Pack 2 (KB948465) is listed in view installed updates, when (the exact date) he was installed according to the history of the update (this time)? [2]

  8. what version of Java is installed?  TEST HERE-online http://java.com/en/download/installed.jsp

  9. is Firefox, Chrome or any other alternative browser installed?

  10. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; CCleaner)?

  11 have you ever done a repair installation or a clean installation of Vista for some reason any?

  ====================================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

  [2] start | Control Panel | Windows Update | Update of the story (in the left menu)

• Vista crashes-cannot recover save point. a way to recover lost files and avoid crashing

  Vista crashes-cannot recover save point.  a way to recover lost files and avoid crashing.

  E-mail address is removed from the privacy *.

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 boot CD system recovery cannot fix the Master Boot Record is damaged or missing?

  This question is on the drive that Windows 7 users can make by going to the backup and restore > create a system repair disc, and then burn the disc.

  Windows says that this disk can be used to start the computer. However, you will not necessarily be able to boot your Windows 7 operating system from the hard drive. When I had a problem recently (shut down system and on reboot I got a message BACK that says "Boot MGR missing") this disc is not to try to do a repair. In the system recovery Menu, you see here when you start the CD:

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery...

  I chose "Startup Repair" and he couldn't fix anything. I ended up cloning of my hard disk from a backup.

  Of http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7

  "Are there problems that Startup Repair cannot fix?

  Startup Repair can only fix certain problems, such as missing or damaged system files. He can't fix the failures of hardware, such as a failing hard disk or incompatible memory, nor it protects against virus attacks.

  Startup Repair is not designed to fix Windows installation problems, is not a backup tool, so it cannot help you recover personal files, such as photos or documents. To help protect your computer, back up your system and your files regularly. For more information, search for "backup" in Windows Help and Support. »

  So here's my question: how to create a bootable CD that has everything you need to fix the Master Boot Record, whereas in case your startup files are damaged, altered, or deleted (and of course, you can not start your system from the hard drive) it will be either fix the files on the hard disk or at least still start your operating system on your hard drive?

  To answer my own question (which becomes a habit on this forum): http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html

  It turns out that the repair CD Windows 7 Sytem that I had done was the right tool for the job but I didn't know how to use it. The above link explains how to use the command prompt window to repair the boot record.

  Other advice, I had was to have used the "Startup Repair" option in the Tools menu of recovery after launching the repair CD, but then he runs three times. For some reason, it takes three times to run before it can solve the problem. I think that the command prompt window method is probably more reliable.

• PS is crashing.i can do work but the installation appears incomplete

  Tech said to say that PS crashes. don't know what that means. I can work with the tools that are around my computer screen, there is no bckgroun to block my screen so I can see the icons and it's distracting

  Please help an old lady.

  installation may be faulty?  I have same cs5 for windows and it works perfectly.

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]

  [Moderator edited the title to make it more clear]

  Former title read:

  had a split screen question in cs5. any help tel75405 told the post here.said ps is crashing.i can do work but the installation seems incomplete I can see my screen interface PS does not cover all please help an old lady

  If you prefer to have the whole screen filled even if you have a small image, go to the window > Application frame

  

• Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - alwa

  Using a Mac OSX updated 10.9.5, to update to the latest update of Lightroom, now get error - Lightroom met permission issues. Click on fix - cannot fix. You click on read more and I tried all the solutions. Always error. Uninstalled and reinstalled - always error.  Cannot set up a new admin on Gov't computer user. Help

  Please make sure that you gave permission for the folders listed in the article, follow these steps.

  1 - give read and write permissions for the Application Support folder and preferably on User Library and the secret library.

  2 - Add user and admin both permissions.

  When you open the Get Info option for specific folder.

  Make sure you click on '+' symbol, it will open the list of user accounts. Add currently logged in user account and Director of user account, if it is not added.

  Both must have read and write to prevent access these some questions in the future.

  Important:

  Once you added as currently logged on user account and administrator user accounts and provided access for reading and writing.

  Make sure you click on the gear icon and select apply to closed.

  Lock dialog box and close the Get Info .

  So that all the folders in the folder Adobe will get read and write access.

  

  Let us know if this helps

  ~ Assani

• Help! Illustrator crashed unexpected when I work with her. Only a reboot allows, after abandoning the preferences. Who knows what bug this is?

  Help! Illustrator crashed unexpected when I work with her. Only a reboot allows, after abandoning the preferences. Who knows what bug this is?

  If we could, we could make a lot of money, solve problems.

  But unfortunately, we can not just from your description. Please give us the details.

  What version?

  What system?

  Third-party plug-ins?

  All corrupt fonts?

  What hardware is connected?

  You have a printer installed?

  Font management?

  What exactly were you doing when it crashed?

• Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

  Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

  Move on to the Discussion of Photoshop