final value of the timer

Hello

I have a few problems to store the timer values and appreciate all the help I can get.

Set the backround: to collect interval data (time, count) between packets on an assembly.

Needs of: count the number of packets and view the time between packets.

My problem is that when I save to spreadsheet each incriment stuck time power is saved. This could lead to a large number of unnecessary data points. Instead, I want only the last zero no value of the glued power saved timer.

Any help is greatly appreciated.

~ Modi


Tags: NI Software

Similar Questions

  • Any graphical plugin, or other available solution of "CAPTURE a VALUE at THE TIME TO click ON?

    Hello

    I just realized that the query is not my problem.

    I have a graph that uses the query below, and it displays bars showing the 4 different totals revenue market Segment in every bar.

    My requirement is to drill down in this section of the graph and show what amounts to this total.

    I can't add this to the LINK because at the time of the request, the market Segment is unknown.

    Y at - it a graphic plugin, or other available solution that can of "CAPTURE a VALUE at THE TIME CLICK ON"?

    Select the NULL LINK,

    TO_CHAR (to_date (Year, 'YY'), 'YYYY') year.

    sum (decode (market_segment, Advanced Technology Facilities, recipes, 0)) 'Advanced Technology',

    sum (decode (Market_segment, "energy and environmental Technologies", recipes, 0)) 'energy and environment '.

    sum (decode ("market_segment, ' High Tech infrastructure", recipes, 0)) 'high technology Infrastructure. "

    sum (decode (market_segment, "Chemical and Life Sciences", recipes, 0)) 'Life Sciences and chemicals. "

    of apps.xxmwz_apex_rev_5yrs

    Group by year

    order by 1

    I think you just need to change your group clause

    of ' group by year, market_segment.

    for "group by to_char (to_date(year,'YY'), 'YYYY') , market_segment '.

    This is the request of my sample application

    select 'f?p=&APP_ID.:2:'||:app_session||'::::P2_MONTH,P2_STATE:'||trunc(DEMO_ORDERS.ORDER_TIMESTAMP,'MM') ||','||DEMO_CUSTOMERS.CUST_STATE||':' link,
           trunc(DEMO_ORDERS.ORDER_TIMESTAMP,'MM') year,
           case when DEMO_CUSTOMERS.CUST_STATE = 'VA' then sum( DEMO_ORDERS.ORDER_TOTAL) end as VA,
           case when DEMO_CUSTOMERS.CUST_STATE = 'MA' then sum( DEMO_ORDERS.ORDER_TOTAL) end as MA,
           case when DEMO_CUSTOMERS.CUST_STATE = 'GA' then sum( DEMO_ORDERS.ORDER_TOTAL) end as GA,
           case when DEMO_CUSTOMERS.CUST_STATE = 'IL' then sum( DEMO_ORDERS.ORDER_TOTAL) end as IL,
           case when DEMO_CUSTOMERS.CUST_STATE = 'NY' then sum( DEMO_ORDERS.ORDER_TOTAL) end as NY,
           case when DEMO_CUSTOMERS.CUST_STATE = 'MO' then sum( DEMO_ORDERS.ORDER_TOTAL) end as MO,
           case when DEMO_CUSTOMERS.CUST_STATE = 'CT' then sum( DEMO_ORDERS.ORDER_TOTAL) end as CT    
    
    from DEMO_ORDERS DEMO_ORDERS,
        DEMO_CUSTOMERS DEMO_CUSTOMERS
    where DEMO_ORDERS.CUSTOMER_ID=DEMO_CUSTOMERS.CUSTOMER_ID
    group by
    DEMO_CUSTOMERS.CUST_STATE,
    trunc(DEMO_ORDERS.ORDER_TIMESTAMP,'MM')
    
  • Take the last value of the timer

    Hello

    Looking for a help store the timer values.

    Set the backround: will be used to gather data for tests on mechanical switch lifecycle sump pumps.

    Needs to: number of cycles (lit-shut down-lit), Count time stuck we or off (authorized in time is the estimated time to fill/drain sump), see the amount of time stuck on or off.

    I got all of these features to work, but my problem is that when I save to spreadsheet each incriment stuck time power is saved. This could lead to a large number of unnecessary data points. Instead, I want only the last zero no value of the glued power saved timer.

    Any help is greatly appreciated.

    ~ Andrew

    Here ya go:

  • Time value of the time indicator?

