File server for Windows does not work after security update

Similar Questions

• Windows does not work after last update of November

  I've manually updated Windows 7 last night (updates critical day of November and other updates) and since it has NOT restarted, automatically, I rebooted my computer this morning.  Since then, Windows begins to restart, but then the screen comes on and off (i.e. flashing) but don't not continue to open windows... What do I do? Help, please.  Thank you.

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your system repair CD. If you do not have one, ask a friend to burn you through the control panel / backup and restore. It takes less than five minutes.
  3. Press a key when prompted to boot from the CD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before the automatic update do its damage
  8. Disable the automatic updates until Microsoft solves the problem. You should see it in these forums.

• my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  my phone does not work after last update itunes on my phone connection with my pc, it shows only i tunes icon and the application of itune on my pc does not work

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  Once iTunes to work properly, you should be able to fix your device.

  TT2

• RDP does not work after the update of the virtual machine tool

  There are many machines these RDP does not work after last update VM tool.

  Hello

  Please replace RDP linked DLL file from any server to work from the same version of the OS...

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• AutoFill does not work after last update 3-6-3

  AutoFill does not work after last update 3-6-3

  is after update

  See control if Firefox automatically fills in forms

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

• Satellite A210 - 19(d) - Toshiba Disc Creator does not work after last update SP2

  Satellite A210 - 19(d), HomePremium Vista 32.
  Toshiba Disc Creator does not work after update to sp2. Error code is 32007C-26-00000001.

  He needs to click ok up to 17 times to eliminate the error window, but it is more.

  Everything was OK before sp2.

  Please take a look in this thread:
  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=60687

  It user pdun459 had the same error using the Toshiba Disc Creator and could solve this uninstall and installation of this new

• Bitmoji keyboard does not work after last update iOS 10

  My Bitmoji keyboard does not work after that I updated to iOS 10 update. I have no idea why, my friends Bitmoji keyboard works fine after that she has updated her phone and mine does not work so I was wondering why. It worked perfectly fine before I upgraded my phone. I was wondering what to do.

  the same problem. He repeats to me go to keyboard settings and make sure that it says allows full access to Bitmoji and it does. Should not have upgraded to iOS.

• Satellite Pro C850 does not work after Bios Update

  My satellite pro c850 cd does not work after updating the bios of toshiba.

  What should I do?

  Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
  Flash the BIOS correctly?

  Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly

  In most cases a special disc of crisis of the BIOS would be required to operate
  Not sure if you can get it repaired by your own
  Check this thread. Maybe this helps:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Otherwise you need help of the authorized service provider available in your country.

• Applications for iOS does not work after update from cli 6.3.0

  After an update on August 3, when the Service of Build upgrade cli 6.3.0 my apps did not work for iOS, I have an iPhone 4 running iOS 7.1.2 and an iPad running iOS 9.3.3. After the build service update, no matter if I specify a lower version of cli, on the iPhone he asked a more recent software when I try to install from iTunes, but the iPhone and iTunes running on the latest version. On the iPad it installs, but the application icon does not appear on the iPad, so I can't access the application.

  Everyone knows a similar problem? I tried to look for documents but did not find any significant syntax change that could cause the problem. I even did a restore on my code (I had an old version of the compiled application and it worked, then I did a restore to this date on my code) and it does not work yet.

  ryanskihead not really, we test with 2 models, an iPad 2 running iOS 9.3.3 and an iPhone 4 iOS running 7.1.2 in both cases, the application does not, but the behavior is different:

  -On the iPad it installs successfully on iTunes, but the icon does not appear on the iPad

  -On the iPhone it says that it can not be installed because it requires a newer version of the iOS, but the iPhone is running the latest available version of iOS.

  If I specify a deployment target, say iOS 7 for example, it doesn't do anything on the iPhone. This and a similar thread I've seen on the target community deployment cli 6 ignorant, I would say that there is a bug with phonegap cli 6 + versions used on the Build Server.

