File recovery after an accident with my portable HARD drive?

Similar Questions

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• recovery disc will work with the new hard drive

  I have a HP Pavilion dm4. My hard drive died so I installed a new hard drive. The original operating system installed on the computer is Windows 7. I don't have a Windows 7 disc with the computer. If I order the Windows 7 HP recovery disk, it will install Windows 7 on my new hard drive? I got the info from COA. Thanks for any help you can provide.

  If the new hard drive is having even or a larger size than the old, recovery disks will reinstall the factory OS on your new drive.
  
  Thank you

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• The digitized files disappear after that scanning with HP Solution Center update

  The digitized files disappear after that scanning with HP Solution Center update

  Have a HP Officejet Pro L7590 all-in-one.  Under Vista 64-bit.

  Updated my Center of solutions for version 14.  Now when I scan something, it scans OK then when I save to file it away.  Looked on the HP site and found Update critical for this problem, however, the critical update is to version 13 and when I try to run it it tells me I need not and will not continue.

  Also: (maybe something to do with the problem) when using the / opening of the solution Center, when I goes to the buttons "ScanPicture" or "Scan a Document" and then click on "Change settings" there is nothing in the drop-down list for the ' Scan To: ' section.

  Have tried uninstalling and reinstalling several times.  Does not work.

  See you soon!

  Hello

  Two questions actually related to each other.

  Please, try the following:

  Make sure that the HP Solution Center is closed.

  Enter C:\Program Files (x 86) \HP\Digital Imaging\bin and search for the file hpqxmlul.dll .

  Move this file to a temporary folder elsewhere as your office, just to backup porpuses.

  Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.

  Move this file in C:\Program Files (x 86) \HP\Digital Imaging\bin.

  Today the launch of the HP Solution Center and test analysis, check any changes with the sweep for list as well.

  Please let me know of any changes.

• I have two portable hard drives with music and video files and cannot get them to play

  I have two portable hard drives with music and movies files can get them to play my laptop girlfriend see them, but does not play

  If you copy the files on the portable hard drive will they play?

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• I use MozBack to the top, when I followed the instructions of the wizard a file on my portable hard drive. I went back to Thunderbird and my Inbox was deleted

  I use MozBack to the top, when I followed the instructions of the wizard a backup file on my portable hard drive. I'm back to Thunderbird I found the content of my Inbox was deleted. Sent and deleted files have not been removed. I then returned to MozBackup and followed the instructions to restore the information from my Inbox, but it didn't happen.
  What I did wrong.

  as incredible as it may seem. MozBackup has nothing to do with Mozilla or Thunderbird. If you have any questions about mozbackup I don't really know where you're going.

• Recovery disks do not work with the new hard drive?

  Hello, everyone.

  I have a laptop HP (pavilion dv7-1245dx) and the hard drive is dead. I had never gotten to burn my recovery disks, so I ordered new ones from HP. When I installed the new hard drive and popped in the disk to reinstall the operating system, it gave me the error message:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  Error code: 0100-30 FC-3602-3603

  The original hard drive was a Hitachi, 320 GB SATA

  The new hard drive is a WD 500 GB SATA

  Any assistance anyone can give would be great. :]

  Thank you for your time,

  C

  EDIT: Trying to recover a Vista operating system

  For anyone who has the same problem, I found a solution. I cloned the original hard drive using the Clonezilla fallback option. After using Clonezilla to image on the new hard disk, the partition which held that most of the data of the laptop is not mountable, however the partition containing the restore partition was a perfect copy. I turned on the computer, hit escape to access the menu (for a list of options such as boot order, etc, which included an option for recovery), and then choose recovery option. While the recovery discs, I received from HP refused to work with the new hard drive, the Vista restored cloned recovery partition without flaw.

• Convert.exe works with the portable USB drives?

  Back when helping people spend 98 or ME to XP, there is a utility called convert.exe which could convert not destructive HDD FAT32 to NTFS.

  This utility will work with a hard disk of laptop USB instead of an IDE drive? Some utilities are skittish about the material, and he did for years I've used this utility. I need to convert a portable hard drive 320 GB in NTFS for a virtual machine to run with VMware Player for a night school class, and I would rather not delete it if I have to.

