Similar Questions

• E-mail rule does not always work.

  I have attached a copy of this message and the State which must have managed to get rid of it. If I change the rule and apply it, it works, but tomorrow if I get a similar message, the rule does not work. What's wrong?

  Thank you, Fred

  Try to delete the order and leave just the command Delete.  Back up e-mail in the junk mail folder in the Inbox and use the menu option Message ➙ apply rules to see if that solves it.

  

• Despite my spell checker set, it does not in Hotmail and some other sites.

  I have the setting for spell check set up, but it does not work on some sites like hotmail. I'll spell check button in hotmail and it tells me that my browser automatically checks as I type, but it's not. I tried to replace it or to get spelling checked independently, but without a bit of luck, any suggestions?

  Not all locales have a dictionary installed for licensing reasons.
  If you do not have the locale en-US then check that you have an installed dictionary (Tools > Modules > Extensions).

  You can see which dictionary is selected if you right-click in a text box and open the submenu language .
  Also make sure that [[X] "Check spelling" in the right click menu context has a tick.]
  Alternatively, you can try to move on the items 'Check spelling' and the new.

  See http://kb.mozillazine.org/Spell_checking and How to use the spellchecker of Firefox?
  See also http://kb.mozillazine.org/Dictionaries

  You can look here for more dictionaries:
  https://addons.Mozilla.org/Firefox/browse/type:3
  https://addons.Mozilla.org/en-us/Firefox/addon/3366 (The English (British))

• Firefox does not load hotmail. Everyone knows about this problem?

  Does anyone else have problems with hotmail does not?

  URL of affected sites

  Hotmail.com

  I tried and it didn't work. Then I tried to uninstall firefox after saving everything and it worked.

  Thanks for your help.

• FVS336Gv3 multi-NAT inbound firewall rules does not

  I have about 30 Netgear FVS338 and a few FVS336Gv2 routers in use. I use for firewall and provide multi-NAT between industrial machines and WAN. The configuration was changed on Gv3 models and I can't get an answer behind the firewall or router in the diagnostics page when you use the WAN address.

  In the examples below the WAN is 10.62.

  

  Figure 1. Two different devices with two different configuration options.

  

  Figures 2 and 3. The first is bad - it would only connect from this address. Have I set up another correctly to the NAT WAN to LAN 10.3.110.215 address 10.62.31.55 address?

  Q1: Is Figure 3 configured correctly?

  Q2: Why is it forcing me to create a range of addresses? On the older routers, I had the opportunity to address.

  Q3: Is anyone aware of any problem with this router?

  For anyone having the same problem, the FVS336Gv3 requires the manual addition of each new address WAN-side. He is buried in the menu structure:

  

  Figure 1. Network configuration | WAN settings | WAN configuration. WAN1 - Edit.

  

  Figure 2. Select the secondary addresses.

  

  Figure 3. Add the required WAN addresses.

  Now configure the inbound firewall rules:

  

  Figure 4. Security | Firewall rules. Add or change. Note that the WAN secondary addresses are available in the drop-down list address WAN IP.

  Password

  There seems to be a problem with this router about the session timeout. I got them several times on the navigation menu and log on again and renavigate. Idle time-out is set to 90 minutes. I never saw this problem on routers earlier.

  Also, note that the password field now has a limited character set. for example, it does not accept ' $'.

• ACS 'Password change rule' does not work with telnet

  Hello:

  I am configuring users will have to change their password when they enter a network device, the first time they connect.

  I have a camera ACS 4.0, the option "disable TELNET change password against this ACS and send the following message to the telnet users session" is disable. When I try to enter in a Catalyst 6500, for example, I type user and pass and I get rejected (RADIUS is the protocol used).

  In the reports of the CSA, I can see, it seems the following error "Impossible authentic - CS expired password.

  I activated the option 'Apply the password change rule' in group settings, other options for the 'password aging rules' are disabled.

  Thanks for your help,

  Francisco

  You can use GANYMEDE + to get the change of password to work.

  Does not work with the RADIUS.

• Role membership rule does not

  Hi guys,.

  When I create a role and assign 'rule of membership', the members appear in the preview screen.

  But they may not see the place in the screen of the members of this role.

  My environment is 11 GR 2 SP1.

  It works fine in GR 11, 2 base. But some Pack bundle and then it doesn't.

  1. is it normal?

  2. If so, why is it changed?

  3 and how shoul I assign members to the role?

  (as a solution, I modified the memner arrtibute. = > does not)

  and restart IOM, = > still does not

  and restart the server. (> still does not...)

  can anyone help with this?

