file txt and questions about conspiring field

Similar Questions

• Question about numeric field

  I have a numeric field that reads the object > field = digital > model Display = Num.Integer)

  When you enter the zeros the case of digital data at the beginning of the number. the zeros will not appear.  I need to change the model?  Thank you

  Click on the field that will use the zeros.

  Make sure that this field is set to the numeric field (object pallet - field tab - Type :)

  The field same tab is a button that reads "Bosses."... "click the arrow

  Click on 'View' and in the ' model: "field type"num {99999}"(this will give you an entry to five digits (45 = 00045) adjust the number of 9 according to your need.)

  Do not include the quotes enter text.

• Update blackBerry OS Z30 10.3.1 - questions and question about how do to uninstall / restoration

  Hello.

  From the start, I try to stay calm and professional, objective. Pretty sure I missed the mark, but then, read on...

  I'm having some problems with the OS 10.3.1 update. Before someone says to the research councils, I. For hours. On various Internet sites. I would appreciate (but I'm not optimistic for) an official response from BlackBerry.

  1. I use a Z30. Carrier is Rogers Wireless (Canada) updates are off. Yet, incredibly, the update came down in any case, when I was driving, didn't know until I got home. Device to reboot and now 10.3.1xxxx is on my smartphone.

  QUESTIONS:

  1. the screen turns off. Whenever I wake up, the display is enlarged. I have to move and move and gesture to get the display to fit the screen, so I can't unlock the phone.

  2. the home screen is not editable and is the default value. Now I have to drag to the hub or my applications. Twice = 1/2 labour productivity.

  3. the assistants touted what, exactly? As far as I know is when I call via voice Bluetooth headset, the call would be (75% of the time) be done. The other 25% of the time, I tell him 'Call MOM Home' is not the same thing as "search battery charge. Yes, my bluetooth is a very expensive, side that has no problems of recognition with another device. Now, the vocal part (Assistant?) does not ALL calls. At best, it offers me suggestions, usually not related (Linda <> Tom) and wasting my time reading on several TELEPHONE NUMBERS. Good grief, if I knew that the darn phone number, I just say, call (phone number). It would be faster than the sitting through it all. In otherwise, voice Assistant something doesn't do much for me. I put it, as far as I know, to do the minimum, not interact with everything on my phone.

  4. Although the new camera app now (finally!) makes the colors more or less correctly, whereas before everything was tinged blue, I'm not a fan of the new positioning of the controls. It's ridiculous to put the video button next to the "Take a photo" button. The touch sensitivity is therefore, that I find myself video recording rather than take a picture wanted - and the time is lost. I really miss being able to touch the screen to take a photo. Now I need to aim a small dot at the bottom. If I wanted an iPhone, I would have bought an iPhone!

  5 more at the front of the camera, it is now difficult to take pictures. As in, I touch the icon to bring up the list of photos, and the last shot never appears. I have to slide to find. And in a different direction now.

  6. in the hub, in particular, the "select multiple" used to be in the middle of the menu. Now I have to scroll down to find and activate it.

  7. What is with the battery drain honking? More DIY required on my part to get it back to waiting for 4 days, that I used to enjoy?

  LACK OF UPDATED FEATURES:

  1. I was really hoping that this last updated with the NUMBER of the entry of the phone display. As job 1, 2 work, etc. I find it helpful to assign the direct number always as job 1, then toll-free as job 2, reception work 3, home knit 4, and so on. Then it is easy to use (or was) to call the number I want without knowing what really is the number of votes. I was hoping also that the update which would therefore eliminate offensive message 'next time, just say call xxxxx Mobile 2' or something else. I'm bloody well would be if there was anything in contacts to display the sequence of numbers.

  2 calendar. Seriously, why can't set a reminder for somewhere between 3 and 7 days? I'm so tired of defining a day (7-3), making the calculation in my head to work around weekends or other events) and then having to update the reminder when I get to the range of BlackBerry - approved 3 days. Other smart phones allow a custom setting. I would also ask, put first the custom reminder. We do not do scroll all the way down to find!

