File operation

Hello

I find difficulty in the following issue,

When I'm in a file operation using the method of Queuing for a loop to another loop, I get the previous values measured at the beginning of the file. To remove it, I blush every time in the queue, but the problem remains so please suggest an idea. I use the binary as well as the worksheet for more explanations for the measurement value recording, and when I go to my data analysis using the saving data the problem persists.

So please help me and if you need more information or clarification of the problem please let me know.

I'm looking forward for the solution.

Thanks in advance...

Hi Sam,

1. get queue, and the queue of output in both loop?

You can close the queue wait either in a loop in the loop of the consumer or the producer.

2 loop synchronization is necessary.

3. indicator of error to get the queue queue / recessed.

4 put force destroy real on the output queue function

Now in my opinion if you use the function flush queue at the beginning on any program this problem should not be triggered because the queue is already at the same level. It's a strange behavior because I develop a dummy VI and try to run code similar to yours and his works fine for me.

Tags: NI Software

Similar Questions

  • Invalid file operation

    Hello world

    I need to recover a file from the operating system using an Oracle procedure. To do this. All I need is to try to use a different file name and capture that in a table of newspaper (to test the object).

    Currently, when I run my procedure by incorrect filename it throws an error "invalid file Operation.

    Is it possible, where my procedure will not throw this error and instead it will run the procedure and the paper in the table of my error is "bad file name" or something like that.

    in any case I found it. I used this:

    INVALID_FILE_OPERATION EXCEPTION;

    PRAGMA EXCEPTION_INIT (INVALID_FILE_OPERATION,-29283);

    Thank you

  • ORA-29283: invalid file operation, SP2-0103: nothing in the SQL buffer to run.

    Hi gurus of the Oracle,.

    Our version of oracle's 11 g RAC 2.

    We write records into a file using utl_file.

    According to the request, data should write to 160 files.

    After writing to 50 records, his mistake to launch. as

    BEGIN PROC_WRITE_TO_FILE; END;

    *

    ERROR on line 1:

    ORA-29283: invalid file operation

    ORA-06512: at "SYS." UTL_FILE", line 536

    ORA-29283: invalid file operation

    ORA-06512: at "TEST. PROC_WRITE_TO_FILE', line 130 '.

    ORA-06512: at line 1

    SQL > SP2-0103: nothing in the SQL buffer to run.

    My procedure is

    -DECLERATION

    BEGIN

    OPEN C2;

    LOOP

    EXTRACT THE C2 IN P_WRITE;

    WHEN THE EXIT C2% NOTFOUND;

    L_NAME: = "WRITE" | P_WRITE | » _. TXT';

    L_FILE: = UTL_FILE. FOPEN (L_DIR, L_NAME, 'W');

    OPEN C1 (P_WRITE);

    LOOP

    FETCH C1 INTO P_OD_PLACE, P_OD_USER, P_ED_PERF, P_GM_LST, P_GM_FIRST, P_GM_MOD, P_GM_SUFF, P_BD_NUM, P_BD_FRET, P_BD_UNIT, P_BD_GOLE, P_BD_GEP, P_DAT_BOD, P_DAT_EFF, P_ED_RACE, P_ED_GENDER, P_LAND_DIST, P_LAND_LOT, P_ED_STAT_REASON ,P_OD_PRECINCT,P_OD_JANI_PREC,P_NB_PIST_CNG,P_NB_PIST_SEN,P_NB_PIST_VASER,P_NB_PIST_JUD,P_NB_PIST_COMMI,P_NB_PIST_SCHOL,P_NB_PIST_WD,P_NB_PIST_JANIB,P_NB_PIST_JANIC,P_NB_PIST_FIRE,P_NB_PIST_SCHOB,P_NB_PIST_SUPCM,P_NB_PIST_WATBD,P_NB_PIST_GOLEL P_GM_NAME, P_ED_JANI_CODE, P_DAT_ACCEPT, P_DAT_CHANGED, P_OD_COMBO, P_TX_DESC, P_DAT_LST_CTT, P_BD_NUM2, P_BD_FRET1, P_BD_UNIT2, P_BD_GOLE2, P_BD_ST, P_BD_GEP5, P_BD_GEP4, P_BD_FRET2, P_BD_FRET3, P_BD_COUNTRY;

    WHEN EXIT C1% NOTFOUND;

