Fighting the problem of Audio Equalizer

Similar Questions

• How not to solve the problem of audio device?

  I have this message when I try to play a music cd... Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.

  1. http://support.microsoft.com/kb/307918/en-gb

  How to troubleshoot sound problems in Windows XP

  2. http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows

  This tutorial is designed to help you identify and solve its current problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

• How to get the setting of audio equalizer - Acer Aspire 3970 - Windows 8

  Hello

  I have a set of Altec Lansing speakers hung on the sound board. Its a speaker setup nice for the money - but the sub has a higher than low normal output level and do not have a bass level button. In any case, after installing Windows 8 Pro I've only the standard options for enhancements such as bass boost and room correction etc. There is nothing for the taste of an equailizer everywhere are. Living in an apartment and not wanting to annoy people, I am eager to find some drivers who will give me an equalizer to play with. Neighbors of downstairs must hate me...

  Can anyone suggest how I could go about this? The only driver Acer offer here for Windows 8 are to do with TV tuners.

  Google results  <----Check these="">

  If a program specifies win - 7, but not 8 (on your box of victory-8) all run from the table rather than the metro interface. I haven't had a problem of compatibility.

• No audio audio on computer. Fix Center indicates the problem, my audio doesn't work does not sound and manufacturer-both required

  I have an acer CPU. I might delete something that caused audio does not run correctly, but not sound. Speakers are plugged.

  Install the audio for the brand device drivers and the computer audio device model you have.

  (Without device drivers, the operating system has no idea how to talk to the audio device * and * vice versa.)  We can speak English, the other Swahili.  If no member of the House can translate, then you get just a lot of weird looks.)

• Problems with Firefox 13. Cannot see the drive of audio files online. Video only works on some sites. Everything works OK or update Flash. No change

  The problems started when Firefox updated 13. tried to download the latest version of Flash 11.2.202.235. No change.

  Video works sometimes on YouTube, not at all on most of the other sites.

  Audio player not working do not at all. Not yet visible or Real Player downloads against playing within the application like Amazon.

  Tried to turn Add ons to find the culprit. No luck.

  Just as there should be in Internet Explorer.

  On my WordPress site has MP3 audio files and uses a flashplayer to view and play music files. With flash player on, nothing appears, (Bank space where audio player would normally displayed)

  If I turn off the flash of the shock wave, a text link that Downloads MP3 in a new window (quick player), also video does not work on any Web site. If I turn off the Flash and quicktime, text link to downloads of audio file in realplayer.

  Thank you. I uninstalled Flash 11.3 and installed the old version, 10.3. Everything works fine now. I don't know if it is a problem of Mozilla or Adobe, but it seems strange that either would such a problem of incompatibility to exist.

• Problem with the keyboard and audio on Satellite L40

  Hello world
  I just installed XP SP2 on my Satellite L40 (BTW thanks to all of you who helped me overcome the problems during this operation with your son), but I have a problem with my keyboard. I have a QWERTY keyboard and after I installed xp, he worked as a qwerty, I fixed it, now all my letters are working very well, but I have some problems with certain symbols, such as @,., _, if you understand me.

  Could someone help me?

  I also have problems with my audio, in fact I have no sound at all, in the Panel, he said that there is no audio device found.
  I've seen a few threads which said that I should first install kb888111 and another thing is likely, but I can't find the other. I downloaded the audio driver from the toshiba Web site; Thank you for helping me in this area also.

  Good bye

  I have the same problem with the sound... I found hotfix kb888111 and I instaled this one... but when I tried to start installing driver sound a window popup say thet there is an error and cannot continue with the installation driver...
  I found hotfix kb888111 in this file that i have downloaded from the toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2...
  I don't know what to do... Someone else knows...

• With media player, I get audio but no video. What is the problem?

  Whether it's a wvm file or not, I get a black screen with audio only.

  Hi newbewon1

  1. you try to play a WMV file?
  2. what operating system is installed on the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  For resolution, please refer to the procedure below and identify what codec was used to compress the file. You must install the codec even on the computer to read the file. There is no absolute way to do that, but here are your best options:

  ·          To determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the Audio codec and Video codec sections.

  ·          Use a non-Microsoft codec identification tool. Many are available on the Internet.

  So you can check if the installation using the correct codec solve you the problem. You can use your favorite search engine to download and install the codec. Refer to the below help links -.

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  http://www.Microsoft.com/downloads/en/default.aspx

  http://support.Microsoft.com/kb/316992

  NOTE- Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope this helps.

