"File type not supported" error message when you import jpg files into my Joomla blog... I just updated to the latest FF of the old version. Help!

Similar Questions

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• I just got the error message when you try to enter my I and Psalm I have paid for the monthly subscription for 3 months and still have not been able to use these software. they are already installed it just let me acess them?

  I just got the error meassage when you try to open both my I and PS I paid monthly payments for the composition and I have these two installed software. What can I do to work on it and why they give me this error message?

  Log, activation, or connection errors. CS5.5 and later versions

  Anything else, to be more precise. you have not provided information system nor told us, what really is the error message.

  Mylenium

• Why I get an error message when you import directly XAVC images filmed on a Sony FS7?

  I am importing XAVC footage of a Sony FS7, and when I import the file XDROOT, first gives me an error message 'Failure to import a file' saying only that "the importer reported a generic error." And yet, all the video & audio seem to actually come and play very well in the front. It seems strange and a little disconcerting, to get an error message that maybe I can just ignore.

  If you do not import this file, you use the media browser to navigate to it and import from there.

• Error message when you import a glide (attached)

  Announcement on behalf of the colleague who gets the following error when you import slides of cp:

  

  any help appreciated

  Thank you

  Hi costs.

  Instead of importing your slides, try to copy and paste them from the original of the project file in a new instance of Adobe Captivate and see if that makes a difference.

  Let us know how you go.

  Best regards

  Mark

• "The file is not found" error message when you try to view recent items list for word and excel files

  Title files: original vista on the recent items list does not open

  When I select a file from my recent items list, I get an error message indicating that the file is not found, but it lists the correct path to the file, and if you go to this path of the file, the file is clearly there.  This happens with word and excel files but not the adobe pdf files.

  Hi GillianMO,

  Remember to make changes before this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to send your request in the Forum Office for more specialized help.

  Office Forum

  http://answers.Microsoft.com/en-us/Office/Forum/Excel?page=1

• Difficulty 'Not connected' Error Messages When you try to access Web Services

  If you are running on an error message on your printer stating that it is "not connected" when you try to access ePrint or your applications, but you know that it is connected to the internet, it probably just means that the printer does not connect to the server properly.

  Here's the first set of markets, I will try, as they seem to solve this problem deliver half the time.

  • The first thing I'd like to try in this situation is a reboot of the system.
  • First, unplug the power cord at the back of your router.
  • Then unplug the power either to the back of the printer or the wall without it first turn.
  • Wait about 30 seconds and reconnect the power cord to your router.
  • Wait about another 30 seconds and reconnect the printer. It should start back up automatically, but if it is not moving forward and press the power button.
  • Once everything is back running, try to access ePrint or your applications.

  If these steps do not work for you, the next thing would be to establish a static IP & DNS for the printer. Before doing this, you want to print a Network Setup page. It varies from a model, but usually found under settings wireless or in reports in the Setup menu. After that you have this page, follow these steps.

  Before we begin, we need a network with your current connection settings configuration page. To do this, press the button on the front of your printer wireless and press 'Print Info' or 'print the State. " This example displays on a page of configuration of the network, which provides information on what we have to finish the next few steps.

  • After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.
  • Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).
  • Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.
  • For the primary or the preferred DNS server, you will want to enter 8.8.8.8.
  • For secondary school or another DNS server, you will want to write 8.8.4.4.
  • Click on apply and when the message appears saying that the changes have been applied, press 'OK '.
  • Press the power button on your printer, wait that it completely power off and press it again to power it on.
  • After doing this, go ahead and try to activate ePrint again.

  These measures should fix this for you. If they don't, then something else can cause this problem for you. Reply in this thread if these steps do not work, and I'll see if I can help figure you out what might be causing the problem.

• Error message when you try to install Windows Imaging Component ' wic_x64_enu.exe «installation cannot find the file update.inf...» »

  I'm installing MS wic_x64_enu.exe and get the error message: «Setup cannot find the update.inf file needed to update your system» I run SFC.exe and found no errors. I also reinstalled. NET40. and I still get the same error message.
  I am Windows 7 Ultimate SP1 64 bit on a HP PC with an AMD Phenom 9150e Quad Core processor 1.8 GHz and 8.00 GB RAM.
  I worked on it for a few days without result.
  Any help will be much appreciated.

  Giles

  Try this search http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-imaging-component-installation-fails-in-my/a13c1e1d-361e-4601-8fc4-4d416edef853?tab=AllReplies#tabs in the registry.

  Run-->--> look forthis key regedit. Already installed.

  I have encounterd this problem by reinstalling .NET.

• Error message when you import fixed active information in Microsoft Dynamics GP: "no active window. (Line #14) »

  I am trying to import all capital companies fixed my GP CSV file using the import of GP function. The way in which the fixed asset module has been implemented initially was incorrect, so I removed all the goods that are currently in GP and am importing all goods to the GP again using the import function. I've set up my CSV files and when I import the file I get the following error message: "no active window. (Line #14) ». Can someone tell me what this means and how to fix it?

  Thank you.

  Hello

  Given that the problem is related to the dynamic group policy, please ask your question in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?searchTerm=SSRS%20and%20Dynamics%20GP%2010.0

• Error message when you import requisitions

  When you want to import requisitions of po_requisitions_interface_all table using import demand request that we get the following error:
  
  Preparer is not a user online
  
  Cause: The preparer must be a user in line if the application is not approved.
  
  Action: Make the coach a user online.
  
  Action: enter a trainer who is also a user online.
  
  I can't find anything on this error om metalink. I checked the responsibilities of the user etc. His user name and all responsibilities were the expiration date but I removed all the dates end and tried to run demand for import of requisition again, but we still have the same problem. It is in the trust hierarchy and is set up as a buyer. Does anyone have advice?
  
  Thank you
  Roald

  If the error is not in the documentation or in Metalink, then opening an SR would probably be the best (and only!) road.

  Srini

• Error message when you try to download files - WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.

  Original title: C:\windows\system32\icacls.exe
  For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection.  Whenever I do; try to download something or download something, I get the following error:

  WINDOWS SECURITY, these files cannot be opened.  Your internet security settings prevented one or more files being opened.
  C:\windows\system32\icacls\exe

  I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.

  Any suggestions?  I really need to download Trend Micro.

  Thank you
  Amy

  See the article below:

  ID of the KB Article: 2588679.

  Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened." http://support.Microsoft.com/kb/2588679

  Check the following settings:

  Right-click on the downloaded file. Select Properties.
  Click the Unlock button.

  Check the suggestions the following threads:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/these-files-cant-be-opened-your-Internet-Security/7bbe6bc9-d89f-4407-81fa-ea4c24b39aaf

  Let us know if that helps.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work

  Microsoft Fix Center 0 X 80092003 error message when you try to fix the hardware and drivers, the program does not work. I use Windows Vista Home top.  Please provide me with a fix for this problem. Thank you

  Hello

  What type of material is actually causing the problem? Is there more information the Fix It center offers you?
  I would have a look at the article I have below the link and go ahead and run a update of Windows on the PC.
  http://support.Microsoft.com/kb/947821
  I hope this helps.

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")