filmmaker will not save project

Similar Questions

• CS6 first will not save project

  Hello everyone

  Recently, I made clear my PC and reinstalled windows 10. Came with it a re-installation of Premiere Pro.

  Since then, whenever I'm trying to save my old .prproj files, the backup window appears, but no Yellow progress bar should be seen.

  No matter if I click on 'save', ' save under ' or 'save a copy '.

  I came across this old thread will save not project in which the solution was to straighten out the administrative powers on the files (.mov, etc.) in their respective folders. Unfortunately, this did not help in my case.

  I also deleted the 6.0 file in/username/documents/adobe/premierepro. but it did not help either.

  No more than remove the settings by pressing SHIFT + alt before you start the first had impacted.

  my project in another import was also futile that I couldn't save this one then.

  What helped, has been clear all (files, sequences, etc.) in my project file. After that I could save the file which suggests that there is an error with the files involved in the project.

  (apart from the question saving everything works great however.) I can edit and export any problem whatsoever.)

  I'm quite baffled by moment, because trying to edit my film want to play one of these old games console of the 1980s where you could not save your progress.

  I hope someone has another idea I could try, because now, I am all of them.

  Well, I realized the file .prproj wasn't bad, as the removal of all the clips etc inside has solved my problem. So I took the tedious road and checked basically every folder and subfolder; Successfully (I'm if happy and relieved now it almost kills me).

  I think that I've been using too many subfolders. I had like 10 cases stacked below the other. But it also could have been just a bad file inside project because I went in front of him and just deleted all of these subfolders and their items because I have needed them more never less.

• Project will not save

  Someone had experience with projects not wanting to save?  I said the other day that I have installed Windows 7 64 bit on a second partition, so now I can dual-boot with XP 32 bit or Windows 7.  7 has worked very well so far with the exception of this one project we have (that I had worked on XP in the last three months) will not save in Windows 7.

  When I click on save or press Ctrl + s, save it dialog box appears, but the bar fills never at all and the program stops responding.  I don't know if it is a Windows 7 problem, or just project acting funny for some reason any.  If I have to finish this project under XP, so be it, but I noticed improvements in the time of rendering, etc. with Windows 7 and it uses actually our 8 GB of RAM, so I would stay with her as much as I can.  As I said, the other projects seem to be good.

  If anyone has any suggestions of something to try, let me know.

  Thank you.

  Project sheet:

  CS4, 720 x 480, 24 fps, progressive, 48 k audio.  All clips are decompressed notice leave After effects.  The audio is mostly mono WAVs 48 k, with a few mp3s mixed in.

  I'd be surprised if this will help, but it's a small effort and you do not hit anything if you don't shoot.

  In Explorer to go to the directory that contains your project and source of the material, do a right-click on this directory, select Properties, go to the Security tab and make sure you have full control. If this is not the case, change the settings that you have total control.

  I had once a screwup that caused may rights of access to be contaminated. This helped me to solve it.

• Why FIREFOX will not save my HISTORY of parameters of USE CUSTOM settings?

  It is very very annoying. I'm ready to throw the bucket of bit of this program.
  I use it to access facebook and play farmville. I need to not FORGET things so that whenever I load farm town should not have their server stuff...

  Whenever I open fire fox and go to the who's who and load farmville I get a message that says I can load faster if I allow them to store data on my computer...

  I go into the settings of firefox and find that my history preferences won't save 'USE the PERSONALIZED SETTINGS.

  I need to change every time. I have the 32-bit and 64-bit of Nightly (beta version) on my computer.
  I completely removed those two, restarted windows 7, rebooted again, re-installed fire fox and it STILL happens...

  Why? I'll be darn if I use Solution Explorer, but at least it will SAVE the settings and gets their damn!

  Hello

  See the article How to fix preferences that will not save.

  Make sure you have not a user.js or mozilla.cfg file set your preferences each time you restart Firefox.

  • Also useful: http://kb.mozillazine.org/Preferences_not_saved

  Unrelated to the question: you have multiple Adobe Shockwave for Director Netscape plug-in is installed - some navigation problems may be experienced with several versions of the same plugin. Uninstall older versions.

• My IPAD 4 takes great pictures but will not save the photo

  MY IPAD 4 takes great pictures but will not save the photo

  Don't know what your question, but the changes are saved to a file with the extension. AAE. If you are importing photos to a Mac changes will come with photos.

  Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

• Firefox will not save my passwords for all sites, I checked the options, securtit and marked the box to save passwords. Any suggestions?

  Firefox will not save my passwords for any site. I checked the box 'Save password'. I tried several times over several days.

  Any suggestions?

  Under the Privacy tab, check box "remember history". My sister had the same problem, and this box is unchecked in its version. Please try it out.

• Firefox 8, will not save the username on some sites, is there I can to add a settings file manually?

  For most sites, FF8 records my login information. For some sites, it will not save my username. One site in particular, he used to be saved (I think that I added it to a settings file in an earlier version), but I deleted this user name for connection, and now I can't seem to save my user name.

  Is there a file somewhere that can be changed so that the username appears?

  Thank you

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• Safari will not save history, and will not, leave only force quit

  My Safari will not save history and will not leave. If I try to quit, nothing happens then a window opens upward with an error message and I have to force quit. Safari will not leave for an update of the system either.

  Corruption Safari       See post by Linc Davis

• Using Vista, WiFi will not automatically connect after that reboot - config "connect automatically" will not save after reboot.

  Using my Lenovo with Vista laptop, the wireless re-does not after I stop/restart.

  I checked the "connect automatically when this network is in range" parameter in the configuration Wifi, but the box always becomes disabled after that I reload.  Why this configuration will not save after that I reload?

  How did your problem related to Windows Update?

  Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• IE 8 will not save the history in windows xp

  IE 8 will not save the history in windows xp. All good Internet Options boxes checked/unchecked. System Restore has not fixed the issues. Possible registry problem?

  Hello
  I suggest try reseting IE and check.
  How to reset Internet Explorer settings
  http://support.Microsoft.com/kb/923737
  
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
  

• WMM will not save my video

  I shot a video with a Kodak Zi8 and imported to my computer - this is a MOV file.  WMM would not import it so I converted it to a wmv.  I made the video, adding nothing but a few legends.  WMM will not save on my computer.  What to do.

  I shot a video with a Kodak Zi8 and imported to my computer - this is a MOV file.  WMM would not import it so I converted it to a wmv.  I made the video, adding nothing but a few legends.  WMM will not save on my computer.  What to do.

  ==================================
  What happens when you try to save it? Do you receive
  a mistake? If_Yes_what is the error?

  Maybe the conversion software has not created a fully
  compatible .wmv file.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Settings of the mouse from Logitech G5 will not save.

  I have Win 7 Prof X 64. I worked with Logitech support now for almost 3 months on why my setting of the G5 mouse will not save after a reboot. They had load me 5 different versions of the set point and to make all systems that they thought the change. They even sent me a new mouse G500, which has the same problem. After a reboot, I have to open the set point and close it, make no changes, and all my settings to start working. Set point is in my Start menu & KHALMNPR file is set to no load.

  I have loaded the same software on my laptop, Win 7 Home Premium, and it works fine. It tells me that there must be a setting in Windows 7. Anyone have any ideas? Thank you

  Hello
  
  You are able to save the setting for another application or a program?
  Step 1: Try changing the setting in safe mode, and then restart your computer in safe mode again to check if the setting is saved.
  If the settings are saved in safe mode, then try to perform the clean boot.
  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  http://support.Microsoft.com/kb/929135
  Step 2: You can try to create a new user account and check if the problem persists there.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Step 3: You can also check if the problem persists on the other computer and send back the same.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Photo Gallery will not save the edited images

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  ================================================
  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• The cutting tool will not save anything

  Original title: Snipping Tool will not "Save as."

  The cutting tool is not going to save anything. If I press the icon Save, nothing happens and when I close and he invites me to save anything as soon as I click Yes, it just closes. I checked the registry and file my pictures, that's where it should be. I also ran some scans and nothing has come so far. Someone already had this problem before?

  Hello

  I understand the inconvenience you encountered.

  According to the description, Snipping Tool is not save something.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. Do you receive an error code\ error message?

  I suggest you to scan SFC and check.

  System File Checker.

  You can run the System File Checker tool and check if it helps. SFC scan will scan system files corrupted on your computer. You can read the following article to use the appropriate System File Checker tool.

  Use the System File Checker tool to repair missing or corrupted system files.

  http://support.Microsoft.com/kb/929833/en-us

  In addition, refer to the article below:

  Cutting tool

  The cutting tool: frequently asked questions

  Hope this information is useful. Please let us know if you need help with Windows.

  Thank you