    UTL_FILE. PUT_LINE (L_FILE, P_OD_PLACE: ' |) ' || P_OD_USER |' | ' || P_ED_PERF |' | ' || P_GM_LST |' | ' || P_GM_FIRST |' | ' || P_GM_MOD |' | ' || P_GM_SUFF |' | ' || P_BD_NUM |' | ' || P_BD_FRET |' | ' || P_BD_UNIT |' | ' || P_BD_GOLE |' | ' || P_BD_GEP |' | ' || P_DAT_BOD |' | ' || P_DAT_EFF |' | ' || P_ED_RACE |' | ' || P_ED_GENDER |' | ' || P_LAND_DIST |' | ' || P_LAND_LOT |' | ' || P_ED_STAT_REASON |' | ' || P_OD_PRECINCT |' | ' || P_OD_JANI_PREC |' | ' || P_NB_PIST_CNG |' | ' || P_NB_PIST_SEN |' | ' || P_NB_PIST_VASER |' | ' || P_NB_PIST_JUD |' | ' || P_NB_PIST_COMMI |' | ' || P_NB_PIST_SCHOL |' | ' || P_NB_PIST_WD |' | ' || P_NB_PIST_JANIB |' | ' || P_NB_PIST_JANIC |' | ' || P_NB_PIST_FIRE |' | ' || P_NB_PIST_SCHOB |' | ' || P_NB_PIST_SUPCM |' | ' || P_NB_PIST_WATBD |' | ' || P_NB_PIST_GOLEL |' | ' || P_GM_NAME |' | ' || P_ED_JANI_CODE |' | ' || P_DAT_ACCEPT |' | ' || P_DAT_CHANGED |' | ' || P_OD_COMBO |' | ' || P_TX_DESC |' | ' || P_DAT_LST_CTT |' | ' || P_BD_NUM2 |' | ' || P_BD_FRET1 |' | ' || P_BD_UNIT2 |' | ' || P_BD_GOLE2 |' | ' || P_BD_ST |' | ' || P_BD_GEP5 |' | ' || P_BD_GEP4 |' | ' || P_BD_FRET2 |' | ' || P_BD_FRET3 |' | ' || P_BD_COUNTRY);

    UTL_FILE. FFLUSH (L_FILE);

    END LOOP;

    CLOSE C1;

    END LOOP;

    CLOSE C2;

    UTL_FILE. FCLOSE (L_FILE);

    END;

    /

    Appreciate your suggestions.

    Thank you and best regards,

    REDA

    You understand, but you can't do it?  What?  Move a single line in the right place?

    * sigh * I wish I was your code monkey...

    -DECLERATION

    BEGIN

    OPEN C2;

    LOOP

    EXTRACT THE C2 IN P_WRITE;

    WHEN THE EXIT C2% NOTFOUND;

    L_NAME: = "WRITE" | P_WRITE | » _. TXT';

    L_FILE: = UTL_FILE. FOPEN (L_DIR, L_NAME, 'W');

    OPEN C1 (P_WRITE);

    LOOP

    FETCH C1 INTO P_OD_PLACE, P_OD_USER, P_ED_PERF, P_GM_LST, P_GM_FIRST, P_GM_MOD, P_GM_SUFF, P_BD_NUM, P_BD_FRET, P_BD_UNIT, P_BD_GOLE, P_BD_GEP, P_DAT_BOD, P_DAT_EFF, P_ED_RACE, P_ED_GENDER, P_LAND_DIST, P_LAND_LOT, P_ED_STAT_REASON ,P_OD_PRECINCT,P_OD_JANI_PREC,P_NB_PIST_CNG,P_NB_PIST_SEN,P_NB_PIST_VASER,P_NB_PIST_JUD,P_NB_PIST_COMMI,P_NB_PIST_SCHOL,P_NB_PIST_WD,P_NB_PIST_JANIB,P_NB_PIST_JANIC,P_NB_PIST_FIRE,P_NB_PIST_SCHOB,P_NB_PIST_SUPCM,P_NB_PIST_WATBD,P_NB_PIST_GOLEL P_GM_NAME, P_ED_JANI_CODE, P_DAT_ACCEPT, P_DAT_CHANGED, P_OD_COMBO, P_TX_DESC, P_DAT_LST_CTT, P_BD_NUM2, P_BD_FRET1, P_BD_UNIT2, P_BD_GOLE2, P_BD_ST, P_BD_GEP5, P_BD_GEP4, P_BD_FRET2, P_BD_FRET3, P_BD_COUNTRY;

