Film on dvd Creator project. Plays fine in media player. Will not play in the dvd player.

Similar Questions

• Windows Movie Maker does sound on certain songs (MP3), but they play fine in Media Player. I created a movie in movie maker.

  Windows Movie Maker does sound on certain songs (MP3), but they play fine in Media Player.  I created a movie in movie maker.  Imported (MP3) songs bought online.  Play all songs on Windows Media Player, but once imported into movie maker, only some play.  I adjusted the volume on every song with no positive results.  Please help :)

  Windows Movie Maker does sound on certain songs (MP3), but they play fine in Media Player.  I created a movie in movie maker.  Imported (MP3) songs bought online.  Play all songs on Windows Media Player, but once imported into movie maker, only some play.  I adjusted the volume on every song with no positive results.  Please help :)

  ====================================
  Just because a media file plays in Windows Media Player
  does not ensure that it is compatible with Movie Maker.

  In fact... Movie Maker has problems with MP3 files... better
  bet would be to convert the files to the .wma format before
  import into Movie Maker.

  The following freeware program can perform the conversion:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your clips of music on the main screen...

  Select "At?" / OK...
  (the? is the format of your choice)

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  John Inzer - MS - MVP - digital media experience

• How can I recover a .ts file that will not import into Movie Maker? The .ts file works fine in Media Player... help

  How can I recover a .ts file that will not import into Movie Maker?   The .ts file works fine in Media Player... help

  Hi Stuart,

  We understand that you try to import a .ts file to Windows Movie Maker. However, Windows Movie Maker does not support this file type. You can click on the link below for more information on what file types are supported by Windows Movie Maker:

  Can what types of files I use in Movie Maker?

  Kind regards.

• Try to do a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  Original title: how to change system locale

  So I'm doing a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  I know how to do it manually. but I would like to create a program written in Java (or batch) to speed things up.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

  I recently used a dvd + rw disk to back up my photos. Now when I put a dvd in my pc, why it will not display on the screen that's all there is, or how to give me access to it?

  Depends on what you used for the backup.

  If you used the windows backup or another backup software will contain the entire disk will be a backup file, and view/use this file, you use the same software that allows you to save.

• Media Player11 will not play video (DVD disc). The sound is fine and a DVD decoder was installed.

  Where to start... After you download the necessary drivers and also I was able to get my sound work. Then, I bought and downloaded the dvd decoder, InterVideo DVD XPack. When I put a DVD in the drive, Media Player appears and I press play and I hear the sound but I do not see any video!

  I tried to download and use other video players, but none have worked so far. Everyone give me reasons why they can not read/play the disc or separate errors. Some have suggested that I change my screen resolution or color quality. I have and nothing makes a difference. Only, I can choose between 800 x 600 or 1024 x 768 (16-bit or 32-bit).

  Product # RUA769UA

  Pavillion dv2000 CTO notebook

  OS: XP Home SP2 64-bit

  Any help would be appreciated!

  The fixed! I downloaded the graphics driver and everything works well so far.

• Windows Media Center will not play a DVD, I get video with a loud noise and no soundtrack.

  When you try to play a DVD in Windows Media Center or media player, the video starts, but there is a loud cracking sound with no sound of music.   This Media Center has played the DVD in the past.
  My system is: Vista Home Premium
  NVIDIA GeForce 8500
  Hauppauge Win TV HVR-1600
  Realteck HD audio
  ViXS Pure TV - U 48BO
   
  I checked these devices using HP Hardware Diagnostic tools and they work.  I uninstalled the drivers and reinstalled.  Also updated all the drivers.

  Reading this forum, I tried to delete the file from library: %LOCALAPPDATA%\Microsoft\Medial Player

  So far, nothing has solved the problem.

  Thank you for your response.

  I went through the steps.  He has not fixed the problem.  The good news is that I stumbled upon a fix.  I've uninstalled and reinstalled the Realtek Audio drivers.  Which corrects the problem.

  Thank you.

• Media Player or Media Center will not recognize DVDs, but will play CD

  I've had my laptop for about a year now. The media play would play a DVD without problem. Up to what a month ago I noticed that it would take more time and more time for the Media Player play a DVD. I can't have the media to listen to anything except a CD. I noticed a rattling when I inserted the DVD. Now he not only recognise a DVD, but when I insert a DVD, nothing will happen. I tried uninstalling the driver rest nothing is that nothing happens. Do I have to replace the whole player. In Media Center, it lists a DVD as being stored in the library, I the HELP JUST DO NOT KNOW WHAT THE DEVIL IS VA ON?