• Problem with the playback of audio books

  Hi, I wonder if anyone can help please I have a problem of reading audio books on my rocket.  The problem occurs when I download audio books from my local library; the library allow it, are aware it will be downloaded to an MP3 player and no permit is required.  Most of the books are multi frame for example from 1 to 10.  I have download all 10 parts of my rocket.  Parts 1 & 2 always play without problem. When I try to play other parts 3, 4 etc. they will not play and I get a message saying: 'you can get the license by transferring the title to the device using software audiobook.  No license is required and he plays parts 1 and 2 with success.  I tried to download only 1 & 2, they play, then delete 1 & 2 and 3 & 4 download, they will not play and I get the same message.  In parts 1 and 2 of any book, I download play, the rest of the parts will not and the message above.  In the past, I managed to download books and had no problems.  I would be grateful for any help please?  Thank you.

  Thanks to this solution of sugested.  I now have the issue resloved, namely that I don't have my camera "MPT" the value of the parameters of the USB, it has been updated the 'MASTER '.  I made the change deleted audio books that are not open, downloaded again and now all THE game pieces.  I have this post (1) to say thank you and (2) in case it helps someone else.

• error message: "no audio output device is installed" I have no sound - how to rectify the problem please?

  reinstall audio devices-error message: "no audio output device is installed" I have no sound - how to rectify the problem please? tried most of the quick fix ideas, but nothing seems to work

  Hi Jammyhorse,

  1. What is the number of brand and model of the PC?

  2. when the problem started?

  3. you remember to make changes to the computer before this problem?

  Step 1:

  You can check the following link and run the Fixit and see if helps solve the problem.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/NO_SOUND/

  Also check out the link:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Step 2:

  In the BIOS settings advanced, you can also check if the onboard sound is enabled.

  You can see the manual of the system manufacturer or contact the system manufacturer for more information on how to make the changes in the BIOS.

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem reading Audio of WMP11 after you increase the playback speed.

  Original title: problem reading Audio of WMP11

  I'm using Windows Vista 32-bit with Windows Media Player 11. After awhile, my music sounds like it is blurred. Specifically, sometimes while I increase the playback speed. This happens on 2 different computers, so I excluded a possible card problem.

  EDIT: I forgot to mention, all the parameters are normal, and all the improvements to my device are disabled.

  Make sure that disable all improvements is checked, as suggested at http://windows.microsoft.com/en-US/windows-vista/How-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it . Tim Baets
  http://www.BM-productions.TK

• Headphone Jack, not to let the two devices at the same time - work Realtek problem - Dell Audio is unusable

  A copy of my post TomsHardware, where no one was trying to help:

  "To begin with, no thread any where online have solved my problem. My problem in the simplest possible terms:

  -J' bought a Razer right headphone, it does not work when it is connected.

  -J' spent the next 4 hours of downloading, re - download, install, uninstall and reinstall the Realtek drivers, because everybody says I had allow a setting or a related subcontractors as struggling separate devices or something, and I do not have the Realtek HD GUI; at least, I don't think so...

  - Then I discovered that Dell has decided to replace GUI from Realtek with "Dell Audio", which had two options, one of them being that it should even display settings or not.

  -J' took a few steps in Dell Community site and spent the Realtek driver with the Microsoft driver, and that got the headset to work.

  -My headset works fine, but the microphone is not yet detected.

  What I have relevance: right Razer headphones + microphone detachable; Dell Inspiron 15 w / only, audio unified; each unique Realtek and Microsoft audio driver compatible with Windows 8.1.

  What I don't have: the Realtek audio Manager.

  What I wish I had not: Audio from Dell.

  Someone please help me on this, because I have just fired over $100 for it, and I intend to use it for professional players and podcasting; no microphone is not cut it.

  Sorry if I look really angry at the moment, but I think we've all been there...

  Thank you. »

  The main issue: there is a definition of Realtek Audio Dell only exists to ban, I need to change that. I need to configure it to allow two different devices to use in the same decision, and Audio Dell replaced Realtek GUI with its own, which is pretty... Pretty useless. The two parameters, as there, one of them is "Show advanced settings", so congratulations to anyone who decided to do this monstrosity.

  EveryNameWasTaken

  Every post that I found online said that the Realtek HD GUI is the way to go

  Since you can't have the DD Realtek Audio Manager in a Dell, one wonders how they determined it was the answer.

  EveryNameWasTaken

  I just need a way to access

  My question is how to get all these other people. I think that probably they were not talking Dell laptops and their solution applies to some other manufacturers products.