  3. I would like to put my icons used on the fricking HOME SCREEN! I don't like the cutesy pictures. I'm trying to do my job more quickly and easily as possible.

  4. fix the darn voice control mechanism. I bought expensive pieces of Bluetooth. All I want to do is voice component. That's all.

  5. get some control over the spelling. There is no way to change the words that are "learned" through the monitoring of its use.

  6. enough with the U.S. - marketing. Mountain time is Mountain time. Not US - MST. I'm not picking up something like that, I don't like that who commits an offence. He is as stupid as the settting (like Apple) zones in the "Calgary, Alberta." I do not live in Calgary. I don't live in the GENERIC Mountain time zone.

  7. taking the floor, I also speak English. Not American English U.S. - spelling. How about giving some love to the Canada

  8. give me the option to restore the update. Or at least choose what parts I want.

  9 extend the supported file formats. At this stage, I can only load documents on my smartphone if they are Adobe or Microsoft Office. Here's the thing - I operates in the universe of Corel WordPerfect. If the Z30 is limited in what I can / can not do with it. Why the hell can't I just copy my FILES to my phone? Even if I can't change them, I can use the chip memory 64 GB huge like a flash drive to take my files with me when I travel. I don't always take a computer... sometimes I use which is destined. More have them on the phone SHOULD allow me to email them or send in other ways... whether or not BlackBerry to read.

  ===================

  REQUEST FOR ASSISTANCE:

  Best - out an immediate UPDATE to solve these problems and to add the features I pointed out above. I'm probably not the only one faced with limitations integrated interface and the information screens.

  Please tell me how I can restore / uninstall / whether this "update".

  I shudder to think that the only solution is to backup, recovery, and then reload the Z30. Others have tried and failed.

  MORE VENTILATION;

  The only reason why I'm still on BlackBerry, it's that the questions and to some extent a difference of perspective in regard to the available phone / features are even less problematic on BB Z30, they're on ios or android platforms. Quite in my opinion. But then, I'm the one with a frustration level into the red zone.

  Thanks for reading. I'll be even more grateful for the resolution of some.

  Cinereo wrote:

  QUESTIONS:

  1. the screen turns off. Whenever I wake up, the display is enlarged. I have to move and move and gesture to get the display to fit the screen, so I can't unlock the phone.

  Go into your settings > accessibility > and disable Mode magnify.

  If you do this, I would like to read the rest of your post and see what I can help with... and Yes, staying quiet is a great feature... I understand that you might be frustrated.

• Create your first website tutorial files missing and questions

  I'm working on this tutorial: http://www.Adobe.com/devnet/Dreamweaver/articles/first_website_pt3.html (With the help of Dreamweaver CC)

  I'm toward the end of part 3 of this tutorial (the part where you work with the footer) and notice that my page does not match the tutorial info. The sign of copyright is absent for one (I KNOW I put it there yesterday, but now it has disappeared).

  I tried to download the sample file first_website pt2_end.zip so that I can compare the source code and see what I've done wrong, but the file links lead me to 404 pages. http://download.Macromedia.com/pub/developer/Dreamweaver/creating-your-first-website/first _website%20pt2_end.zip

  Since I have no code to compare with, I'll probably start the tutorial all over again, just so that I can ensure that I followed all the steps correctly. * Sigh * but I thought I would ask here first.

  So my questions:

  (1) no idea what could have my copyright symbol disappear?

  (2) in this part:

  1. In the page layout section, set the clear property to left. The <footer> moves to the bottom of the page.
  2. Scroll the Document window as far as possible. You should see a light blue band below the <footer> . It's the same problem caused by the top margin on the main entry. Browsers apply top and bottom margins by default on the paragraphs, and bottom of the paragraph margin combined with zero lower margin of the <footer> and the wrapper <div> , pushing the wrapper <div> away the bottom of the page. In the section layout, the upper and lower value padding of 2px. The gap disappears (you need to scroll to the bottom of the Document window to confirm that).
  3. To align the text in the <footer> with the main <article> , set the left padding to 2

  The footer refuses to move from the sidebar box, no matter what I do. In part 2 of the tutorial he told me NOT to give the footer of ID. What might be the problem? When I create a section to make a footer, I need to create as "footer" as opposed to "#footer"? (Will try this - just think about it as I was typing this)

  Thanks for your help!

