Film shot using Windows Movie Maker in part cut off

Similar Questions

• Film shot in Windows Movie Maker crashes after 6 seconds during playback in Windows Media Player

  I have a film created (1 minute, 20 seconds) in Windows Movie Maker of two short videos to YouTube.  The original files were .mp4 files and I converted the .wmv files.  I cut 7 seconds since the start of the first video and just linked the two original videos into one.  No special effects.  Plays well in Windows Movie Maker.  Save the file as an .mswmm file (required by Movie Maker) and then published as a .wmv.  When I play it in Windows Media Player, he plays for 6 seconds, then freezes, but the bottom bar is moving, as if he is playing.  I tried to do the same thing without clipping 7 seconds from the beginning - same result.  I used WINFF (free Converter).  Any ideas?  Thanks for your help.

  Hello RachelPierce,

  1. what happens when you try to play the files with Windows Movie Maker?

  This problem can be caused by codecs supporting not the file that you created. If you use a converter, I suggest that you convert the files to MPEG format and verify if you are able to play the files.

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Using Windows Movie Maker on the error message XP__ not indexed _ bad quality

  I use Windows Movie Maker XP (version 2.1?).  I've converted and imported a lot of videos.  I have a group of short videos recorded the same day.  I (with free STROKE) converted to AVI and they play with no audio and several play accelerated.  I've then diverted to ASF and some of them imported correctly.  Most of them gave me an error message that they were not indexed.  I downloaded several things to remedy this from online forums: I uninstalled K-Lite pack codec, Expression Encoder 4, WinDVR AVI, DivFix, lame and a number of things.  That's a family movie, I spent a lot of time on it.  If anyone can help with my old hardware and software configuration at this point I'd appreciate it.  The original film seems to be of much better quality than what I am able to import.  Thank you!

  The most reliable video format for Movie Maker is. WMV.

  No guarantee... but the following freeware converter
  may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  Good luck...

• I can't publish a file using Windows Movie Maker despite after every single step and instruction

  I use Windows Movie Maker c. 5.1. (Build 2600) on a computer running Windows XP Professional 2002, SP 3. I try to publish a movie file which is a revised version of a WMV file. In other words, the original file is a file WMV is 534 MB.  I am editing the film by dividing and by deleting scenes, adding transitions and titles.  I am able to save the file (for a WMM file) but impossible to publish the movie.  I checked that (i) the files are in the correct location, (ii) the file does not exceed the limit of 4 GB, (iii) the destination does not exist (I tried everything from my desktop to video files).  I tried every possible resolution and the file type.

  I would change the software of movie at this point if I had not invested so much energy and time behind this project.  Help, please!

  Hello not happy with WMM,

  You get an error message when you try to publish?  If so, what is it?

  One thing you might try is breaking your video into 3 or 4 smaller sections and see if they work / will be published separately.

  See you soon

• I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  =========================================
  The info... copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Unable to capture HD video using Windows Movie Maker or Cyberlink Power Director of Canon HV30 on I.Link (firewire)

  Canon HV30 HDV Capture Issues Firewire in Win 7 (64-bit)

  There seems to be a problem with Windows 7 (64 bit) in the HD video capture from a Canon HV30 on I.Link (firewire). The camera is detectable, but I am unable to capture videos HD using Windows Movie Maker or Cyberlink Power Director. All the drivers and the software updated.

  Same camera, same editing works very well under Win XP.

  Someone at - he a workarouonds?

  (1) the question arose on January 20, 2010, when I got my new computer (Dell XPS 9000) WIN 7 (64-bit) and I first tried to capture video, I had already shot with the Canon Vixia HV - 30.

  (2) the updated capture in place according to the manual of Canon, using the firewire interface to download video using Power Director 7 or Windows Movie Maker.

  -Power Director 7 is able to detect and control the camera, however once the capture begins an error message appears saying that the i-link on the camera mode is not compatible with the Strip to be captured. Verified media is HDV (60i) and playback camera settings are all correct.

  -Windows Moview Maker is able to detect and control the camera, however, no video is captured and no error message appears.

  (3) will try to reinstall the drivers for the HV30.