  Kind regards

  dongsu

  There is a bug similar to oracle support. There is a workaround solution given but the fix for OIM11gr2ps1 would be in BP4 and later versions

  IOM R2 - when we create a basic role of rule in IOM - UI does not show the results in 'Direct' or 'All' (Doc ID 1598658.1)

  Bug 17362271 : IOM R2 - WHERE WE CREATE a ROLE of BASIS of RULE IN the IOM - UI DOES NOT SHOW RESULTS

• Distributed form works does not with hotmail or gmail

  Sorry, if this is in the wrong place, but desperate to find an answer. (This form is about to circulate among a few hundred grade 12 students, who will have a wide range of messaging options.  We have students do not have difficulties to send this form)

  I have a form, distributed, sent people to fill out the form (test first) and submit.  Which I will collect in the entering e-mail response file.

  
  Some fill out the form, send, he calls the window to use gmail, hotmail or office.  They select Office/outlook sends exactly according to the needs. Excellent.
  
  But from time to time, it does not yet give the possibility for the Office or hotmail, it automatically changes to outlook.  Which I think would be OK, if the student is on their home computer and want to send it like that. (but eventually will be their parents email)

  For those who are informed on a school computer and want to use hotmail/gmail.  several problems occur...
  Once they choose the choice of hotmail/gmail, the process does not continue.  Everything seems to disappear, and the form is never received by the expected collector. Never turns in the gmail/hotmail sent file.
  
  One person said, they thought that it went through the process... but the collector never received.
  
  One person said, it doesn't give them the choice... it automatically opens outlook, even if they would have used hotmail instead.
  

  I suspect that most of the students would use a hotmail/gmail account to send the form.

  It's the form, we have created, http://www.SD22.BC.ca/forms/Scholarship_Application_Final_distributed.PDF  

  If it helps to understand what is happening... appreciate anyone taking a peek, even try to present.  Just write on her test, so that we know.

  We are trying to get this ready for the end of February.

  Perhaps recognizing the help... This should be posted on another forum as well. ?

  Total egg on my face.  The people who described the problem for me, left aside the fact that they did not actually read the pop up window that came when they hit the submit button.

  This explains, so why no one really had an answer for me.  The popup window, when you choose 'internet' option indicates clearly that we must save, then fix on the mail program they choose.

  My apologies, there...

  But he did raise the small problem, if someone check marking the 'don't show this'... could cause problems.

• Rule does not fire

  Hi, I wrote a custom rule for checking a failover from the primary to a database of pending. The agent runs very well - without problems. Any other rule based on this agent also works. Information based on:

  The agent collects among other database status - which is a StringObservation. Te PRIMARY, STANDBY PHYSICAL values. Now I will inform each other DBA that a database from the database role.

  Scoping:

  _Table

  Data-driven

  Rule multiSeverity:

  Cond WARNING:

  def statusListe is server. DataService.retrieveLastNValues(scope,"database_role",2).value

  If (statusListe.size == 2) {}

  return statusListe [0]! = statusListe [1]

  } else return false;

  MessageText: whatever it is, all tested (with or without severity-level variables)

  If a failover is taken I don't receive any of my rule. But the condition in the rule editor (Scoped th my database) is true. Actual values:

  return the server. DataService.retrieveLastNValues(scope,"database_role",5).value--> [PRIMARY, PRIMARY, STANDBY PHYSICS, PHYSICAL STANDBY, PRIMARY]

  To test, I changed the rule also hunted time (30 years), but the result is the same - in no case.

  FMS is 5.5.4.7. Tips are welcome.

  Concerning

  Jochen

  Hi all

  solution of the problem of the rule:

  If a rule condition works with the server. DataService and that you do not use the ' #metric / observation #' notation in your rule, the services of the State has no knowledge on the correct extended metric and does not trigger the rule. The solution is quite simple:

  make a false definition with the notation "#". In my case:

  def a = #database_role #;

  It works, the rule fires.

  Concerning

  Jochen

• HFM Calc Manager of rules does not appear through excerpts-> elements of the application

  Dear team,

  We have management rules defined in application consolidation HFM EPMA but during extraction through the workspace using snippets-> Application parts, few of them make their appearance, but not all.

  That's why I wonder that all Manager cal rules are run in the context of Consolidation or not. Please provide steps to check whether or not all the rules of calc manager associated with the application.

  According to my understanding, Manager of calc rules should extract through the workspace using snippets-> elements of Application please confirm if my interpretation is correct or not.

  We are om EMP 11.1.2.3

  Your immediate response is much appreciated.

  Thank you

  Hello. Check in the Calc Manager that the desired rules are rule groups that are marked for deployment. If the rules are not in a set of rules, or rules in some rulesets not marked for deployment, then the rules will be not responsible for HFM.

  Kind regards

  Eric

• Global rules, does not the kickoff when calling service Web CHECKIN_NEW

  Hi all
  
  We are trying to call web services CHECKIN_NEW/CHECKIN_UNIVERSAL with the required fields like the doctype, securitygroup, primary file title etc...
  
  It works fine, but the global rules were not the kickoff.
  
  Ex: Say, we have a rule that says that Field_A is mandatory when SecurityGroup = Public.
  
