file__ WPL

What should I do to play a wpl file.

Rapsody salvation,

You can use Windows media player to play .wpl files.  Please let us know if you are using Windows media player and get an error message.

Some information about the .wpl files:
The selection of Windows MediaPlayer (.wpl) files are selections client which are written in a proprietary format. Microsoft introduced this file format in Windows Media Player 9 Series. The .wpl format can create dynamic playlists. In Windows Media Player, the AutoPlay list uses the .wpl format. The .wpl format is the file format by default used for playlists that you save in Windows Media Player.

Kind regards
Abdelouahab

Microsoft Answers Support Engineer

Tags: Windows

Similar Questions

  • The playlist is saved as wpl but error message when you try to listen.

    Have the music files saved in my email as old skool play list.wpl. When I run the file and open it plays the first two songs and then I get the error message.

    "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "Once the message appears the file who played before at least 10 other files display a red circle and x to the left of the song.

    But if I scroll down and click play on another song he plays, but when I try to play the next song on the playlist again error message and the song which just play comes with the x and the red circle. Have tried this on multiple computers that are running Windows 7 and another that runs Windows XP even result. If the file is corrupted, it would play? I have over 500 songs on this playlist and he had already permitted to listen to me a few months ago.

    Hello

    ·         What operating system do you use?

    ·         You try to save the file to your post office and check if it works?

    This error may occur for one of the following reasons:
    The file is currently in use. Close the file and then try again.

    You are not allowed to access the location where the file is stored.

    Follow these steps to grant all permissions in the folder where the files are stored:

    a. right click on the folder on the external drive and click Properties.
    (b) in the Properties window, click on Security tab.
    c. now, click Edit and then click Add.
    d. now, type everyone in the box and click OK.
    e. then check the full control box.
    f. click apply and then click OK.

    You can also try the mentioned below as follows:

    a. Click Start.
    b. go to the control panel.
    c. Select "SOUND".
    d. double-click speakers.
    e. click on the Advanced tab and then uncheck the enable audio enhancements.

    Kind regards

  • Convert.wpl to .m3u

    I have about 8 GB, formula in.wpl of music that I have to copy & convert to.m3u format so that I will have all the 8 GB both.wpl & .m3u format. Can someone tell me please the easiest to do this? Thank you.

    Scroll down and all will be revealed.

    http://www.technologyquestions.com/technology/Windows-Media/195338-convert-wpl-m3u.html

    See you soon,.

    Jerry

  • can I use m3u or wpl to burn CDs

    can I use m3u or wpl to burn CDs

    Hi Ronald,.

    What application are you using to burn the CD?

    If you use Windows Media Player to burn the DVD, the player creates a playlist that lists the files being burned and then includes the playlist to disk. If the drive supports selections, items will play in the order in which they appear in your burn list. By default, the playlist is saved with .wpl (selection of Windows Media Player). If you want to play your data discs on a device that does not support this extension, you can use the .m3u extension instead.

    For more information, you can consult the following article:

    Change settings for burning a CD or DVD in Windows Media Player

  • How to convert a WPL of music file in my Windows 7 to an MP3 for a Sandisk Clip Sport formart

    Song downloaded to Windows 7 Media Center. It is a WPL format, but I can't play on my SanDisk Clip Sport MP3 player because the player does not support this file format. How can I change the WPL to MP3 format?

    Hi Natalie - WPL is a playlist file and cannot be converted to mp3 because it contains only pointers to the actual music files. You need locate the actual music files and transfer them from there. (They may not be no need for conversion - it depends if they are in a format supported by the SanDisk card - it seems to support usual ones).

    Cheers, Ric.

  • burn a Wpl file?

    Can I burn a song that is in my Windows Media playlist (WPL) format to play on a standard CD player. Or will I have to convert it?

    If so, how should I do.  Your help will be very appreciated!

    I have the same problem.  I look forward to your comments.

    Chris

  • Are el formato Y W3U WPL

    Cuando estoy recording musica para un disco burn 700 MB CDs couple promotion options of the las en appears in una casilla lo siguiente:

    Data disks

    Add a list of all files written to the disc in this format: WPL

    W3U

    SIGNIFICANT THAT ESTOS FORMATOS: WPL Y W3U?

    Y CUAL DEBO SO?

    Look at the top right of this page, next to your username. Click on "English" & select your language from the drop-down list and then search this forum &, if necessary, ask your question here.

  • How to convert files audio wpl for use in Adobe Audition 3.0?

    I have some of my own voice-demo files in Windows Media Player as a .mpl file.  I would like to run these through my Adobe Audition 3.0 for editing purposes.  How can I do this?

    You can try this link.

    http://social.msdn.Microsoft.com/search/en-us?query=Windows%20media%20encoder%209%20%26%20Converting%20wpl%20Files&AC=5

    Also, I am sure that the WM Encoder has a download add-on for Adobe conversions.

    The default encoder can convert multimedia (audio/video)...

  • How to open a file__ ofx

    Should what files or drivers I download in order to open an ofx file

    http://www.FileInfo.com/extension/OFX

  • Access denied Message Windows xp home opening or PST File__ improtin

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Make sure that you saved the file .pst to useful somewhere on your hard drive, like your My Documents folder. Then right-click on the .pst file and make sure it is not set to read-only. If the .pst file is already in My Documents and is not read-only, take possession of it.

    Appropriating a file or a folder under Windows XP [Q308421] - http://support.microsoft.com/?kbid=308421
    How can I get the Security tab in the folder properties? - http://www.dougknox.com/xp/tips/xp_security_tab.htm

    MS - MVP - Elephant Boy computers - don't panic!

