Field2 browser makes extremely slowly

Similar Questions

• Satellite M30: Hard drive extremely slowly

  Hello!

  I'm from Germany, so excuse my mistakes!

  A few months ago, I bought a used satellite M30 laptop. I'm right with the seller on the guarantee, because he said it has 1.5 years and then it should still be under warranty.

  Now my problem is that the hard drive (Toshiba MK6021GAS) became very slow. It's playback with a speed of only 2.5 MB/sec. I tested it with HD Tune tool. I already checked on the internet and it should be much faster. My extern harddrive has a speed of around 28-30 MB/sec, so I use most of the stuff on this one for now.

  I would like to know if there is still hope to fix (perhaps even by myself) or if I have to buy a new hard drive.
  There are 2 remarkable things I've done, which may have an influence on it.
  1. the seller in portable format whole before selling it, so I had to use the recovery CDs system to make it work again.

  2. I changed one of the blocks of 256 MB of RAM with a 512 MB RAM block, that I bought for my previous laptop. I checked if the new RAM worked well and the list of hardware as it shows correctly.

  Hello

  The RAM will be shown, but are you sure that the new module has the same bus as the original speed?

  I recommend you to preinstall the device with the recovery media and check the HARD disk activity. Also, test it without second RAM. If the HARD disk is running slowly again contact the Service partner and let them verify properly. If the disk dies HARD drive will be replaced.

• Put into service takes more than 15 minutes. Stop is worse. It hangs at "closing Windows" regardless of the programs that I run is extremely slowly.

  Original title: start & close problem. Slow response

  My PC is running Window XP SP2. I did all the updates.

  Recently commissioning takes more than 15 minutes. Stop is worse. It hangs at the "closing Windows.
  Whatever programs that I run is extremely slow.
  I ran virus scan, microsoft fixed, but the problem persists.

  Well, I think you don't like it, but the first thing to do is to eliminate by using their special tools Norton Uninstall program:

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home

  Now, you might think I be without protection and get some bad things on my computer, but you just want to see how things are going without it.  Just don't visit WWW stupid or silly sites, where you can pick up some virus or malware and you can always install a new copy, but I think it's a big headache for you now.

  It might be out of date, too many options of protection installed, etc.  More protection is not always better, and you will pay for it in the performance of the system with the more stuff you add.

  Then when Norton is gone, proceed as follows:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Consider instead of Microsoft Security Essentials or Norton - he did a good job.

  We must eliminate what can cause problems, so I'd start with Norton.  You can put it back later if you want, but you need to see how things are going without it.  Moving things to a good operating system that you are happy with first.

  Eliminate potential problems one at a time and test thing out... one thing at a time.

  Symantec/Norton is you biggest problem right now.

  Check your NVIDIA drivers:

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the DRIVERS GRAPHICS button to start scan and answered in the affirmative, if asked to install the plugin required to run the NVIDIA scan.

  Get rid of Norton.

• have 8 GB of ram, but seems like all cached then run IE9 makes so slowly. Is there a way to clear the cache

  have hp computer with 8 GB of RAM running on vista 64-bit and see lately all put physical memory cached in the Manager of tasks with almost no free left.

  is there a way to clear the cache?

  Thanks in advance

  The value specified in the 'Cache' in the Task Manager includes more than the real system file cache. In particular, it includes the pending list. There are programs and files that have been previously referenced and the Windows file previously read. The waiting list pages can be reused immediately if an application requires more memory. There is an article with the definitions of the terms used and an introduction to the management of memory here:

  http://blogs.msdn.com/b/ntdebugging/archive/2007/10/10/the-memory-shell-game.aspx

  To see your use of memory more in detail, download and run Process Explorer from here:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  Go to view > system information. (or Ctrl + i). Select the memory tab and view the information in the left column under Commit Charge and physical memory.

  To better answer your question, please provide the following details.

  • Describe in more detail what you mean by Internet Explorer is slow.
  • Being of other applications of runs slowly or only Internet Explorer?
  • How many tabs you have open and how many other applications is running when Internet Explorer is running slowly?
  • You are running Internet Explorer 32-bit or 64-bit? See this article to know that if you do not know: http://blogs.msdn.com/b/ieinternals/archive/2009/05/29/q-a-64-bit-internet-explorer.aspx
  • In tools > Internet Options > advanced, which is the scene of "use the software instead of rendering GPU rendering?

• A script on this page slows down your web browser to run slowly.