  The problem now solved in time by doing a restore to phonegap cli 5.2.0, TI began works fine after that, so I don't know if there is a bug on higher versions of cli phonegap or there is a syntax change not yet published on config.xml

• DVD Player & touch screen does not work after last update DX1210 to Windows 8

  Hello
  I know. I should have checked the upgrade information before doing so, but I have upgraded to Windows 8 about 3 months ago and my DVD player and touchscreen no longer work. I don't know what else does not work.

  I searched drivers but can't seem to find a.

  Can someone point me to the right direction?

  Or do I restore to original settings - Windows 7?

  Which brings me to my second question. How to restore? I did not have a backup, but I left all my data on a hard drive.

  I can't find any help on any of these challenges.

  Thanks in advance.

  To be honest that I n t have this unit and don t have experience with it but I ve checked Toshiba to THE support page and of course, this model is not supported for Win8. What you need are utilities and tools specific to Toshiba.

  In my opinion, if the device is not fully supported you should go back to original Win7 and supported.
  I put t know why you didn t follow the Toshiba s advice on the creation of recovery media. From my experience, that the recorded data are unnecessary, and you will not be able to start the recovery image installation.

  What you need now is the recovery disk. Visit the Toshiba page if there is possibility to order a new. Otherwise contact the closest service Toshiba and ask if they can help you with this.

• Audio does not work after an update in Windows 8

  I use a laptop HP Folio 9470 m... Last week some update was installed to win 8 and after that my audio is not working properly. Every time when I need to play a song or a movie, or watch something on the Internet, I need first logout, then after logging in first, I need to open the drive. Other wise the audio does not work... Whenever I check to test the speakers, it shows its used by another application, but there is no application by using the audio device. I checked all the drivers, and everything is right in there... But I don't understand that either the app using the audio device in the background... I even reconfigured my system, suspecting it was a virus. But after installing the operating system first two days, that it worked fine, and then a few updates got installed, now return to the box starting... I can see the updates which has installed, but cannot identify the one which may cause this disorder...

  One, any help is deeply appreciated.

  Thanks in advance...

  AG.

  07/11/14 - the problem is caused by the updates of security KB2964736 and KB2965788, which has turned off the sound from the speakers and output microphone of my VAIO laptop, as well as all the features in iTunes.

  I was able to determine that, because now, I manually install updates after the last problems caused by automatic updates. Having discovered this problem, I did a system restore to before the updates to get my sound back, then I manually created a restore point individual for each update before installing. It was a frustrating and time-consuming process, but I could locate the defective updates that I've now hidden so that they will not download on my laptop.

  07/12/14 as a result of writing the earlier yesterday, all sounds had again been disabled when I started my laptop this morning. I did another system restore before installing updates security yesterday (KB2965788, KB2939576, KB2964736, KB2957189) AND my sound back. I've now updated iTunes with the latest version in the hope that this stops the residual fault caused by security updates and I will keep you informed.

• Pavilion dv7-4270us: dv7-4270us bluetooth does not work after driver update

  I recently updated my drivers from the HP website.  Now, I know it was a mistake that bluetooth has not been installed correctly.    And there is no option "driver restore.  I tried several times sp50180, according to the HP website and also tried the old version listed (sp49153).   They old version did not install correctly and a new seemed especially, but none of my Bluetooth devices that used to work to do now.   I can 'connect to' some devices but they cannot transfer photos, connect to the audio, etc.  Some devices that are used to work can still be seen when I say "add a bluetooth device".  After installation, in the Device Manager, I find the following:

  The radio Bluetooth: Bluetooth Broadcom 2070 and Microsoft Bluetooth Enumerator (both working properly)

  Human Interface Device: Bluetooth Remote Control (works)

  Modem: Modem Standard via a Bluetooth #2 link (works)

  Network cards (all working correctly):

  Device Bluetooth (personal area network)

  (Heading RFCOMM Protocol TDI) Bluetooth device

  (and my other network devices, all functioning properly also)

  Other devices: this is the problem area.  After installation and reboot, I always find myself with 10 entries "Bluetooth Peripheral Device", all with a yellow exclaimation mark and all say real estate "Other devices", "unknown" (GSM) and the location is "on Microsft Bluetooth enumerator". "."

