Final Cut Studio will not open a project

Similar Questions

• First will not open my project after that I have record in SpeedGrade via Direct link

  First will not open my project after that I have record in SpeedGrade via Direct link

  Last night, I installed all the updates of CC, everything went well.

  All day I was doing the color correction in SpeedGrade to PremierePro project via direct link.

  After I finished, I wanted to go back to first to make an export (my manager was waiting for a sample) only, when the first attempted to connect to the project I worked on SpeedGrade, could not open!

  She the Saturn: "this project has been saved in a newer version of Adobe Premiere Pro and cannot be opened in this version.

  Before panic to my Director of waiting, I've saved every look I did in SpeedGrade as an individual LUT I could manually apply in an earlier version of the PremierePro project. But it took a long time and it's may not be a long-term option.

  What can be the problem between saving in SpeedGrade and then back in PremierePro?

  I PremierePro CC 2015 v. 9.02 (6) and CC SpeedGrade 2015 v. 2015.1

  I'm working on MacBook Pro Retina display 15'.

  Simple... you SpeedGrade 2015.1 (9.2) and PrPro 2015.0.1 (9.0.1). They don't 'work' together.

  You must get your PrPro up to 9.1, 2015.1 release. If your desktop application Adobe CC is not show your 'eligible' for the upgrade PrPro, sign out of it, then back in... that often useful. If this isn't the case, you may need to use the soft Cleaner CC Adobe to remove the application from Office CC & then reinstall it and reconnect.

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Neil

• New computer, existing agency CC project will not open "the project appears to be damaged, we can't open."

  I just got a new computer and my existing projects will not open. I get a message on the launch only: the project appears to be damaged, it cannot be opened.

  I move the same project to my old MacBook Pro, and it opens.

  I move to a HP Z820 with Windows 7 and it opens.

  All use the most recent version of first Pro CC.

  New computer is Windows 10, Lenovo P50, 32 GB Ram, 256 GB SSD boot drive, QXD, Quadro M200M video screen (update driver by suggestion on the web forum). No improvement.

  Any suggestions?

  Thank you!

  Hmmm... I'm looking for on their Web site and for the side PC, see 9.2, 9.1, 9.0.2 and 9.0.1.

  What all people, from the 9 series, I don't see what should be the question. I would expect that you would be able to match the versions using their site...

  Neil

• final cut pro will not load... just wait

  I am trying to load the final cut. It was about 1/2 actually... now it's just says waiting... what should I do?

  HHold Opt - Cmd that you launch the application to reset the preferences. If this is not the case, see if a backup of the library opens.

• Hallmark Card Studio will not open? I have Windows 7. He has been working

  HALLMARK CARD STUDIO 2010 WILL NOT BE OPEN. I HAVE WINDOWS 7. HE HAS BEEN WORKING.

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message when opening it?

  You can follow the methods below and see if it works very well.

  Method 1

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: after a follow-up of troubleshooting Step 7: reset the computer to start as usual

  Check whether the problem is resolved.

  Method 2

  If the problem persists, you can uninstall and reinstall the program once more and see if it works very well.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can re - install the program on the site of the trademark.

• final cut pro does not open

  I can open final cut pro. Everytime I try, it begins to pen, then it is open, and the shot he closes, then editing final say pro closed unexpectedly, please help

  HHold Opt - Cmd that you launch the application to reset the preferences.

• my project file will not open as it was created on a newer version of Adobe Premiere Pro and cannot be opened with this version. What I download?

  my project file will not open as it was created on a newer version of Adobe Premiere Pro and cannot be opened with this version. What I download?

  You should be able to update your version and get things working again.

• Captivate (5) project will not open in the Web browser

  Hello

  In recent weeks, I can not open my projects in the web browser. Accept one of the projects (only questionslides), I searched for different settings but I couldn't find any differtens. When I publish the project in a .swf still the project will not open.

  When I will get an overview in the Web browser or to publish, the project opens in the Web browser and it looks like deletion of project in and out in not even a second. A quick overview of the background is visible. But I get no massage error something. And the White Tower page. To display an overview of the project in capitvate is not a problem.

  I hope someone could help me.

  Roanne

  Hello

  I don't know if you have Animations of text in your project? If so, you probably have problems due to the latest version of Flash Player. There is a fix that is not found in this Captivate blog post:

  Solution to seduce...

  Lilybiri

• Several errors in Final Cut Studio. I just need to reinstall everything?

