File:\windows\system32\ntoskrnl.exe

I need serious help!

Some wonder how I deleted some system 32 - files

Anyway now I can not connect my computer backinto.

I am running Vista Business as my OS

At startup, I wonder to insert my disck installation and restart - does not work - also tried repair - same result

The error:

File:\windows\system32\ntoskrnl.exe

Status: 0xc0000428

Info: Windows cannot verify the digital signature for this file

Please can someone help?

Thank you

Albert

Heya,

Here are some links that may help solve the problem.

Tags: Windows

Similar Questions

  • OxcOOOOOOf error - file: \Windows\system32\winload.exe status: OxcOOOOOOf

    I get a message from Windows Boot Manager as follows: could not start Windows. A recent hardware or software change might be the cause. To solve the problem: 1. you insert the Windows installation disc, and then restart your computer. 2. choose your language settings, and then click "next". 3. click on "Repair your computer."  If you do not have this disc, contact you system administrator or computer manufacturer for assistance.  File: \Windows\system32\winload.exe status: OxcOOOOOOf Info: the selected entry could not be loaded because the application is missing or damaged.

    I have the drive, it won't start him.  I got the diagnostic tool memory to run.

    What should I do?

    See the Divine Logix post on this thread if it helps:

    Winload.exe is missing or damaged (no it isn't!)
    http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/c99dc573-6842-4E28-8ec0-a63c61495308/

  • Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

    Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

    Im getting the message of File:\windows\system32\winload.exe

    Hi WillieGuyton,

    (1) since when are you facing this problem?

    (2) remember to make changes?

    (3) what is the complete error message you receive?

    (4) what is the number of brand and model of your computer?

    Method 1:

    Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

    If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

    Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

    How to access the System Recovery Options menu?

    Run the tool to restart system as shown in the link below
    How to use Startup Repair?


    Method 2:

    Step 1:

    Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

    Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

    Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

    http://support.Microsoft.com/kb/919529

  • Vista, it lacks the file:\windows\system32\winload.exe.status:0xc000000f,D partition was installed at the factory, backup

    I deleted the contents of partition D on my friends family vista premium, now it will not boot from the disk of the plant, he said that the file:\Windows\system32\winLoad.exe is missing with status 0xc000000f were if I can get this file or is there anything I can do to get the content from the back of the drive D : or just that he can start up without this partition D

    Hello

    the D: Recovery partiton was photographed by the manufacturer during production

    Once deleted it

    you are not supposed to ever altering this partiton

    as you have problems with the process of recovery of manufacturers, contact the manufacturer

    It's their recovery process not microsofts

  • c:\windows\system32\ntoskrnl.exe is currupt

    Hi gurus,

    I am running vista professional.

    When starting my computer, I get system32\ntoskrnl.exe - cannot verify the signature

    I then insert the disc and choose repair

    A system recovery screen opens with Windows Vista (recovered) - load drivers or next

    A load the drivers of C: or CD?

    I also noticed I have a Boot (x :)) - don't know what it is?

    How can I re-mode Vista?

    In the C:\system32\ntoskrnl.exe when I select

    I get a pop up specified locotation does not provide information about your hardware

    Add drivers?

    Don't forget that I can not open Vista?

    Thank you

    Albert

    Hello

    ·         What is the exact error code or the message you received?

    ·         Have you tried starting mode safe mode with networking?

    I suggest you perform the steps below and check it, if it helps.

    1. boot in Windows Vista CD WinRE.

    2. Rename C:\WINDOWS\system32\ntoskrnl.exe

    3. copy ntoskrnl.exe in C:\WINDOWS\system32 C:\WINDOWS\system32\dllcache of

    4 reboot

    You need to load the driver on the CD: when it asks.

    To reinstall Vista or related topic, please follow the link below.

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

    hope this solves the problem.

  • PC needs to be repaired, File: \Windows\system32\winload.exe, error Code: 0xc000000e

    I tried to install Windows 8 on my PC that was dual-boot WIndows 7 from 2 different hard disks and would choose between the 2 at the start.  So I deleted the partition of a Windows installation and installed Windows 8. Everything seemed to work fine, I could start and choose between Windows 8 or 7 and both worked well. Then, I updated a graphics driver Win 8 and caused problems with Win starting 8 by a black screen and nothing else. There is no restore point so I decided to start by deleting the partition. I have re installed Windows 8, but now when I boot I get an error screen.

    "Recovery".
    Your PC needs to be repaired
    File: \Windows\system32\winload.exe
    Error code: 0xc000000e
    You will need to use the tools of recovery on your installation media, etc...

    Press Enter to try again
    Press F8 for startup parameters
    Press F9 to use another operating system.
    It allows me to boot from another HD after pressing F9 several times.
    Any advice would be appreciated.
    Kind regards
    Anthony

    I had exactly this problem with a Windows 8 machine with a hard drive only a couple of weeks might not start on Windows or Windows CD but was able to start USB recovery and follow the steps below.
     
