file sharing strange behavior

Similar Questions

• Users 'Windows file sharing' strange.

  Hi guys,.

  What is c? I checked the list of users in the terminal and each is named. How can I track these users with empty name and delete them? Any ideas?

  

  Also I found them here.

  

• Strange behavior file open/create/replace

  Hi all

  I will make my question as broad as possible because I think someone must have met this behavior before. I use the function open/create/replace file to programmatically open a file, giving a path entry created in an earlier vi. Strange behavior, I see, is that although Labview returns 1 error when I give my file programmatically, it reads the file OK if I give as a constant. The constant path that I give is exactly the same as one I am tryinng to programmatically.

  Any suggestions? Is it to do with a string formatting problem? I enclose my portion of treated VI the path_in section.

  Thanks for your time,

  Kind regards

  Harry

  Wild guess: you must use 'build path' instead of 'concatenate strings' build path.

  (Also use a constant of diagram of the path (not a string!) to "c:\ni-rt\" and get rid of the "trim whitespace' and the 'chain of path")

  See if that makes a difference. (build path is OS independent, while the operations of independent channels are not).

  Never use the paths as strings. There are very few cases where this would be appropriate.

• Bug report: strange behavior with sharing folders Mac & PHP require (8 VMware)

  I'm using VMware Fusion 8.0.0 (2985594) on Mac OS Yosemite (10.10.5 (14F27)) and I have a Linux VM with Debian Wheezy (3.2.0 - 4-amd64) and PHP (5.4.41 - 0 + deb7u1).

  After I've upgraded from VMware Fusion 7 WMware Fusion 8, the (open source CMS) Typo3 on my development machine began to throw PHP syntax errors during playback of its cache files. As I investigated the problem I found that the behavior is reproducible, but only when the files are written to the folder that is shared between the host system and the VM.

  When I'm demanding a PHP a certain file size and a certain name of file, PHP seems to continue reading about the end of the file in the middle of the arbitrariness of other files. This leads mainly to errors in syntax PHP - but according to the name of the file that they differ, for example:

  PHP Parse error:  syntax error, unexpected '' in require284.php on line 93
  PHP Parse error:  syntax error, unexpected '' in require107.php on line 88
  ^[[APHP Parse error:  syntax error, unexpected 'p' in require472.php on line 88
  PHP Parse error:  syntax error, unexpected end of file in require884.php on line 88
  PHP Parse error:  syntax error, unexpected 'u' in require185.php on line 89
  

  All of these errors are generated by requiring the same content with different file names. If I am demanding the same file with the same name, the PHP error is also the same.

  Steps to reproduce

  I wrote a PHP script that seeks a different file names for a given text, until it crashes. Store this file in the shared folder and run it with php f. As you can see, all the content of the file is commented out, so it shouldn't affect anything.