    WHEN EXIT C1% NOTFOUND;

    UTL_FILE. PUT_LINE (L_FILE, P_OD_PLACE: ' |) ' || P_OD_USER |' | ' || P_ED_PERF |' | ' || P_GM_LST |' | ' || P_GM_FIRST |' | ' || P_GM_MOD |' | ' || P_GM_SUFF |' | ' || P_BD_NUM |' | ' || P_BD_FRET |' | ' || P_BD_UNIT |' | ' || P_BD_GOLE |' | ' || P_BD_GEP |' | ' || P_DAT_BOD |' | ' || P_DAT_EFF |' | ' || P_ED_RACE |' | ' || P_ED_GENDER |' | ' || P_LAND_DIST |' | ' || P_LAND_LOT |' | ' || P_ED_STAT_REASON |' | ' || P_OD_PRECINCT |' | ' || P_OD_JANI_PREC |' | ' || P_NB_PIST_CNG |' | ' || P_NB_PIST_SEN |' | ' || P_NB_PIST_VASER |' | ' || P_NB_PIST_JUD |' | ' || P_NB_PIST_COMMI |' | ' || P_NB_PIST_SCHOL |' | ' || P_NB_PIST_WD |' | ' || P_NB_PIST_JANIB |' | ' || P_NB_PIST_JANIC |' | ' || P_NB_PIST_FIRE |' | ' || P_NB_PIST_SCHOB |' | ' || P_NB_PIST_SUPCM |' | ' || P_NB_PIST_WATBD |' | ' || P_NB_PIST_GOLEL |' | ' || P_GM_NAME |' | ' || P_ED_JANI_CODE |' | ' || P_DAT_ACCEPT |' | ' || P_DAT_CHANGED |' | ' || P_OD_COMBO |' | ' || P_TX_DESC |' | ' || P_DAT_LST_CTT |' | ' || P_BD_NUM2 |' | ' || P_BD_FRET1 |' | ' || P_BD_UNIT2 |' | ' || P_BD_GOLE2 |' | ' || P_BD_ST |' | ' || P_BD_GEP5 |' | ' || P_BD_GEP4 |' | ' || P_BD_FRET2 |' | ' || P_BD_FRET3 |' | ' || P_BD_COUNTRY);

    UTL_FILE. FFLUSH (L_FILE);

    END LOOP;

    CLOSE C1;

    UTL_FILE. FCLOSE (L_FILE);

    END LOOP;

    CLOSE C2;

    END;

    /

  • Reboot does not remove "pending file operations.

    I rebooted my machine to reference VM several times in pursuit of capturing a base layer, but I keep getting stopped at the "Pending File Operations" tells me to restart. Does anyone know a way to find out what is causing this dam? Thank you.

    After some research, I downloaded and ran a small program called State. I had two temporary files lurking around the installation of Adobe Flash. Once I deleted the references of the PendingFileRenameOperations registry key, the creation of the Base Layer has gone through.

  • SYS. Question UTL_FILE survey ORA-29283: invalid file operation

    We have a cron to demand that gives the State of the database in our emails. Recently we have cloned the instance, and all by doing this, we bounced back the entire server.

    After that we stopped getting emails of this instance. When I checked the crontab file and run the scripts manually. It showed the following error.

    SQL > alter session SET smtp_out_server = "xxxx1:100";
    declare
    v_utl_filehandler UTL_FILE. TYPE_DE_FICHIER;
    v_rawfile RAW (32767).
    v_size NUMBER;
    5 v_block NUMBER;
    6 v_boolean BOOLEAN;
    v_file_dir varchar2 (100);
    7 8 v_transfer_location varchar2 (100): = "[email protected], [email protected], [email protected];
    9 v_file_name varchar2 (100): = "mailattachment.doc";
    10 starts
    11 v_file_dir: = "MAIL_DIR";
    12 v_utl_filehandler: = UTL_FILE. FOPEN (v_file_dir, v_file_name, "r");
    13 UTL_FILE.fgetattr (v_file_dir, v_file_name, v_boolean, v_size, v_block);
    14 UTL_FILE.get_raw (v_utl_filehandler, v_rawfile, v_size);
    15 UTL_FILE. FCLOSE (v_utl_filehandler);
    16
    17 sys.utl_mail.send_attach_raw (sender = > '[email protected]')
    18, recipients = > v_transfer_location
    19, subject = > 'database of status of EBS UAT.
    20, message = > "Dear Sir". CHR (13) | CHR (13) |
    21 ' Please find attached file database state of EBS UAT. "| CHR (13) | CHR (13) |
    22 'thank you ' | CHR (13) |
    23 ' oracle@UATDB1'|| CHR (13) | CHR (13)
    24, attachment = > v_rawfile
    25, att_inline = > FALSE
    26, att_filename = > v_file_name
    (27);
    28 end;
    29.
    declare
    *
    ERROR on line 1:
    ORA-29283: invalid file operation
    ORA-06512: at "SYS." UTL_FILE", line 536
    ORA-29283: invalid file operation
    ORA-06512: at the level of line 12