    Start the computer with the recovery media inserted. The computer must load the CD or USB. (You may need to change the BIOS boot sequence to start the USB drive first).

    Choose your language. Click next
    You will now see install in the center of your screen. On the lower left side you can see fix your computer.
    Choose repair.

    You will have several options, including:
    Refresh your computer
    Restore your computer
    Advanced options

    Choose Advanced Options.
    Launch the command prompt
    Enter the following commands one at a time who hit enter after each command.
    Bootrec /scanos
    Bootrec /rebuildbcd
    Bootrec /fixmbr
    Bootrec /fixboot
    Restart the computer once the last command finished

  • PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

    Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

    After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
    with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
    {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
    That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
    and you will need to use recovery tools.
    Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
    Enter in any of the three choices just recycled the screen containing the same information.
    {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
    PC starts loading the cd [dvd, 4 windows box logo appears on the screen
    Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
    at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
    Produce the same results as step 2 above when I try to use the windows 8 installation disc.
    I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

    Tony Hey,

    Regrettable that the problem exists.

    Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

    They might have more insight on this.

  • "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

    Original title: black screen

    Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

    There is a good chance that the disk check running the Recovery Console will solve the problem.

    1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
      
    2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
      
    3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
      
    4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
      
    5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
      
    6. at the end of the output of scan type > press ENTER.
      
    7 restart your computer.

    If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

  • Windows didn't start because the following file is missing or damaged: _ < root Windows > \system32\ntoskrnl.exe.__Please reinstall a copy of the above file.

    Hi the other my system was crushed, and on restarting I got this message: Windows is not start because the following file is missing or damaged:

    \System32 \ntoskrnl.exe.
    Please reinstall a copy of the above file.

    I've read a few articles online, but still I can not solve the problem. I don't want to reinstall XP or lose my information.

    can any1 give me a simple cut down on what to do (step by step).

    Thanks in advance.

    Hello Jamdutch,

    Thank you for your message.  Click HERE for instructions to perform a repair of the system installation.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows (Vista) can not start because the following file is missing or corrupt: < root windows > \system32\ntoskrnl.exe

    When I start windows, the message that I get a black screen is Windows (Vista) cannot start because the file is missing or corrupt: \system32\ntoskrnl.exe. Please reinstall a copy of the above file.

    I tried to launch a system of diagnosis without a disk and everything going on. I then tried running windows in safe mode and it won't allow me. That's when I switched to an installation disc supplied with the system. I tried to recover the system from there, but it would not go beyond the option of choosing an operating system. Once I got to that screen, there was NO operating system choose.

    I tried to restore my computer and there is no restore point.

    I renounced restore my computer and thought I'll all start over and install windows vista all over again. This was not the case either. I followed these steps:

    1. Turn on your computer and insert the CD or the DVD of Windows Vista.

    2. Install Windows page, follow all of the instructions that appear, and then clickInstall now.

    3. On the Get updated important for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

    4. On the Type your product key for activation page, we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

    5. On the Please read the license terms page, if you agree to the terms of the license, clickI accepts the terms of the license.

    6. Follow the instructions on each page. On the type of installation do you want? page, clickCustom.

    7. On the place where you want to install Windows? page, select the partition where you want to install.

    8. Click next to begin the installation. You can see a compatibility report.

    and then had this error that says;

    windows doesn't have can create a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0x80004005.

    Now I am stuck and don't know what to do.

    Someone at - it solutions for me. Help, please.

    Hello

    1. on which the drive was initially installed OS?
    2. What partition you selected to install Windows?

    You can try to perform a startup repair by using the Vista installation disc.

    Check out these links for help:
    http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions  

    How can I fix a startup (startup)?
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem 

    What to do if Windows does not start correctly:
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly 

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista 

    If nothing helps, so please get in touch with the system manufacturer for assistance because it may be a hardware problem.

    Kind regards
    Afzal Taher - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Toot of Dell Inspiron 910 windows system32 ntoskrnl.exe error

    I booted up my laptop Inspiron 910 and got the following error message:

    Windows root system32 ntoskrnl.exe missing or corrupt please reload the disc.

    I tried several attempts through the advanced options [F8] and always comes back to the same error message.  I changed the BIOS to allow the disc to load first.  I put the Microsoft Windows XP Home Edition SP3 CD and you press a button to start.  Setup begins to install the files, but then I get the blue screen of death.

    It reads:

    A problem has been detected and windows has shut down to prevent damage to your computer.