  I wrote this tutorial, but is not a control on the Web site on which it is hosted. Adobe in North America is on vacation this week, so there is no one that I can contact to fix the missing files. However, I downloaded my own versions of the files in the Dropbox:

  https://DL.dropboxusercontent.com/u/17016854/first_website_pt2_end.zip

  https://DL.dropboxusercontent.com/u/17016854/first_website_pt3_begin.zip

  https://DL.dropboxusercontent.com/u/17016854/first_website_pt3_end.zip

  https://DL.dropboxusercontent.com/u/17016854/first_website_pt4_begin.zip

  https://DL.dropboxusercontent.com/u/17016854/first_website_pt4_end.zip

  https://DL.dropboxusercontent.com/u/17016854/first_website_pt5_begin.zip

  https://DL.dropboxusercontent.com/u/17016854/first_website_pt5_end.zip

• reclassification of jinitiator in SUN JRE and question about Workflow

  I have a couple of questions really related to the workflow, then maybe wrong forum, but I'll start here.
  I'm upgrading of our 11.5.10.2 configuration to use jinitiator to SUN JRE and have a few questions.
  
  1. one of the patches I must apply '3865683' a ' step 11, run the program simultaneous Workflow Directory service Validation user/role. (Required) ".
  -problem is I don't know much about WF and don't really know what that means or what options to provide
  
  2. in my Test environment, which is a clone of Prod my shippers Notification and Service components are falling and yet once, I work in the how to correct this.
  I don't know if it's the result of my clone process or the upgrade steps that I lived to reach from jinitiator SUN JRE.
  So my concern is when I do this prod if it interrupts the flow of work or if it is simply due to the clone process.
  
  Any comment is appreciated.

  Hello

  The simple answer and support is 'no '. 6863618 patch is a patch of request (must be applied using adpatch), and it will update the files of application/database layer, in order to restore the database files only is not enough because it would make your incompatible application with the database.

  Thank you
  Hussein

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Little help General and question about layout theory

  Hello... any help appreciated:

  I am a photographer who has always been a person DIY.  I built a Web site for my work on my own using Dreamweaver and some tutorials online.  He comes back, it works (although a little slow), but the code would, I imagine, most of you take your computers and whiten your knuckles.  In short: it works on the tape, Staples and ideas of jerry-rigged.

  I've watched more tutorials and am rebuiding the site, trying to clean up the code and the site.

  I have a number of questions and issues that I have not been able to solve on my own and so I turn to this site.  I'll post a few initial questions here and even more in the following days.

  I sincerely appreciate the time and help you would be willing to offer.

  1. when I try to preview in Firefox, my computer switches to Firefox, but the site is not displayed.  All that appears is what was the last page I looked at Firefox.  This does not happen for Safari, Opera, etc..

  2 I watched videos on the site, built the site largely with a layout of the Tables and then a page turns with the Table in a template for the pages that follow.  I guess it's a frequently asked question: most people set out sites this way to make... or with the ApDiv?  I feel I'm learning a foreign language by the book... now I wondering how people REALLY speak.  My site is www.tomgriggs.net (look at the code at your own risk).  I provided that in the hope that, if you take a look, you might see a way to layout would work for me better than the other.

  3. What is recommend for my table, wide... I'm focusing on the photogarphers and others who usually have large screens and I want to maximize the space I have for my pictures, but I also want to most people when they visit my site to get the site on their screen.  The solution would only be a percentage based tabular presentation?

  I'll save the other for another day or post questions.  I appreciate any response you have!

  1. There is a known issue with Firefox 3.6.x and preview based on the browser.  It is noted in the Mozilla bug database and has been approved for publication in the next version.  I got the bug number in an old post, but I don't know off the top of my head.