  ONE WITH A SOLUTION? NEED HELP.

  Hi Roy,

  Welcome to the Microsoft community.

  Apology for a late reply.

  I suggest you TURN the Windows media feature in the list of Windows features in Control Panel. Check the results. Check out the link and follow the steps to do this:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-cannot-detect-DVD-error/6246f256-A272-4450-8F3C-344631773cac

  Please let us know the results.

• Windows Live Movie Maker plays a fuzzy imported .wmv file, which plays totally fine on Media Player

  Hello

  
  I have Windows 7 and I'm trying to 'sting' 3 whole .wmv files in a movie. (You know, a very basic edition!) One of the files (once registered online or webinar) .wmv appears blurry on Live Movie Maker, but totally fine, clear plays in the drive Media.  Why?  Here are the properties of the file.

  
  Can someone help me solve this?  Thank you!

  Another possibility is that Movie Maker is just having trouble viewing clip Webinar.  Webinar clips using a different compression standard since they do not have a lot of changing information.  In addition, your screenshot, it is clear that the clip is in 16:9 or 4:3 aspect ratio, then maybe when Movie Maker it resizes to the preview, it causes content to blurs.  This is highly visible when you have the text slides where there are many small details.

  As noted by J of volunteer work, you can try to convert and combine clips using Freemake Video Converter.  That could help.  In addition, you never said if you saw this blur in the preview, in the final movie, or both.  If the problem is in the preview, you could ignore it, especially if the video arrived at the final is very good.

• video error in media center, will not play videos or DVDs

  I cannot read the DVD, Live TV, or ripped movies in Media Center on my computer (64-bit) of W7. I just upgraded to W7 (64-bit). However, I can play all content in Media Player. I read somewhere that MC uses 64-bit and 32-bit codecs MP codecs. Can I register the 64-bit codec or fix them somehow without completely re - install W7?

  I found what was the cause of my video error message in MC. I had to disable the functions of exclusive Mode on the Advanced tab in the Audio properties for my audio device.

  1. right click on the speaker icon at the bottom right of the screen

  2. click on playback devices

  3. Select your audio device by clicking on it.

  4. click on properties, below on the right.

  5. Select the Advanced tab.

  6. the functions of exclusive Mode deselect the option and click on apply.

  Who did it for me. Everything works 100% now. Finally!

  Hope this helps you or someone else here with the same problem.

• Windows Media Center will not play my video/DVD

  I tried to play a video/DVD on my laptop and got this error:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I went to the Device Manager in the control panel and everything was listed as up-to-date and working properly.  What should I do?

  Hello

  Thank you for contacting Microsoft Answers.

  It is obvious that the DVD is protected against copying. Therefore, you cannot copy the contents of the disc. But to read the DVD, you need a suitable decoder. If it is missing/corrupt/out of date, you may need to install the most recent.

  Have you installed the readers of third party DVD like PowerDVD, WinDVD, etc.. ? If so, it should work.

• PRE10 project burn as blu - ray but will not burn on DVD.

  I created a project of still images in PRE10 with 30 NTSC-HDV-HDV 1080i settings.  I burned the project as a blu - ray player, and it turned out great.  I tried to burn the same project on a DVD and it goes through the process of encoding very well.  However, when it comes to actually burn it to disc it fills about 5% and then abruptly ends saying the burn is completed even if none of the files are written to the DVD (it is always empty).  The same thing happens when I try to burn the project to a folder (no files are created).  I created other projects with this setting and can't seem to burn to blu - ray or DVD.  Any ideas on why this is happening?

  Welcome to the forum.

  As a test, and perhaps as a viable production flow, can you share your HD Timeline to an AVI DV widescreen file? This process completed, giving you a DV - AVI Type II removal w / 16-bit 48 kHz PCM/WAV multiplexed into a single file?

  If this is the case, then the new project, choose NTSC or PAL, depending on where you live, DV Widescreen project w / 48 KHz Audio. Import this DV - AVI file in the new project. Use the SD value of your choice to create Menus, make your chapter markers and marker Menu, with no marker to stop at the end of the timeline Menu. Burning this project to record and test with a software DVD player. Does it work?