  • Properties view displays all the settins, theme shows right and when I leave my computer on some time it crashes. How can I fix it with the windows CD? Compatibility Wizard says bad ini file__

    When I try to change the background, display shows theme instead, properties and when I leave my computer on at a certain time, it freezes. What can I do to fix this? How can I use windows CD to repair, when I put the CD and you press the 'r' key, nothing happens, please help?

    The lack of tabs in display properties usually indicates a malware infection. First run the scans and do not skip the preparatory work. If the machine stands (not frozen) in Safe Mode (where you'll be scanning), it is also a good indication of infection. Regarding the CD does not start, you probably don't have the computer configured to boot from the optical drive. But no matter, because enter the Recovery Console (which is what happens when you press 'R' from the XP installation disk) won't be useful in your situation anyway.

    Go through these stages of systematically General malware removal:
    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    Include analysis with David Lipman's Multi_AV of and follow the instructions to do all scans in Mode without failure. Read the Special Notes about the use of Multi_AV in Vista.

    http://www.elephantboycomputers.com/page2.html#Multi-AV - instructions
    http://tinyurl.com/yoeru3 - download link and further instructions

    When it failed, download Guided Help. Choose one of the specialty forums listed on the first link. Save and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!

  • Cannot find Rundll32.exe file__

    HI, I tried the instructions 'expand' with a disk, but it didn't work.  I found the file in both the folder i386 as well as in the system32 folder.  I was going to copy and paste into the system32 folder, but he was already there.  What can I do else?

    Also my .exe application is not found.  Anyone know how can I get that back?  I tried restoring the system to a specific date, but it did not work.

    Thank you!

    Of Doug Knox fix to fix the .exe association:

    http://www.dougknox.com/XP/file_assoc.htm

    Then make a thorough analysis of virus/malware:

    http://www.elephantboycomputers.com/page2.html#Removing_Malware MS - MVP - Elephant Boy computers - don't panic!

  • I can't run exe file__

    I can't run the exe in Vista

    such as control.exe

    Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and run the option for .exe files.  This should restore the association files with .exe files and you should be in business.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Media Player 11: How to print the content of a reading list (.) WPL) somehow "well-formatted.

    I want to print different playlists that I use in Media Player 11, but there is no print option in Media Player

    See you soon
    Wakdos

    Hello

    WINDOWS MEDIA PLAYER PLAYLIST PRINT
    http://www.footballchance.com/WMPplaylist.shtm

    How do I print a playlist in Media Player 11 - it comes to the use of the foregoing
    http://www.ehow.com/how_5614381_print-playlist-Media-Player-11.html

    Printing of playlists
    http://Askville.Amazon.com/SimilarQuestions.do?req=Windows-Media-Player-11---print-listing-artists-albums-library

    ==============================================

    This free program does not print playlists but it offers control over printing file lists.

    No longer fumbling with my computer or Windows Explorer, we wish you could print information
    all of your files. Directory of Karen printer can print the name of every file on a disk, as well as the file
    size, date and time of last modification, and attributes (read-only, hidden, system and Archive)! And
    now, the list of files can be sorted by name, size, date created, date last modified, or last access date.
    http://www.KarenWare.com/PowerTools/ptdirprn.asp

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • When I burn my wpl to audio cd in windows media player 7 it says it burns, but when I put it in a car or cd player says cd error 1 How can I fix? __

    How can I make my windows media player an audio cd without him saying cd error 1

    Visits has Windows Media Player 11, and these are the Vista Forums.

    We give Vista information in these Forums:

    If you have Vista, read the information below:

    Read the section on using disks of ISO for the older image format or different CD players

    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

    If your computer is equipped with a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. By default, Windows Burns discs in the active file system format, but you can also choose to burn discs in ISO image format.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

    Why are there two different ways to format a disc?

    You can choose between the formats of live file system and mastered during the creation of a new recordable disc because each of these formats is used for different purposes. The default choice is the active file system because it is a more convenient way to create a disc. When you use a Live file system disc, files are copied to the disk immediately. When you use the ISO image format, the files are stored in a "transit zone" until you decide to burn the disc.

    When you use the system format active files with rewritable discs, such as CD - RW and DVD - RW, you can also erase unwanted files from a disc to recover space, which is not possible with mastered discs. On the other hand, mastered discs are more compatible with older computers, previous versions of Windows, and other devices such as CD and DVD players. For more information, see which CD or DVD format should I use?

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • Start the Boot Manager

    Hi all I installed Sierra but need to wipe my drive to improve performance and have implemented the installer of macOSSierra on a USB key and necessary to reach the Boot Manager to start the installation. I think you hold down the Options/ALT key dur

  • My apple ID became invalid after the recent upgrade to ios 9.3

    My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even. For now, I am unable to pay for anything because I can't access the function of apple on the phone pa

  • Y410P Nvidia GPU works only when plugged in?

    Hi all I know that this is a frequently asked question, and I also knew that the Nvidia GPU raised only when an application heavy 3D graphics is charged. This is the case. But I don't get a bad 3D rating (1 star or higher) during the game. I have con

  • I use word for mac and have problems with Hebrew and orientation of the text from right to left

    Hello I use Word for Mac on my MacBook (version 10.11). I have problems setting the orientation of the text of the Hebrew version. Where can I find the icon for the orientation of the text? (not like the alignment)

  • Exploit: Java / CVE-2012 - 0507.AZ partially removed by Ms Security Scanner

    Exploit: Java / CVE-2012 - 0507.AZ only partially deleted by MS. Security Scanner How to complete uninstallation? Why do I get these problems? Can I remove all references to Java? Thank you in anticipation of assistance/repsonses and everyone out the