  <?php
  $content = <<<'EOT'
  <?php
  /*njsRtWyvEHREGDwjZEIuuwOCJidhxoMo
  lsdTFPMPhCnHYdjylYmAlJtOrNQRZRzFDQsX
  QAYugjeSRojQLImGMsGzvsNxSdbvIUZbHvVuXfDTJqyXxjbiNoMgiQGVlREJPPacTIbn
  emIhHyATFwSAHnoTRVtUppVVRoWHDAjMvkoADVBCTJFNT
  aCUTsQsZbIhyaQoSCWcpuhgPcoWBD
  bXzAuYZueusNALsxIYTpkaHGGwmLkdkEPsQRSyPojOhCTUksYnAdlr
  rDfHEzqctbHpFBQkUTOWgYsYKwBzguuNxktJDitUkSDLABoDjYlrQzmtBxRU
  TRZqbDEgTEGqpFAXbCADhmwVltDJGqvsasypalIThuzA
  VDJkyuQAQYJoiTyuoMtjeoXtZMVZKhWxWGbChTZjVWcNX
  ANAKXbsERdugbcApTEjabtRSBvMAjreOdSbCyqBikXMADmzTyIijEwBYhWXzEIQHVn
  LkasQDaUvNBNJghMrpNBBnqqLaUsoxqjDoGUoQjG
  uMQEbeYxRcQSICioqjMOLMZZhUbFTOOLdsGHrVSlk
  IxnyGZMFpCNRqFBOYSbSbyzqhzZyjrkUzjEPXSoZNnbnNsdHVdUKosgpVCDSakQjEgNmUM
  vmusESUYiXPKKqvPfVghfqmTniFjPUorDvEpGGvRaKln
  vrQGhLncjvcGQRBWVGKQQVDfbCPRYrJkUTvLpWfIQscGq
  eaZkNjlIfWCYaWMIHPjUkQNYtEdoJbTCYbHqmQYnaIEsVrYXiqibBWrZIFdcyGdCqLRaW
  KjYicadGOioWoiYJrrfUjdTwKhNnhppkjhXZdUmWMxfiqetHCVvZfrKieR
  yhRbxbgbeORKMVxFmLmTexQhALUTNkOGhjaESxabCZSbcMlNLhz
  QnRzjUstpUDJpAcRLSjpPGSwaPKaVqdXrlXsHRtCFpbaEhocTxUAgPKwFvTskukCbCItNS
  vSDsuvlhCtMwYLOQRaJkSfbCaSlUsKZLVnuESjFwiAuJvIumSiCAHYBjpOFWvS
  pPRnkwaQCgYUtrHujVaEvxQ
  NtmJNjkSoCTvMzLXvmDBnymC
  pddMGqTojVadloHtRkipEFiZrWIsCXaqdayQWzynSiXtBIjesEguDtIfmd
  ZmkZrfNbXmtaUiOBvVvKmFaHePX
  CVCGMVGYjzjXyELANgIyAcsjfvdaGdDEttAofjawnondQuScwBUrAUdYxxerNG
  llGfZwYymZrykyajgjRGkDMpREVsybITgbTlgfhJUWJgGAtEM
  yskdfRkKDBaSfgSgLpKgQBmHybHxo
  EMlIkmGTopRdwcNxzLZigZxhakIcdGtlXVrEyPEgrxzG
  wxEFZcpSvgNUsiEVKZsdWGnSFiypJLvRnBUPGNa
  crmUUXjOENCuxstveIQFfhZYLmUljXEMIkH
  pBpmdMAMuBmTWlYZHOgxnPxQeHpMnTDnQRTmBRpoSRHZABhiQO
  qGksOOcpPKfcKhpdQVDvOcUzjsHIrIUSndRreDHdMtxmorrfaUyNmvuS
  uzQQlEcZXpaILAbCXblyXNQxARvGcRSyXDdAwZuBACpQJkZZNBJSkf
  ptcApSlflVBLBxGGtQLBWgoLciHHZsgixDFWqejANmDqiVWhGwQzQKpcNPH
  KIWUpmzHnUVBNBJCxaQKsy
  lRQCfqSWaiqkpyKmodooVOlEcmiUfElZhoDwhWnivqeEqWOEEJRRlbAPdlAJioAXBZpTXc
  pUzpJRxevfDotRbgqCtdzqIXrCahDDnLqymyREXzAvmMniQghmwbMIdnprCsdpxtsvGplq
  ArYJDZfLGhQVEyzwnPyavPgdvbpIKQyTCwgjiZuQUPQumlcKllkDRfErLLqyNGrLMHBpzY
  biPHNtPYGjrYztLOYhaoPmyVahPtiojqptGVQwbKmrFiqNfSv
  nnHyvOuEgLWZxCfrfmAbCspFUYMugmGZZlXFMSYfUlOQxcsOxpSUOEfvI
  ztnBZJKMbEoQZfRzbnQkUXC