  I tried right click and uninstall it, but when I reboot they come back to the top, search windows update, but can not find a driver and go straight to the "other devices".  I also tried to uninstall the "Broadcom 2070 Bluetooth 3.0" 'Programs and features' and right-click to delete each listed above bluetooth driver and then run the sp50180 again and it will install without error and find the same above drivers that work and leave the same 10 does not.  And my Bluetooth headphones (two different ones) is more work (or can be seen) and my Bluetooth phone can be 'connected' but any attempt to transfer fails.

  I've exhausted all ideas on the web, I could find, and none have helped.  I tried to load a restore point, but after having so many pilot facilities, there is no point of restoration with the appropriate driver.  A full backup of the system on another drive, but much changed the applications and data files so I cannot restore it.  Unless someone knows how to use a full backup of the Windows 7 system to restore only the Bluetooth driver.

  Another idea is that the driver update that messed up things maybe changed some other file or a registry setting that is not corrected by sp50180, but that seems unlikely.

  Is it possible to manually install each of the 10 'other devices' drivers?  If I right click on a defective device and select "update driver software" no matter if I select the drive C:\ or F:\ (my driver and software download drive) or automatic search (including online) - it does not find the driver files.  I also tried to select properties and 'put to day driver' but the same results.

  Any help would be greatly appreciated.

  I found a solution. I received a call of support in Mumbai.  HP gave me a free call because they were not able to set a guarantee repair questions, so gave me the free support call.  I took an hour, but ended up the solution was very simple.

  There were these problems:

  1) 10 'other devices' in device with the exclamation points Manager can be uninstalled, but still were automatically reinstalled with the same exclamation point.  No pilot was available to the public for them.

  (2) my phone under Bluetooth devices could connect but would not photos transfer.

  (3) neither my helmet Bluetooth would not work.

  The solution was simply to go to 'Show Bluetooth devices' and right-click on each and select 'Delete device' (even if dimmed they might still be revoked).  After all have been abducted there were no "other devices" in Device Manager.  I then added each Bluetooth device again.  This was very well all work.  I also noticed my phone was five drivers "Bluetooth Device" was so 5 of the 10 exclamation points himself.

  For some reason, deletion of the driver in the Device Manager has not deleted the list "Bluetooth Device".  And by uninstalling and reinstalling the drivers, it does not work.

  If the answer is simple.  Before removing the drivers Bluetooth first remove all Bluetooth devices.

• Monitor does not work after restoring update

  Hello. I have a problem with my PC. My CPU is on but the monitor shows No Signal box. Previously, this problem seems too. But I fixed that by cleaning the RAM access (or other) Point. But this time, this method did not work. I have clear the CMOS, but the problem still not fixed. Oh yes, this problem occurs after the update. When updating, the update has failed and come back. When I start the PC again, nothing is displayed and there is no sound signal. Help me please. My characteristics are processor i3 Intel, ATI Radeon HD 5550 2 GB, DDR3 RAM 2 x 2, Windows 8 Pro 64 Bit.

  Hi Chloe,.

  Thank you for the update.

  I understand that since the DVD burner does not work, you are not able to create installation media.

  Put a USB installation media option. You can use both links to download and create below

  Update Windows with only a product key

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  Here are the steps:

  1. download and open the Setup file install Windows 8 Microsoft from the link above.
  2. Enter your product key of Windows 8 and start the download.
  3. once the download is complete, select install by creating media.
  4. Select the USB flash drive (it should be the default choice) and insert the USB key.
  5. accept all prompts to clear the contents of the USB key in order to start the process.

  

  

  

  

  

  Let us know if that helps. Keep us informed so that we can help you further if necessary.

• Satellite L735-103: one key does not work after BIOS update

  Hello

  I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
  I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
  I have a plate with windows and linux, and the result is the same.

  Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)

  Hello

  Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
  Have you noticed the anomaly key immediately after the update of the BIOS?
  You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
  Here, you can set default BIOS and then save the changes.

  If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

  To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:
  http://EU.computers.Toshiba-Europe.com--> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).