file read write binary error 116

Similar Questions

• Can not open Illustrator CC 2015, read/write permissions error, but the permissions are set correctly.

  I can not open Illustrator because of this error.

  "To work properly, Adobe Illustrator requires permissions of folder preferences be"read-write..." »

  Link support on the error message suggests to change permissions to a file location that does not exist. All permissions are set to read-write, and no changes have been made since the upgrade to 2015.  Uninstalling and reinstalling did not work.  Very frustrating to pay for a product that I can't use.

  I solved the problem by resetting the permissions of my entire disk (apply to items included...). I still can't explain why it was necessary after the upgrade to 2015 from 2014 CC CC.

• File read/write adapter

  Hi all
  
  I have a specific scenario with the file adapter. The composite consists of the file adapter Inbound services, component of BPEL and the reference of the outgoing file adapter. So, let say my BPEL obtained the file named input1.xml, the BPEL should write the file whose name is input1.xml only. If the name of the file that reads the BPEL is input2.xml, then the file name that will write the BPEL is input2.xml only. So, how to get the file name of the file we read in BPEL and apply the same name for the file that we will write.
  
  Thank you
  N

  HI'.

  If you use the read operation then below blog can help you get the name of the file,

  http://Abhishek-soablog.blogspot.com/2008/06/BPEL-getting-file-name-from-file.html

  in the same post, someone asked how to pass the name of file to write, the solution is given here.

  Yatan-

• File read write error

  Hey guys

  I write a string in a .txt file with air.  The chain gets its data from the names of files in a directory, the user selects.  Once it is written, I can send it to a download function.

  The problem I encounter is that is works fine the first time, but if the user tries immediately, I get the error:

  Error #3013: File or directory is in use.     (it refers to the line in bold below);

  The following code is stripped of my project, but I am able to reproduce the problem with that:

  ------------------------------------------------------------------------------------------ ----------------------------------

  Var list: Array = new Array();

  var stream: FileStream;

  var incr:Number = 0;

  var filenameVar;

  browse_but.addEventListener (MouseEvent.CLICK, travel);

  Browse function (e:MouseEvent): void {}

  nMF = new File();

  nMF.addEventListener (Event.SELECT, filesSelected);

  nMF.browseForDirectory ("select your file directory");

  }

  function filesSelected(event:Event):void

  {

  Add selected files to table 'list '.

  list = nMF.getDirectoryListing ();

  for (var i: uint = 0; i < list.length; i ++) {}

  fileNamesString is fileNamesString + list [i] .name;.

  }

  setSaveFileName();

  }

  function setSaveFileName (): void {}

  filenameVar = "text.txt".

  saveFile();

  }

  function saveFile() {}

  var newFile:File = File.desktopDirectory.resolvePath("dir1/dir2/"+filenameVar;)

  Stream = new FileStream();

  Stream.Open (newFile, FileMode.WRITE);

  stream.writeMultiByte (fileNamesString, "utf - 8")

  Stream.Close ();

  stream.openAsync (newFile, FileMode.READ);

  stream.addEventListener (Event.COMPLETE, uploadFunc);

  }

  function uploadFunc(event:Event) {}

  nothing of consequence here affects the result.

  }

  ------------------------------------------------------------------------------------------ -----------------------------------------

  If I remove the code pointed out, the problem goes away.  But I need to have it there to test whether the file was written before being sent to a download function (there is a bug in the Air that will let you listen to for a complete event when writing the files to your hard drive.

  Also, I have other functions to send data to the function saveFile (each with different string data and a different to save filenameVar under), and they work fine.  The difference is that their string data come from a browse file, it is created from the text entry boxes.

  Nothing obvious here which is tripping me?

  Thanks for your help.

  Shaun

  Who gave a kglad of crack with no change, but which lead me to understand the problem.

  I had a second var stream "filestream' open for the download function, but never closed.  For some reason, there everything worked well until the channel I wrote in the text file was from a repertoire of navigation and to obtain the names of files.  I don't quite understand it.  In any case, close the second fixed stream.  I think I'll see if I can get rid of second stream altogether.

  BTW the first stream always had a stream.close () in my code, so that took care of this one.