  EveryNameWasTaken

  Please provide another way to separate input devices that are entered into the same outlet

  A headset devices are already separated in the properties. A helmet is an input device, microphone, which can be set as the default device in the properties (Control Panel > sound > recording tab > micro). It is for the internal microphone until an external microphone is connected. The other part of the headset, the headset is governed by sounds > playback > speakers. Who controls the speakers until the headphones or external speakers are connected.

  EveryNameWasTaken

  Inspiron 15 3542

  Thank you. I wanted to know because a couple of the Realtek drivers have a problem with the headphones or the part headphones headphones. Headphones are recognized by their impedance detection and I think that some of the drivers have their settings come down a little, or too narrow. None of the Realtek for the Inspiron 3542 versions are known to be bad for me, but if you get audio in the headphones using the native driver but not as the pass of the Realtek driver then I feel that the fault is with the Realtek driver. You can see all the drivers that comes from Dell for your model in the Inspiron 15 3542 html page. There is audio for Win7, 8.1 and 10 pilots. "WB" means 8.1 and 'WT' 10. I think that there are 2 of each. Try the two for any operating system you have. (If you have10 which, in itself, could be the problem - other people have said they have started the headphone problems when they installed 10) You should not try to install an older version of the driver on a newer version. First remove the newest one in the control panel.

  EveryNameWasTaken

  It befuddles me that Dell would give us a different GUI that has so few options

  I don't know if Dell Realtek & made that choice for technical reasons or something. I think that some of the laptops did not have the Realtek Manager when Dell has started using Realtek as a supplier, but that changed. Of course no one is happy to have fewer options, but yours is the first post, I've seen that reported to the mic. Many other posters have been unhappy, because Dell's Audio Manager does not provide a way to separately control the volume of the headset which is a problem because they can be much too strong, but the real Realtek Manager has an option to display ' phones as a separate device from the speakers.

  EveryNameWasTaken

  I did not buy a $100 laptop, I bought the headphones for $100

  I thought that you had purchased a used laptop. Some of the older 15 Inspiron are probably pretty cheap now.

  EveryNameWasTaken

  -A system restore will not change anything

  I run a retrieval system to remove windows or configuration problems, but that's just me.

  EveryNameWasTaken

  decision does not have a headphone and microphone with any device I checked

  If the plug does not work with any headphone it either because of the Realtek driver fails detecting the defective hardware or it. You should report to technical support if you have an extended warranty.

  EveryNameWasTaken

  "and I used an adapter USB jack to try my usual Microsoft LifeChat headset).

  Is an adapter USB jack of the same thing that the USB input audio in my previous screenshot? A usb plug avoids the problems of the Realtek combo decision-making because the USB does not use Realtek hardware or driver from Realtek. Headset LifeChat know either, but if they are a usb headset while they should work. USB audio devices are as separate sound cards - each device contains its own audio codec, even the small usb Jack. If a device usb audio does not work, it has nothing to do with the hardware, driver or Realtek Manager.

  EveryNameWasTaken

  Another laptop, an HP G62 old without a grip combo under Windows 7 Ultimate, could run them all very well

  You me lost there. The headphones you have tried in the Inspiron have a single plug for a headset jack (4 segments - TAKING), that looks like this?

  

  and you connected to a microphone jack on a laptop with the separate mic Sockets & normal headset?

  EveryNameWasTaken

  each response that I get from either Razer themselves or now these forums was condescending.

  Your two posts today have assumptions that make it difficult to formulate a convincing answer, but I I don't think I'm condescending. I try to avoid the annoyances that we see in so many forums. However, they are your feelings and you have a right to them.

  When I said to forget taking combo, I wasn't brushing off the problem, while recognizing that these mic combo jack issues are difficult, in large part because we can't use the native driver to test the Realtek driver, so we can't easily determine if it is a driver or a hardware problem. It is much simpler to use usb audio, but as I said I don't know what are the special features are required for your purposes of pod casting.

• Problem with the driver for Audio device high definition

  I have a Windows 7, 64-bit, Studio 1558. When I started the computer about a week ago, I was a message that the Service Notification of system events cannot connect. I checked the event log and found error 7022, where it says that the audio device was suspended. After some research and experimentation, I made the error go away by turning off the (Microsoft) High Definition Audio Device Driver, Version 6.1.7601.17514. However, now I have no sound. I tried updating the audio driver for my computer (IDT 92HD73C1 Audio, v.6.10.0.6267, A18), but this doesn't seem to work, and now I returned to a previous restore point to go back to square one. I'm not sure what caused the problem. Some said similar positions that he was leaving headphones plugged to power off the computer. others said that the use of cmd-> "netsh winsock reset" would solve the problem (of least temporarily). Any of these seemed to help me. Basically all I want to do is to install a sound device driver that works. I hope someone can point me in the right direction to do so. Thanks for any help provided.

