FIFO.config - 61206: but the name of the FIFO is
Hallo,
I am relative new to cRIO and I became a mistake the last time, I've compiled my FPGA.
Description of HW
- cRIO-9035
- 4 x NI9229
Description of the software
- FPGA: I have 15 DMA FIFO (I can do this according to this document), which send asynchronous messages on each FIFO (see the joint photo)
- RT: I get this message and I store them in a PDM file
Problem
- FIFO. Configure or FIFO.start gives me "error-61206." This error, as shown here, means that there is no such thing as the name of the FIFO. But as pictured there. I don't know what happened. Is the first time I get an error like this.
For your impeccable support, I'll tell you ' thanks!
Carmine
I found the problem.
Only really used FIFOs on FPGA can be configured.
If you declare a FIFO and you won't use it on FPGA (for example to do a test of part of your project) you need to remove from code RT parts where you configure, start closed ancd FIFO.
Thank your for your attention.
Carmine
Tags: NI Hardware
Similar Questions
-
I think that Th 38 was the reason why my computer did not open at the total. Once that has been fixed, Thunderbird does not open more (error: XPCOM). After you have reinstalled Th 38 now I can open it and it looks good with the left pane, but the large window on the right is glued to that shows when you click on the name of the account (top folder in the left pane). None of the folders work, and none of the tabs on top of the page or the other. The only things that work are the links in the large window. I can see and open your messages by searching in the Inbox, for example. Would be grateful for any help!
Looks like the problem is solved! I was appalled when I saw how many emails I had stored and deleted a large number of them. Then after restarting the computer, everything seems to be back to normal! Praise be to God! Too, Firefox seems to be back to normal after that I did a cleaning.
Thanks anyway!
Greetings from AngieP -
This very annoying message what I select my site
You are about to log on the site "keiron.me.uk" with the user name "Gerry", but the site requires no authentication. Maybe it's attempt to deceive you.
It is ok with Internet Explorer
To resolve this problem, simply is to remove all bookmarks you have to keiron.me.uk and then re-create by vising the site by typing the address directly into the address bar.
If you want to manually fix it then, check the properties of the location of all bookmarks that you have for keiron.me.uk. It is probably similar to http://keiron:[email protected] remove the keiron:password @ section and the dialog box should not appear again.
-
What impression of recipes, photo prints, and the name, but the recipe does not print. I heard do that before, but not of Noah
Hello
OEM for the printer manufacturer is responsible for the proper functioning of the printer
and their drivers. Check with the printer manufacturer's support, their online
documentation and drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
================================================
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsSolve printer problems (Windows 7)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Open the printer (Windows 7) Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterDiagnose and automatically fix problems printing and printer (XP, Vista, Windows 7 &)
https://support.Microsoft.com/en-us/mats/printing_problems?WA=wsignin1.0Find the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers-------------------------------------------------------------------
Windows 8/8.1 - Fix printer problems
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Windows 8/8.1 - How to solve printing problems in Windows
http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problemsWindows 8/8.1 - install a printer
http://Windows.Microsoft.com/en-us/Windows-8/install-a-printerWindows 8/8.1 - set or change your default print
http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printerWindows 8/8.1 - device drivers - print & drivers
http://Windows.Microsoft.com/en-us/Windows/devices-drivers-help#hardware-drivers-help=Windows-8&V1H=win8tab3-------------------------------------------------------------------
Windows 10 - Fix printer problems<- printer="">
http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problemsSupported Windows 10
http://Windows.Microsoft.com/en-us/Windows-10/supportI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it=""> -
I deleted WIndows 8 for the score, but his name appears in the display to dual boot
I used Windows XP and Windows 8 for some time. I felt that I should remove Windows 8.je went to disk management and has deleted this partition and created a new partition. I also installed a new Windows 7 in this new partition. But the problem is that when I turn on the PC, the dual-boot screen. But it also seems the name of Windows 8 with Windows 7 and earlier version of the window.
I don't know why the name of Windows 8 is despite him being withdrawn.In addition to the information given by Liz above, Windows 8 is not listed in the boot.ini for Xp and Windows 7 does not use a boot.ini file. The best way to solve this problem is to start in Windows 7, then use EasyBCD to modify the boot options delete Windows 8.
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Why I get two files with different names but the same image when I save in 2015 CC Photoshop?
Why I get two files with different names but the same image when I save in 2015 CC Photoshop?
Try resetting the PS preferences - Preferences in Photoshop
~ Rohit
-
Hello
I am writing a script to create the new VM (base clone of a virtual machine) in a specific folder.
When you run the script, I get an error:
The specified parameter 'Rental' expects a single value, but your name criteria "PROD" corresponds to multiple values.
Some research led me to a post of 2011, which describes the same error. The only thing is, I can find no trace of open connection and then a more...
What I tried:
I run the script on the server for vSphere, so I closed the open vSphere client.
closing ('disconnect-viserver") all existing connections in the first line of the script-> an error because no connection is open.