  Hi, I was tolerating a lot of mistakes in my Final Cut Studio edition for a while now, but I decided to try to correct them, because they really get in the way, I listed below...

  1. I often get errors of the 'out of memory', especially when rendered. Often I just close Final Cut and re - open, then when I make it works fine. Ideally I would not get the errors at all well. Any suggestions?

  2. I use text in my videos, I often put the date at first. I use some plugin text generators that I love. They worked fine for awhile but lately occasionally text randomly goes into random numbers and letters, see the image below, it was supposed to read "February 2016'...»

  Again, I work around him, I'll usually just replace the text and it works but I had rather not encounter the error at all, please advise.

  3. sometimes, usually while I export with compressor, final cut pro all of a sudden don't stop, no warning or error message, it will be just close itself and I'll lose any work not saved. I work around this problem, but just save often but once again, it's a problem that I could do without. It also blocks the export, I have to start over.

  4. as well as the point above, sometimes the export crashes into the compressor without final assembly crashing at all. It stops just export and he said: General error: 0.

  5. I also often get a message that reads 'General error' when I use Final Cut, I think that might be associated with the plugins of text once again, but I'm not entirely sure. Usually when I close Final Cut and re - open, the error disappears.

  My plan is to uninstall and reinstall Final Cut Studio, but I'm just posting this here to see if anyone can enlighten us.

  Also, I have a lot of presets which I don't want to lose in Final Cut Studio, so I wouldn't rather uninstall it but if I have to uninstall, I would like to know what I have to do to keep my presets for example export in compressor settings.

  I know that this is quite a big post, but any help is really appreciated, thank you.

  Here are the details of the machine...

  iMac

  21.5-inch, late 2012

  Graphics card: NVIDIA GeForce GT 650 M 512 MB

  Serial number: DGKKH08LDNMM

  OSX Build: 10.9.5 (13F1603)

  Processor: 3.1 ghz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  It has the following hard drives...

  1.11 to disk fusion, with 692,58 GB of free

  10TB external SAS drive, with 2.9 to free

  Boot disk 12,01 GB, with 4.65 GB free

  I hope that's useful, thank you.

  1. This error can occur if you have formats on the timeline in FCP dislikes, such as H.264 or MP4... basically any codec issue not covered by the program. ALSO... This can happen if you stills that are greater than 4000 pixels.

  2. what text plugin generators do you use? And there was no image below.

  3 & 4... I see that you are running OS 10.9.5. The latest OS fully supported for the FCP 7 was 10.6.8. Each version of the OS after that goes further away from support total and complete operability. That being said, I still use FCP 7 on my machine running 10.9.5, but I lost functionality... Motion and Compressor and Qmaster no longer work.   So well here that is the problem with sending to... compressor Compressor 3.5 provided with FCP does not work on 10.9.5.  You will need to get the latest version... but then FCP cannot SEND to compressor with this version, you need to export a file and then compress him.

  5. who can also be linked to the media format used in the project and more than 4000 pixels of still images.

• New premiere pro version does not open a project because "it was recorded on a newer version.

  I was cutting on my laptop - using the updated version first pro creative cloud. Laptop too slow - so rented an office until I finished this concert. I downloaded the last aps creative cloud on the desktop, including the latest creation of cc pro. HOWEVER, it will not open the other project, as it says in an error message "the project has been saved in a NEWER version of the premier pro", but this version I just downloaded THIS MORNING, it is up to date. How can she have been registered on a newer version?

  Help me!

  Thank you

  Try to update using creative cloud.

• Cannot install Final Cut Studio under Snow Leopard

  I get the following warning when you try to install Final Cut Studio (version 3.0):

  ' - Final Cut Studio Installer requires that your system has 128 MB of VRAM; This system has only 0 MB of VRAM.' and

  ' - Final Cut Studio Installer requires that your system has a Quartz Extreme compatible video card. »

  I find it curious as I used to have FCS installed on this machine - but because of the disk hard failure I have done a clean install of the new. I vaguely remember getting hurt when I upgraded to Snow Leopard (years) but there is a solution because the software was already installed. All the suggestions of the community?

  My specs are:

  Mac Pro 1.1

  2 x 2.66 GHz Dual - Core Intel Xeon

  4 GB 667 MHz DDR2 FB-DIMM

  ATI Radeon HD 5770

  OS X 10.6.3

  A Mac OS X Combo update fixed this problem. The computer was not connected to the internet since installing the new hard drive and I remembered that the video card was not the original. So I connected and performed the update of the software and now Final Cut Pro is fortunately installation.