  kXEEPviTpYGNrikuJbkfXSyALJmFIzmVamWouZqAwGanZFCSiN
  AVUDwCPZWUJNIrmUwpaoSWTGKmtkev
  uaKSTGLYHTvKAFQRFnMbCBEJQbpgrxOUYTTLGExcQokfKVmEhaCjK
  xBqwGyJyqvscyLMQlsgzfXnIKUZZZfNwsu
  IVwNskHoJTBrRMtKTaxcgoKyUEVONWywwxKbCMMqcw
  aryEooyClPfmWeLRdMGcIDUhWKMztUQrsQmKwTVVXUOxZnMwxr
  PuKuPRLLYsvbvUUIXNVSkdITWLTOmCQrbFEArsfwpTIQYmRNPDLvJheP
  HFSyzYzvuVUQHsahuUQqiPBaDEYJuiySqZfVYPqsaKEm
  aNsbVyGFRpNREYAcFoFLbCNRa
  jQfdxcrOqGHQkcuqGxTMHoGSgAmVAxpPMmhtwRUCKshdXLNnggmuOhgbClYbUzmiBwQ
  UOcNuUNpmEJwDHGpQLEHzIrFlJlEJALIhQyEpYgcVzsmHIffBBpbhnidaK
  SIjqXPyiGTTCUSCZdqZcXOUVCGgAZZuzgpVpjVYkRArhZgHNc
  pbjeIcbCtYZKhvCdxRSVloKVDGXLYqnbjBJZtieEGYprYWtDRH
  pDIELcriTtSXVsTnHBboDfxHJemyOwmPqCDjJjdFsm
  wUKVYearKMHOwWgptjVJAEresgHifdhkdQdKfrYXJUrtyXqTDUbYOjCsCOEnoWZJDiFt
  JmzMKbzvfZDmhFHRnMATdBOcFOiicGGTYEQhvKjazZNgXTP
  abtSIvcZpQXNDiAIBIRkwOKqLjemQjUHywrfCHNxCNRmMosAOGTHEzCqNfcxQQmTvUx
  puCzHyJacoGHtUDhVLDlcCXBytJpJDOIEUtDcWxENdHXfhGaRnfJKZpOsRaEstLopUBoUv
  vWJvmIRLprUJlMiNqdrPD
  PrXisnQvcMbmZwMrgaZcJcIuFlpuJXwtzasYQHUrTinNtXJYxKftihuApOxUFpSxyjqbWW
  CqHRWXTrsTIuXEZbjNCEwhPNAZoqlAoQD
  XWanteqzjVEzbBIhCEeWsnjdzCWORDAXfPKvJZIfb
  qMHQasPmLItsTsxijJrkQbaowAPjJyasyilAYTwSg
  wefnnxtBFkoYMEXoZiYdKtEqoGtnymFqkvuLHxOmv
  bNjqEWbtxaioqkYPmwXKaqAxQLHJHmJTfJBZymDLvx
  obVmpstUZETvYISUiqySvemOXCzjuWGvfgC
  FKJCBTIdSbbnlvKIkBqbMhAhwkAQMexej
  oWBdyunrwxJuWtHsLtIcveTYmCATjiEDoZuggrAxlQhjlUMtMYR
  TqkWuIblrRzKHhNWaGPOd
  ouYgqSMhhngaisNrySZEoJuZrFXHlfPqfWoEZzOiqMqilx
  sQOTKTweognuFhfrluhjAXa
  PqplUMYbKtCvcHYhpcgShKmulTWLprLohwqAWMNyTcNYZJFcWtn
  UwOXvcdCeJiQrEsCycJwSyZJqrsaiSVFcPOMQKCJqRhfAgBmmgDvdsFUIqHWiagR
  wjRmbEIMrDpJXKqGRndpTUfbpjwlpmBtUOIbdngG
  MmItcEisVEgXUnnvEiTIhMPRazVFEplnBfYQWqLMi
  HGZZdDnjVLjluFnDlFLHWseOeJXSFjrfBUXLcIoITqozfHolhIdCmHUsKKYtnng
  FrlAfGIMXlQRYfsaigOJABjLRknqdIbZlZVcLOqjKYmPcjrHH
  SLrsFrNInZMHVeWJHPKwGFKNapGNMgXFqtPOdB
  KExsWUQXnoORsjShtiRRCTYSKwSAhQjgZbzwRHTsiWGIukdOD
  PJKBKqUvyQvWlsrJENAeNLiVTDapsYAnqQwYFuskUVaWHtditUJpiFVsJwKytWu
  aihAvXNVkxTqixFtPumJDocWAmvocxDHZtUzCcEoFHdwFzclKlAdfLOuhZgqZDTptmXii
  DgYmqpKdlbCtenKLhAVrWmJuDofoWpCPHWYdtjXZiYajKuFh
  GGyFSgSVkGRwVakkZafdGvOMHalwDyeOZY
  oFrLUGOVbaHClgsfLepNpHagKdPzLGnilQUAbPyiSrVcIiJaChvlYOIIWWPRPl
  