  Thanks again mate

  Shaun

• read/write binary file in struct

  Hi all,

  I created a profile of struct defined as follows:

  typedef struct {profile

  name char [30];
  Electric float;
  Double frequency;
  Profile of struct * next;

  }

  I can write structures in a file, but I have to do that when you try to insert a struct, you control the domain name and only if there is no other struct with this name, it is inserted into the file.
  Please help me!

  I solved it!

• File read/write

  Hi all

  I am writing a file using this code.

  protected void writeFile (String text) {}
  DataOutputStream os = null;
  FileConnection fconn = null;
  try {}
  fconn = (FileConnection) Connector.open ("file:///store/home/user/documents/file.txt", Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn. Create();

  OS = fconn.openDataOutputStream ();
  OS. Write (Text.GetBytes ());
  } catch (IOException e) {}
  System.out.println (e.getMessage ());
  } {Finally
  try {}
  If (null! = os)
  OS. Close();
  If (null! = fconn)
  fconn. Close();
  } catch (IOException e) {}
  System.out.println (e.getMessage ());
  }
  }}

  the code works fine.
  My problem is suppose I write first "Banglore" and when I read it, I get "Anne."
  But, second time when I write "India" and when I read it, I, 'Indialore '.
  So basically its content does not change according to the text, I give you.
  Please tell me how to solve this problem.

  Thank you

  Its done, I used
  fconn. Truncate (Text.GetBytes (). Length);

• Read/write file binary change greater than 128 bytes.

  Hi all, maybe a strange question, but I'm scratching my head on this one. There is undocumented behavior in the function of read/write binary file, where U8 a value greater than 128/0 x 80 get automatically converted to 0x3F value?

  I try to use LabVIEW to generate a binary file custom that we'll load in an EEPROM, so all data in the binary file is stored as values of U8. I have a "template" file, and eventually I'll take the logic implemented to replace the fields with the data from the true value. However, I am struck by the anomaly that when I just read the file in LabVIEW and then réécrirait, all the values 0x80 and more are truncated to 0x3F value. Has anyone seen this before, and is there a solution?

  I noticed writing the value 0 x 80 directly to one generates a binary file (such as a U8) 0 x 90, 0 x 70 being written in the binary file. It is also rather undesirable, as it adds additional bytes in the bytestream, and the bytes of EEPROM must be in exact locations.

  

  

  Join your data file.

  This program is to give the images below?  Are you sure that LabVIEW is to write the bytes differently?  I really doubt that.

• Error 116 when a string of binary file reading

  I try to use the 'writing on a binary' and "binary file reading" pair of VI to write a string to a binary file and read it again.  The file is created successfully and a hex editor confirms that the file contains what is expected (a header + chain).  However, when I try to read the string back once again, I received an error 116: "LabVIEW: Unflatten or stream of bytes read operation failed due to corrupted, unexpected or truncated data.»  A quirk I found though, is that if I put "endianness" to "Big-Endian, network order", the error disappears when I use "native, welcome the order" (my original setting) or "little-endian" error occurs.  Did I miss something in the documentation indicating that you can use big endian order when writing of strings, I do something wrong, or is this a bug in Labview?  Because the program that it will be used for is to write large networks, in addition to channels, I would like to be able to stick to the 'native' setting for speed purposes and must not mix "endianness".

  I have attached a VI of example that illustrates this problem.

  I'm using Labview 8.5 on Windows XP SP2.

  Thank you

  Kevin

  Hello

  Please contact National Instruments!  I checked the behavior that you have met and agree that it is a bug, it has been reported to R & D (CAR # 130314) for further investigation.  As you have already understood possible workaround is to use the Big-Endian parameter.  Also, I am enclosing another example that converts the string to a binary array before writing to the file, and then converts to a string according to the playback of the file.  Please let me know if you have any questions after looking at this example though and I'll be happy to help you!  Thank you very much for the comments!

• Reading a binary file - access error

  I am new to the discussion Forum OR and had a basic question on the use of Labview to read a binary file.

  For my application, I need Labview to collect a single value (pulse width) of a custom program that is written in C++. Currently, this value is stored in a temporary file of binary data. I'll run Labview and the custom program at the same time.

  Is it possible to read a binary file using Labview while the file is written by another program to? At the moment I get an access error. I use a binary code to read the library of example Labview base.