In several places in the script, add the following lines:
ECHO ' - '.
$DefaultVIServers <-as noted in the post of 2011
ECHO ' - '.
This shows that no connection is open until I do the "connect-viserver", subsequently, apparently, that a connection is established.
the results and the (current) script are found in the files to attach.
I also found an error on the "set-PowerCLIConfiguration that I can't explain.
One last question... Is there a possibility to have the new virtual machine created through 3 hosts? the first on the first host, the second on the second, the third on the third, the fourth back on the first host,... and so on?
Any help would be appreciated.
Thank you.
Johan
Of course, you can provide the full path, for example see my post of folder by Path .
-
Anyone know how I can get the username of the current user? Not the name of the user, but the user name is connected to.
Thank you!
Only two variables that Captivate allows to work with are cpQuizInfoStudentName and cpQuizInfoStudentID, but the latter is only really designed to be used for the internal information server, not a typical SCORM LMS solution.
Sounds to me like you may need to get hands on with the services of a JavaScript programmer.
-
Everyone,
I'm trying to configure the WIndows server. I am running the following: Windows Server 2012 R2 Foundation.
I did the following:
1. I crossed the Config Wizard on domain Active Services and installed it.
2 then I joined the field. When I reboot the server, I get the following error:
A. "your computer seems to be configured correctly, but the unit or".
"resources (DNS server) is not responding.
A1. When I put a static IP address on DNS, I can't go to the Internet. Even if
I can go to the tank and the PING of the IP address and everything is good.
A2. The I change the DNS to get the IP address automatically. Then I can get to
the fine of the internet, but I still get the same message about a problem with the
DNS server.
Can someone guide me please what the issue is here? Thanks in advance.
3. Furthermore, I can't see the new server name/information when I go into Windows Explorer
as part of the network.
A. I'll go in Windows Explorer and see the other machines when I look at the network level. Yet,.
for the that set up simply, I can't find it, please help.
Thanks in advance.
Jerry
Hi Jerry,
I would like you to post your question in the forums TechNet for assistance:
https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
I hope this helps.
-
connected via WIFI, but the solution Center says printer 'not found '.
Hello, when I first set up the printer, my router is using DHCP and assigned IP address to the
printer has been 192.168.1.102. The range of IP addresses assigned by the router is 101-105. From time to time.
I had noticed, the DHCP server sometimes assign an other addresses in the range to the printer.
The printer is connected, the blue light on the front is solid, it is connected to the router successfully.
But the computer cannot print it, there is no link status monitor HP is concerned.
I thought that the printer should work with any address in the DHCP of the router range. I had to modify
the router config to always assign 192.168.1.102 to the printer now all works.
The printer is Photosmart D110. Is this the way you would expect?
Thank you very much for your answer, I'll keep the info as a reference.
I've never accessed the printer through the web browser / IP before.
In fact, I solved the problem in a different way. In my configuration of routers.
I could add it the printer (using the name of HP928B0E - the apparent hostame)
for the routers DHCP static table, so that the address 102 is always affected.
I think static DHCP is a kind of hybrid between DHCP and IP static, but always using DHCP,
but will affect only this address to the printer and not one of the other attached devices.
What it is, it works for me.
Enjoy - Dave
-
I am running VMware Player on a host Ubuntu 14.04, Win 7 pro x 64 comments. When I start the client OS VMWare gives me this warning
So I want to allow the use of the "reserved host RAM" option instead of playing with the pagefile, but setting told me to doesn't seem to exist in VMware Player
Is there something I can add to the VMX file to enable this option?
Porto Richardson wrote: this setting for VMware Player is found in the file config.ini to the player %allusersprofile%/VMware/VMware
The OP said "I'm under VMware Player on a Ubuntu 14.04 host" so the file name and path you mentioned is not applicable.
@LukeJS host on a Ubuntu (Linux) from the file name won't get the .ini extension and will be simply called the config and will be parked at/etc/vmware /. So with the machine virtual shutdown is not suspended and VMware Player closed then a Terminal used the following command.
sudo nano/etc/vmware/config
Then add the following line.
prefvmx.minVmMemPct = "100".
It is essentially the same parameter that gets the value of the UI of VMware Workstation preferences for submission in response to the message that despite the instructions contained in the message does not exist in the VMware Player preferences user interface.
-
confusion in Weblogic ReportsServer config without change the config?
confusion in Weblogic ReportsServer config without change the config?
My env
Windows 2008 64-bit
WLS 10.3.5 64bits
pfrd forms/States 11.1.1.4 64bits
------------------------------------------------------------------------------------------------------
After all the Install and config my forms and reports
the default report server I found
http://WLOG:8090 / reports/rwservlet/getserverinfo
had a name
RptSvr_myserverhost_Formsreportsinstan,
I ran my forms and reports with RP2RRO. RP2RRO_RUN_PRODUCT
----------------------------------------------------------------------------------------------------
now, some time later, I found, that the name of reportsServer is changed to
rep_wls_reports_myserverhost_formsreportsinstance_1
and I don't know, why?
