File problem

Similar Questions

• Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had...

  Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3

  Hi BrianJ641,

  Follow the steps in the article.

  http://support.Microsoft.com/kb/307545

  Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.

• Satellite P200 - unexplained MIDI file problem message

  Satellite P200 - without any sound media playing I regularly get the pdf file following poster "If you have problems with playback MIDI files please perform following steps.»

  I have no problem with the sound, DVD, MP3 etc.
  No explanation and how can I stop it?

  I always put t understand when this message appears.
  Can you please be more detailed description of the problem?

• A60: screen freezes saying ATI2vag file problem

  l have a display driver problem and l don't know what to do. assistance is needed.

  I have a PC laptop toshiba A60 with an ATI mobility radeon 7000igp pilot and the screen freezes often calm saying problem of file ATI2vag.
  I uninstalled and then re-installed with the tools backup drive, the problem is still there. I went to the ATI site to try a set date and this would fail, as the laptop came with pre-installed drivers, could not find a.

  Installation got to ati display driver, then an INF error video driver not found message. It says go to toshiba for updates, that's what l collect, but toshiba, s display driver is the same version that already have an l there is no update.

  Can I try now. HELP PLEASE.

  Hello

  Usually, you should always use the graphics drivers Toshiba because other drivers from the manufacturer s are not designed for the use of the laptop. Graphics drivers from Toshiba are slightly different because they have a thermal protection.

  So if you are not able to find an update of the graphics driver for your laptop then I would recommend to check the different laptops that have the same graphics card and try to use this driver.

  Concerning

• HP Pavilion DM4: HP Pavilion DM4 missing files problem

  I have a laptop HP Pavilion DMf that I'm trying to make it work properly

  who has missing files

  After I connect to the computer as an admin user

  I get the following message

  API-ms-win-downlevel-user32-| 1 1 - 0.dll

  is missing on your computer

  When I cancel this message box I could

  get get a Firefox browser and browser Chrome to work

  and connect to Web sites

  but Internet Explore triggers the following message

  API-ms-win-downlevel-advapi32-| 1 1 - 0.dll

  is missing on your computer

  some of my applications such as

  Media Player, live mail and HP Security Assistant

  trigger the following error message

  API-ms-win-downlevel-ole32-| 1 1 - 0.dll

  is missing on your computer

  My infographic connects to my wifi internet connection

  I ran the file sfc.exe schecker propgram and when it ends

  it say found missing software

  I was able to open the cbs.log file it creates

  but I do not know how to interpret the results.

  Also I could use instructions on how to recover

  the missing files that it identifies.

  I'd appreciate any help that you can come on me

  to solve my problem

  Hey @wsigner ,

  You need to try a clean Windows installation. Here's help on how to do it.

  Thank you.

• Several files palette in a library/class file problems

  All developing a labview class, I wanted to put the default palette, so I added the relevant dir.mnu file to the class. Unfortunately, the class had a dir.mnu in her file. On the addition of the file, I received an error message on a dependency change * (which makes no sesne, how a palette file can have dependencies!). On the recording of the class and any attempt to reopen it, LabVIEW argues that it is corrupt. Inspect the .lvclass xml files reveals that when I added the new file paletee, LabVIEW actually just added a second reference to the file already in the project palette, he then considered a problem when it tries to load the class. This is clearly a bug on several levels:

  1. It should not possible for the user to induce LabVIEW to create files xml corrupted through such simple attempts to use the documented features.
  2. The underlying problem is that LabVIEW seems to use the classic search/link rules to load the library items, be they a vi (which must have a unique name) or another file (which might well be legitimately not unique).
  3. Almost impossible to rename a palette file without breaking the links palette this bug in particular is very annoying.

  I was able to reproduce the behavior described.

  This was reported to R & D (AUTO ID: 181638) for further investigations.

  Thanks for the comments!

• Write Waveform files problems

  I have problems using the command 'writing of the waveform to the file. Perhaps the problem lies elsewhere. The problem is that even if the path is correct on my front panel indicator, a file is never created. The path to the file is created by using the location of the folder and by creating the file from the timestamp of the time of execution of the program. I would be grateful if someone could explain a solution.

  Curtis

  Your loop never ends?  This wave function to write to a file is outside the loop, then it won't work until once the loop is completed.

• (Huge and abnormal) TDMS files problem

  Hi all

  The TDMS file created by my prog of labview. size of 300 MB and takes a long time to open in tiara and sometimes even system crashes. After that, I managed to open the file and simply delete the last line, tiara functions normally without interruption (scroll operation works normally). How you guys think might be the problem?

  Best regards

  LaxG

  First thing I would try is the defragmentation of the file (use the TDMS Defrag feature in LabVIEW).  I know there are other tricks to make it load faster, but I don't know where my links are at the moment.

• Reading of file problem class

  I wrote an application that back up data to a file as a class of labview. The class consists of the table of waveforms and other classes. When I want to read data from the file, I get error 1527 "tried to read flattened data of a class of LabVIEW that is not currently loaded into LabVIEW".