  Thanks for your suggestions!

  I'm surprised that Windows would let you copy of the file if the other program still has a lock on it.  How you try to open your file in LabVIEW now?  Maybe if you open the file with accesss unalterable, Windows will allow you to open it in LabVIEW.

  Yes, you can copy files in LabVIEW.  There are functions to copy under the palette file IO.  In addition, you can use a copy within the service system Exec command.

• Sandboxed apps cannot read / write files to the main user Id

  All of my sandbox applications give me errors like this and I checked that my permissions are correct and there is no ACL involved.  I'm really tired.  I can't save documents in any player, including the readers with the value 'IGNORE OWNER PERMISSIONS'. I was able to use a different connection of the user (the same group id) to create and save a document, but my main user (rfbrost) couldn't read.

  Could not open a document that had been written at the earliest

  05/12/15 6:39:55.000 PM kernel [0]: sandbox: Numbers (76643) deny/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT file-read-xattr! / INVOICES/2015/Sherri of Bill 151127.numbers

  05/12/15 6:39:55.000 PM kernel [0]: sandbox: Numbers (76643) deny read-data file

  / Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri of Bill 151127.numbers

  05/12/15 6:39:55.103 PM sandboxd [399]: Numbers (76643) ([76643]) deny read-data file

  / Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri of Bill 151127.numbers

  iMac - 5 k (1): 2015 rfbrost$ ls - ö @ * 151127.numbers*

  -rw - r - r-@ 1 rfbrost family - 1065117 1 Dec 16:39 151127.numbers Bill Sherri

  com Apple.Metadata:kMDItemDownloadedDate 53

  com Apple.Metadata:kMDItemWhereFroms 381

  Note: It is there no ACLs

  -------------

  Could not write a document created from a template

  
  

  05/12/15 6:53:56.350 PM sandboxd [399]: Numbers (76643) ([76643]) deny-read-data file /private/var/folders/x5/3sxc34k13j12nv9twq2_m_fc0000gn/C/com.apple.iconservices store.index

  iMac - 5 k (1): com.apple.iconservices rfbrost$ ls - ö @.

  -rw - 1 personal rfbrost - 7655424 Nov 25 15:25 store.index

  Note: It is there no ACL or flags

  
  

  05/12/15 6:54:00.309 PM Numbers [76643]: __41 + [NSSavePanel _consumeSandboxExtensions:] _block_invoke: sandbox_consume_fs_extension failed

  05/12/15 6:54:00.000 PM kernel [0]: sandbox: Numbers (76643) deny file-writing-creation/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / RE-IMBURSEMENTS/Untitl ed copy.numbers

  05/12/15 6:54:00.854 PM Numbers [76643]: * error:-[TMADocument writeSafelyToURL:ofType:forSaveOperation:error:] TMADocument.m:3071 cannot save the document to the URL: file:///USERS/rfbrost/DOCUMENTS/BUSINESS/CURRENT/iWILLhandleIT!/RE-IMBURSEMENTS /Untitled%20copy.numbers

  iMac - 5 k (1): iWILLhandleIT. rfbrost$ ls - ö @.

  drwxr-xr-x 2 rfbrost family - 68 Dec 5 18:00 RE-IMBURSEMENTS

  Note: It is there no ACL or flags

  
  

  -------------

  Could not write a document created from a template (tried having a duplicate)

  
  

  05/12/15 7:41:02.590 PM Numbers [76643]: __41 + [NSSavePanel _consumeSandboxExtensions:] _block_invoke: sandbox_consume_fs_extension failed

  05/12/15 7:41:03.151 PM Numbers [76643]: * error:-[TMADocument writeSafelyToURL:ofType:forSaveOperation:error:] TMADocument.m:3071 cannot save the document to the URL: file:///USERS/rfbrost/DOCUMENTS/BUSINESS/CURRENT/iWILLhandleIT!/INVOICES/2015/U ntitled%20copy.numbers

  05/12/15 7:41:03.268 PM sandboxd [399]: Numbers (76643) ([76643]) deny file-writing-creation/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! copy.numbers/FACTURES/2015/Untitled

  -------------

  
  

  Could not open a document that was reproduced by the finder

  05/12/15 6:48:29.000 PM kernel [0]: sandbox: Numbers (76643) deny/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT file-read-xattr! / INVOICES/2015/Sherri Bill copy.numbers 151127

  05/12/15 6:48:29.306 PM Numbers [76643]: * the #8 Assertion failure:-[TSAImportController prepareForImportDisplayingProgress:] TSAImportController.m:301 could not create the importer for the document at/USERS/rfbrost/DOCUMENTS/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri invoice copy.numbers 151127.

