file on sd card

I have a file I want to copy it to an SD card, what should I do?

If you do not have a location on your computer to SD cards, you need a SD reader. Google for them. They are cheap. After that, it works like a flash drive. Plug it into a USB port and you simply drag the file on the SD card in the new drive. Bruce Hagen
MS - MVP October 1, 2004 ~ September 30, 2010
Imperial Beach, CA

Tags: Windows

Similar Questions

  • Error code: 0x8007045D when transferring files to the card reader.

    Original title: Error code: 0x8007045D

    Error code: 0x8007045D when transferring files to the card reader. Lost files. Running Windows 7.

    Hi Bernard Major,.

    1 did you change the permission for the files you are trying to copy?

    2. What place you are trying to copy the files?

    3. are you able to copy the same files on another computer?

    You can try to copy files to another location on the computer and check.

    Step 1:

    I recommend you to check if you have enough permission on the card reader to transfer files.

    See the link to apply authorization:

    What to know before applying permissions to a file or folder

    http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

    Step 2:

    If you're still having problems, then run Check disk to repair the bad sectors.

    a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

    b. Type X: (for the card reader drive letter) and press enter

    c. at the command prompt, type chkdsk /f and then press ENTER.

    Now, type chkdsk/r

    Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area. You can save the data on the disk before you perform a checkdisk.

    For more information, refer to the article below.

    Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

    http://support.Microsoft.com/kb/952272

    Note: This article remains valid for Windows 7 also.

    I also suggest you to check this problem with another USB plug.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Files from SD card

    I can't delete files from the card.  I works fine, I see and open my files, but delete is not an option when I right click on a file.  How can I remove them?

    The game, October 8, 2015 23:19:45 + 0000, jvoitl wrote:

    I can't delete files from the card.  I works fine, I see and open my files, but delete is not an option when I right click on a file.  How can I remove them?

    Files have the read-only attribute. If so, remove the
    attribute. See
    http://www.Dummies.com/how-to/content/how-to-change-the-readonly-attribute-on-files-and-.html

  • Problem with the system of files and media card renaming of files...

    HIII guys.

    I m, development of application in which I have to rename the file to media card so I use the FileConnection API.

    but it gives me exception error in file system and the same code works fine for the files of memory device.

    I m confused abt it... Is there any setting for media card access... ???.

    code snippet

    fconn = (FileConnection) Connector.open (file:///SDCard/BlackBerry/pictures/2.jpg, Connector.READ_WRITE);
                           
               
    If (fconn.exists ())
    {
    System.out.println ("" + fconn.canRead () + fconn.canWrite ());
    fconn. Rename ("1.jpg");
    fconn. Close();
    Returns true;
    }

    fconn.canRead () returns to me true

    fconn.canWrite () returns me true.

    help me guys...

    Thanks in advance...

    JDE 4.2.1

    Device Simulator-8100

    HIII

    I finally found it...

    My mistake of not closing the files input stream each so it locks...

    Thnks for help...

  • Read a file from SD card

    I have problems to read a file from SD card. I watched EmbeddedMediaDemo sample and I changed the line:

    InputStream is = getClass().getResourceAsStream("/media/BlackBerry.mp4");
    InputStream is = getClass().getResourceAsStream("/SDCard/BlackBerry/videos/VID00019.3GP");

    "' and I get the message:" flow Eception exception: null ".

    I also tried so:

    InputStream is = getClass().getResourceAsStream("file:///SDCard/BlackBerry/videos/VID00019.3GP");

    but same problem

    I try to include VID00019.3GP in the proj, then use this line:

    InputStream is = getClass().getResourceAsStream("/media/VID00019.3GP");

    It works.

    Please urgent help.

    Thank you

    Passing the uri is the easiest way.  You can open an input stream of the file using the FileConnection system:

    InputStream inputStream = null;
    FileConnection fileConnection = (FileConnection) Connector.open( "file:///SDCard/BlackBerry/videos/VID00019.3GP");
    if (fileConnection.exists()) {
        inputStream = fconn.openInputStream();
    }
    
  • Save the file on SD card

    Hello

    I am trying to save the file on SD card

              String url = "file:///SDCard/text.txt"          FileConnection conn = (FileConnection) Connector.open(url);      OutputStream out = conn.openOutputStream();   // unreachable code      out.close();      conn.close();
    

    But when I run it on a simulator (BB 8300) I took net.rim.device.api.io.file.FileIOException.

    Is to create for me file on SD card.

    FileConnection fc = (FileConnection)
    Connector.open(System.getProperty("file:///SDCard/"+"test.txt"),Connector.READ_WRITE);
    if(!fc.exists())
      fc.create();
      OutputStream os =fc.openOutputStream();
      os.write("Your Data");
      os.close();
      fc.close();
    
  • lost the external drive, catalogues on the correct main computer, I have the original files on cf card how to connect the news catalogue replaced images?

