File Explorer has stopped working properly from the taskbar

Similar Questions

• Internet Explore has stopped working - question of the biometric authentication service

  My Elitebook 8540p has developed a problem where I get the error message - Internet Explorer has stopped working... Turn it back on.     I am running Windows 7 32 bit.   And using IE9.

  After some internet reading, I started my services of neutralization.    I finally got down to a service that is causing the problem.

  Biometric Authentication Service Digital Persona Inc.

  When I disable the service in the services of the MSconfig System Configuration and reboot, I use internet explore without any problem.    (I've identified some Web pages which would agrivate the question.)

  The deactivation of the Service of Authenticaton of Biomitric causes the scanner to not work.     I tried to reload the driver for fingerprint reader, and the HP Protect tools Security Manager.

  Any idea how I can activate the biometric authentication Service and not IE stopped working the issue?

  j1bissig

  I had the same problem on my HP Pavilion dv7 and had the chance of getting a solution.

  I, too, put the finger on biometric authentication as the problem Service.  By disabling the service, Internet Explorer worked well; except, now, I had no finger analysis feature.  I installed the latest version and it worked for a few sessions and then the problem comes back.

  Looking at my updates, I realized that the Flash is set to update at the same time, the problem started.  I tested by activating the biometric authentication Service.  Instead, I disabled the Flash add-on in Internet Explorer and it did not work again; except, now, I had no Flash.

  Searching online, I came across this post from Adobe:

  Post on the Adobe Forum: IE9, Windows 7 64-bit Flash causes "Internet Explorer has stopped working".

  I followed the instructions in this post, including the "clean install" and reverted to version 10.3 of Flash.

  Post on the Adobe Forum: how to return to a previous version of Flash Player?

  Now, all the features work correctly.

  I hope this helps!

• Façade has stopped working properly on the Qosmio X 300/305

  Greetings and thanks for reading,

  I had my computer not a week ago and since then, I had some problems, especially with a blue screen when I hit the FN key. Research on the problem, I disabled services of Toshiba and eventually found the culprit: hwsetup.exe. Manual execution crashed my computer and it still doesn't work. However, after you install a new version of it, it seems that FN is working fine now. Hwsetup running always breaks the computer well.
  Any ideas what may cause this? The computer is new, so I don't see what I could have done to cause this situation myself.

  Now to the following problem: it seems that the façade has stopped working correctly, the touch of the keys that allow you to launch the application Dolby, the webcam application and also turn on and off the red lights on the keyboard. When I click on the touch keys, all I get is the tone of the speakers, but nothing happens. I guess I have disabled something by mistake. Any thoughts?

  I would be grateful any entry immensely, people, so please share your theories with me. It is such a thin laptop and I can sleep now, it's difficult to to cause these problems... ridiculous, Yes, but I want everything to be perfect because I spent so much money.

  Best regards
  Johan

  Hello

  > I can't install the flash card value as well as the utility driver package. It's actually the cause of the blue FN screens. I'm really lost here.
  First of all, you should check if the BIOS version you are using is the most recent.
  If this isn't the case, update the BIOS.
  Then, you must install the utility to Support Flash Cards because this utility is necessary, to get other utility Toshiba works.

  Then install the added value package because it contains the Driver TOSHIBA components common that is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  It also contains the TOSHIBA Flash Cards tool that provides Hotkey function and function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.

  If the BSOD will always appear that it is advisable to recover the operating system

• The search in Windows Explorer has stopped working properly - it does not find the files which are there, but will find other files that match the search criteria

  Window 7

  Was working before, but have only allowed a number of updates to Windows that had been blocked for a while.

  For example. Type 'safe' in the search box. It finds files and directories with 'security' in the title, but not the files and directories that I can see are there with 'safe' in the title.

  When I search using the "safe * ' it seems to do exactly the same thing as"safe ".  It does not show only files beginning with 'safe'

  My suggestion was not ' safe * ' but ' name of the file: ~ safe * "(without the quotes).

• I opened the game client for life despite the installation of the game has stopped working properly and the game closes that I said?

  I opened the game client for life despite the installation of the game stopped correctly and the game closes that I said?

  Hello

  What operating system do you use?

  I suggest you to follow the links and check out them.

  Method 1:

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Even with safe mode Windows 7 error "Windows Explorer has stopped working". Screen is blank with only the specified cursor.

  Using Win 7 Home 64 bit:
  After the connection, I get "Windows Explorer has stopped working" its InPageError says in details
  Auto check solution online does not come to the top with a solution
  the screen is black nothing happens.

  I opened in safe mode, same problem.

  the only thing I can do is ctrl/alt/del and open Task Manager. When I tried to open the new task... Task Manager stopped working

  Request of guid, how to solve this problem. The problem started last night.