  OT: Win 7 very slow operation.

  This problem started a week ago, and since it's spring break I decided to not deal with it until the end of spring break, so here I am. The last thing that I remember that windows was have an update, so I thought that was the problem. I did a restore of the system for this update and that did not solve the problem, so I decided to system restore a fortnight before an another update. This also did not fix the problem, also before every system restore, I scanned with Malwarebytes Premium & AVG Premium or whatever of the paid version of AVG is without any result. So, I have now decided to go to safe mode and scan because it might be something blocking it and still nothing. Also, I just remembered something pops up saying "Web Browser" became unresponsive, and when I press the button to end that my computer runs at the speed normal than it used to and I think that all that is "Web Browser" is the source of my problem (s). Web browsers, I have installed are IE, Opera and Firefox. I also did a search on "webbrowser" bing to see if this is a real program, and the only thing I found was that it is a Gimp plugin, which I use on a daily basis, so I found and deleted the plugin in Gimp program files and it has not fixed the problems. The only reason why I was able to come on these forums is because the thing "Web browser" popped up and I was able to stop him... I also took a screen shot of it to see if anyone of you thin people know a solution to my problem. Thank you

  Nate :) - my Acomputer is also an Acer Aspire 5745

  

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1 did you the hardware changes to your computer before the show?
  2 are you using Internet explorer as your default browser?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur either because corrupted Windows files or presence of viruses or malware.

  For slow Windows performance issue, I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Difficulty of Windows system performance slow computer problems
  https://support.Microsoft.com/en-us/mats/slow_windows_performance

  If this does not help, use method 2.

  Method 2:
  Microsoft safety scanner run and check the issue.
  Reference:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If you use Internet Explore browser by default, then for browser script errors, I suggest you to refer to this article and check if that helps.
  Reference:
  How to troubleshoot script errors in Internet Explorer
  https://support.Microsoft.com/en-us/KB/308260

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• First Pro CC running extremely slowly when editing

  Hi all

  I'm on a MacBook Pro

  OS 10.8.5,

  Graphics, AMD Radeon HD 6750 M 1024 MB,

  16 GB OF RAM,

  and first is so slow with each edition I'm going to plant. Editing is impossible, even if I just changed without problem on the same project 24 hours ago and I have not submitted new media.

  I went through the motions to reboot several times, cycling the power on my drive RAID CalDigit, upgrade my Adobe application and create a new project and bring my sequences via Media Browser. I'm not trash my preferences, because when I go into the Preferences folder there is no file Prefs.psp in there (weird, right?).

  Any advice would be a lifesaver!

  Thank you so, so much.

  Hello

  Reset preferences is the first thing I would say.

  For Mac OS, delete or move the following files/folders (or backup)

  File: OS/Users/Library/Preferences/com.adobe.AdobePremierePro.plist

  Files: OS/Users/Library/Preferences/Adobe/Premiere Pro/8.0

  Documents/Adobe/Premiere Pro/8.0

  Hope this helps,

  Regalo

• InDesign cs4: why some documents extremely slowly?

  I'm working on an iMac (core i5 2.8 ghz, 8 GB of memory).

  Some documents are incredibly slow on my iMac - on others in the same office that documents work correctly.

  Even if I put the image preview to 'low' after each action - selecting a tool for selecting a box, no matter what, even minimally, it takes at least 10-15 seconds before I can make a new action.

  I suspect it has something to do with the settings of the EPS, but I can't find anything that seems to be the reason for the slowness.

  I hope someone can help me!

  Try disabling dynamic preflight. Documents with references, particularly the references to other files, will be very slow, unless all of the referenced files are open.

  If you store links on a network, make sure that you use the same network protocol to access the server as your colleagues.

• Windows 'Help and Support' loading extremely slowly

  When I press 'F1' on my help desk and Support Windows can take a full 1 minute to load.

  Information support:

  1. Running Vista Edition Home Premium on an Intel Centrino Duo Machine
  2. I recently installed Visual Studio 2010 and also set to upgrade to Office Enterprise 2007.  One of these programs installed "Microsoft help viewer 1.0" help initially would not display icons and images and I have patched the registry with a 'content help patch"for Vista available on the website of Ms.

  I guess I have to reinstall the installation of 'Help' for my machine, but I need advice please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2: Also try scan SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• Windows movie maker works slowly and cause of memory

  Operating system windows vista 64-bit

  Hello

  1. What is the size of the RAM?
  2. any changes made to your computer before the problem?

   
  Follow the steps mentioned below and check if the problem persists.
   