  */
  EOT;
  
  for($i = 0; $i < 1000; $i++) {
       // generate a random number
       $rnd = rand(0, 1000);
       $filename = 'require' . $rnd . '.php';
       echo "Try no. $i, filename $filename\n";
       // write the content to $filename
       file_put_contents($filename, $content);
       // require the same file
       require($filename);
  }
  

  I wrote another script to generate the build the combination of text and name of the file that is causing the problem:

  <?php
  
  // the decimal ASCII code of all upper and lower case chars
  $ascii_alpha_chars= array_merge(range(65, 90), range(97, 122));
  
  // how many tries
  $count = 500;
  
  $out= '';
  for($i = 0; $i < $count; $i++) {
       // generate a random number of files
       $lines = rand(70, 90);
       $out ='';
       for($j = 0; $j < $lines; $j++) {
            // ...and a random number of chars on each line
            $rand = rand(30, 70);
            $out .= get_random_chars($rand) . "\n";
       }
       write_and_require($out);
  //     echo "$i\n";
  }
  
  function write_and_require($out) {
       // write the content to a file, require it, and delete it
       $sourceCode= "<?php\n/*n$out\n*/\n";
       for($i = 0; $i < 50; $i++) {
            $rnd = rand(0, 1000);
            $filename = 'require' . $rnd . '.php';
  //          echo "$filename\n";
            file_put_contents($filename, $sourceCode);
            require_once($filename);
            unlink($filename);
       }
  }
  
  function get_random_chars($n) {
       global $ascii_alpha_chars;
       $out = '';
       for($i = 0; $i < $n; $i++) {
            // add a random char
            $out .= chr($ascii_alpha_chars[array_rand($ascii_alpha_chars)]);
       }
       return $out;
  }
  

  This problem occurs only for the upgrade of VMware 8 and only when the script runs in the shared folders, I strongly suspect that it is a problem within the VMware stack.

  Can anyone elso reproduce this behavior?

  Hello

  If you use the kernel of an open-vm-tools HGFS customer then yes there are bugs because the version provided with that was broken and not tested. People has not listened to my complaints about it.

  Current recommended approach is to always use the installation of VMware tools for the shared folders feature.

  Open-vm-tools are used to install tools user mode only. We try to make all of the features available with these, including a file sharing client FUSE based. Version 10 of the open-vm-tools will have this.

  Stick with VMware tools install for now for file sharing.

  Thanks for your great art information and debugging this issue.

  Steve

• File sharing sharing too!

  I have a strange problem with file sharing.  I fully share a folder, but when I find the Mac that shares the record of another Mac, I see the folder, I shared * AND * I see all the home from another account of shared user-directory and the shared directory is * writeable *.  I don't understand why this is happening.

  Details:

  I have a folder ' / users/shared/Scanner Inbox "I added under file sharing (System Preferences |) Sharing | File sharing).  See screenshot:

  

  When I have my MacBook Pro's ' MacMini' eyebrows, I see "Scanner Inbox", but I * also * see "wasserham", which is the directory to one of the accounts to log on 'MacMini '.  Here is the screenshot of the MacBook Pro, MacMini of navigation:

  

  I am not even connected as user "wasserham" on the MacBook Pro.  This is not sensible.  Can anyone offer some advice on what I did wrong, and how I can stop this insecurity too share?

  Thank you!

  It's normal when you log in as administrator on the file server.