  I tried to delete class library, because I found on the forums that it could be the cause of the problem, but it's no help. Then I put the class library, and now I get the error "end of file encountered.

  I don't know what I'm doing wrong, because I used the same approach several times and it worked fine.

  Is there another way to read data in the file? For example, if I want to know how the waveforms table is saved in the binary file I could analyze the data from file.

  I have Labview 2011.

  I'm guessing that this happens because only the class lost its changing history, so he doesn't know how to load old data. What could cause this is made to rename the class and moving to or from a library (as you found it). Replacing it does not back the history of the mutation and the only option is to go back to an older version of the class (if you have the source code control).

  Here are some relevant links, including descriptions of the flat how data are backed up, in no particular order:

  1. http://lavag.org/topic/14548-class-mutation-history
  2. http://zone.NI.com/DevZone/CDA/tut/p/ID/6316
  3. http://lavag.org/topic/13441-unflatten-from-string-on-class-Error-1527
  4. http://labviewwiki.org/LVClass_Data_Storage_Format
  5. http://digital.NI.com/public.nsf/allkb/103A235CD004CF5B862577E400752398
  6. http://zone.NI.com/reference/en-XX/help/371361H-01/lvconcepts/flattened_data/
  7. http://lavag.org/topic/9705-behaviour-when-loading-class-data-from-a-flat-binary-file

• ".Iak" PSC file problem

  Hi all

  In my project I am using materials of CFP. I kept the ".iak" file in the folder of media files, which has all the required files for the project.

  I call "FP open.vi", give the path of the file ".iak". I had installed, referring to the following link.

  Link

  Now the problem is, when I install the tool on the other PC (with LabVIEW or LabVIEW no) when I run the exe, it asks for the file ".iak". Although I took all the necessary measures mentioned in the link above.

  Can you tell me if I'm missing something? Or is there another solution to this problem?

  Sorry for the very late reply.

  http://digital.NI.com/public.nsf/allkb/B0567407397065F586256BE30063F302 this link helped me to solve my problem.

  Thanks to the application engineer OR

• wmploc.dll file problems

  When I try to play the wmp, I get the following message: the file wmploc.dll has a version number of 11.0.6002.1811 where 11.0.6002.18311 was expected.  Windows Media Player is not installed correctly and must be reinstalled.  When I try to reinstall, the system tells me that a previous version is installed, not allowing does not correct the problem.  What can I do?

  Hello

  After the WMP update you an error of wmploc.dll on the version number being
  incorrect - see this 1st
  http://support.Microsoft.com/kb/961047

  Follow these steps in the order given, even if you did a few before - please don't skip anything.

  Have you recently installed another player?

  Right-click on taskbar - process and see if WMPlayer.exe is already hidden. If so end
  treat this subject.

  --------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? Do you have
  has added another player recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html
  ----------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No sound on the video file problem

  original title; sound playback problem

  I play a Matroska video file its DTS.x264 I have a very good picture but no sound! If I use another player that I get sound but terrible video, media player works fine with all other types of video files! How can I sort this please

  Hello
   
  1 - is this problem come just playing one Matroska file or all those files?
   
  To read Matroska x 264 files in a Windows computer, you will need to appropriate decoders. Your computer does not have appropriate decoders or decoders you have might not work properly.
   
  I suggest you go through the information in the following article and see if that helps you:
   
  Matroska - reading Windows
  http://www.Matroska.org/technical/guides/playback/Windows/index.html
   
  It will be useful.

• delete mutiple files problem

  I can't remove the multilple files. My Shift and Control keys function normally but doesn't work when I try not and multiple delete. I can delete individually.

  Hello

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the disk check and verify if it helps:

  How to perform disk control errors in Windows XP

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

   

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists. To see how to do the SFC Scan click on the link below and follow the steps in the Kb article.

   

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

   

  Method 3:

   

  Also, try to create the new user account and check if the problem persists:

  How to create and configure user accounts in Windows XP

   

   

  I also suggest you to optimize Windows XP for better performance and check if that helps:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• SP3 will correct a missing System 32 file problem?

  I have been cheated by removing

  C:\Windows\System32\rundll32.exe

  as a result of something being allowed in my computer because of what I perceive as a failure of my anti-virus program.

  I can access Internet, but not my MS Office 2007 applications.  If I download and install SP3 on my PC it will restore this missing file?  Or is there another way to go about it - I tried to copy the file into another folder where I found the System 32 folder and that did not work.

  Thank you!
  

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest

• Hidden files problem

  While selecting the option "Show the hidden files and folders" in Folder Options, hidden files appear again and again, the option button is shown against "do not show hidden files" or folders. Please, help me to solve this problem.

  Are you logged in with administrator rights?  You can always make changes by logging on as administrator in safe mode to make this change.

  Go to start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.  Then in Windows Explorer make sure that view, details is selected and then click view, choose details and check before the name, Type, size, free space.

  Another response of the community of Windows XP newsgroups