  2 tables are a deprecated feature in Dreamweaver and have been removed from CS4.  So I recommend against learning in this way.  Œuvres of absolute positioning for some cases, but if you want a layout pass little matter that someone has the resolution you will end up with an elastic layout using percentages.  You can use div tags PA in it to achieve some effects.  But most of the time it should be used in some sort of container because otherwise your site will have different appearances according to the resolution.

  That your site is concerned, many will run your site through a validator: http://validator.w3.org/ - HTML, http://jigsaw.w3.org/css-validator/ - CSS.  At the moment your site validates 100% with CSS and has only a single error in HTML format (other errors are related).  Your "and must end with a ' / > '."  Apart from that, everything is in order.  Personally, I like the simplicity of your Web site, although I think you could add a little more to the grey background by integrating one of your images in the background.

  3. return to the table.  Closer look at your code and I see that you have a table around your content with a width of 1134.  Personally I trash and follow these steps:

  Here, all the power to the table remains

  If you get away from the table and move to div and layers, so you can make your more elastic page mentioned in the #2 response.  This code inside the body tag would give you a width of 90% of the visible area and auto margin: 0 would set the margin at the top and bottom of the page to 0 while the auto Center the page horizontally in the window of the browser.  As stated previously, layout tables are obsolete and will be not available in the latest versions of DW from CS4.  So I highly recommend moving ahead of them if you can.  The following resource is a good starting point for CSS ( http://www.w3schools.com/css/ ).  Think about the design of web sites in this way, just said HTML what should appear, CSS says what it should look like when it appears. Based on your current layout, it wouldn't be hard to reproduce this with fewer lines of code using basic CSS layout compared to the current table layout.  If you need an example, I could try to stick something together.  It may take a few days if.

  And if you have any other questions, feel free to post them.   Most of the users here are more than willing to lend a hand.

• Reading data from a file txt and inserting into table

  I have a text file and have uploaded data in this text file in an internal table,
  
  the data is normally placed online and I managed to recover most of the data, but I have problems by inserting a few conditions
  
  OK, well it goes like this.
  
  I got the right reailer id,
  
  Well, I have a table with all the columns in the file. Now it I'll try to throw it out as simple as I can
  
  
  Reseller 1
  
  column 1 column 1 column 1 column 1 column 1 column 1 column 1 column 1
  ===============
  Total 0 0 0 0 0 0 0
  -------------------------------------
  
  Distributor 2
  
  column 1 column 1 column 1 column 1 column 1 column 1 column 1 column 1
  ===============
  X 1123... .. .. .. .. ..
  234 Y... .. .. .. .. ..
  
  Total 23... .. .. .. .. ..
  
  see the problem is I have to associate the retailer number to their corresponding x and y and also not all retailers have values X and Y
  
  The remains of standard file format but only the values of the columns may change, but they must be inserted in the table according to the number of retailers.
  
  U understand what I mean...

  How about you, including both terminal number (just for the fun of it... hehe!):