• Slow connection to SMB/AFP file sharing

  Configuration:

  OSX 10.11.3 (15 D 21)

  Server V5.0.4

  Running services: calendar, file sharing, Manager profiles, Time Machine, VPN, Web, Wiki, DNS, FTP sites, open the directory

  We have a problem which has lasted for several months where clients that attempt to connect to file sharing (AFP or SMB makes no difference) takes too long to authenticate. He constantly takes ~ 40-45 seconds to open a session or even reject a bad password. The really strange part is that it affects all computers on our network with the exception of a Mac Mini. Seems not be customer specific, i.e. all users connect without delay on a Mac Mini and slowly on other computers. I was not able to determine differences in settings of network connection or on different computers, but I don't know there are parameters, I'm not aware of that.

  Did someone met with something like that?

  Thanks in advance.

  The faster connection Mac Mini there the active local folders?  Or using a faster SMB protocol?

• Strange behavior with the function «Help in command line»

  So I do a little playing with the opening of the files compiled help (.chm) with the command-line help feature, and I saw a strange behavior when trying to index multi-level access keywords. According to the documentation, if you set the 'Key' operation, you can enter a value for ' string to search for "to access this section. The more precise help that:

  If this string contains a keyword index, the string must match the key of the index as it appears in the help index file. To access a topic with a multilevel index keyword, enter the keyword of the top-level index, a colon and the keyword of the second level index. Do not separate the elements with spaces. For example, a chain of error codes: GPIB jumps about a subject with a keyword of top-level index of error codes and a second level keyword index of GPIB.

  All right, seems simple enough. Except that when I tried, I couldn't work, even with the example provided. I tried the following simple test:

  

  Opens the help file, but it opens to this page, not to the page ' error codes: GPIB "non-descript. I saw this in 8.2 and 8.6. Anyone have any success with access to a multi-level keyword?

  Note - side

  Curiously, the Index for the help lvconcepts.chm file looks like this:

  

  In other words, the input index text is just "GPIB", but the text that appears in the keyword field is "codes error, GPIB. I'm curious to know how this was accomplished. I decompiled the lvconcepts.chm file and watched the .hhk file, and it is not immediately obvious to me. (By the way, if you try to use "error codes, GPIB" it does not either).

  Hello

  Please contact National Instruments!
  It is a very strange behavior.  I tested out and seen the exact
  same results you are experiencing.  This was reported to R & D (AUTO ID # 130246) for further investigations.
  From what I can tell the a possible workaround solution that we have documented
  in the post of root Canal.  I can't continue to look into this in order
  to see if there is no other workaround solution or a reason why it is
  run in this way.  Thanks much for the feedback!  If
  you have any other questions on this subject please post them here.
  Have a great day!

• need to disable simple file sharing?

  I have a hard drive of degeneration neurofibrillaire and I went in ' folder options > advanced options ' on an admin account and the simple file sharing to disable bullet isn't there, I went on my other computer and this is, any help is appreciated thanks

  I have a hard drive of degeneration neurofibrillaire and I went in ' folder options > advanced options ' on an admin account and the simple file sharing to disable bullet isn't there, I went on my other computer and this is, any help is appreciated thanks

  Strange, but this article states: Note you cannot disable simple file sharing in Windows XP Home Edition.

  How to disable Simple file sharing in Windows XP Home Edition

  How to use Simple file sharing to share files in Windows XP

• Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

  former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

  My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

  Hello
   
  1. the options apply automatically on?
  2. have you made changes on the computer recently?
  3. have you installed any Alltel Wireless application to manage network connections?
  4. What is the current network location type on? Is it home, work or public?
  Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
  
  Method 1.
  I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
  Or you can disable the antivirus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Network discovery and file sharing will not stay

  The bar notification on the screen of the network in Windows explore said that discovery of the network and file sharing are turned off and click to change. After a right-click and by turning on the network discovery and file sharing, the notification bar appears again and said the same thing.

  I have ensured that the services are running, and appears not to have solved things. I am able to ping other computers that I know are on the network.

  I didn't have this problem until a few days ago, and the strange thing is that I am able to access other computers on the local network via the \\computername method. However, access my computer from other computers or devices miss you

  Any help would be greatly appreciated. Thanks in advance.