    Hey I lost an external hard drive with a lot of work on this subject, the catologs are on the main computer, in the image files... when I go on the external hard drive icon I get previews and selects so im assuming that this info is on the main computer... So I cf cards original for a lot of this stuff... is it possible to connect them so that I don't need to re - edit four years of stuff... I'm using a mac osx 10.9.5 his lightroom 5... any ideas?

    As I said earlier, you copy the files to the card from the camera to the new external drive with the HELP of YOUR OPERATING SYSTEM. This isn't an action of Lightroom. Files are in the same exact files than before on the old external hard drive.

  • Recently, I buy a Sony camera a6000.  I am currently using 2.5 Lightroon.  When I tried to load my raw files from a card reader to Lightroom, but failed as Lightroom could not read images.  Can anyone help?  Thank you, Eric

    Recently, I buy a Sony camera a6000.  I am currently using 2.5 Lightroon.  When I tried to load my raw files from a card reader to Lightroom, but failed as Lightroom could not read images.  Can anyone help?  Thank you, Eric

    Upgrade, or -.

    Convert raw DNG images using the Adobe DNG Converter program free of charge your Sony raw images. Then import the DNG versions in Lightroom.

    "Adobe DNG Converter" is not part of Lightroom (or Photoshop), but a separate (standalone).

    You "run" program, select the folder of images from Sony, select a folder for the output DNG files.

    Using Photoshop | Digital Negative (DNG)

  • linked file not found if I delete or move a file to another card

    "The linked file XXXX not found. "Choose replace to select another file or don't know not to change the link.

    IT seems that every time that I move the file from one card to another, or in overtime I remove I remove a picture from a file.

    What can I do?

    TNKS

    Robert@a @.

    This is what happens:

    1. you have a linked with illustrator file or the pictures in

    2. you save the file as an Illustrator PDF

    3. you move or delete one or more related images

    4. you open Illustrator PDF in illustrator and it asks you to replace any missing linked files

    ?

    I don't see how you could think that this is not normal. There is a link to your file to a particular file path, and you move or delete it. Illustrator then asks what you want to do about replacement.

  • Nikon D800 taken with Sandisk extreme raw files more 32 GB SDHC card was corrupted. Able to preview in the library of Lightroom4.4, but not able to import or transfer the files from the card to the computer. Any ideas on how to save the library in Lig win

    Hi, I shot a few photos December 31 night mode RAW Nikon D800 and extreme as well as Sandisk card SDHC 32 GB. Looks like the card got some errors of memory so not able to transfer the files from the card to the computer. However, I am able to view the photos through Lightroom ver 4.4 library, but when I tried to import them, it gives me an error message indicating this file cannot be read.

    Is it possible to save the photos to the "library window" in lightroom overcoming the card read errors?

    Thanks in advance

    If you see the photos in the library module, the photos are already imported. If I there are thumbnails in the import dialog box, that means the jpg display embedded in the Raws are ok, although the raw data itself is corrupted.

    You may be able to save the jpgs shipped with this: Instant RAW JPEG

  • Camileo H10 does not write the files to SD card

    Hello

    I bought a Camileo H10 in December. It's a nice cam, but sometimes I record video in HD format, the file will not be stored on the SD card.

    I tried a class 8 GB 2 and one of 16 GB class 6 SD card. This problem strongly deformed, when I record a video not the first time in the life cycle.

    Another problem is, on the videos, the audio stream is fast. When audio is played, the images run 10% longer than the audio.

    Someone knows, there is a firmware update?

    Thank you

    Stefan

    > sometimes I record video in HD format, the file will not be stored on the SD card.
    First of all you must check if the SD card is not locked SD card supports a lock that you could not format the SD card or store something on this map.
    In addition you should take a look in the user manual and need to check what SD cards are supported!

    > Another problem is on the videos, the audio stream is to fast. When audio is played, the images run 10% longer than the audio. Someone knows, there is a firmware update?

    Why you need a firmware update? Don't you think that it is a firmware issue?
    I think that this has nothing to do with the firmware or a cam problem.
    My father has a HD cam and this issue appeared also with video recording high definition.
    The problem is that your video needs to be converted and you have the right codec

  • Camileo S10 - Arcsoft doesn't recognize not all files on SD card and internal memory

    I just bought a Camileo s10 camcoder.
    So far, I was pleased with the product until I connected it to my pc (vista compatible with recommendations).

    I installed the Arcsoft software, but I've never had any file import because * the program recognized the sd and internal memory as void * (I could read the files in the drive of the camera, as well as my pc card reader).

    I have used other similar suites with no luck. Then I tried to format sd hc 8 GB card and restore my files but unfortunately I noticed * video/foto files not recognized at the time, even from the camera *.

    Another concern is that I had a trailer (720 p) hd .mov file in my memory card and the camera could not see (+ I wanted to use the camcorder as a player HD plugged into my sony full hd tv +).

    I looked for answers almost anywhere, but so far I have had no response

    Hello nikfam,

    I also have a S10 Camielo, installed the software Arcsoft on Windows Vista and I am able to see images and mov files if I connect the cam via usb cable or if I insert the sd card into the card reader.
    He shows me the internal memory and the data stored on the card (Class6) 8 GB SDHC.