  SQL> ed
  Wrote file afiedt.buf
  
    1  select retailer_no, terminal_no, retailer_name, val1, val2, val3, val4, val5, val6, val7, val8, val9, val10
    2  from (
    3        select case when retailer_no is null then lag(retailer_no, decode(val1, 'Loto', 1, 'Inst Tk', 2, 3)) over (order by line_no) else null end as retailer_no
    4              ,case when terminal_no is null then lag(terminal_no, decode(val1, 'Loto', 1, 'Inst Tk', 2, 3)) over (order by line_no) else null end as terminal_no
    5              ,case when retailer_name is null then lag(retailer_name, decode(val1, 'Loto', 1, 'Inst Tk', 2, 3)) over (order by line_no) else null end as retailer_name
    6              ,val1, val2, val3, val4, val5, val6, val7, val8, val9, val10
    7        from (
    8              select rownum as line_no
    9                    ,case when regexp_like(line, '^Retailer Number:') then regexp_replace(line, '^Retailer Number: +([0-9]+).*$', '\1') else null end as retailer_no
   10                    ,case when regexp_like(line, '^Retailer Number:') then regexp_replace(line, '^.* Terminal Number: +([0-9]+).*$', '\1') else null end as terminal_no
   11                    ,case when regexp_like(line, '^Retailer Number:') then regexp_replace(line, '^.* Retailer Name: +(.*)$', '\1') else null end as retailer_name
   12                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then trim(substr(line, 1, 15)) else null end as val1
   13                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 1) else null end  as val2
   14                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 2) else null end  as val3
   15                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 3) else null end  as val4
   16                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 4) else null end  as val5
   17                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 5) else null end  as val6
   18                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 6) else null end  as val7
   19                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 7) else null end  as val8
   20                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 8) else null end  as val9
   21                    ,case when regexp_like(line, '^( +Loto | +Inst Tk|Totals)') then regexp_substr(line, '[^ ]+', 16, 9) else null end  as val10
   22              from cdc_file
   23              where regexp_like(line, '^( +Loto | +Inst Tk |Totals|Retailer Number:)')
   24             )
   25        )
   26  where retailer_no is not null
   27* order by 1, decode(val1, 'Loto', 1, 'Inst Tk', 2, 3)
  SQL> /
  
  RETAILER_N TERMINAL_N RETAILER_NAME                  VAL1       VAL2       VAL3       VAL4       VAL5       VAL6       VAL7       VAL8       VAL9       VAL10
  ---------- ---------- ------------------------------ ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
  10000      1000006    XXXX XXXX XX Default Location  Totals     0.00       0.00       0          0.00       0          0.00       0          0.00       0
  10000      1000008    XXXX XXXX XX Default Location  Totals     0.00       0.00       0          0.00       0          0.00       0          0.00       0
  200101     20010100   XXXXXXX Popular Store          Loto       36,100.00  0.00       0          0.00       36         -5,646.00  0          0.00       0
  200101     20010100   XXXXXXX Popular Store          Inst Tk    22,000.00  0.00       0          0.00       166        -9,360.00  0          0.00       0.00
  200101     20010100   XXXXXXX Popular Store          Totals     58,100.00  0.00       0          0.00       202        -15,006.00 0          0.00       0
  200103     20010300   XX XXXXXXXX Snack              Loto       35,980.00  0.00       0          0.00       20         -3,426.00  0          0.00       0
  200103     20010300   XX XXXXXXXX Snack              Inst Tk    14,000.00  0.00       0          0.00       157        -9,180.00  0          0.00       0.00
  200103     20010300   XX XXXXXXXX Snack              Totals     49,980.00  0.00       0          0.00       177        -12,606.00 0          0.00       0
  
  8 rows selected.
  
  SQL>
  

  Published by: BluShadow on January 22, 2010 13:37
  added the retailer's name as well, but out anonymous that we dislike the actual data on the forums... ;)

• Comments and questions about the mixture ADF Page flows with Trinidad UI

  Hi all
  
  I did a few tests to see how possible it is to use Trinity to the UI (for compatibility of this stinking IE 6) as well as the ADF Page flows / controller of the ADF. My question is whether there is a sustainable configuration from the point of view of Oracle. I did things to make it work and noted the following interesting behaviors (call anaomalies, if you wish):
  
  (1) addition of ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well.
  
  (2) if I remove the ADF Faces DURATION 11 project library and create a page of trinidad (also set up the renderkit and as appropriate skin and remove a moment-false ServletADFFilter of web.xml) I get errors MDS when running the resulting page. I can't correct the error by removing the MDS libraries either - as soon as I put ADF Faces DURATION 11 library back, things are OK.
  
  (3) since I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either.
  
  (4) an interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the link/button to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true.
  
  So, in summary, I seems to be the controller of flow/ADF Page ADF working with Trinidad, with a few minor problems of productivity due to an obvious requirement to have the Library Runtime of ADF Faces and the extent of technology ADF Faces included in my project. Now Oracle - is this going to be a sustainable configuration?
  