    It was working fine before the cloning.

    Published by: Gerard may 24, 2012 11:52

    I guess that the problem is caused by

    v_utl_filehandler := UTL_FILE.FOPEN(v_file_dir, v_file_name, 'r');
    

    Is the path to the directory "MAIL_DIR" exists in your database server?
    The file 'mailattachment.doc' exists in this path?
    You have read access to this path?

    You can check the path of the directory with:

    select * from all_directories where directory_name='MAIL_DIR';
    

    When the directory does not exist in this table, you need to create (such as s/n):

    CREATE DIRECTORY MAIL_DIR AS 'yourdirectory';
    

    To grant read access to the DBA, you need:

    GRANT READ ON DIRECTORY MAIL_DIR TO ; 
    

    (Overall precondition is that the oracle user (operating system - the user running your oracle instance) can access the given directory).

    Published by: hm on 23.05.2012 22:52

  • ORA-29283: invalid file operation

    Hi friends,
    I m getting ORA-29283: invalid file operation. I tried to use create directory option as well. I have to wriite the file to a specific location determined by the system setting
    even I tried to write by specifying the path setting and direct read/write permision he throw the error.any even input will be highly appreciated.
    Thank you
    Create or replace procedure (table_csv)
    in_succ_fail IN kcc_case_trans_fin_audit.success_or_fail%type by default NULL
    in_team_id IN kcc_case_trans_fin_audit.ounit_identifier_kt%type by default NULL,
    in_run_reference IN kcc_case_trans_fin_audit.run_reference%type by default NULL,
    )
    IS

    v_file_path varchar2 (100) default Null;-to contain the path
    v_file_name varchar2 (100) default Null; - to hold the name of the file
    v_file_name_component varchar2 (20) default Null; - to contain the part of file name
    v_string varchar2 (4000) default Null;
    v_actual_start_date PROVISIONS.actual_start_date%type;
    v_actual_end_date PROVISIONS.actual_end_date%type;
    v_provid_identifier PROVISIONS.provid_identifier%type;
    v_citem_identifier PROVISIONS.citem_identifier%type;
    v_start_date COST_COMMITMENTS.start_date%type;
    v_end_date COST_COMMITMENTS.end_date%type;
    v_ccentr_identifier COST_COMMITMENTS.ccentr_identifier%type;
    v_ccreas_identifier COST_COMMITMENTS.ccreas_identifier%type;
    v_meaning coded_cost_reasons.meaning%type;
    v_cost_centre_code cost_centres.cost_centre_code%type;
    v_sch_start_date schedules.start_date%type;
    v_sch_end_date schedules.end_date%type;
    v_schedule_type schedules.schedule_type%type;
    v_she_ccentr_identifier schedules.ccentr_identifier%type;
    v_she_cost_centre_code cost_centres.cost_centre_code%type;
    v_success_or_fail kcc_case_trans_fin_audit.success_or_fail%type;
    v_file_audit UTL_FILE. TYPE_DE_FICHIER; -File pointer variable
    File_Exception Exception; -User-defined exceptions