  I realized that guys on my network have not been able to ping - me, so I did this:

  http://superuser.com/questions/375100/what-happened-to-my-predefined-rules-in-Windows-Firewall-how-can-i-get-them-b

  I activated adding predfined advanced and enabled firewall rules all incoming and outgoing in the file and printer sharing. Now, everything works fine.

• HP Pavilion Slimline s5304y strange behavior and stops randomly

  To start, here is my card:

  HP Pavilion Slimline s5304y

  Windows 7 Home Premium 64 - bit SP1 Build 7601

  AMD Athlon II X processor 2 215

  4 GB of RAM, blah blah blah

  Here are the symptoms:

  -Win7 starts to act strangely, when the keys are depressed they'll keep recording (like that, but forever)

  -Then it will attempt to force the closure but I keep open Word 2007, which will block the closure and I gives me the option to cancel or to force stop word.

  -J' I usually Cancel to see what it does, sometimes it continues to operate normally, sometimes, attempts to stop become more frequent until it ask no more, and Word cannot veto the shutdown request.

  -When I look at the Event Viewer system, he says he is told what USER (me) has launched the stop, as if it were normal.

  -A little more digging in the event viewer application section says that before stopping, "HP Support Assistant Service" had a "PowerEvent handled successfully by the service" with EventRecordID of 10883.

  -Meet system Event ID 109

  Microsoft-Windows-Kernel-Power

  EventRecordID 45150

  -Meet

  "The process C:\Windows\System32\winlogon.exe (USER) has launched the power off computer USER for the user NT AUTHORITY\SYSTEM account for the following reason: no title for this reason could be found.

  Reason code: 0x500ff

  Type of closure: power off

  EventID: 1074

  [Qualification] 32768

  There is no indication that something went WRONG minidump, no discharges of any sort, sfc/scannow ran own just like chkdsk, memtest, tester of windows 7 and all other diagnostic tools.

  He did it before, but very rarely, so I thought nothing of it (which happened in the spans of the months apart) but now happened several times a day.

  Recent software additions:

  Installing the software and drivers Lexmark Prospect Pro205

  -Updated Nvidia graphics drivers Geforce 6150SE nForce 430 to 8.17.12.9573 and it's Helper service ver 295,73

  What I did to try to rectify the situation:

  -Scanned with each virus/malware free scan in existence - deleted an infected file from Java Java/CVE-2011-3544. O operate. And another unrelated to the advertising program.

  -Updated HP Assistant and Advisor

  -Updated several times with various updates for windows 7

  -Clean the case thought it was overheating, but nope - clean as a whistle, normal running time

  -Good fans checked

  -Extract from food - looked good, constant voltage

  I haven't checked the power extension cables. I heard there is a problem with shorting out on the 24-pin extensions, but I didn't have an extension of 24 pins on the power cables.

  I've heard others have had problems with HP stopping randomly with a strange behavior, so I wanted to see what you guys have to say.

  Could this be problems of power with my house? The wiring is old... Or more likely is a short circuit in the cable/PSU?

  How can I easily repair/test of this theory?

  -All right, so the system restore has nothing but destroy some files, because I couldn't not correctly backup the drive between the random stops.

  However, I found the solution to my problem, that you won't believe.

  Short answer: I replaced the stock HP keyboard (model KU-0841) who seems to have been short.

  The long answer:

  -When the computer kept shutting down even in safe mode after a destructive recovery, I started watching again material.

  -Noticed my typing would sometimes record, sometimes just go crazzzzzzzzzzzzzzzzzzzzzzzzzzzy (like this).

  -Then comes the keyboard no longer works. Thus, while the veto stops with WORD 2007 and using the keyboard on the screen in Win7, I thought it was a terrible virus - it wasn't.

  -When I unplugged the USB keyboard it's a strange electric 'bzz' sound, like what you hear when static is unloaded. It turns out that the USB port has been be short-circuited by the keyboard.

