File is in use message

Similar Questions

• Print file stuck in the coil, the message "unable to copy the name of the file: it is used by another person or program".

  Recently, I tried to capture a job by a break of a print queue, print work and copy the files from the spool (under C:\WINDOWS\system32\spool\PRINTERS) before unpausing the queue. However, when I try to copy the files, I get the error message "unable to copy the name of the file: it is used by another person or program". I tried several times with the same result. The only way to get the file off the ground is obviously t reactivate the print queue and they will quickly deteleted shortly after. Is there a way I can recover these files? Assume the change the port in 'File' to make a copy of file is on the table. I ran this in the title of administrator user rights.

  The file you are trying to "capture" you will do some good.  However, if you want to watch or copy it, first stop the print spooler.  Open the Services applet (start > run > services.msc > OK).  Scroll down to "Print spooler" and click "Stop".  Don't forget to restart the print spooler after you copy the file or you will not be able to print.

  

  If you want to print to a file rather than on paper, there are at least three ways to do it (not counting "Print to a file").

  Using the "Print to file" box will produce a *.prn file.  It contains commands specific to the printer; It cannot be opened by the usual word processor applications; It can be used to print to the printer selected in the print dialog box or printer that uses the same commands to the printer.  For example, you have a printer installed on 1 computer but you have physically moved the printer to computer 2, where it is now installed.  You can check the "Print to file" on the computer 1, save the file to a flash drive *.prn, carry it to computer 2 and then print it out by copying the file to the printer (in a command prompt window).

  1. the best way, IMO, is to print to a PDF using free CutePDF Writer.

  2. you can create a "generic, only the text" printer and select this option when you print.  This produces a *.txt file.  To install the generic/text printer only, follow these steps:

  1. Click the Start button, point to settings, and then click Printers.
  2. Double-click the add printer icon.
  3. Click the next button.
  4. When you are prompted "How is this printer attached to your computer? Click the local printer option button, and then click Next.
  5. In the manufacturers box, click Generic. In the Printers box, click generic/text only, and then click Next.
  6. In the available Ports box, click FILE, and then click Next.
  7. When you are prompted "do you want that your Windows-based programs to use this printer as the default printer?" click the no option button, and then click Next.
  8. When you are guests "would you like to print a test page?" click the no option button, and then click the Finish button.

  3. use the Microsoft XPS Document Writer, which may already be installed on your computer.  "XPS" was Microsoft's attempt to compete with Adobe PDF.  He did not.  Unfortunately, the only way to view a document produced by the XPS Document Writer is using the Microsoft XPS Viewer.

• After doing a HP-assisted recovery, when I click on Windows Update, I get a message saying "files required to use Windows Update are longer registered or installed on your computer.

  I am unable to open Windows Update Express option, when you click on Express, I get a message saying that "files required to use windows update are longer registered or installed on your computer." I tried both options following the message, with no luck at all. Belarc says that the 125 Microsoft updates are missing. I have Windows XP Home Edition sp2 disk. Suggestions, please.

  If xp is always saved, then try to open the internet options settings,

  view of objects, search for & R.click on the WU & MU active x objects

  (one at a time), select "update", they are part of windows update

  Active x, necessary for updates... Express update could be among them

  Moreover, however it is not a part of windows...

• Error message "Files required to use Windows Update are longer registered or installed on your computer."

  "Files required to use Windows Update are longer registered or installed on your computer" is the message stop & updated. I owned the computer for more than 7 years & used XP all the time. Why does the update fail / stop now? What should I do to get it working?

  Hi B_Tan,

  Please take a look at the following information previously published by TaurArian:

  Some have reported that simply re-register the MSXML3. DLL seems to fix the problem.
  1. click on start.
  2. choose Execute.
  3. in the run box, type: regsvr32 MSXML3. DLL
  Press OK

  If this did not help, you may be re-recorded some files more:

  1. click on start.
  2. choose Execute.
  3. in the run box, type (pressing well after each one): -.

  net stop wuauserv

  Repeat the following:
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 wuaueng1.dll
  regsvr32 c:\windows\system32\dllcache\wucltui.dll
  regsvr32 wuweb.dll
  Regsvr32 MSXML3.dll
  regsvr32 qmgr.dll
  regsvr32 qmgrprxy.dll
  regsvr32 jscript.dll

  net start wuauserv

  FYI -.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  I hope this helps!

• Error message: the files required to use Microsoft Update are longer registered or installed on your computer.

  As I never had problems with Microsoft Updates in the 3 years that I've owned this computer, I am confused now what has happenned.

  My laptop has a valid copy of Windows XP Professional and has always already been updated successfully, both manually by using the web page for the custom updates and so automatically.

  Can someone please shed some light on the question and how to fix it?  I obviously don't want to need to format this computer.

  I still regularly ran my anti-virus (N360 which is always updated) software and windows defender.  I have also always used Spybot S & D.  None of the mentioned software found no major problems, as I expect, because they are supposed to prevent intrusions. I also run the current Microsoft malicious software removal tool as an extra precaution.

  My problem is:

  After you perform a system restore to an earlier date on my laptop, I wanted to check windows update to make sure that all my security updates are in and up to date.  I opened the page to update as normal, then I accept the license agreement and I continued to the next screen.  Normally, I don't have to do this, he usually directly goes to the page.