  Kind regards

  Blarney

• All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  Hello

  1. What is the format of the video file that you use in Movie Maker?

  2. do you receive error messages when you try to play the video?

  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker.

  You can use your favorite search engine and download third-party video editing software to convert the file.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also consult the following articles:

  Problems with importing files into Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Hope this information is useful.

• I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista...

  I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista. I was able to burn the WMV to a DVD file but I'm not able to watch on my DVD player.  It plays ok on my computer.  How can I burn a file to a DVD and be able to continue to watch on my DVD player?

  If you're running Vista Home Premium or Ultimate
  You can try using Windows DVD Maker.

  Windows Vista - disk to burn a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - demo: disk make a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-make-a-DVD-video-disc

  If you don't have a DVD Maker, you will need DVD
  Creation software. The following freeware peuvent
  be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• I'm unable to use windows movie maker to edit my clips.

  I want to use windows movie maker to quicktime footage.
  How can I change the clips to make them open with windows movie maker?
  How can I change a whole?

  I want to use windows movie maker to quicktime footage.
  How can I change the clips to make them open with windows movie maker?
  How can I change a whole?

  ==============================
  The following freeware program to convert
  your .mov to .wmv format files.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your clips on the main screen .mov...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problem with the sync audio to video when you use Windows Movie Maker version 6.0

  I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD.  I've noticed that the audio and video are out of sync, ONLY after the first thumbnail.  No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?

  Hi Fabian119,

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.

  You can visit the following links for more information on codecs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.

  Convert music, videos and photos from one format to another

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• It is allowed to use Windows Movie Maker to create and edit videos Youtube Monetizable (commercial use)? »

  (By Microsoft), it is allowed to use Windows Movie Maker to create and edit (titles, effects) of Youtube videos that will be Monetizable?

  Yes, but the videos should be your property made/saved by you and not fact/record of others.

• I use Windows Movie Maker on Windows 8 computer and when I put in a video and you try to look at it, it appears black with no audio signal. How can I fix it?

  I use Windows Movie Maker on Windows 8 computer and when I put in a video and you try to look at it, it appears black with no audio signal. How can I fix it?

  Hi Michael,

  Thanks for posting your query on the Microsoft Community.

  Because the problem is specific to a particular video file or all the files?

   

  Follow the methods and check them off below if it helps:

  Method 1: Reset the Windows movie maker for default settings and check.
  To restore the default settings

  1. click on Toolsand then click Options.
  2. click on the tab that you want to reset the settings and then click on the default settings.

  Method 2: I suggest you run the audio Troubleshooter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab3&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3: repair of Director and check

  Follow the link as reference below:

  https://support.Microsoft.com/en-us/mats/video_freezes_or_crashes

  Hope this information is useful.

  Thank you.

• How to make a dvd using windows movie maker

  How to create a dvd with movie maker. film downloaded from camara tried to create a dvd, but it won't let me it will only do CD that I can't read on my computer or dvd player

  The only version of XP WIndows Movie Maker who has
  a DVD option is WIndows XP Media Center Edition 2005.

  You need DVD creation software to create a DVD-video...
  the following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• How can I change the format of a film shot in Microsoft Movie Maker?

  Help! Windows Movie Maker: convert a file

  How can I change the format of a movie in movie maker from microsoft so that it can be universally accessed? or uploaded to youtube?

  I suspect you want to view/download the. Project MSWMM file
  which is only useful for re - edit in Movie Maker.

  Try to save your Movie Maker project in the. Film WMV format.
  With your project open in Movie Maker are... try the following steps...

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  The next YouTube document offers guidelines for downloading video:

  Quote: "not bigger than 2 GB and no more than 15 minutes in length"

  YouTube Help Center: for starters: how to download
  http://www.Google.com/support/YouTube/bin/answer.py?hl=en&answer=57924

• Using Windows Movie Maker - background noise

  I am downloading some videos of Window Movie Maker. All the videos have very strong background noise. But when I play videos in real player, the videos play fine without background noise. My husband has used iMovie to edit these videos and has either no problem of background noise.

  Why would there be background noise on Windows Movie Maker only? I really wish I could use Movie Maker to edit movies, since I'm used to the program.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup280.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup280.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...