  05/12/15 6:48:29.000 PM kernel [0]: sandbox: Numbers (76643) deny-read-data file/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri Bill copy.numbers 151127

  05/12/15 6:48:29.000 PM kernel [0]: sandbox: Numbers (76643) deny-read-data file/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Sherri Bill copy.numbers 151127

  iMac - 5 k (1): 2015 rfbrost$ ls - ö @ * 151127 *.

  -rw - r - r-@ 1 rfbrost family - 1065117 1 Dec 16:39 151127 invoice copy.numbers by Sherri

  com Apple.Metadata:kMDItemDownloadedDate 53

  com Apple.Metadata:kMDItemWhereFroms 381

  -rw - r - r-@ 1 rfbrost family - 1065117 1 Dec 16:39 151127.numbers Bill Sherri

  com Apple.Metadata:kMDItemDownloadedDate 53

  com Apple.Metadata:kMDItemWhereFroms 381

  Note: It is there no ACL or flags

  
  

  -------------

  
  

  Could not open a document that was created by the user in the same group:

  
  

  05/12/15 7:47:13.924 PM Numbers [76643]: * the #11 Assertion failure:-[TSAImportController prepareForImportDisplayingProgress:] TSAImportController.m:301 could not create the importer for the document at/USERS/rfbrost/DOCUMENTS/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Reimburs ements.numbers

  05/12/15 7:47:13.000 PM kernel [0]: sandbox: Numbers (76643) deny-read-data file/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Reimburs ements.numbers

  05/12/15 7:47:14.086 PM sandboxd [399]: Numbers (76643) ([76643]) deny file-read-xattr/Users/rfbrost/Documents/BUSINESS/CURRENT/iWILLhandleIT! / INVOICES/2015/Reimburs ements.numbers

  05/12/15 7:50:18.616 PM Finder [573]: [QL] try again after preview was a different type of .

  iMac - 5 k (1): 2015 rfbrost$ ls - ö @ * refund *.

  -rw-rw-r-@ 1 rfbrost family - 1065117 1 Dec 16:39 Reimbursements.numbers

  Note: It is there no ACL or flags

  Follow-up: I made a boot SAFE and SECURE connection and was able tot save the iCloud, but no other player, including a USB doesn't stick with 'IGNORE the PERMISSIONS ON this VOLUME' of.  I firmly believe that, despite the error message, this is not a problem of file system permissions, it has something to do with the sand boxed apps and my primary UID.  I created a group called family and I made this my main group by using the utility of directory identifier.  I changed then owners on my hierarchy so that my files were all held by the new group ID.  I noticed that the message an error about a file created from a template generated the error:

  05/12/15 6:53:56.350 PM sandboxd [399]: Numbers (76643) ([76643]) deny-read-data file /private/var/folders/x5/3sxc34k13j12nv9twq2_m_fc0000gn/C/com.apple.iconservices store.index

  And when I listed the permissions: imac-5 k (1): com.apple.iconservices rfbrost$ ls - ö @

  -rw - 1 personal rfbrost - 7655424 Nov 25 15:25 store.index

  I noticed that the temporary file is created as the ID of Group staff.  Whence the system get this info?  My primary group ID is now family.  It should not important here because the file does not have still permissions RWX group, but it is strange to me.  What is a latent bug that the default group is always personal?

  Finally, I'm able to drag the file created and saved on the disk to my main iCloud file hierarchy and read it very well.  At other times, in a sandbox application, I am able to duplicate the file and save the duplicate but not the original file (called untitled) created from a template.

• What is the best way to read this binary file?