  The laptop is Lenovo G550
  Operating system: Win 7 64-bit service pack 1 - home edition

  I can email a screenshot is necessary for the InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  OS Version:6.1.7601.2.1.0.768.3
  Locale ID: 1033
  More information 1:c785
  More information 2:c785ae48d9bd3e84e80fe64557c132ac
  Information additional 03:58 d 5
  More information 4:58d5c6fbf156506f476a5bd1fc86cfbf

  Hello

  This problem may be due to one of the following problems:

  • You are using an outdated or corrupted video driver
  • System files on your PC can be damaged or do not correspond with other files
  • You may have an infection of viruses or malware on your PC
  • Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working

  Try the following steps:

  Method 1:

  Try the steps of error: Windows Explorer has stopped working

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Important: the data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.

  Note:

  Ignore them perform a upgrade in Place the link above.

  Also ignore the safe mode and clean boot.

  Method 2:

  We will try to start the computer in mode low resolution and check the status of the issue.

  Low resolution starts Windows using your current video driver, and using the parameters of frequency low resolution and refresh. You can use this mode to reset your display settings.

  Refer to the section:

  Turn on the video resolution (640 × 480)

  You can also check: why is my screen black when I start Windows 7?

  Registry warning: the following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article:

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  It will be useful.

• WD external drive - "internet explore has stopped working".

  Hello

  I have a WD external drive.  I bought it 2-3 years ago and it works perfectly until a few months ago.  My computer is using Windows Vista.  The problem is that, although the external drive is detected when I open a pop up window appears indicating that Windows Explorer has stopped working. Then the window closes. I tried to update the software, I have uninstalled and installed back but the same problem still exists.
  Anyone know what I can do?
  Thanks in advance

  Check the drive on another computer, if the problem is the same, try using another cable or hard drive case. If this is not the case, see the link below, if it helps:

  The Explorer has stopped working Vista error
  http://www.streetmusician.co.UK/explorerstoppedworking/

• "Windows Explorer has stopped working" / "restart windows" but after the reboot, the impossible to open my files. __

  Please how do l open my folders that l find dificult to find the required information.

  Hi Sabrina Awuah Aning

  (1) since when are you facing this problem?

  (2) when exactly it happens?

  Looks like the thread you are referring has been moved or merged.

  Method 1: Run the fixit available in the links below and check if that makes a difference

  Diagnose and repair Windows files and folders problems automatically

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  Method 2: You can follow the steps described in the article below, which deals with a similar question

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".

  http://support.Microsoft.com/kb/937093

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error "Windows explore has stopped working" when you open the file in my documents

  Original title: opening a file in the folder my documents

  Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?

  Hi dalintn,

  1. What is the file format of the document?

  2. are you able to open documents from other locations?

  3. did you of recent changes on the computer?

  Check if the similar problem persists when you access the document from any other location on the computer.

  Method 1

  This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2

  If the previous step fails then I would suggest that you do clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Explorer has stopped working, trying to open the video files

  No matter what program I open video files in I get "Windows Explorer has stopped working" before I can even open videos is not question, what type, program, video file corresponding to this error occurs, I tried WMP11, media player classic homecinema & Media Player VLC, how do I prevent this, I get a bit bored my video files because this error guard prevents me to open one of them

  First to perform a clean boot like diana D asked! because there may be several services running the background to avoid the evil funtion windows

• "Away from the taskbar" taskbar and Explorer has stopped working

  There is a bug with the taskbar. Here's a video: www.youtube.com/watch?v=qGDVjj93oKA

  I did a disk cleanup to delete all the thumbs and other things. I also reset some things to clear the messy icons (leave a tutorial to another question on this site). Once I clicked on a program that was not in the taskbar (because I removed it some time ago) and he said "Unpin the taskbar." Although it wasn't there, I clicked and it I got a message saying that the Explorer has stopped working. Is there something else with the register or the temporary data file that I need to reset? I'm not the average user. Can you help me please?

  News of the computer: http://prntscr.com/5pqovk

  More information: http://prntscr.com/5pqp54

  I've already updated my computer completely. I have not installed the virus because I have AVG and I also use Sandboxie and Virtualbox.

  Edit:

• Weird black/window box after commissioning; "Explorer has stopped working". Error messages; Do not click on some things in the start menu; several McAfee icons in the lower sidebar...

  Where oh where can I start?  When I start the computer, my office is always in the background, but there is a pop up looking for black box thing.  There are no long enough for me to read what it says.  Something about system/Windows32 (not full title), then past to something else, even once too fast to read, disappears.  Then a window that says;

  • Online: 223
  • Char: 2
  • Error: 1% is not not valid Win32 SENSITIVITY
  • Code: 0
  • URL: file:///C:/Program%20files/PeoplePC/ISP3700/HTA/station.brt

  There is an option to run a 'this page with a script' or something to that effect.  If I choose Yes or no is not serious.

  Under this window is another

  "Runtime error!"

  Program:C:\ProgramFilesCyberLink\PowerDVDDXL\PDVPDXSrv.exe

  Application has requested the execution in an unusual way.

  On my sidebar on the right low in McAfee Ms red with white background icons, many of them until I sweep (no click) with the cursor.  They will disappear after the scanning, but then return.

  When I click on Explorer or the window will Flash quickly on and outside, or should I get the message "Windows Explorer has stopped working".

  I can get on explore if I disable all add-ons.  But it won't let me check yahoo IND. e-mail messages.