  I'd also appreciate comments, suggestions and comments from anyone else who has tried or is trying to use the ADF Page flows / ADF controller with a single user Trinity interface (well, in my case, I'm going to blur more using the tag af:template with components of the Trinity, but it's another whole story).
  
  Best,
  
  John
  
  bump #2

  + 1). Adding the ADF Page Flow within the reach of the technology for a project automatically adds ADF Faces. If I try to eliminate ADF Faces of the scope of technology, it automatically deletes the flow of Page of ADF as well. +

  ADF task flows have to ADF Faces e around. Not sure this is documented somewhere, but I hope it's

  (2) no idea about it

  + 3). Since that I've faced ADF in my scope of technology, all newly created JSPX pages end up having af:document / af:form tags and have the namespaces implemented for ADF Faces. Not useful if I want only parts of Trinidad, but not a show-stopper, either. +

  Looks like that is facing an emergency room to have an option in the dialog creation page if create an ADF or page of Trinidad. I'll take a note

  + 4). An interesting thing that I have reported before... If I have the ADF Page library flow into my project and then configure navigation case in faces-config. XML (I know, wouldn't do that, just an observation, even if someone who has accidentally library ADF Page Flow in their project without any intention to use the ADF Page flows will find this very annoying to debug...), the first click of button that leads to the navigation works very well. All subsequent navigation requires two clicks on the button/link to trigger navigation. This behavior does not occur if you change the case of navigation to redirect = true. +

  I'm not sure how to restrict we are on the "do not use" them in combination, but to me this looks like a bug.

  Frank

• Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

  SpeedFan 4.25 is on my Toshiba Satellite SM30 604.
  Until recently, the CPU usage shown was variable.
  Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional things like Word, Excel, PowerPoint and many websites).

  Temperatures in most of the green time, the high 40-links, the low 50-links (I then scroll to the top of the Speed01 of the fan from 0 to 50% and 50%, it starts to run). I sometimes add an external fan, I work sometimes in very hot climates).
  I have the readings of the time 4.
  Local temperature: 49 c (with this temp color varies between a Green V and a red arrow pointing upwards).
  Temp distance: 85 (with a flame)
  HC0: 26 c (with a green (V)
  Temp1: 86 (with a red flame).

  WHAT ARE THE TEMPERATURES IMPORTANT? WHAT IS LOCAL TIME? TEMP DISTANCE AND TEMP1?

  These very high temperatures, I've had for a day. The fan is working (I hear it, I can feel. "I can see, because I partly dismantled the laptop.) But the Speed01 is 0%, and there is no reaction on the adjustment upward. Or playback is 100% without reaction to setting down. And rotating or disable "auto fan speed has no effect.
  And without any other program running, the CPU usage increased a few seconds after switching on to 100%. I do not notice a significant slow down in the speed of my applications when I start using them. And a virus today scan did not reveal all the important things.
  I can't activate my taskbar more.

  Who has some answers for me. Green in this area?

  Thank you

  Hello Han

  Your ad is very nice and very interesting, but you'll be very happy if someone can explain all this because you are using a non-Toshiba software. It is always recommended to use the original software because software Toshiba designed has been tested and it can just to protect the hardware components.

  Use of software from third party is always at your own risk, and if you have any problems or questions, please contact their own support. They have much more experience with your applications.

  I can just tell you that you should be careful where your laptop is placed and make sure that the device can take a deep breath and cool down properly.

  Good luck!

• Read file txt and research numbers

  I have a text file that looks like this:

  Ref #1 2.1 3.0-10

  Ref #2 3.3-2.3 - 1.5

  I would like the user to be able to:

  A. enter a line number in the digital control of VI and VI on-screen digital displays the numbers on the line.

  for example if the user '1' key, the three digital displays show "2.1", "3.0" and "-10"»

  B. key in a string in the control of chain of VI and digital displays in the view of the VI numbers on the line that contains the string

  for example if the user in "ref #2" key, the three digital displays show "3.3", "2.3" and "-" 1.5 ".

  An example of code?