  DellRaiser

  I tried updating the audio driver for my computer (IDT 92HD73C1 Audio, v.6.10.0.6267, A18), but this doesn't seem to work, and now I returned to a previous restore point to go back to square one.

  I can't say that if you were not able to install the driver IDT or if you installed but got the same error message.

  If the first case, try to download one of the files directly from the ftp server of DellIDT.

  If the latter, if you get the same symptoms with the IDT pilot and the native Windows (high definition Audio Device) driver so it is difficult to see the drivers as the cause of the problem, because it is rare that two drivers have the same failure at the same time. Here's how to switch between the 2 pilots:

  1. open Device Manager (type devmgmt.msc in the start search box and press ENTER) and right click on IDT High Definition Audio Codec.
  2 Select this option to "Update driver software".
  3. click on "Browse my computer for driver software".
  4. click on "Let Me pick from a list of drivers on my computer".
  5. put the "Show compatible hardware" check box if not already checked.
  6. in the list of devices, click on 'High Definition Audio'.
  7. click on "next".
  8. in the update driver warning box, click 'Yes' (the driver).
  9 restart the portable computer if you are prompted. If not invited, so no need to restart.

  To reverse the process, change the names in steps 1 and 6.

• The ADMA00 interface driver has a problem; No audio or the sound of the computer

  * Original title: no sound in Windows 7

  device of reading levels ok but no sound. problem ADMA00 driver interface has a problem. its supposed to be fixed. I have no sound

  Hello

  Please contact Microsoft Community.

  I understand that you are faced with the question on the sound.

  I will definitely help you with this.

  Please provide the information below.

  1. What is the exact error message you are getting?

  2. don't you make changes to the pc before that?

  3. how many time you are faced with this?

  I suggest you go through the below methods:

  Method 1: Try running the Sound Troubleshooter:

  1. Press Windows + R key.

  2. Type command and press ENTER.

  3. Click on troubleshooting.

  4. In the left pane, click View all.

  5. In the list, double-click the audio playback and run the troubleshooter.

  Method 2: Try the clean boot:

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Also check out the link below and check if it helps:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• Message to the computer startup «failed to start the audio driver of Dolby.» Please restart your computer or reinstall the driver if the problem persists ".

  Original title - help help help me please

  why I opened my computer it appears a message that "failed to start the audio driver of Dolby. Please restart your computer or reinstall the driver if the problem persists ". and I could not open Windows media player. What should I do now? who can help me please?

  Hello

  Go Device Manager... Sound, video and game controllers, and see if you have triangles yellow error next to your audio devices...

  My guess would be that you need to update the drivers for your audio devices.

  You should be able to find the drivers + Support Web site for your computer model...

  If not, find the number\model Audio chip and watch there chip manufacturers website for updates...

  I don't know if the audio problem is a single chip, or is part of your graphics device...

  If you don't find anything wrong in the audio, you can check that.

• Audio missing part of the element in Adobe Premiere Pro CS6, don't know what the problem is. Help?

  I use Adobe Premiere Pro CS6 on a MacBook Air. (I use an external hard drive for files and the project, don't worry). I'm editing an average movie film I already filmed and stored on my hard drive, however the audio is missing part of a clip when I open it in the program. When I play the original video in QuickTime format, the sound is fine. In Premiere Pro, the audio works at the beginning of the clip, then it just suddenly stops at a certain point and does not return. It stops at the same place everytime I play it. I tried to open Bars and tones, and I hear the tone very well. I tried to look at the audio mixer Panel, and nothing is cut or a smaller volume. I double checked to see if the clip is on and it is indeed turned on. As far as I know, there is no other clips blocking audio somehow. I tried to cut the video with the razor tool to see if he wanted to kickstart audio feedback, still nothing. I tried to change the name of the video. MTS of. AVI (tip, I found online), no change. I have really no idea what is the problem, or why the audio is missing. And I don't understand why it affects only part of the clip. The clip is around 10 - ish minutes and audio works for about the first ten seconds, then stops. He's a longer video which is about 20 minutes in the length, clip, that I'm getting is the last half of the video.

  If someone could help me with this, I would really appreciate it. It's for my graduation project and it is due in like a month, so I'm a bit required for the moment. If you have any other questions, please send them!

  I can't really give you a reason happens, but I can offer you some options to work around him.

  Open the item in Adobe Media Encoder and export it as a WAV file. See if the Audio is finished. If so, put that in first and make a subelement with the original video file.

  Again, NO idea why this might happen, but rather that why worry... Let's see if we can get your finished project.

  Good luck!