    Maybe you need a card with a higher class. Where did you try to format the sd card? On the inside of the camera or on your pc?
    Please take a look at the right format.

    Have you tried another usb port? If you use a hub, check that there is enough power.
    I downloaded both trailers 720 p and saved on my sd card but my S10 couldn t see too.

    welcome them

  • Qosmio G20-110 with Vista-> cannot transfer files to SD card

    Hello

    I created Vista on this machine by following the instructions of Francisco Jr. Everything works fine except

    1. I can't transfer files on a SD card. I get the following error:
    «Error 0 x 80070079 semaphore time out...» »

    2. He reformatted not either. If I try to format it, I get the following error:
    "Windows could not format the drive.
    The Toshiba SD Memory Format utility would not work either.

    The same problems occur if I insert a Memory Stick. Does anyone have an idea how to solve this problem? I noticed some people on the forum with a similar problem toshiba Satellite:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25227&MessageID=95150??

    The strange thing is, I can not read the card no problem, copy her okay and even delete files it contains. But I can't transfer files to it and I can't format it. The card works fine in other laptops with internal SD disks. In addition, it works fine if I plug an external drive in the Qosmio. Under XP it was no problem. I tried to reinstall Vista, reinstall the drivers supplied by Francisco Jr. and ran windows update several times. But I still get the same problem.

    Looks like a problem with Vista not being able to communicate properly with the SD Qosmio player. Would appreciate any help on this.

    See you soon.

    Post edited by: Nitro155

    Hello

    As you probably know not all cards are supported and can be used!
    In of the Qosmio G20 unit user manual you should find information what cards argues the Qosmio G20card player!
    Please check this box.

    Regarding your card problem SD;

    Well, I read that you also a message in another thread.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25227

    And regarding the declaration, you can read data from SD cards. But it seems that you can not always copy or remove the data from the SD card.

    Well, the SD card should normally pay a locking function. If the card is locked you can only read but you will not be able to remove something from the card or you will not be able to format the card.
    I think you should check this switch!

  • How do I transfer files to SD card on Acer Iconia A1-830

    I don't know how to transfer files from my PC or my memory internal to my SD card... Any entries you'd gladly. I've just updated my device to 4.4.2... last Thank you Acer!

    Hi thanks Ace for entries... I just connect my Tablet PC and voila I was able to transfer all of my kids to the sd card folder... i can't figured it using File Manager are, so I decided to connect to the desktop... your contribution was appreciated even if...

  • Cannot find files on sd card mp3

    said to post this here...

    Hi I have an e280 v1 and love, have had very few probs with it.

    I just put audio books on the sd card and it's not finding them. I have others there and is finding those so he found the card. I checked and they have the ex .mp3 file, so I don't see why. Gender was a little screwed up, but I fixed that.

    Any other ideas why do not find them?

    What is the USB Mode (under settings) on the Sansa?

    It's Auto Detect, he goes to MTP mode if it finds any Windows Media Player 10 or 11, mode MSC (plain USB) if it isn't. XP has WMP 9 so that the files can have exceeded by MSC. Vista has 10 or 11, so it's move to PSG. The Sansa should see all of the files anyway, but maybe it's not.

    In any case, go to the MSC, no automatic detection. Then, Vista should see both drives. Then try to send the books even more.

  • Hidden files on SD card

    have files on a 4 GB memory card. When I plug to one of my computers, no files are found. However, in my digital camera it recognizes them... I did a disk scan software download and it found the files but wants me $40 to load... How can I find them myself? Thank you!

    Its seems to be the precise card also that both computers read my other cards without any problems.

    Look on the side of the SD card. There is a little switch that toggles between open and read-only. It is in the wrong position.
     
     

Maybe you are looking for

  • How to get the "SETTINGS" at the time I opened FIREFOX?

    I clicked on SETTINGS and asked a white page. I want the back page that has ' HISTORY, DOWNLOADS, etc. when I open FIREFOX.»

  • graphics card that works in the office of h500s

    Installed graphics card NVidia GeForce 210 1 GB and beautiful work (small size without fan). Remove and replace one of the by the smallest low profile. By using the VGA/d-Sub connection. After that error was to go into the BIOS and checked/changed th

  • When trying to install XP sp3 receive error message "access denied."

    @meisj0n: to avoid confusion, please start a new thread about your specific problem and your computer.  Indicate your IE version and the full version of Windows (for example, WinXP SP1;) Windows XP 64 - bit SP2) in your first post.  Thank you. ~ Robe

  • How can I know what is my server? http? etc.

    I tried to put a picture of my granddaughter, and he wants me to save a file. But I need to know what is my server to send to this file?

  • Need help with activation of Windows XP.

    Original title: xp will not load properly I tried to re - install windows xp on my hp mini computer with the windows xp disc gave me when I bought my hp mini. However, when the computer prompted me to enter the activation code of microsoft xp I refus