  If your still Images have been scaled for an HD (your BD project) project correctly, there should be no need to re - fit the DVD, but if they were imported at full resolution of the camera, then you should follow the advice of Neale. Although the burnt end comic book project, have tons of unused pixels is a real load on your system, and when you have to down-scale considerably for the DVD project, it may be that more than the computer can handle.

  Good luck and please report on how will this test.

  Hunt

• A Blue Ray disc with a digital copy of the film sends me to a page to update Media Player security, but the button updated it does not work

  I bought a 3-disc Blu - ray Star Trek film set.  The 3rd disc is a DVD-ROM with a digital copy of the film, for transfer to a PC.  When I try the transfer, there is a message saying update Windows Media Player to my system with the functions of security necessary to play protected content.  Then a link in the transfer of Star Trek dialog box sends me to http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp where there is a button to upgrade.  But it is faded, as when a disabled function is grayed out...  If clicked, the button will not activate.  What should do?

  I ran Windows Update and updates was not available in Media Player.  I have Windows 7 Starter on a netbook Gateway

  1/2 hour later, well, what do you know?  After many attempts and refresh in Internet Explorer, the upgrade button finally loaded and worked.  Problem solved.  Transferred film and plays very well.

• DVD/RW will not fit in the drive

  I have a HP Pavilion Slimline computer to desktop PC model 5508. I had this computer for about three years. Since I've owned this PC, I could never DVD RW ((+) or minus (-) sign on my hard drive.) No matter if it is a blank disc or record something on this subject.  It finally register, but it takes forever. Sometimes it will not charge. I tried all the troubleshooting tips that I could find at HP and the internet. Believe me, I tried everything. No matter what brand of disc it is, it will not be loaded to the top. All I hear is my drive hard go CLUNK CLUNK as it tries to read the disc. What gets me, is that any other type of disc gives me no problem. DVD-Rs, CD - R and CD - RW all work fine. It's just the DVD RW.

  If anyone knows how I can solve this problem, please let me know. It would be greatly appreciated.

  Fine thanks

  FRED

  [Personal information]

  Hello @FREDTHEDUCK,

  I see that you have had a problem with your optical drive DVD RW read not correctly and you are looking for assistance. Looks like you've been at this for awhile and have excluded most of the options. According to the HP Pavilion Slimline s5508uk Desktop product specifications page is not optical drive support duel layer DVD layers only single I'm curious if you tried DVD + RW SL disks on this computer. DVD + RW DL discs are not supported at all, so I can see that being a problem.

  If you did a cover of the complete plant since this issue started and you have tried the unique DVD layers and still have the question I assume that you have a faulty DVD burner and it must be replaced.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!

• HP DJ 2540 was the fine print - now, it will not print at all.

  HP Deskjet 2540 - model #: SNPRB-1204-02 Ser #: [personal information]

  Can you help me?

  I spent three very frustrating days with my printer.  Printer worked wireless fine and usb connected until about three days ago.  I've had it for a year and it worked very well for all this time.

  Now, it does print from my laptop. My wife's cell phone can print without problem wireless in another room.

  Here's what I've done so far.  I uninstalled and reinstalled the HP software from the CD drive four different times. It installs and seems to connect properly.  Printer appears in "devices and printers".  It is not a test print.

  I installed all the updates on Windows 7 Home Premium X 64.

  I ran doctor Scan six times.

  I run scans on network for problems.

  I wipe my laptop and do a fresh install (I do each year).  But I did only 3 months.  Really don't want to do this again.

  I have nothing seems to fix.

  The printer connects to the laptop, it can be connected to a network printer. But no printing.

  It is simple ceased three days ago.  I don't remember the changes or warnings.

  I'm a little tech savvy and is not afraid to test - but I've exhausted what I can do.

  It seems to be a problem with permissions on my laptop but I can't in this case.

  I am a pastor and I use my printer almost every day.  I'm desperate for a solution!

  Joe N Tucker

  Found the answer in the forum.

  To use a different print driver for printers HP with Windows 7:
  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9. Select Deskjet 450 in the second.  If the 450 driver is not there, use the Deskjet 990c printer driver.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

  Work on the two connected usb or wireless printing.  You don't have to change the 450 driver.  I do not know why the pilot of 2540 worked for a year and all of a sudden 3 days ago stop working-, but he did.