  When I try to go to things in the start menu that look like we can help him, I'll either get the error messages or off quick flashes of a window.  When I went into Control Panel, nothing happens when I click on the icons.

  When I went into the System Configuration. then click on services there are things that say that they are arrested.

  In its responses, please explain things as you explain to a 60 year old grandmother.

  Hello Halima S,.

  Thank you for your response.  I was checking things until I found your answer.  Do not be alerted via hotmail.  Somewhere in my files McAfee "View Log" I found that I was 'ping '.  What is crazy?  In the files for seven times in a row from 09:30-09:34 "SystemGuards have allowed a moment change on your computer."  Should I try to mess with this before that I have use the above tips or try your advice first?

  Ping, means that your mcafee dat files are up-to-date and also it cannot be updated no more. so try to update your antivrius manually by downlading latest mcafee dat files and also try runing mcafee!

  Take a look at this:

  http://community.McAfee.com/message/91863

• From time to time I get an error message pop up saying "Windows Explorer has stopped working"

  Original title: Windows Explorer

  Occasionally I get a pop-up box saying "Windows Explorer has stopped working" another "Windows Explorer restarts? -for example. Control Panel - change background. What can I do?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Message "Windows Explorer has stopped working" after the opening of the "Images".

  Hello.
  I have Windows Vista 32 - bit home basic OS with SP2.
  When I open "Images", I get a message saying "Windows Explorer has stopped working" with an option to restart the program, which just closes. The details of the message are:

  Signature of the problem:
  Problem event name: InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Information additional 01:40 d 4
  More information 2: 4062ad41ec8067256aa4c5e2b56d3c79
  Information additional 03:40 d 4
  Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c7

  This error message comes just out of nowhere I do not install anything or make updates when this issue was raised. I tried to restart the computer, but it did not help.

  I checked for viruses, but none came.

  Then, I tried to do system restore, but it could not solve the problem.

  In addition, I used the command line to find the problem and found a few corrupted files, it has been unable to remedy.

  Details of SFC are:

  «2010-11-17 11:38:44, Member's file Info CSI 00000160 [SR] cannot repair [01:24 {12}] "settings.ini" in the sidebar of Microsoft Windows, Version 6.0.6002.18005, pA = Process_Architecture_Intel <0>...» »
  and there is more like that, but I don't know how to copy and paste these messages.

  I don't know what to do from here.

  I don't want to reinstall all of Vista. In addition, Vista is PREINSTALLED on my computer.

  Oh and I am not an expert in using the command prompt,-j' found how to do this in other forums.

  Please help on how to solve this problem.

  Thank you!

  Hello

  Norton search spyware however your question may be caused by or to the less aggravated
  by Norton.

  Norton/Symantec is known to cause strange problems and aggravate others. Better is to uninstall
  for a test by simply disabling will still allow pieces of it to install. Uninstall it and run the Norton
  Removal tool to avoid problems causing leftovers being left behind. The following recommendations
  to use when testing, even better all the time.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Norton Removal Tool
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Explorer has stopped working error - I can't right click a folder on the desktop.

  This is my brother's computer, and they do not arrive in his account, only mine.  I have administrator rights, but it seems not to matter. This problem occurs only occasionally.  For example, I can right click on this text, copy it, then paste it.  However, if I go to the desktop and try right click on a folder to rename it, I get the error.  The error indicates that Windows Explorer has stopped working, when it says that it restarts, then the Office updates really quick. None of what I found in the forums have worked again this is why I started a new thread.  I think it might be a problem with the registry, then someone can please help me quickly find a solution?

  Note: I can not run as administrator command prompt because I can't right click, so I can't run sfc/scannow.

  We are volunteers here for the most part.

  It's a shame that we don't know anything about the distressed system but it was MS Answers owners have chosen to implement this community - do not ask basic system information when a new question is asked that make problems a lot time and frustrating.

  But now they way they choose to turn things around here.

  Maybe this will help you with your system of unspecified of brand and model with the release of unspecified Windows and Service Pack and unspecified install antivirus/antimalware:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.  You can also see some errors of NAT (DEP, Data Execution Prevention).  DEP errors are reported when XP will be threatened by a program and Windows stops threatening program.  Windows should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.

  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:
  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly.  Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display.
  Choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.

  Click on the header of column called Microsoft (it can be the way out of the right side of the screen) to sort the display (by clicking on the column heading in Microsoft) so all non Microsoft extensions are at the top and easy to see.  They will say 'No' and be marked in pink because they are not extensions Microsoft, something like this:

  

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  If you see extensions which do not have anything that is listed under Description, Version, product name, company or have special names that looks like they might be letters and numbers just randomly, you might want to look at these first.

  You can also Google the name of a suspect add-on and see if there is any success on the Explorer accidents or mistakes DEP and what other people have done about it.

  You can Google something like:

  Windows Explorer crash

  You must complete your suspect on behalf of adds on.

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition (right click).  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.  You can always enable it later, so keep track of things by writing them down.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, then restart and test again to be sure.   You have disabled the last extension would be suspicious.

  You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.

  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list!