File ' found shdocvw.dll (unable to locate component)

Similar Questions

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Error: mmc.exe - Unable to locate component. This application has failed to start because apphelp.dll was not found.

  Original title: this application has failed to start because apphelp.dll was not found.

  A window titled "mmc.exe - Unable to locate component" in the title bar, which includes the message:

  "This application has failed to start because apphelp.dll was not found.  Reinstalling the application may fix this problem. »

  that appears when you access many of the 'administration tools' in the start menu.  e.g. component, computer, event viewer Management Services, etc.

  I'm afraid I accidentally deleted apphelp.dll when cleaning on other files.  I found copies of apphelp.dll in following two tracks.

  AppHelp.dll C:\WINDOWS\$NtServicePackUninstall$ 124KO Extension Application 09/08/2004

  AppHelp.dll C:\WINDOWS\ServicePackFiles\i386 123KO Application Extension 04/13/2008

  I tried Recuva, but he could not find the file.

  How to re - install a such apphelp.dll suggested by the pop - up error message window?

  Thank you

  I thought it would be something that began with "A".

  For low overhead and free, think of Microsoft Security Essentials (MSE).

  MSE and a regularly good scan with the definitions updates using MBAM and SAS (from post above) should keep you in good shape according to your Internet habits.

• Explorer.exe Unable to locate component, this applicationfailed start because BROWSEUI.dll was not found, can access windows taskbar or white screen homepage

  Tried the boot failure, etc, but not good, were not the original windows disks

  Duplicate thread:

  URL: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/browseuidll-was-not-found/7ef0bd88-ec8f-4a5a-bde2-43d0f94cab03

  Title: BROWSEUI.dll was not found

  Details:

  I use Windows Vista Basic (build 6002 sevice pack 2) as widows try to open I get the message, cannot start Windows (explorer.exe Unable to locate component) then a message (this applicationfailed start because BROWSEUI.dll was not found, reinstall the hotfix applicationmay) it's folled by a message (windows explore stopped working) I'm then left with a blank screen bar none tasks or a desk top, the only way to access the internet is through the Manager tasks, but I have no access to windows

  Hi, AlanWalker1885,

  FYI: A moderator will pass this thread to the appropriate forum.  The post belonged in the Internet Explorer forum.  Please take note of the drop-down menus when you click on the link below.  Thank you.

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_xp

  Do you have any friends who might copy the file browseui.dll from their Windows XP CD to a flash drive?

  Have you tried to register browseui.dll?

  1. At the command prompt, place you in the %Windir%\System32 folder.
  2. Type regsvr32 browseui.dll/u, and then press ENTER.
  3. Type regsvr32 browseui.dll, and then press ENTER.
  4. Restart the computer

  See the solution given here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/error-message-browseuidll-file-is-not-a-valid/04b33b18-d87c-40AE-BE35-71720dbbbab2

• Win SAT.exe Unable to locate component MSVCR100.dll was not found

  I get error when you try to use REFREASH NOW in control of Panel\Performance information and tools is when the error # Win SAT.exe Unable to locate component MSVCR100.dll is not found appears. I guess that I need this file can someone please HELP me thank YOU

  Hello

  Were there any changes made to your computer before this problem?

  Perform the steps mentioned below and check if that helps:

  Method 1: SFC scanner on the computer to ensure that the system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Follow the steps proposed by O of Marilyn and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-program-cant-start-because-msvcr100dll-is/5c9d301a-2191-4EDB-916e-5e4958558090

  I hope this helps.

• c0000135 Unable to locate component because rpcrt4.dll was not found.

  Hello

  I installed an antivirus program. Today, I tried to start my laptop and restart every time. I discovered that the error isc0000135 Unable to locate component because rpcrt4.dll was not found .

  I think that the antivirus has perhaps quarantined this .dll file. I have searched the Internet and found ways to solve it, but the problem is that I can't even get into my office in Mode safe.

  He cannot start somehow.

  Someone said to repair using the Windows XP CD, but my laptop is not the CD player.

  EDIT: Ok, so now I found on Acer eRecovery Management.

  He has the ability to restore the operating system. But the prob is now that I don't have enough space for the operation back up my files. There is an option to completely reformat, but I don't want that.

  I'm helpless now.

  Any help will be greatly appreciated.

  Hi kaixas,

  If you are not able to start the computer in normal mode or in Safe Mode, I don't know how you would back up your information.

  If you have no way to start the computer and no way to start the computer with the XP disc, you don't maybe not another option that recovery of the system.

