Files downloadinf Windows Update problem

Similar Questions

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Windows Update problem - 0 * 80070005

  * Original title: windows update problem

  I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.

  First of all

  KB3138612 would be the last for a manual installation

  The first would actually KB3145739

  Homepage for all versions,

  https://TechNet.Microsoft.com/library/security/MS16-039

  After that you manually install you KB3153199

  I would also like to before doing this,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642

• Windows Update problems 0x8024a005

  problems of updating Windows 7 every time I try to update I get error 0x8024a005 next

  OT:

  Windows Update problems

  Try the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable third-party firewalls.

  Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

  J W Stuart: http://www.pagestart.com

• Windows update PROBLEM - always needs to change first the file distribution system

  I am running with Windows Vista Home Basic Edition and are struggling to update my files after a clean reinstall.  Finally got through many strategies, but doing so thereafter (once) noticed that the failures occurred each time that the "System of Distribution" file in the windows folder has not had been empty of logs and the previous downloads.  Don't know what that means.  Any ideas?  Could there be a problem with the hard drive, processor, motherboard, short circuit? (Have no problems downloading on other computers in my house, my overall connection is good).

  Thank you.

  Hi Loraoshea,

  You can read the following article and try to reset the Windows Update components and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with services of automatic startup after Windows Update problem

  These are probably related to many things I tried trying to solve the problem of Windows Update - until I found the answer to Fix It.  That fixed my Windows Update, but now I have these problems.

  I tried to run the bat file that Sohail suggested in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/41f1d01e-e787-479b-83de-c66f40a23a37/
  He ran with errors, so I suspect he undid some things and then they don't get put back.

  Those that I know I need is:
  Windows Audio
  DHCP client

  These two begin very well once the system is in place, but I have to do it manually.  They still claim to be automatic when I view in the Services management tool.

  I also noticed that the following services are set to automatic but have not started either.  Is this a problem?
  Task Scheduler
  TCP/IP Net BIOS Helper
  Windows event log
  TPM Base Services

  So, how do you restart automatically?

  Problem posted in another thread to improved Performance.  Long story short - a repair settled with Vista DVD.   He fixed the problem of services, but the problem of Windows Update is back.

• Missing DLL files. Windows Update does not work. Manufacturing installation of Xp home Sp3.

  I inherited my parents (RIP) PC. It is a Windows Xp home service pack 3 installation manufacture. I'm NOT have a disk to reinstall. There are problems in the registry and the missing DLL files. I can't update windows to work. The downloads will not be installed.

  I was told "running" sfc/scannow and rather than put it on Cd to type the path to the files (C:/windows/I386)... I tried... But he asked the CD and will not let me choose a path.

  So... How can I reapir my Xp home without the disc?

  On Monday, December 6, 2010 20:55:18 + 0000, janiflower wrote:
   
  > I inherited from my parents (RIP) PC. It is a Windows Xp home service pack 3 installation manufacture. I don't have a disc of resettlement. There are problems in the registry and the missing DLL files. I can't update windows to work. The downloads will not be installed.
  >
  > I was told 'run' sfc/scannow and rather than put it on Cd to type the path to the files (C:/windows/I386)... I tried... But he asked the CD and will not let me choose a path.
  >
  > Then... How can I reapir my Xp home without the disc?
   
   
   
  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.
   
  If you reinstall Windows properly, you are playing with fire.
   

  Ken Blake, Microsoft MVP

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Windows Update problem "error 70490.

  A few months ago, my 7 years old Windows 7 update screen is changed while I was watching.  The new screen said he had never had updates and had never checked the updates.  News for me!  I tried: auditor of the system files, the tool update system, KB3172605, KB3020369, 70057, Agent update, stand-alone install all to nothing does not.  System diagnostic tests I run Windows Update show 70490 error, a mistake of service record and SURLog.cab problems and RC data store.  The report shows that they are not fixed by the test on the first screen, but are fixed on the second screen, but still Windows Update won't never checked and never had updates.  I had no updates since July 18. Help!

  Issue edited by the moderator to add clarity.* *.