  I wrote a program that acquires data from a card DAQmx and he writes on a binary file (attached file and photo). The data I'm acquisition comes 2.5ms, 8-channel / s for at least 5 seconds. What is the best way to read this binary file, knowing that:

  -I'll need it also on the graphic (after acquisition)

  -J' I need also to see these values and use them later in Matlab.

  I tried the 'chain of array to worksheet', but LabView goes out of memory (even if I don't use all 8 channels, but only 1).

  LabView 8.6

  I think that access to data is just as fast, what happens to a TDMS file which is an index generated in the TDMS file that says 'the byte positions xxxx data written yyyy' which is the only overload for TDMS files as far as I know.

  We never had issues with data storage. Data acquisition, analysis and storage with > 500 kech. / s, the questions you get are normally most of the time a result of bad programming styles.

  Tone

• Error 7 open/create/replace the file to write spreadsheet String.vi

  Hello

  I try to use a CompactRIO with 9225 analog input module for measuring an analog signal.

  Version of LabVIEW is 2013 (32 bit), when I run only e VI, errot 7 has taken place.

  I'm sure that the path is correct, but the error information indicate used different path "------" is not "/", I have attached the picture.

  I don't know why this is happening, appreciate any suggestion to solve this problem.

  Thank you.

  Frank

  The cRIO-9075 doesn't have the ability to mount a Windows network share and the read/write directly with the host computer.  You'd have to do, this is the file from the FTP host (the host has to a customer, and the RT system has a server) or to run an FTP server on the host that the target can interact with (the host would then have a server, and the target's screws of the FTP client) to get the file to the location.

  -Danny

• Difficulty using the binary read/write

  Hello

  The binary read/write function somehow not working properly in my application.

  I have one store a 2D strign binary array. When the user closes the application, the application stores the values in table in the Bin file.

  N when the application starts, it reads the file and displays its contents on the table.

  The system works well if the total size of the content is 3 bytes. But if the size of the content is greater than 3 bytes, the program simply returns a NULL value at first when I read the Bin file.

  How to save:

  Convert 2D in String table using "Flatten the string" fn and to save in a binary file.

  Procedure to read:

  read a binary file. convert the output string table 2D using 'string Unflatten ".

  I enclose my code here. PLS, have a look at it and let me know the cause of the problem.

  Ritesh

  I don't understand why you're flattening of a string, a 2D channels table. It's redundant. You seem to be also the substitution of the default big-endian to little endian byte order. You try to save it in a format suitable for other programs on other platforms?

  If this is not the case, all you have to do is:

  

• read an AVI using "Binary file reading" vi

  My question is to know how to read an avi file using vi «The binary read»

  My goal is to create a series of small avi files using IMAQ AVI write framework with the mpeg-4 codec to long 2 seconds (up to 40 images in each file with 20 frames per second) and then send them one by one in order to create a video stream. The image has entered USB camera. If I read these frameworks using IMAQ AVI read framework then compression advantage would be lost if I want to read the entire file itself.

  I've read the avi file using "Binary file reading" with 8 bit unsigned data format and then sent to the remote end and save it and then post it, but it did not work. Later, I found that if I read an image using "Binary file reading" file with 8 bit unsigned data format and save it to local computer itself, the format should be changed and it would be unrecognizable. I'm doing wrong by reading the file format of number integer 8 bit unsined or should I have used other types of data.

  I'm using Labview 8.5 and Labview vision development module and module vision 8.5 acquisition

  Your help would be very appreciated.

  Thank you.

  Hello

  Discover the help (complete) message to "write in binary.

  "Precede the size of array or string" entry by default true, so in your example the data written to the file will be added at the beginning information on the size of the table and your output file will be (four bytes) longer than your input file. Wire a constant False "to precede the array or string of size" to avoid this problem.

  Rod.

• When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected

  When I tried to back up my files, I got an error (0 x 80070013) indicating that the media is write-protected. How can I solve this problem? Thank you for your time, Shawn

  You may not have the correct permissions or own the medium on which you try to perform the backup.  Here are some instructions on how to give you the right permissions and Take Ownership (if necessary).

  To view your permissions, right-click on the file/folder/drive, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/. In this csse make sure grant you full permissions and check also advanced special permissions (including the inherited permissions) which can substitute for this entry to limit your rights by assembling as well.

  To resolve this problem with folders or drive, take possession of the records or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.