  We can't really say what looks like your text file. What are delimiters? (tabs? space?).

  Here's what I'd do (if the file is clean (a single column separator, etc)):

  • Read the file using spreadsheet file playback using the polymorphic string instance. This gives you a 2D channels table.
  • Remove the first column and make it a table 1 d of channels.
  • Go to digital 2D table remaining channels and to convert an array of DBL.
  • Wire now two tables for a while in a loop so that the user can interact (use a small wait or structure of the event).
  • For scenario A, use the table of indexes on the digital Board to display the appropriate line.
  • For scénarion B, table search for use on the string, the index table and proceed as above to obtain the line.

  See how far you get...

• Simple question about the field in 4.7.0 class

  Hi, people.

  No one knows what method of field controls class that the virtual keyboard is displayed when the field is concentrated.

  I implemented a custom field and when it happens the keyboard displayed discussion. And I want to avoid this.

  What is the method that I need to replace to avoid the display of the virtual keyboard?

  Thank you.

  You can use the internal VirtualKeyboard onFocus of your custom field and onUnFocus methods to control the display of the virtual keyboard.

• Published SWF file shows no questions about their Captivate 8 slides

  I created a questionnaire in 8 Captivate (using Windows 7 so this is important). If I publish this quiz to HTML5, it works fine. However, if I publish to SWF format (in order to use the widgets) the first slide works, but as the whole issue of the slides are empty!

  I have republished this Quiz 20 times tweaking the settings back and forth but cannot get this to work, any ideas what could be the problem?

  First slide:

  

  First Question slide:

  

  Check if you have Slide Master set objects to be above empty slides.

• Edge of 530 slow wake up and question about wireless relatively to sleep

  Hi, I have a 530 advantage, I got it 2 weeks ago, running on windows 7 64.

  I found that on its quite slow to wake up default settings, I made a change that has been to the wireless card, I checked the allow my system to disable wireless to save energy (so it stays on). This seems to have made an immediate difference and the laptop wakes up now a lot faster.

  The problem now is to have this option checked, when my laptop wakes the without wireless is disabled when he wakes up and will not turn back, I have to turn it on manually. If I leave the power save option checked for the wireless card, that it automatically connect when my laptop wakes.

  Seems a little odd I thought uncheck the option to allow my laptop turn wireless off means he must just stay on, but he seems to have the opposite effect.

  Can someone advise? everything I wanted, it was for my laptop to wake you up more quickly and the wireless is turned on or auto connect after he wakes up.

  Thank you

  James

  I found myself the answer to this question, I found that I had to uncheck the same box in the bluetooth device, it does not work exactly as I wanted to and the wifi connection is more lost once I wake up my laptop

• Some problems and questions about StorE TV

  Hello! I bought stor.e tv a week ago and there are a number of issues, in order of personal importance:

  1. it slows down audio playback. It happens when the standard reading mp.3s on my stereo via the analog output - my music sounds weird, slow and with a reduced frequency. I have to go back change, the exit HDMI (normal speed part, no problem), then change new analog, navigate through folders to find the song I want to play and replay - voila, it works normally. Altogether in a complex way to play a song correctly, you do not?
  2. when there are ID tags (especially album covers) to the songs it takes forever to go from one song to the next.
  3 audio settings are often forgotten after the device has been stopped normally remote control only - you turn it on again and is not how I left it, but back to HDMI. So, I recall at any time check the settings before playing a song? Even if, in a tortuous path, that ^ s have useful to the problem of the mind 1.
  4. do not display correctly Cyrillic subtitles.
  5 pretty hot.
  There are other things, too (no playlists, not slow, slow to develop, etc.). I'm actually writing than just before you go back to the shop and ask for my money back.

  Bravo, guys!

  Hello

  > 4. Does not display correctly Cyrillic subtitles.
  Yes, has been mentioned in other threads seems that not all the subtitles are supported.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51945

  With regard to other issues.
  I think that you should try to reset the store default TV E again and should check how it works.
  In many cases, it helps to solve these annoying problems.

  Welcome them