  SlickRCBDsalvation,

  Yes, it is possible to convert the file system fat32 of NTFS for a USB hard drive.

  Reference:

  Convert a hard disk or partition to NTFS format
  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-a-hard-disk-or-partition-to-NTFS-format

  Warning: formatting a volume will destroy all data on the partition. Be sure to back up any data you want to save before you begin.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How to use Ready Boost, and what are the requirements for the use of portable hard drives and flash drives for use with Ready Boost?

  I have Windows 7 64 bit Ultimate Edition and try to get Ready Boost to work on my PC using portable hard drives or flash drives. I have 2 portable hard drives (iomega 120gig, Seagate 250gig) and a 8gig sandisk cruzer flash drive. All this deterioration when you try to use the ready boost said that these discs only are not compatible or not supported. So what do I need?

  Not all readers will work with ReadyBoost. There are some readers who actually will specify that they are capable of ReadyBoost.

  By WikiPedia:

  • The device should have an access time of 1ms or less.
  • The device must be capable of 2.5 MB/s for 4 KB random read speeds indicates the spread uniformly across the entire device and 1.75 MB/s write for 512 speed random writes spread uniformly across the device.

  You must also put the device and let it plugged in for ReadyBoost. ReadyBoost is therefore best suited for a small thumbdrive (up to 4 GB) that greater thumbdrive or external HD that you would probably be disconnect from time to time.

  Open solutions Explorer window, find your Cruzer - right-click on it and click Properties. If there is a ReadyBoost tab, you can set up - set it to dedicate this device to ReadyBoost. It will be implemented and save a file on the USB key. Click Apply and're you good to go.

  A caveat which I can testify first-hand. Apparently while booting, Win 7 has trouble with some USB key - it will search the thumbdrive, the operating system, the process of starting to stall and you say: ' Missing Operating System ' - Fortunately the solution is very easy. Shut down the computer, remove the USB key, restart the computer and it will start normally. I had this happen with a 8 GB Cruzer. This seems to be a random thing, because I had the Cruzer plugged in and booted several times without encountering the error of missing operating system message. No idea why or why it is injury. Currently, I use a Kodak USB 2 gig key that seems to work very well.

• I deleted a file from my portable hard drive, can I get it back?

  I deleted a file from my portable hard drive, I need help to get it back?

  First stop using your portable player as your deleted folder is now considered to be unallocated space and can be replaced by new data. This would then make your chances of recovering your file much less likely.

  First check your trash. If it is not there then...

  There are some free and paid for recovery software. Just Google.

  If there are companies that specialize in data recovery. This would be an expenditure of significabt, but would probably be to maximize your chances. It depends on your expertise & how data is important for to know you which way you want to choose.

  One last point if your data is important, be sure to have a backup plan in place. Having your important data in one place requires trouble.

• The file ProductionPremium_cs5_ls7.7z is corrupted from the adobe download page, my portable hard drive crashed and I am trying to reinstall, and naturally, I can't talk to someone at Adobe, please help

  The file ProductionPremium_cs5_ls7.7z is corrupted from the adobe download page, my portable hard drive crashed and I am trying to reinstall, and naturally, I can't talk to someone at Adobe, please help

  Try a different download link

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

• How to copy a file photo of iMac for portable hard drive

  I want to save a series of photos on a portable hard drive. Drag the file from my 'albums' location does not work. What I am doing wrong?

  Jeff

  What photo app are you using and are really still on Tiger 10.4.1? Finally, we need to know how the EHD you use are formatted. If you n ' t know this, select the drive in the Finder, and then type the command-I (as Ivan) and search for information on the format.

  If you are not sure which version of Mac OS X, please click on the Apple symbol in the upper left corner of the screen and select about this Mac.

  Without these bases, it is difficult to answer your question, please read the above carefully and answer all questions.

• How to copy the itunes file on a portable hard drive in Vista

  Can you give me the steps for the copy of my file iTunes on a portable hard drive?  I use Windows Vista.

  Hello

  iTunes for Windows: moving your iTunes Media folder

  http://support.Apple.com/kb/ht1364

  iTunes: back up your iTunes library by copying to an external hard drive

  http://support.Apple.com/kb/ht1751