    Cursor cur_kctfaudit is
    Select ID, krestr_identifier, person_identifier,.
    ounit_identifier_kt, new_ccentr_identifier
    provis_identifier, ccommi_identifier, schedu_identifier
    success_or_fail, error_message, run_reference
    of kcc_case_trans_fin_audit
    where success_or_fail = in_succ_fail
    or ounit_identifier_kt = in_team_id
    or run_reference = in_run_reference;
    Begin
    -To get the location of the directory, and then to make the name of the file.
    v_file_path: = Adf_Getparam ('END', 'RFDR');
    Select to_char (sysdate, 'ddmmyyhhmi') in the double v_file_name_component;
    v_file_name: = 'kcc_restr_fin_audit_ ' | v_file_name_component |'. CSV';
    If v_file_path is null then
    Raise FILE_Exception;
    End if;
    -If the system "END/RFDR" parameter is not set then do not pass further and get out
    If v_file_path is not null then
    v_file_path: = v_file_path | » \';
    v_file_audit: = UTL_FILE. FOPEN (v_file_path, v_file_name, 'W');
    -v_file_audit: = UTL_FILE. FOPEN ("C: \ KCCTEST', v_file_name, 'W'");
    -If the file to write has been opened successfully
    IF utl_file.is_open (v_file_audit) THEN
    -loops through each line of the file
    I'm IN cur_kctfaudit LOOP
    -The value null if the provis_identifier on the case_tran_fin_audit is null.

    -a code here...

    -to build the string with all the information to write to the file

    v_string: = i.identifier | ','
    || baf_name_list (i.person_identifier, 'P'). ','
    || baf_name_list (i.ounit_identifier_kt, 'P'). ','
    || i.new_ccentr_identifier | ','
    || v_sch_start_date | ','
    || v_sch_end_date | ','
    || v_schedule_type | ','
    || v_she_cost_centre_code | ','
    ||     v_success_or_fail | ','
    || i.ERROR_MESSAGE | ','
    || i.krestr_identifier;
    UTL_FILE. Put_line (v_file_audit, v_string, autoflush = > true);
    END LOOP;

    DBMS_OUTPUT. Put_line (' file Created: ' | v_file_name);
    UTL_FILE. FCLOSE (v_file_audit);
    END IF;

    END IF;
    EXCEPTION
    WHEN utl_file.invalid_mode THEN
    RAISE_APPLICATION_ERROR (-20051, 'invalid parameter Mode');
    WHEN utl_file.invalid_path THEN
    RAISE_APPLICATION_ERROR (-20052, 'Invalid File Location');
    WHEN utl_file.invalid_filehandle THEN
    RAISE_APPLICATION_ERROR (-20053, 'no valid Filehandle');
    -WHEN utl_file.invalid_operation CAN
    -RAISE_APPLICATION_ERROR (-20054, "Invalid File opération");
    WHEN utl_file.internal_error THEN
    RAISE_APPLICATION_ERROR (-20057, 'internal error');
    WHEN utl_file.charsetmismatch THEN
    RAISE_APPLICATION_ERROR (-20058, 'Open with FOPEN_NCHAR but later IO inconsistent');
    WHEN utl_file.file_open THEN
    RAISE_APPLICATION_ERROR (-20059, "file already open");
    WHEN utl_file.invalid_maxlinesize THEN
    RAISE_APPLICATION_ERROR (-20060, 'Row size exceeds 32 K');
    WHEN utl_file.invalid_filename THEN
    RAISE_APPLICATION_ERROR (-20061, "Invalid File Name");
    WHEN utl_file.access_denied THEN
    RAISE_APPLICATION_ERROR (-20062, "file access denied by ');
    When FILE_Exception then
    RAISE_APPLICATION_ERROR (-20002,' system END/RFDR parameter is not defined.) Set the system and try again! ');
    dbms_output.put_line (' system END/RFDR parameter is not defined.) Set the system and try again! ');
    WHILE others THEN
    -dbms_output.put_line (sqlerrm);
    RAISE_APPLICATION_ERROR (-20099, "UTL_FILE Unknown Error");

    END table_csv;
    29283, 00000, "invalid file operation"
    // *Cause:  An attempt was made to read from a file or directory that does
    //          not exist, or file or directory access was denied by the
    //          operating system.
    // *Action: Verify file and directory access privileges on the file system,
    //          and if reading, verify that the file exists.
    

    I have confidence in Oracle reports reality of the more acurrately, you.
    View simplified code that produces the error and after CUT PASTE & showing evidence why Oracle is bad.

  • folder has been changed to protected files operating system due to viruses attached

    Dear Sir

    I am using windows 2000 server and the attached system by a virus, all the hiden folder get protected operating system files. If you know the answer please reply me as soon as possible

    concerning

    Nirmal

    Hello

    Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

    http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads/

  • Failed to install, install WP/LR Sync file operation error

    I'm trying to install WP/LR Sync. I get the message:

    The Add on WP/LR Sync filed to install: there was an error in operation of the file during the installation of the add-on.