  Select the hotkey Win + X, and then click prompt (Admin) on the menu drop down. Type cd\ and press ENTER. Type make sure that spaces are inserted as indicated and press ENTER after each line:
  REGSVR32 WUPS2. DLL/S

  REGSVR32 STINKS. DLL/S

  REGSVR32 WUAUENG. DLL/S

  REGSVR32 WUAPI. DLL/S

  REGSVR32 WUCLTUX. DLL/S

  REGSVR32 WUWEBV. DLL/S

  REGSVR32 JSCRIPT. DLL/S

  REGSVR32 MSXML3. DLL/S

  Output

  Restart your computer and run the Windows Update troubleshooting tool

  http://go.Microsoft.com/?linkid=9830262

• Error notification of 'not connected' in taskbar & Windows Update problem

  Under Windows 64 Pro System i5 Intel, discovered the RocketTab advertising program and removed with Spybot.  Next day when I started the system the internet icon in the task bar said "not connected - no available connection", also only shows 'unknown' network connections active in the centre network and sharing, but browser and more program online function still works.  But when I tried to start the Windows Update program, it wouldn't start.  Downloaded Windows Update repair program, it corrects an error in registry but said that he could not fix the program starts.

  I have read several questions on this site that looked and tried a start-up manual of the SSTPS, but received the error 998, also receive the "error 1068: the dependency service could not start and failed to start the Remote Access Connection Manager Service", when you try to manually start the program RACMS.

  Check all services "Remote Access Connection Manager": the following results

  i. Secure Socket Tunneling Protocol Service - error 998 does not start

  II. telephone - running

  III. Plug n Play - running

  IV. Remote Procedure Call (RPC) - running

  v. DCOM - running server process Launcher

  VI RPC end point mapper. -during the execution

  Ran Windows System File Checker and repaired some registry files but could not repair

  "webio.dll"
  

  folder Windows\System32

  If this file is incorrectly routing memory of pagination for the SSTPS at startup and causes the 998 error that stops the remote access connection manager service to start and gives me startup problems with Windows Update Service (and a few other programs that use the same Protocol)

  If it is then I know that I can replace manually, but I don't want any changes manually in the registry if there is a better solution.

  Thanks in advance for any help I get.

  Hello, thanks for the response, it is a stand-alone workstation, no programs have been installed, but looking from the log files, there is a block of HARD drive error which was autocorrected day before it took place.

  So I just manually replaced the "webio.dll" file in the folder window\system32\ on the installation CD and he corrected two errors.

  Sincerely,

  DM_164

• Satellite L650 - 11Z - Windows update problem 800706BE/800706BA

  Hey,.

  I have problems with the automatic update on windows 7 64 bit. I bought this laptop (Toshiba Satellite L650 - 11Z) last July.

  When the computer begins to do the automatic update, there a while and reports the problems mentioned in the subject.

  I tried to find help for Windows support, but there is a statement, that if windows is installed in the laptop before buying it, I should consult the producer of the computer.

  Matias

  Hello

  I found this info on the 800706BE error:
  + Error 800706BA is a standard Windows error with many causes. It more often refers to Microsoft COM Internet Services (CIS) on the call of client DCOM Distributed Component Object Model (RPC_S_SERVER_UNAVAILABLE); the RPC server is unavailable (Windows Event ID) 1722. That's when a RPC request expires and 800706BA error results. +

  I found this here:
  http://www.Symantec.com/business/support/index?page=content&ID=TECH54543

  Here are also a few details and proposals for solution of Microsoft:
  http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-8024000B
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Hope this helps

• HP Compaq laptop: windows update problems

  Hello

  Could someone help please, for the last few weeks where are updates of Windows security and I think that all is well I keep getting messages flashing up to say that updates could not be completed. This seems to be only on some of them, I'm not very tech savvy and have no idea how to do to fix this, it would be good if someone could tell me in simple terms how to overcome this problem.

  Thanks in advance

  John G

  Hi @Johnymac,

  Thank you for your response.

  What is your specific model of HP Compaq laptop?

  There is a link in my previous post to help you find this information.

  If you have a firewall (firewall of Windows example) make sure that Windows update is on the white list. You can also try disabling the firewall and retry the Windows Update to see if that helps.  If it do not forget to reactivate it later.

  Have you checked against viruses and malware?

  Microsoft offers also get help Windows 10.

  Microsoft Corporation / Customer Support

  1-800-642-7676

  Microsoft Support contact us

  Please keep me updated.

• y480 windows update problems

  so I just got this laptop and it the windows update keeps failing and its quite frustrating.

  so, every time I stopped it will download the updates and when I restart it it will try to configure everything, but it fails and go back to the old config and it will just continue to do what it is pretty frustrating, anyone have any ideas?

  Hello and welcome,

  Try this: Re: x 230 problem with config/system updates of windows

  Z.