  But when we are invoking the webservice with SecurityGroup = Public, content is to check-in even if we do not value Field_A.
  
  We need global rules to kick sending and we give the error/warning that there is missing field...
  
  Can you please let us know if we are missing something here, there or another way to get this requirement?
  
  Thanks in advance,
  
  See you soon,.
  V

  Funny... I created a global profile rule that triggers a RIDC for CHECKIN_NEW call (my rule checks for the existence of a value in the comments field), and the call to RIDC fails (as I expected) when I only provided no commentary and works when I provided a comment. If the rule engine is indeed fired.

  I think you must post your profile rule. More precisely, exactly how do you define your rule? I think you use the check box "use default value" for the field, which is incorrect for your use case. Also post the rule conditions of activation. They are also probably wrong for the case of the intended use.

  Please do not ask for examples of code until you post your profile in the rule details.

• My paid AVG does not protect hotmail/yahoo/aol - how can I sync it to make it work please?

  I entirely freed from AVG Internet Security version on my PC.   Despite being checked in all the right boxes for internet protection that I find that he had not checked ANY of my email accounts.  I have a problem with my hotmail and msn messenger.  I have a person showing a 'friends update"on MSN Messenger, which is not on my list of contacts and get e-mail from hotmail contacts that were pirated.

  I contacted AVG who advise me that accounts like Hotmail web-based e-mail, Yahoo or AOL are not protected by their product - but they could be synchronized with windows mail.  Why is this not stated clearly on the box!  The only accounts I have are AOl and Hotmail.  I'm a Windows Messaging account (how?) and how do I syncronise my Hotmail and AOL accounts so that they are protected - thank you.  I use mobile e-mails.

  They told me I was the only person having this problem (cough) - my neighbor has a virus sent through his Yahoo account and it is too with AVG.

  Thank you.

  Your message is in the forum for the users of the software program anti-malware for Microsoft Security Essentials (MSE).  Your question is clearly with AVG rather than MSE.

  Support for Hotmail are at http://windowslivehelp.com/product.aspx?productid=1

  Support for AOL are at: http://help.aol.com/help/microsites/microsite.do

  Support for Windows Live Messenger can be found at http://windowslivehelp.com/product.aspx?productid=2

  And for what it's worth, we do not recommend analysis of e-mail in this forum and MSE does scan email se accounts... MSE checks emails and attachments as they are opened.  http://answers.Microsoft.com/en-us/protect/Forum/protect_scanning/does-MSE-scan-e-mail/2b9dd412-1116-4d28-84bb-ebeab5d28ced

  Kind regards...

• These days, Firefox does not completely Hotmail sign

  Windows Live ID
  Disconnection is not complete...

  You have signed out of these sites:

   MSN Account Services
  

  We couldn't you disconnect from these sites:

   Hotmail
  

  The specific cookie, you need to delete is login.live.com, and you must do this and refresh the page whenever you disconnect, until someone fixes it.

• Base filtering engine does not turn

  Well first of all, today my computer was working fine. Then I turned off and turn it back on later and I tried to use the internet and it would not connect or Windows Firewall. Then, I started to look around for help & support, and I found that it is controlled by the Base filtering engine and I looked and he was off. So, I tried to start it and it wouldn't turn on I got a message that says "Windows has no start the engine service of filtering based on Local computer." Error 5: Access is denied. Now I use a friends computer to search for answers, but I can't find anywhere. The system restore points were not available either, so I couldn't restore it. Please help I've looked everywhere and no luck. I really don't want to recover my computer and lost all my files. Oh and btw I have a Windows Vista Home Premium am I'm on a local computer.

  My problem is still there, but I guess I'm going to just send to HP and the fixed or recovered. I tried safe mode and that has not worked and I tried what he said about Microsoft Support, but no luck.

• Incident rule does not for model OEM 12 c of the Golden Gate (12.1.0.5 window)

  Hi gurus,

  I practice OEM 12 c, I created Incident the rule for the target database Type that works well.

  Today morning, I created model extracted and Manager, GoldenGate and applied on the GG target, after created Incident rule with properties below

  Targets: Oracle GoldenGate. Oracle GoldenGate extract; Oracle GoldenGate Manager

  Article: incoming events and events updates

  Type: Alert metric (selected option button: all events of type alert metric)

  
  

  Add Action: Condition: always perform the actions

  Notice: E-mail me
  

  But I do not have the mail, even I kill or stop the process of mgr/extract

  When I check in the ENTERPRISE > SURVEILLANCE > INCIDENT MANAGER

  I can see the target are down and event showing her stockings.

  If someone body worked on this case. Please help me solve this problem.

  Thanks and greetings

  Jamsher Khan

  Try to use the button simulate rules in the window Incident rules.  It will show you the actions for different types of measures/events.   One thing I see here could be that the target down, will not appear in the alert metric type, this is a category of its own called target availability