• Firefox 4 will not open thunderbird for mailto and send links

  I use Windows 7 Enterprise.
  Since the FF4 update will not open Thunderbird when a mailto link or send the link is clicked. My system has Thunderbird selected as the default e-mail client, and these links work in other browsers.

  Following some help online suggestions on selection of Firefox's default mail client:

  http://support.Mozilla.com/en-us/KB/changing%20The%20E-mail%20Program%20used%20by%20firefox?s=mailto & As = s

  There is no option for 'mailto' or 'mail' in the content type window.

  I suffered with this for weeks and finally worked around her.
  Thunderbird has been defined as a client by default, but it does not work with some other customers as well, so I went to Default Programs / set program by default, Thunderbird selected, which was already defined as e-mail client by default, selected "Choose defaults for this program" and click Save. That fixed it for PDF Complete, but not for FF4.

  In FF4, I changed the mailto option always Ask (it was Thunderbird (default)), then selected Thunderbird as client after picking send the link. It worked, so next time I checked the box in the dialog box always use Thunderbird and now it works. Grrr.

• Can I install QuickTime 7 Pro with Final Cut Studio 3 keys?

  Hello

  I try to install QuickTime 7 Pro using my old number of Final Cut Studio 3 series/disks, and but could not find a way to do this.

  FCS is not installed on my Mac (long since passed to FCP X) but sometimes I miss the QTP features. I have the original DVD set with FCS3, as well as the serial number, but want to activate the QT7 pro feature set without having to install any FCS.

  Is - it possible, or I have to buy a 'new' for QTP license?

  Thank you and best regards,

  Bottom

  The installation of FCP unlocks the Pro of QuickTime Player 7 features.

  No other way to do it.

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• CS6 design will not open

  In Design CS 6 V8 will not open / crashes immediately of the Splash screen.

  10.11.6 OSX

  New installation on a new computer

  Process:	Adobe InDesign CS6 [1028]
  Path:	/ Applications/Adobe InDesign CS6/Adobe InDesign InDesign CS6 CS6.app/Contents/MacOS/Adobe
  Identifier:	com.adobe.InDesign
  Version:	8.0.0.370 (8000)
  Code type:	X 86 (native)
  Parent process:	??? [1]
  Responsible:	Adobe InDesign CS6 [1028]
  ID of the user:	501

  Date/time:	2016-06-29 22:55:59.694 + 1000
  OS version:	Mac OS X 10.11.5 (15F34)
  Report Version:	11
  Anonymous UUID:	ECCFBF25-7810-1599-D853-D0C4B8E75E98

  Time since started awake: 2200 seconds

  Integrity of system protection: enabled

  Discussion crashed:

  0 dispatch queue: com.apple.main - wire

  Exception type:	EXC_BAD_ACCESS (SIGSEGV)
  Exception codes:	KERN_INVALID_ADDRESS at 0 x 0000000000000020
  Note the exception:	EXC_CORPSE_NOTIFY

  VM regions near 0x20:

  ->

  __TEXT

  0000000000001000 0000000000005000 [16 K] r-x/rwx SM = COW/Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 com.adobe.InDesign.Text Panel 0x19cb75c2 GetPlugIn + 152114

  1-com.adobe.InDesign.Text Panel 0x19cc20b4 GetPlugIn + 195876

  2 com.adobe.InDesign.AppFramework 0x1a5089c7 GetPlugIn + 189831

  3 com.adobe.InDesign.AppFramework 0x1a5072dc GetPlugIn + 183964

  4 com.adobe.InDesign.AppFramework 0x1a4bed56 0x1a4b0000 + 60758

  5 com.adobe.InDesign.AppFramework 0x1a4dd327 GetPlugIn + 12007

  6 com.adobe.InDesign		main 0x00001ec5 + 341
  7 com.adobe.InDesign		0x00001d55 start + 53

  [cut by the Moderator]

  Yes, it's sort of permissions problem in the original account. See replace your preferences for the paths to the folders where preferences are written (they are HIDDEN in your user library files, so if you don't know how to find them, see library user access hidden files |) (Mac OS 10.7 and later ). You don't have to bother following the direction to reset preferences that link - it will not help-, but the first thing is to try to rename the two files to InDesign and restart normally.

  If this fails, delete the two folders in the original account, and then copy into the account that works and put copies in the original account. This should get ID to open, but it does not guarantee ease of use without flaw.