  Step 1:
  
  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135     
   
  Note: When you have completed the installation, follow step 7 in the article to start on normal startup.
   
  Step 2:
   
  In addition, check if there is a problem with the memory by following the steps described in the article.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

• new update of 38.0.1 makes the browser to run very slowly

  Hello

  After the upgradtion of 38.0.1 of today firefox browser responds very slowly. In case of seizure, it takes 3 to 4 seconds of delay for their display in the browser.

  Please take a look at this problem and solve the problem.
  looking forward to support yoru.
  thanking you,
  Mixon.

  firefoxusex said

  Hello

  After the upgradtion of 38.0.1 of today firefox browser responds very slowly. In case of seizure, it takes 3 to 4 seconds of delay for their display in the browser.

  Please take a look at this problem and solve the problem.
  looking forward to support yoru.
  thanking you,
  Mixon.

  32-bit or 64-bit Windows 7?

• BB Torch showed pointer for browser Field2

  Hello

  I use the field2 browser in my application to show HTML content. My application content watch HTML with the pointer on the 4.7 and 5.0 devices however on BB Torch(OS 6.0) displays the cursor to navigate HTML content. Why it is so?  What is extra that we have to make in the code for OS 6.0 devices or something to deliver in field2 browser in OS 6.0?

  Any idea?

  Problem solved!

  Solution:

  browserConfig.setProperty (BrowserFieldConfig.NAVIGATION_MODE, BrowserFieldConfig.NAVIGATION_MODE_POINTER);

• AT200 slow browsing after upgrade ICS

  Hello!

  After official successful upgrade from 3.x to 4.x (Ice Cream Sandwitch) everything works faster and smothly (applications open, moving through menus, typing...), but when I browse any web is extremely slowly. I have try it with different browsers (opera, dolphin, chrome,...) and same problem :-(

  Please I need help, any suggests? Anyone with the same issue?

  I read on the internet and find the same question on different manufacturers (Xoom, Galaxy Tab,..), also update from 3.x to 4.x

  Kind regards
  Francesc.

  I have exactly the same problem, it's so frustrating! I guess it's a common bug for tablets and keep checking for updates every day... I guess it's just a waiting game until there is a resolution. Has anyone tried to call Toshiba support?

• DeskJet 3755: Extremely slow printing, work stuck in the print queue

  Hey, I just bought a HP all-in-one Deskjet 3755 and put it in place and recorded. It is connected to my network, but I'm having a few problems.

  (1) the printer will only print jobs when it is connected to my computer by USB, even if I connected wireless.

  (2) print PDF print jobs EXTREMELY SLOWLY, over a minute for a page of text.

  Please do not just link me to support.hp.com pages... for some reason, they do not load on my computer (see the place completely empty, even if the HP site support work and charges).

  Thank you!!!

  Hey @anb9495,

  Welcome to the Forums of HP's Support.

  I see that you have some problems with the slowness of printing for the all-in-one printer Deskjet 3755. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to troubleshoot slow printing with your printer.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• private in youtube browsing still reveals the recommended sites

  Using the version of firefox on my Mac OS 42 and the use of private and not connected mode on youtube I saw a few specific sites such as planes, motorbikes etc...
  When I opened a new Youtube browser makes recommendations based on article I saw like airplanes and motorcycles. If I do not connect to youtube how was able to make recommendations on the points I've seen Youtube?

  If I open a new tab after closing the initial tab in this case. If I close and open a new Firefox window, that she will not return to the default youtube screen (no screen recommended).

  I guess it's normal the original tab open firefox window to maintain information previous tab in the same window of Firefox closed. When firefox is closed and reopened all the information be removed.

• How to fix a narrow strip along the right side that seems to be a copy of the right part of the browser, forcing me to right click buttons to use?

  I haven't downloaded or done something again, but today a narow Strip appeared along the right side of my window and forces me to click to the right of any button or scrollbar I want to use. Sometimes, this narrow strip is white, but it usually appears as a second window, with another bar visible, but unusable scroll.

  I saw two other reports of the present, and I'm not sure whether the previous users were able to resolve it, either by using our suggestion or in other ways. Please take a look at suggestions in these discussions:

  • Boring bar on the right side of my browser, makes text and things inside the fuzzy browser resolution, is it possible to fix this?
  • Not as wide as the window Firefox framework; location of the cursor on the pages.

  There must be some common element here...