    The extension handle help States:

    Solution: The add-on is maybe damaged. Try to download it again

    But it provides no guidance to do it.

    When I look at the Add on he acquired.

    Hello

    I'm sorry about that. I'm working on the problem installing with Adobe but they help really, just answer my message to get rid of something to do. The Adobe Exchange website is full of bugs, and I tried to make it work with her for over 2 months (could have been faster if they respond to emails more than once a week). Perhaps you can feel my frustration

    In any case, you want to install, visit this link:

    http://apps.Meow.fr/wplr-sync/tutorial/

    It works

  • Multiple file operation

    Hello. I'm new to scripting Diadem and need to write a script to perform a task of processing of data on a large number of newspapers measure TDMS files (numbered sequentially). The script has to open each file individually (as they are very large), record the result in a new file, repeat for the following file and so on. I can't find any examples on the forum for Exchange or in the messages but apologies if it already exists.

    Anyone have a script simple example of something similar that I could change? I just need an idea of the main controls.

    Thank you very much

    Hi Mark_A,

    I have a script I can send you to do, but everything first, let me ask you a few questions.  What file formats are your incoming data files in?  If they are in one file other than CT or PDM, you already have a use that loads these files in DIAdem?  Can you send me some of your data files so that I can test the script before I send it?  You want to do any processing of the data in each data file is loaded in DIAdem, or you just want to re - write the data of DIAdem on the disc?  What is your desired output file format?

    Brad Turpin
    Tiara Product Support Engineer

    National Instruments

    [email protected]

  • FG file operation

    Hi all

    I'm just trying to create an overall very functional sample.  When I execuate it for the first time create a file, it must store the file reference in the shift register.  When I execuate it for the second time to add a txt, I should be able to do, but I get an error message.  Please see the attachment.  Thank you!

    Yik

    LabVIEW has a cleaning routine that turns around and clean up all references that you left open in your application. So when a VI goes idle, LV cleans all the toys left laying around.

    This affects the engine test of Action using resources such as the lineups of file etc.

    To test an AE (functional overall) you should create a VI tester that makes writing open and close without the slaughter of VI.

    Ben

  • Added a timeout for a write to measure file operation?

    Hello

    I have a question that I think will produce a very simple and direct answer, but I do not know how to approach it.  I write data to a file of measures LabVIEW and am allowing writing custom Subvi file with a simple Boolean button (i.e. when we click the button data are saved and vice versa).  Instead of having to click the button a second time to stop recording data, I would like that it resets automatically after a certain period of time so that all my files end up being the same size and scale.  I'd like to think that all I have to do is use one of the time functions (functions-> programming-> Timing), but I don't know which.  Any help will be appreciated.

    Thank you

    bsteinma

    That's where.  That's what the button labeled 'Save' does.  You just need your file write code in the structure of matter as well.

  • display of the file operation

    running Windows 7 pro - how can I reverse the order in which files are displayed in Windows Photo Viewer? I use Duplocator to remove duplicate files, but removes it from the list of matches from files duplicated those who must be in the correct order

    Using windows Explorer,.

    Right-click on an empty spot on the page and sort by options are listed.

    Use ascending or descending.

    We can really help with a third-party software options in sorting unless get you lucky and someone using the same utility.

  • Workstation 7 Vista host disk works hard for XP comments file operations

    I'm under Workstation 7.0.0 build-203739 on a Vista Business SP2 host with a pair of disks SAS 15 k with RAID 0. The guest is Windows XP Pro SP3, freshly installed with all the default options for the new virtual machine (256 MB RAM, 10 GB virtual hard drive expansion). The vm startup takes about 20 seconds. A 150 MB of the command line file copy takes anywhere from 30 seconds to a minute and forty-five seconds, and host hard disk castigates all the time.

    By comparison, a configuration similar vm XP on VirtualBox 3.0.8 (192 MB of RAM, 8 GB hard drive expansion virtual) takes over 14 years at startup and 10s to copy the file.

    Advice on how I can reduce this disc screw up? I have read the KB information at http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1008885 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 45838390 & stateId = 0% 200% 2045656292and tried the suggestion to change the settings for vmx on IO and memory. He coached less disc stolen from the start, but the time for copy of file is not largely. I didn't not try the other suggestions, because they are much more involved hardware wise and I assumed that I could achieve vmware good performance on the system when I had already achieved good performances with VirtualBox.

