file retrieved via JavaLoader.exe .cod signatures

Similar Questions

• Problem when u - save the *.cod file using javaloader.exe

  I have a project for coding in c#.

  When I runing comand u save using javaloader.exe and then only to save file to the same folder as javaloader.exe .cod.

  So, how can I save to a different directory (folder).?
  Please tell my way. ! Thank you very much. !

  Yes, thank you replied.

  Now I got it in c#, I used the "FileInfo" and "MoveTo" properties

  Affter all recorded the *.cod file in the same directory with javaloader, I call "MoveTo" to move all in my repertoire *.cod file (file made by myself).

  That's all

  Code:

  for (int j = 0; j)< dem;="">
  {
  String filename = list_modules. CheckedItems [j]. ToString();
  FileInfo info = new FileInfo (path1 + "\" + name + ".cod");
  info. MoveTo (path2 + folder_name + "\" + info.) Name ());
  }

• File \i38\system32\ntkrnlmp.exe could not be loaded. The error code is 32 768. Implementation cannot continue.

  original title: I get an error code 32768

  File \i38\system32\ntkrnlmp.exe could not be loaded.  The error code is 32 768.  Implementation cannot continue.  How can I fix?

  Hello

  · What is the number and the model of the computer?

  · Which edition of Windows you install?

  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

  I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

  "Recovery".
  Your PC needs to be repaired
  File: \Windows\system32\winload.exe
  Error code: 0xc000000e
  You will need to use the tools of recovery on your installation media, etc...

  Press Enter to try again

  Press F8 for startup parameters

  Press F9 to use another operating system.

  It allows me to boot from another HD after pressing F9 several times.

  Any advice would be appreciated.

  Kind regards

  Anthony

  I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
   
  Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

  Choose your language. Click next
  You will now see install in the center of your screen. On the lower left side you can see fix your computer.
  Choose repair.

  You will have several options, including:
  Refresh your computer
  Restore your computer
  Advanced options

  Choose Advanced Options.
  Launch the command prompt
  Enter the following commands one at a time who hit enter after each command.
  Bootrec /scanos
  Bootrec /rebuildbcd
  Bootrec /fixmbr
  Bootrec /fixboot
  Restart the computer once the last command finished

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• Firefox does not send the file entries via iframe

  I know that this is not a forum for programming, but I have problems with firefox while trying to send file entries via IFRAME.

  This is my code

  <form id="popup_form_archivo" method="post" action="'subir_imagen.php" target="wk_iframe" enctype="multipart/form-data">
  <input name="accion" value="subirImagen" type="hidden" />
  <input name="wkimg" type="file" id="popup_prompt_archivo" />
  </form>
  <iframe name="wk_iframe" id="wk_iframe" src="about:blank"></iframe>

  I'll send the form entries to the iframe called wk_iframe, I get the hidden entrance data, but not the entry from the file...

  I don't know why this is happening?, because he used to work.

  Works well in safarin, Opera, Chrome, but not Firefox

  I must say that I love firefox and that's what I'm here...

  Please help me...

  I noticed an apostrophe in action = "" ' subir_imagen.php '. " Is it necessary to cite?

  • https://developer.Mozilla.org/en-us/docs/Web/HTML/element/form
  • https://developer.Mozilla.org/en-us/docs/Web/HTML/element/button

  It should still work as noted in the docs.

  Any errors in the Web Console (Firefox/tools > Web Developer;) CTRL + SHIFT + K) or browser Console?

  A good place to ask for advice on web development is the forum mozillaZine 'Web Standards Development/evangelism'.

  • http://forums.mozillazine.org/viewforum.php?f=25

  Aid to this forum are better informed on issues related to web development.
  
  You must register on mozillaZine forum site to post in this forum.

• The file is signed with a digital signature that is broken, published by: Mozilla Corporation.

  My anti-virus gives me the following message is displayed:
  "C:\Users\MArendas\Downloads\Firefox Setup 13.0.exe"; "The file is signed with a digital signature that is broken, published by: Mozilla Corporation. « ; » »
  Why and what do I do about it?

  Go to your download folder (click Start, click the account name above 'documents' then click on 'Downloads'. Remove it from there.

• File:\windows\system32\ntoskrnl.exe

  I need serious help!

  Some wonder how I deleted some system 32 - files

  Anyway now I can not connect my computer backinto.

  I am running Vista Business as my OS

  At startup, I wonder to insert my disck installation and restart - does not work - also tried repair - same result

  The error:

  File:\windows\system32\ntoskrnl.exe

  Status: 0xc0000428

  Info: Windows cannot verify the digital signature for this file

  Please can someone help?

  Thank you

  Albert

  Heya,

  Here are some links that may help solve the problem.
  http://social.technet.Microsoft.com/forums/en-us/itprovistaannouncements/thread/4ec59ec4-6532-46EB-9861-203ae54e0ea2/
  http://www.computerhope.com/issues/ch000646.htm

• Run Time Error! Program: C\Program File\Intuit\QucikBooks\qbw2.exe.