  Then, I got this error message:

  The files required to use Microsoft Update are longer registered or installed on your computer.
  
  It is possible for me to choose
   "register or reinstall the files now (recommended)".
  However when I try this option I'm headed to the next web page where I get another error message:

  403-Forbidden: access is denied. You don't have permission to view this directory or page using the credentials you supplied.

  Could be a problem of hijackware but first see this archived thread WinXP general newsgroup: http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/4789b22822070e68/ee1886e36b8d6608?#ee1886e36b8d6608

  QED: Have you installed an update to wireless card that had been offered by Windows Update, the other day? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Train Simulator of original disc installation - file already in use error messages.

  I try to install Train Simulator (Vista), I get an error message: files already in use, cannot be installed. I had it installed on my computer before, but I had to wipe my HD and do a complete restore on my computer.

  Hi Dave35,

  What is the full error message that you receive?

  Method 1:

  (a) copy the contents of the disc to install the game and save it to the desktop

  (b) try to install the game as an administrator do a right click on the installation program files and select run as administrator, click on continue if you are prompted to confirm.

  Method 2:  Select the boot and then try to install the game

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message "could not complete your request because the file appears to be a model of camera that is n

  I can't open the RAW files from my Nikon D800 (i.e. NEF files).  I use a Mac with Photoshop CS5 and El Capitan 10.11.2 version running.  I get a message that "could not complete your request because the file appears to be a model of camera that is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for more information. "Yet the Nikon D800 is on the list of supported devices.  Can anyone help?

  And temporarily disable the Gatekeeper by allowing downloads from anywhere, or your installer will be marked as 'damaged' because that CS5 is out before Gatekeeper and is not "signed" that is not approved.

  

• How to upgrade my Adobe Acrobat 9 Pro? Got this message on an adobe document: this file seems to use a new format that this version of Acrobat is not supported. It can not open or display correctly. Adobe recommends that you upgrade to the last verse

  How to upgrade my Adobe Acrobat 9 Pro? Got this message on an adobe document: this file seems to use a new format that this version of Acrobat is not supported. It can not open or display correctly. Adobe recommends that you upgrade to the latest version of our Acrobat products.

  Basically, you spend money and buy the last version, which I think is a product of cloud...  Acrobat cc - Plans and prices | Adobe Acrobat DC

• I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  I use a mac and when I try to save a file I get this message.   Unable to save the image.  Do not have enough access privileges. -5000

  local disk, I think he was trying to save it in the templates folder.  I changed it to save it on my counter top and it worked.  Rookie mistake.  This had to be the problem.

  Thank you

• You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  You use Mac OSX 10.7.5, when you try to open a PDF file, I get a message "an internal error has occurred." I uninstalled and reinstalled both Adobe 10 and 11. Anyone know of the problem and the solution?

  Hi Charles,

  
  

  It is specific to a particular file or all the files that you are trying to open, gives you the error.

  How you open the same file using Preview on Mac.

  
  

  Thank you

  Vikrantt Singh
  

• When you use Internet Explorer, cannot save a PDF file.  Adobe Acrobat message "the document could not be saved.  Access denied"may be logged when you use the Google browser.

  When you use the browser Internet Explorer, PDF files saved cannont.  Message from Adobe Acrobat: "document not saved County. Access denied.  Same PDF can be saved when you use Google.

  Hello

  I use Adobe Acrobat 11.0.10 - Windows 7 - Office 2013 - Internet Explorer 11.  Compatibility according to the link is OK.

  Thank you

• Can't empty trash - error that the file is in use

  I noticed a recent bug that seems to be the case with PDFs, I opened in preview. When I close the file (cmd + w), but not to leave the program overview and then remove the file, when I go to empty the trash, I get an error message that the operation cannot be completed because the file is always used. I am only able to empty the trash immediately after a restart. I wonder if there is a way to fix this error!

  Thank you!

  Hulahooop,

  Right-click on the file in the trash, then select 'delete immediately... '. »

  

• Re - install the software for the printer C6280 all in one... get a "file not found" error message

  you need to reinstall the software for the printer c6280 all-in-one. Downloaded the last installation on HP web site package. During the installation process I get an error message... Unable to find user/appdata/local/temp/7z256315/setup/...setup/blocksysuser...

  the 7z256315 folder does not exist on the hard disk.

  I also have a message that it cannot find PS_A10_02_software.msi.

  Windows 7, C6280 printer all-in-one. Printer is connected to the router. The desktop computer is connected via an ethernet cable, the laptop/ipad/iphone/internet radio are connected via the wireless to the router.

  I hope you can help

  Thank you

  Charlie

  Hi cberistain,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77039-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 3645097 & sw_lang=.

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print and scan?

• Cannot delete a file:"FILE IS in USE BY ANOTHER PROGRAM"

  I try to delete a file and get the message
  'File is used by another person or program ".

  The file has been around for several weeks.  I rebooted several times.
  I always get the message.

  Is it possible to get rid of this file?

  • Unlocker:
    http://download.CNET.com/Unlocker/3000-2248_4-10493998.html

  Bruce Hagen MS - MVP [Mail]

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true