  On the keyboard and the USB plug was going well, so I don't know who is to blame again, however - if someone is having the same weird problems with events of the power of the nucleus and 1074 with 0x500ff errors-try to check your hardware.

  After replacing the keyboard, everything works perfectly.

• Strange behavior of the browser blocks SQLDEV DM

  Hello

  I feel some strange behaviors in the browser of Datamodeler.

  After the opening of my model

  I have doubleclick in the window of the browser to fetch a few properties of the index:

  Drawings and models > MyModel > relational models > my RelModel > models > Oracle Database 10g > Tables

  So far, everything that happens.

  -I can select the tables and

  -doubleclicking shows the properties of the table.

  -I can scroll vertically

  -Select other tables

  -open and close the subtree of this physical tables

  Now, as soon as I click on any 'more' in the physical tables (for example, the index node or node of the plate) the browser "tri-de gel".

  The tree is distorted, scrolling seems erratic and it is impossible to select. Most of the time the main menu is also distorted.

  If I make the browser window, most of the time I'm able to hit the "file > save" from the menu. The model seems to be registered properly.

  No damage seems to have been done to the template on the reopening

  I'm on Windows 8 pro with the 64-bit version of datamodeler version 4.1.2.895 (from datamodeler - x 64 - 4.1.2 - 895.zip)

  Any ideas anyone?

  any response greatly appreciated.

  concerning

  Wouter

  Hi Wouter,

  I'm sorry, this is a bug and we are preparing a new version with this bug fixed.

  If I make the browser window, most of the time I'm able to hit the "file > save.

  Close the Data Modeler (X - close button in the upper right corner) and it will ask to save the drawing it is changed.

  Philippe

• Shape the strange behavior - Bug?

  Hey there, can anyone explain this strange behavior?

  After Effects CC 2015.3, Windows 7.

  Create a form, just STROKE-> convert to a path and simply animate the path...

  Watch the video:
  2016 09 23 19 48 25 253 - YouTube Bandicam

  Thank you

  Try this. After you convert the rectangle to a Bézier path select the pen tool, hold the tool Ctrl/Cmnd to change from the point to add to the direct Selection tool, drag the selection over the left upper point Bezier path, click right and choose the mask and path of shape > define a first Summit.

  Now animate your side and everything should be fine. The problem is that it seems to be no first vertex set when you create a Bezier path from a form. This happens with all forms converted into paths. If you hold down the Alt/Option key when creating a path of a shape tool a Bezier curve is created instead of a parametric form and the problem does not exist.

  I'm going to file a bug report.

• Strange behavior with V$ PDB and CDB_SEGMENTS views of Oracle 12 c

  Hello

  I am trying to run a query between the CDB_SEGMENTS and the views V$ PDB on the container ROOT, but I have a strange behavior:

  SQL*Plus: Release 12.1.0.1.0 Production on Fri Sep 6 12:33:25 2013
  
  Copyright (c) 1982, 2013, Oracle. All rights reserved.
  
  
  Connected to:
  Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Advanced Analytics and Real Application Testing options
  
  SYS@orcl12c 06.09.2013> show con_id
  
  CON_ID
  ------------------------------
  1
  SYS@orcl12c 06.09.2013> show con_name
  
  CON_NAME
  ------------------------------
  CDB$ROOT
  SYS@orcl12c 06.09.2013> SELECT B.NAME
   2 , A.CON_ID
   3 , A.TABLESPACE_NAME
   4 FROM CDB_SEGMENTS A
   5 INNER JOIN V$PDBS B
   6 ON B.CON_ID=A.CON_ID;
  
  no rows selected
  
  SYS@orcl12c 06.09.2013 12:34:17> SELECT B.NAME
   2 , A.CON_ID
   3 , A.TABLESPACE_NAME
   4 FROM CDB_TABLESPACES A
   5 INNER JOIN V$PDBS B
   6 ON B.CON_ID=A.CON_ID;
  
  NAME CON_ID TABLESPACE_NAME
  ------------------------------ ---------- ------------------------------
  PDB$SEED 2 SYSTEM
  PDB$SEED 2 SYSAUX
  PDB$SEED 2 TEMP
  PDBORCL 3 SYSTEM
  PDBORCL 3 SYSAUX
  PDBORCL 3 TEMP
  PDBORCL 3 USERS
  PDBORCL 3 EXAMPLE
  ...
  