  I get has: Run Time Error! Program: C\Program File\Intuit\QucikBooks\qbw2.exe. According to me, there is an error of NTVDM.exe code associated with it. Basically, Quick Books will not launch.

  Technicians of quick books it's a poblem Ms.

  Help

  Hello ggkline,

  I suggest you have a look on the underside of Quickbook Forum discussions:

  http://support.QuickBooks.Intuit.com/support/pages/KnowledgeBaseArticle/1004014

  http://support.QuickBooks.Intuit.com/support/pages/KnowledgeBaseArticle/1004014

  He suggests that you install the security update:

  http://support.QuickBooks.Intuit.com/support/qbupdate2007/default.aspx

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• javaloader.exe with bluetooth

  Is it possible to get javaloader.exe to work with bluetooth instead of having to manually connect the device with a USB cable.

  I find it crazy that RIM supports bluetooth, but does not support the same way as USB... bluetooth to PC kind of useless. I could live with that, if I could find a way to use javaloader with her.

  Even if I could simulate a serial port and use the-p option via bluetooth would be perfect.

  Any suggestion is appreciated.

  THX

  -Donald

  No, this is not supported.  JavaLoader does not support Bluetooth connections.

• What code signature down? Or something is wrong.

  I developed BB app for about 6 months now and never had a problem with the signature of an application.

  Until today.

  It's the largest app that I created it, so it might have something to do with it. It is the usual process, that I take

  -Build the application

  -Goto the folder where the application is created, open the JAR file and copy over the cod (in this case, whatever.cod and 1.cod - whatever)

  -Run the program signed by Eclipse

  Copy the JAD and the two COD on my server

  Download OTA.

  Everything is usually fine, but today even after the signing said she is successful, and I get 3 emails, my application says "error AppName from: Module"AppName"is trying to access a secure API."

  Although it is most defintely signed.

  I tried it about 10 times today (30 + signature of emails) and it still does not, even if it has been for months of work. Nothing has changed.

  Is the signing officer down / does not work, or is my big app and how I sign is wrong?

  You have two of your reverse steps. You must sign before handling the COD files.

  Also, make sure that you remove the JAD file before making your build of produciton.

• When I open a window I get C:\program files\mozilla firefox\eula exe; then I don't get any web page

  When I open a window I get C:\program files\mozilla firefox\eula exe; file not found

  Perform a cleaning (re) install:

  • Download a new copy of Firefox and save the file to the desktop.
  • http://www.Mozilla.com/Firefox/all.html
  • Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.
  • Do not erase personal data if you uninstall the current version.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored elsewhere (not in the Firefox program folder) and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• I can't drag and drop files in the trash, error code-43 is detected, what should I do?

  I can't drag and drop files in the trash, error code-43 is detected, what should I do? What is an error code - 43?

  You can't empty the trash or move a file to the trash

  If the above does not help, then see below:

  Visit The FAQ XLab and read the FAQ on the waste problems. You can also try using Trash it! 5.1 to solve the problem. Or you can try this:

  Open the Terminal in the Utilities folder, and paste the following at the command prompt:

  sudo rm - Rf ~ /. Trash

  Press RETURN. Enter your administrator password when prompted. It will not echo to screen. Press RETURN again.

  (Someone should tell you that it is dangerous or useless, please disregard the comment.)

• TestStand - dynamically retrieve a prototype of code module

  Hi all

  Thank you for reading me

  I am currently trying to find little code (if it exists), or some ideas/directions to automatically retrieve a prototype of code module.

  This code can be written in any language (LabVIEW, C, TestStand, or other)

  My final goal is to scan a directory for screws, dll (and so on) and get their prototype in order to have an external database generator module filled code.

  Where there is no such thing as this code, could you please let me know what methods I could interact with the TS engine to retrieve a code module.

  Best regards.

  Hello

  This c# example you will see what needs to be done to get the list of parameters

  SequenceCallModule objModule is step (SequenceCallModule). Module;  Just a note: only if you're sure it's a SeqenceCall
  objModule.UseCurrentFile = true;
  objModule.SequenceName = strSeqName;
  objModule.UseSequenceParameterPrototype = false;
  objModule.LoadParametersFromSequence (sequence); Parameters SequenceCallParameters = objModule.Parameters;

  Concerning

  Jürgen

• an error occurred trying to rename a file in the destination directory code 5

  When I try the installed software on this time its error getting
  ; an error occurred trying to rename a file in the destination directory code 5

  Hi Sissi,

  1. What is the full error message do you get?

  2. This only happens when you try to install a particular program?

  3. using the administrator account?

  Step 1:

  You can try to take ownership of the file or the folder and check.

  How to capture a file or a folder in Windows

  Step 2:

  I also suggest you temporarily disable the antivirus software third and firewall on the computer and check to see if that fixes the problem.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.