------------------------------------------------------------------------------------------------------
I start the WLS_REPORT by using the oracle scripts using startManagedWebLogic.cmd
In the Console of administration of WLS here I see that many of the WLS_REPORTS server startup
and after putting the nomserveurrapports in my forms the servername 'new '.
I can start my forms with reports
-------------------------------------------------------------------------------------------------------------
In Enterprise Manager 11g under the reports tree there are three entries:
ReportsTools
Reports (11.1.1.2.0) (WLS_REPORTS)
RptSvr_myserverhost_Formsreportsinstan (the 'old' reportserver, which is not started and is not available)
-----------------------------------------------------------------------------------------------------------
on the server in
C:\Oracle\Middleware\asinst_1\reports\server
There are two entrances:
rep_wls_reports_wlog_formsreportsinstance_1.dat
and
RptSvr_myserverhost_Formsreportsinstan.dat
----------------------------------------------------------------------------------------------------------
and in
C:\Oracle\Middleware\asinst_1\reports\
is located in the reports_install.properties file:
..
Server_name = rep_wls_reports_wlog_formsreportsinstance_1
ORACLE_INSTANCE_NAME = Formsreportsinstance_1
INPROCESS_SERVER_NAME = rep_wls_reports_wlog_formsreportsinstance_1
-------------------------------------------------------------------------------------------------------------
what I've done, that may be the reason for the moment to have two inputs for reportsserver?
In the last days, I worked to create the windowsservices
to start the WLS_AdminServer and start the WLS_FORMS / WLS_REPORTS
ManagedServer
and I changed the IP - address of the WLS - ServerHost, (and vice versa)
but na not to create a new ore ReportServer anything!
What can I do to resolve this confusion?Hello
11 g, there are 2 servers for reports that are created by default:
-rep_wls_reports_myserverhost_formsreportsinstance_1
The server reports "in-process". WLS_REPORTS must be started, and you can start this 'in progress' report server simply by calling a URL of type: http://application-tier server: port/reports/rwservlet/getserverinfo or using the menu on the site of EM
-RptSvr_myserverhost_Formsreportsinstan,
The stand-alone reporting server. You can start using the command opmnctl or using the menu on the site of EM
Concerning
-
How to use the same services-config for servers the and remote.
My flex project works very well using the bottom but when I download my flash on the server I do not work, all the files and related paths are the same execpt remote is a linux server.
<? XML version = "1.0" encoding = "UTF-8"? >
<>services-config
< services >
< id = 'amfphp-flashremoting-service' service
Class = "Flex.Messaging.services.RemotingService"
messageTypes = "flex.messaging.messages.RemotingMessage' >"
< destination id = "amfphp" >
<>channels
< Ref channel = "my-amfphp" / >
< / channels >
Properties of <>
< source > * < / source >
< / properties >
< / destination >
< / service >
< / services >
<>channels
< channel-definition id = "my-amfphp" class = "mx.messaging.channels.AMFChannel" >
" < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "
< / channel-definition >
< / channels >
< / services-config >I think the problem is the line
" < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "but I don't know how to use the same services-config for servers the and remote.
I'll back up a bit.
Breakpoint URLS are defined as follows in the services - config.xml:
https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure
The meaning of each of the tokens is clearer when we see them as part of a complete url. If your context root is set to http://localhost , then I have no idea how your application runs in any environment.
If you leave the server.name and server.port chips in your configuration file, then they will be replaced when executing according to the location from which your application is served. However, the context.root token is replaced at the time of the compilation based on the value that you specify in Flex Builder or when calling mxmlc.
In order to reuse your file services - config.xml, you must use the same context-root on your development environment and to your deployment environment.
-
WHEN I click ON TOOLS/OPTIONS IT DOES NOT OPEN! HE SAID about: preferences BUT the OPEND SITE IS EMPTY WHY?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
What's new on: preferences page has replaced the previously used stand-alone Options/preferences window.
You can enable/disable browser.preferences.inContent false on the topic: page config to restore the autonomous Options/preferences window you had in previous versions of Firefox.
You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.
Maybe you are looking for
-
What happened to the Red effort zone in FF9?
After the installation of FF9, the little box at the end of the address bar which turned red when something on a loading site is part or at least blush more. I use Win 7 Home premium 64-bit.
-
How to weld the buttom only? Help me please
my version of ultiboard is 10,0,144
-
When I tried to run defrag manually it will run for hours and does not complete
-
scammed by windows service center
I have just been scammed by the so-called Windows Service Center. I stupidly that they have control of my computer by remote access, and then when they started asking for money to fix it, I said I could not payt eh $300 they then said that I could do
-
BlackBerry smartphones can somebody help me please ~ ~ ~
First off, I want to say thanks to anyone who takes the time to even post a reply. I'm new to blackberry, well I've had my blackberry for a little over a month now. The problem is that when I open google to search for something sometimes my results a