  23 rows selected.
  
  SYS@orcl12c 06.09.2013> SELECT *
   2 FROM TABLE(DBMS_XPLAN.DISPLAY_CURSOR('asa03y45g99zb'));
  
  PLAN_TABLE_OUTPUT
  -----------------------------------------------------------------------------------------------------------------------------------------------------------
  
  SQL_ID asa03y45g99zb, child number 0
  -------------------------------------
  SELECT B.NAME , A.CON_ID , A.TABLESPACE_NAME FROM
  CDB_SEGMENTS A INNER JOIN V$PDBS B ON B.CON_ID=A.CON_ID
  
  Plan hash value: 3590150304
  
  -------------------------------------------------------------------------------------------------------------------------------------------
  | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Pstart| Pstop | TQ |IN-OUT| PQ Distrib |
  -------------------------------------------------------------------------------------------------------------------------------------------
  | 0 | SELECT STATEMENT | | | | 1 (100)| | | | | |
  | 1 | NESTED LOOPS | | 333 | 14985 | 0 (0)| | | | | |
  |* 2 | FIXED TABLE FULL | X$CON | 2 | 30 | 0 (0)| | | | | |
  | 3 | PX COORDINATOR | | | | | | | | | |
  | 4 | PX SEND QC (RANDOM) | :TQ10000 | 167 | 5010 | 0 (0)| | | Q1,00 | P->S | QC (RAND) |
  | 5 | PX PARTITION LIST AND | | 167 | 5010 | 0 (0)|KEY(AP)|KEY(AP)| Q1,00 | PCWC | |
  |* 6 | FIXED TABLE FIXED INDEX| X$CDBVW$e7cdf8a6 (ind:11) | 167 | 5010 | 0 (0)| | | Q1,00 | PCWP | |
  -------------------------------------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
   2 - filter(("CON_ID">1 AND "INST_ID"=USERENV('INSTANCE')))
   6 - filter("CON_ID"="CON_ID")
  
  
  25 rows selected.
  
  SYS@orcl12c 06.09.2013> select con_id,count(*) from cdb_segments group by con_id;
  
   CON_ID COUNT(*)
  ---------- ----------
   1 5795
   4 4397
   3 3923
   2 3401
  
  4 rows selected.
  

  Basically, I would like to display the container_name of segments within all PDB files, but the join between CDB_SEGMENTS and views of V$ PDB does not work (lines 20-25) pending the join between CDB_TABLESPACES and V$ PDB works very well (lines 29-34). I've posted the execution plan (lines 50-82).

  You have ideas about this behavior?

  Thank you in advance,

  Arnaud.

  Hello

  Not 100% sure that this is a bug or just something about the way containers works now - however this select seems to work OK:

  SELECT B.NAME, A.CON_ID, A.TABLESPACE_NAME

  OF CDB_SEGMENTS, V$ PDB B

  where to_char (B.CON_ID) = to_char (A.CON_ID)

  See if it works for you too?

  See you soon,.

  Harry

• Strange behavior with the PSD in Photoshop

  I am currently working with a two-page ID CS5.5 document. This is a CMYK document with CMYK images and grayscale.

  Strange behavior is the following: I have a gray levels (tiff) image that is repeated on the page 1 and page 2. This image looks completely different from page 1 to page 2. I have triple checked everything (opactiy, effects, etc.) and then I started to remove items from page 2 one by one.

  As I deleted a psd file all of a sudden all the images in grayscale on page 2 changed his appearance to match page 1. The PSD in question is also in CMYK with a transparent background. What the frack happens?

  I'm more concerned to know if it makes a difference when it goes to print, or if it's just weird screen in InDesign.

  Anyone who has heard of this or know why this happens - would like to hear from you.

  Thank you!

  I think it's simply because of full transparency on the page. Should not affect the production of gray images... but check in Acrobat.

  Mike