  If you back up your information, you can ask a friend if they have an external hard drive orjump drive to save your backup on that connects via the USB port.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• "mwlDaemon.exe - Unable to locate component. Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem.

  Vista message mwlDaemon.exe error
  At the start of Vista, I get the message "mwlDaemon.exe. - unable to locate component Application has failed to start because sysenv.dll was not found. Reinstalling may correct the problem"Question is how should I do this? Most programs work OK, but I think the problem might be preventing a backup is made.

  Hi Thegardener,

  ·         How long have you been faced with this problem?

  ·         You did changes to the computer before the show?

  Follow the steps below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  Method 2: If the method above is not enough, you can try to uninstall and reinstall the application.

  You can see the article for more information about the uninstall of a program.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information helps.

• STOP: c0000135 {Unable to locate component} __This application failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  I have a problem with my laptop which comes to hang. Bluie screen.
  the screen show:
  STOP: c0000135 {Unable to locate component}
  This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

  In my opinion, is due when I have T.V. Media installed on your computer. I try to use the safe mode and select disable it the automatic restart on system failure option and press ENTER. But nothing works. I have all the time the blue screen with winserv wasn't written. I try to have access to have access to safe mode or something to download, because I try to download criticism 885523 update that I download on a USB key.

  Please this drive crazy me I need your help

  You receive a "Stop: c0000135" and "winsrv was not found" error message after you install Windows XP Service Pack 2

  http://support.Microsoft.com/kb/885523

  S.Sengupta Media Center MVP

• TPSMain.exe - Unable to locate component

  Whenever I start my computer, the following error message appears TPSMain.exe - Unable to locate component-
  This application has failed to start because TPwrReg.dll is not found. Re-installing the application may fix this problem.

  Nobody knows what it means and what I can do about it.
  Help, please

  Hello

  tpsmain.exe is a process associated with Toshiba laptops. He manages the power save function to ensure that the system goes to a power saving mode when it is not used.
  I would recommend to eliminate energy saver completely from the BONE by using Add and remove the option programs in the control panel. Then try again to install this Toshiba utility again. You can use this software to the tools & utility Cd or you will check the download page to Toshiba for latest updates

• STOP: c0000135 {Unable to locate component} __This application has failed to start. Reinstalling the application may fix this problem

  Hello

  We use Windows XP Professional. A user reported that machine has been suspended. Then it restarted the machine. It stops after WINDOWS LOGO & before the login screen.

  I received STOP: error c0000135 {Unable to locate component}. I copied the file kernel32.dll in recvery console mode. There is no work.

  Also repaired OS by using the Windows XP CD did not work.

  Kind regards
  Carter S

  Hello Thomas,.

  Thank you for visiting the Microsoft answers community.

  Take a look at this KB article.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• apdproxy.exe - Unable to locate component

  Start a box opens about five times faster that you can close the box that has the following words;

  apdproxy.exe - unable to locate component

  This application has failed to start because AocCache.dll (and in the next box AdobeQt.dll) could not be found.  Re-installing the application may fix the problem.

  In addition, I'm unable to open Adobe Photoshop Album Starter Edition 3.2.

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 01:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 02:

  I also suggest you to uninstall and reinstall Adobe Photoshop Album Starter Edition 3.2

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

• After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

  Original title: screen saver does not start because MSVCR100.dll was not found

  After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

  ScreenSaver: Photo screensaver.scr - unable to locate component.

  This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

  The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

  Help, please. Thank you.

  Hello

  It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

  But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

• vSphere CLI - perl.exe - Unable to locate component

  Hello

  I installed the vSphere 4.1 CLI on Windows Server 2003 SP2 (x 32) and when I try to connect using the vicfg - nas.pl it gives error below. W2K3 x 32-bit is supported according to the vSphere CLI document. I don't know where he's going wrong then.

  
  Perl.exe - Unable to locate component

  This application has failed to start because libxml2.dll is not found. Reinstalling the application may fix this problem.

  
  Any suggetions would be appreciated.

  Thank you

  Installation of Perl is not in the Path environment variable. To the Path environment variable, add the following location:

  I think that the installation of Perl is not in the Path environment variable.

  C:\Program VMware VI CLI\Perl\bin remote

  -Right click on my computer
  -Select properties in the context menu
  -Select advanced system settings
  -Click the Environment Variables button
  -Select the path in the System Variables and click on change
  -Add the following line «;» "C:\Program VMware VI remote CLI\Perl\bin" to the Path variable

  Restart the command prompt for the path access is taken into account

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility