filmmaker will not completely save in wmv format...
I can see my movie in the slide show and change the format, but when I go to save the file to .wmv format, it takes about an hour to 20 minutes of video, and the only parts of the video will be saved. I only get pictures up to a point, then it goes black, but the music continues to play. VERY FRUSTRATING! As I worked on this video of 20 minutes for more than 3 days! My 1st saved version only played photos for 2 minutes, then kept playing music 18 minutes left. 2nd registered version played photos for 8 minutes, then went blank and kept playing music, 3rd version played for about 12 minutes, then deleted with the music play for 8 minutes... trying a 4th save now! What's wrong?
Maybe some of your source files have compatibility
problems with Movie Maker.
Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:
Photos - bmp
Video - wmv or dv - avi
Audio - wav, wma, wmv
Problem reinstalling Windows XP
I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation. He goes back and reinstall Windows again. I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?
Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.
Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.
I tried to install Windows Vista Home Premium 32 bit on a new desktop computer Acer X 1200 (less than 1 year). Vista recognizes the drive, format and copy all the files on the disk installation. Then restarts, is preparing to launch for the first time and get to the part where it says installation finished and hangs there. The green progress bar does not move and it hangs indefinitely. The hard drive is SATA and I put a new disc in hard, but exactly the same thing happened. The motherboard has no IDE port on it and there is no option in the BIOS for the IDE emulation. At this point I think the motherboard is bad, but I am working also on a laptop HP 1 year with SATA hard drive that does exactly the same thing. The two systems are pre-installed with Vista Home Premium. The two systems see the hard drive, but will not complete installation. I even tried to run the WD Tools Data Lifeguard before installation with no luck at all. There is no error message or error code, just of hangs and end no installation. You have any suggestions for this? Thank you.
What was my problem I bought the equipment... like motherboard, memory, cpu, and video
Vista would not be install.would blow on the end of the installation so I tried to put it natively and it worked!
I'm trying to upgrade to service pack 3 for xp and I get an error message and it will not complete the installation. What should I do?
Please see the links below, to solve the problems with Window XP SP3.
Steps to take before you install Windows XP SP3.
How to troubleshoot a windows XP SP3 Installation failure.
Original title: I have windows xp. What does "drive not valid error 1327: J:\. "means and how to fix it?
I have windows xp and I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears. I have no idea what this means or what to do. I didn't know that there was such a unit, because I can not find it. I hope someone can help. Thank you.
1. are you able to download another program?
2. you have any program installed download accelerator?
3. what browser do you use?
Read the following article that may help you resolve this problem.
Error 1327. "Invalid drive" | Install | CS4, CS5, Acrobat, Reader
Printer laserjet cm2320 will not complete installation, when I use the original product CD. There are several different downloads for Windows 7 (64 bit) on the HP site for the laserjet cm2320 multi function printer, then where exactly should I use (and which are the most up-to-date)? I've seen several posts of 2009-2010 on install problems with Windows 7 - with none of the real solutions to the cm2320 - and I was wondering if there was a fix yet. The printer (2320) appear on my PC (which ran on Vista before my recent visit to Windows 7) and will print with USB cable connected to the printer, but the ends of the installation on the original CD before the wireless configuration, etc. can take place.DBaum
Follow the link I post below, select the operating system that you use and that you choose the correct download. I would like to know if it works!
I've got qcad Professional installed, but vista will not open save dxf files I get a file... dxf is not an application valid win 32.
Is this a common problem?
Is there any solution for this?
You, of course, took umbrage to my last post. For that I apologize, there was no pejorative intention. I am a newbie in the forums and am digging my way along. I have marked your answers answers by mistake, I'll try to fix this.
I solved the problem, I tried to open files in the Qcad application by clicking on the list of recently used files. It will not work in a new session.
The correct procedure is:-
Open click, Qcad - click file - open (this opens the index page of Qcad from the saved files) - click the required file - click Open.
There is no problem, with the exception of this incompetence of users.
Thank you for your time and assistance.
Creative cloud will not completely install on my new computer (Mac). Can someone help me? I've logged into my account and want to bring my creative cloud subscription programs.
You must first install the Creative Cloud Desktop App and use it to install the applications. (see the link below to install)
The links below can help. If you get a specific error, please let us know the details as well as the operating system you are using and what you are trying to install.
I work in InDesign 2014.2 Windows and using the most recent version of the viewer Adobe Content (as of 24/11/15) on the iPad. He sees the folio (unpublished) that I created and some items are appearing. But other items will not complete the download process. They say just 'pending' or 'preparation '. They never get beyond, even after 24 hours. I tried to restart, signing in and out of InDesign and Content Viewer with no luck. I am able to view the full folio in the viewer of content on my desktop and my colleagues are able to download the full folio on their iPads without problem. How can I fix?
I deleted the Adobe Content Viewer app from the iPad and reinstalled. He is currently working.
C4385 will not complete the configuration of Windows. Windows 7 operating system. Netbook for wireless configuration. Installation runs smoothly until the last step, the configuration of Windows. Looking for HPPhostosmartEssential.msi. I can't on my computer. I tried full uninstall and reinstall the software with the same results. Due to the configuration of Windows does not complete, the drivers are not installed and I can't use the printer. Any ideas how to locate HPPhostosmartEssential.msi or how to complete the configuration of the window?
Before the relocation, try using windows install cleanup utlity to locate and remove HP Photosmart Essential. Please click here how it works. Since the documentation mentions on PSprinters, you must find and remove the HP Photosmart Essential.
Click here to download and run this utility. Once you are able to do these steps, perform the reinstallation.
I am trying to save a project with windows movie maker so that I can put it on dvd. Whenever he gets to 92% and then displays one of the following values:
Unable to save film sorry - lack of find the files or remove unusable items in the project
computer does not have enough memory
The file is1033MB & consists of JPEG & MPEG & music files. I'm sure it's the latest version of movie maker had as only the pc since Dec11.Have tried to save low resolution but still no joy.
Any suggestions, this is so frustrating - I removed almost everything from the laptop in order to free up as much memory - showing only 1.42 GB of free disk space. Please answer the easy to understand format that I'm not very focused on the pc (although my son-in-law also tried to solve without success!)
You posted in a forum XP, so I think you
Run Windows XP? I was expecting
an old system of 6 months for Windows 7.
1033 MB would be a huge project file... What is the
This file format (extension)? It is possible
the project exceeds the resources of your
System. Creation of much smaller projects can be
BTW... 1.42 GB of free space is practically none of these
days... maybe it's time for a bigger hard drive. 50%
free space is what I prefer to maintain.
Also... I would suspect incompatible source files.
MPEG files are problematic in Movie Maker. If you
get to use MP3 files for your music... they
can be problematic.
Best bet would be to convert the MPEG files to
before you import into Movie Maker WMV format.
The MP3 files must be converted to WMA or WAV.
Several formats are apparently compatible with
Movie Maker, but the most reliable choices are:
Photos - bmp
Video - wmv
Audio - wav, wma, wmv
There are many converters available on the net... some
free... some detail.
The following freeware converter is just one example:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)
Format Factory (freeware)
(the 'direct link' is faster download)
(the file you want to download is: > FFSetup295.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the final screens)
(Windows XP / Vista / 7)
First, you will need to decompress the file or just open the
Drag > FFSetup295.exe< out="" of="" the="">
and drop it on your desktop. To install left click.
Next, after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
I have a recurring problem in InDesign CS, but this project don't happens only every six months, and I don't remember how I came across the solution from last time. Hope someone might be able to help.
I have a page layout left magazine, that I have used for years with just a couple of blocks of text and a picture. I have not changed in ages content, except to switch text updated with each new issue. (It's just an editorial page, essentially).
Behind this layout, I placed a picture and filled with a beige background. It begins at the gutter (right side) and then reaches the purge in the other three directions.
For some reason, on the left side and at the bottom, I have a domain that will not color fill. If I duplicate the image on the right page, this substantive area extends all the way at the bottom of this page, too. It's almost as if there is something with a text wrapping or a white fill bumping into the outer edges (not the gutter and not by the top) of the page.
For the life of me I can't figure out what it is. I have recreated the spread, started, stopped the program. I paused to screw up my preferences because I hate the idea to recreate. But I have this vague memory, the last time I think than that, it was something pretty simple and does not require screw up my preferences.
I know I'll feel stupid when the answer presents itself - whether by someone on the forum or if I remember on mine. But of course, I do not no progress trying to figure out or work my memory.
I have, moreover, ensure transparency, attributes and effects. Nothing there. I'm puzzled. And I'm in the middle of a date limit. Anyone who has the magic answer? Do not hesitate to make me feel as stupid as you want
There could be a corruption in your InDesign document in this case.
Try the following:
- Choose file > save as
- In Save As Type (Windows) or Format (Mac), select InDesign CS4 or earlier (IDML)
- Click Save.
- Then choose file > open in InDesign and go to the. You have already saved and open the IDML file.
- If everything seems OK, then save this file and use that one.
See above - hesitate to try the Setup again and lose the use of the computer.
If he has problems with the update of Firefox or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.
Download a new copy of the Firefox application and save the file to disk on the desktop image
- Firefox 29.0.1: http://www.mozilla.org/en-US/firefox/all.html
- Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
- Install the new version you downloaded
Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install Firefox.
I downloaded El Capitan and the installation seemed like it went well. Until the progress on restarting bar has reached about 80% and sat stagnant for hours. I tried for many suggestions from community forums. I tried to start in safe mode, it will not actually do. This hampers on this same progress bar. I started by using cmd + r and ran first aid on the hard drive. Everything came back fine. I tried to reinstall in this same Cmd + menu of r, did not help. I tried anything and everything I could find in the last 48 hours between work and what free time I had. I just wanted same day of Mavericks, because something I've tried to run required the most recent OS x is there a way I can just redo the whole download and install of El Capitan entirely? I have no idea of it might even be the cause. Everything went perfectly well and more a game requiring the upgrade.
It is on an iMac 2011 Middle 27 "is far beyond the system requirements.
First, update the firmware if you have not already: computers, which can be upgraded to use OS X Internet Recovery.
Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears. The Utility Menu appears in 5 to 20 minutes. Be patient.
1 select in the Menu Utility disk utility and click on the button continue.
2 when loads of disk utility select the drive (entrance Out-bumpy) in the list to one side.
3 click the Partition tab in the main window of disk utility. A panel will fall.
4. define the GUID partition scheme.
5. set the type of Format Mac OS extended (journaled).
6 click apply, then wait for the done button to activate.
7 to exit and return to the Menu Utility disk utility.
8 Select reinstall OS X and click on the button continue.
My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.
I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.
Any thoughts on how to solve this problem?
Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...
I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry
Now it does not work for everyone but I fixed it on my machine with the following
now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type
in my machine's plug
Reference Dell d6420
Msoft word 2007
printer itself is
HP laserjet 200 color m276
printer driver is
HP LaserJet 200 color MFP M276 PCL 6
I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you
If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations
Maybe you are looking for
I have an iPad 2 Air and should have removed an app store user min. visa card but how?
Im trying to upgrade my Windows XP to Windows Vista. The installation program tells me I must load QOSMIO F30 BIOS V1.30 continuous adjustment. I went to the Web from Toshiba site to load this unfortunately BIOS that I have not found it on the Web si
I bought the new iMac and load it to the top of Time Machine and all is well. But when I opened the pictures for the first time, he finds old photos and wanted to remedy and did so just to leave me this message: the library could not be opened - Phot
indicates the error: 0xc18a0307.refer to the documentation of the printer... the unit is photosmart c5183... tried to switch market but same indication appears...
I bought a new laptop. I connected to the WiFi network with no problems the first time. I have downloaded Microsoft office 2016 (home and student). The next time I turned on the laptop, the icon WiFi in the corner of the screen says "no connection av