    If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

    Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Technical information:

    STOP: 0X0000007B (0XF7A5E63C, 0XC0000034, 0X00000000, 0X00000000)

    I also run diagnostics and got these error messages:

    Error Code 0F00:0244 Msg: DISK_0_Block 13533192 cannot read, replace the drive or remove the write protection

    I also have the same error codes in the following blocks:

    13533193

    13533194

    13533195

    13533196

    13533199

    13533208-13533215

    13533224

    13537707

    Any assistance or solutions would be useful!

    Thank you

    Hi rmina71,

    ·         Have you made changes on the computer before this problem?

    Follow the steps in the article.

    http://support.Microsoft.com/kb/2022960

  • need to re - install < root windows > \system32\ntoskrnl.exe

    My computer does not load Windows. I use XP Professional Sp3 (I think). My drive is XP Professional SP2.

    When I try to boot from the cd, I finally get to a screen that gives me the Windows installation press options 1) enter or 2) to repair XP using the recovery console. Press r.

    No matter which option I choose, I get the message "implementation did not hard disk drives in your computer."

    I pressed F8 and used the "disable auto reboot" and received the message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe please reinstall a copy of the above file"

    How can I do this?  Thank you, the Safi

    Shouldn't you have the following option under integrated peripherals:

    On Chip IDE - SATA Controller [SATA, RAID or off]

    You don't want RAID!

    You should be able to select SATA and then SAVE the changes that you exit the BIOS (sometimes people forget this step!).

    Not all mobos have the ability to disable sata ahci. The sata/raid controller driver is needed for windows recognize the drive sata hard. Having the pilot does not mean that you have to configure or use the raid features. RAID is simply two working as one of the hard drives. Most of the drivers manufacturer mobo that I take care of combine sata and raid drivers for the controller in a single package. Here is an example of a driver for Intel Matrix Storage Manager. It is a common driver needed for Windows to recognize a disk sata hard connected to a motherboard Intel. If the options as shown in the above post by Jose do not appear in the bios then install drivers, as I said. For this reason, Windows gives you the opportunity to press F6 to install the drivers before the implementation.

    Intel(r) 82801ER SATA RAID Controller
    PCI\VEN_8086&DEV_25B0&CC_0104=%systemdrive%\drivers\MSD\IMver5\iastor.inf; I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

  • When turned on the computer he get an error message ' missing < root windows > \system32\ntoskrnl.exe.

    Hi, I replaced the motherboard in my computer, it seems to work very well, but when you turn on the computer I get an error message:

    \SYSTEM32\NTOSKRNL.exe is missing or damaged

    At this stage there is no cursor, or what I can do to get in my area on my drive, it's as if the computer shuts down and this message does not disappear.

    I am running Windows XP operating system.

    Is there a solution for this?

    Thank you

    Hello

    · What is the number and the model of the computer?

    · What is the service pack installed on the computer?

    Follow the steps in the link below and check if this can help: error message: "Windows did not start because of a configuration of the disk of the computer problem": http://support.microsoft.com/kb/314477

  • lack file \windows\system32\winload.exe

    try to find a missing file, so I can start my computer, the file is \windows\system32\winload.exe

    original title: I need to know about a lack of file how do I start my PC it is \windows\system32\winload.exe how to do this when my computer starts

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • XP Pro gives me error message < root windows > \system32\ntoskrnl.exe is damaged and must be replaced. How to replace or fix this problem?

    I tried to reinstall XP Pro, but then I get another error message the file for web printer windows cannot find so it won't let me not finished reinstalling XP.  How can I solve this problem or solve the problem with the ntoskrnl.exe that need to be replaced?

    Susan77,
    Try the items listed in this article: http://support.microsoft.com/kb/314477 
    It covers the error you see and can be useful. Typing of my new Windows 7 64 bit and love it! Soli Deo Gloria!

Maybe you are looking for

  • Error with iTunes in Windows 10

    So I have a strange problem. What is happening is iTunes opens (perhaps more slowly than normal? Unconfirmed), but will enter a strange state. This will be repeated at random, sometimes when the program starts immediately, other times, a few minutes

  • Satellite A20-S103, graphic upgrade S20

    Is it possible to upgrade the video card in the S20 series? Currently I Trident CyberAladdin and very disappointed with it. Thank you

  • Thing to deal with when migrating site of linux to windows server?

    I need to migrate my customer site because they asked me to host windows Server. But I am new to windows server platform. I'm only familiar with linux server. If you make a mistake then client will sue me. Customer site is careerarm , because I copie

  • I have error #1053 windows could not start the printer spooler. Help

    Windows could not start the printer spooler. I received the error #1053.whatever it is sent to the printer never finished loading and crashes to the topmy computer, so I have to re - start.

  • Envelope does not print

    I printed recently successfully a long envelope with from and to addresses (using Works 8.5 with HP printer). Today, I started another envelope with different addresses, same size. I loaded it exactly the same, but for some reason the envelope is is