    Check your memeory settings menu > Edition > Preferences > memory: box set 'fit all virtual memory... ". »

    also adding

    mainmem.useNamedFile = "false".

    for the vmx file can help

    ___________________________________

    VMX-settings- VMware-liveCD - VM-infirmary

  • AE CS4 9.0.2 crash on any file operation or to quit smoking...

    I have the demo AE CS4 installed [install base - no additional plugins or scripts]. No script no anchored Panel.

    It worked fine the first two uses. Now, it crashes if I try to stop, import a file, save a file, change/save preferences. I uninstalled all using the uninstall program. Re-installed. I updated with version 9.0.1 and then updated with the version 9.0.2 with no change in behavior. I left two days demo. Our company was ordered as a result of the Production, but it didn't happen. Now, I'm on the spot, justifying an expense for an expensive app that won't run.

    Help appreciated.

    Workstation:

    Mac Pro Intel

    CPU: 2 Ghz Core Duo

    4 GB of RAM

    Apple display

    OSX 10.4.11

    60 GB free space on hard drive.

    Installed Perian and Flip4Mac (but AE worked when they were installed)

    From your description, looks that AE is not able to write to the disk. Have you tried repairing permissions with Mac OS disk utility?

  • dmp Impdp file error: ORA-29283: operation invalid file ORA-06512: at "SYS." UTL_FILE", line 536

    Hi all.

    Sorry to ask this error again, I read a lot of topic in this forum on this subject, but I can't fix it.

    So I create this topic.

    My computer is running oracle database 11 g 2 express edition on ubuntu LTS 14.04.

    I'm trying to import the database of dmp file. That's what I do:


    > sqplus

    opening session with sys as sysdba, then run:

    Hoangnv CREATE USER IDENTIFIED BY hoangnv;

    GRANT CONNECT TO hoangnv;

    GRANT RESOURCE, s/n hoangnv;

    CREATE OR REPLACE DIRECTORY dmpdir AS ' / home/hoangnv/downloads/db ";

    GRANT read, write the DIRECTORY ON dmpdir TO hoangnv;


    my_project.dmp file is stored on /home/hoangnv/Downloads/db folder.

    Finally, I ran the command below in terminal:

    impdp hoangnv/hoangnv@xe directory = dmpdir dumpfile = my_project.dmp logfile = my_project.log


    That's what see the Terminal:

    ORA-39002: invalid operation

    ORA-39070: unable to open the log file.

    ORA-29283: invalid file operation

    ORA-06512: at "SYS." UTL_FILE", line 536

    ORA-29283: invalid file operation

    Any ideas? I run these commands on window and import the database successfully.

    Hello

    Please try the suggestions below:

    1. make sure that the roles granted to the user are 'default' for him.

    SQL > change the user hoangnv the role by default all;

    then try to re-import.

    Note: the DBA role contains the IMP_FULL_DATABASE with it.

    2. try import with the use of the 'System' this time, which is the result then? don't forget to give the system read, write on directory dmpdir.

    3. is the permission to/home/hoangnv/Downloads/db fine OS?

Maybe you are looking for

  • EliteBook 8560p: laptop does not start

    My Elitebook 8560p unbootable. It only shows the HP logo. It has 10 (64-bit) Windows installed. The problem started 24.9.2016.

  • Windows XP updates failed to install with error 0 x 663. KB2656353, KB2656370

    Downloaded from KB2656370 of KB2656353, but the installation failed, got the error code 0 x 663. Tried the suggestions to resolve them, failed again.  Any ideas?  Windows XP Media Center Edition, Version 2002, SP3

  • install the printer driver for HPdeskjet 932C on a laptop HP with xp/pro

    I tried to use the original printer driver supplied with the printer HP Deskjet 932c on my HP laptop which has xp/pro, but I when he was in install mode I got a message saying "this driver is not supported by windows 2000." I would like to be able to

  • connection problem with my wired network:

    My multimedia PC running Vista (SP2) and is connected (wired) via a switch, and powerline Gigabit connection directly to my BT Home Hub. In the last month or two, I noticed a problem that when the PC starts it does not connect to the internet. If I o

  • AVG does not open or uninstall

    AVG Free nightmare... Not just WRONG Hi, my avg free 2011 has frozen the other day while the update, security shield now shows along the lower tab, avg wont turn on, open and just used will uninstall not in any startup mode, System Restore is not sor