    Is there a property that allows a script read the time value of the current-time indicator?  If so, how?

    Thank you!

    I think it would be fair to the attribute of an hour :

    Alert (App.Project.activeItem.Time);

    Dan

  • Re: Manipulation of the value at the time of the insertion

    Hello

    I have a text field. Once the user value in the text field and press the button to insert the
    recordl, at the same time I like to manipulate the value using the sql function.

    Where and how can I do this?

    Thanks in advance.

    I gave the answer, please re-read my post.

    You could also do it in an after submit computation on the item..What exactly do you want to do
    

    Thank you

    Tony Miller
    Webster, TX

  • sum of column that contains the values in the time format

    Hi all

    I give you a piece of my code below
    SELECT  dif.EMPLOYEE_NUMBER Employee#, dif.FULL_name EmployeeName,
     TO_CHAR(START_DATE,'dd-Mon-rrrr') DOJ ,dif.DEPT_NAME,POSITION , DATE_ENTRAY AttendanceDate,
    
     to_char(DATE_ENTRAY,'DY') day, TO_CHAR(LNE1,'hh24:mi')TimeIn1 ,TO_CHAR(LNE2,'hh24:mi')TimeOut1,
     
     TO_CHAR(LNE3,'hh24:mi')TimeIn2 ,TO_CHAR(LNE4,'hh24:mi')TimeOut2, TO_CHAR(LNE5,'hh24:mi')TimeIn3 ,
    
     TO_CHAR(LNE6,'hh24:mi')TimeOut3, to_char(decode(LNE8,null ,
    
     decode(LNE7,null, decode(LNE6,null, decode(LNE5,null, decode(LNE4,null, decode(LNE3,null,
    
     decode(LNE2,null,LNE2 ,LNE2 ),LNE3 ),LNE4 ),LNE5 ),LNE6 ),LNE7 ),LNE8 ),'hh24:mi')TimeOuts ,
     
     ACT_HOUR Work_Hrs, 
    
    decode(DLY_ABSENT_TYPE,'Late',DED_ABS ,'Late (Deduction)',DED_ABS,'00:00') Late_Hrs,ACT_OVT Over_Time
     FROM jjj_PUNCH_DATA_EMP_LIST trn , 
     jjj_emp_def dif,jjj_PUNCH_CARD_ELEG ele WHERE trn.EMPLOYEE_NUMBER =dif.EMPLOYEE_NUMBER and   
     ele.EMPLOYEE_NUMBER =trn.EMPLOYEE_NUMBER  and   DATE_ENTRAY between '23-Aug-2009' and  '24-Aug-2009' 
    
    I require to find the sum of column  wrk_hrs
    Act_hour or wrk_hrs belongs to table  jjj_PUNCH_DATA_EMP_LIST trn , and the datatype of act_hour is varchar(10 byte)
    the values of column act_hrs, (i require the sum of this column)
    08:00
    07:22
    06:08
    kindly help
    thanking in advance

    concerning
    Oracle user

    Hello

    Thanks for posting the CREATE TABLE and INSERT. That really helps.

    Do you want 19:33 ' as the output? Which makes it look like 19 hours and 33 minutes. Most people would represent 19.33 hours (i.e. 19 more than 1/3 hours) as 19:20 '. Should not the sum of
    ' x: 00 ' and
    'y: 20' be
    "z: 20?

    If you really want 19:33 ', see the solution of Hoek.

    If you really want 19:20 ', then you were on the right track.
    I think that you were trying to do:

    WITH  got_total_hours     AS
    (
         SELECT SUM (   TO_NUMBER (SUBSTR (act_hour, 1, 2))
                    + ( TO_NUMBER (SUBSTR (act_hour, 4, 2))
                      / 60
                      )
                    ) AS total_hours
         from      p
    )
    SELECT        TO_CHAR (FLOOR (total_hours))
           || ':'
           || TO_CHAR ( MOD (total_hours, 1) * 60
                   , 'fm00'
                   )     AS hh_mm
    FROM     got_total_hours
    ;
    

    Looks like you were trying calculate total_hours in a subquery, then use the total_hour alias in a query Super, which is quite accurate. You're just confused on how to write a subquery.
    There are two basic ways to write subqueries:

    (1) WITH clause:

    WITH  sub_query  AS
    (
         SELECT  ...
    )
    SELECT  ...
    FROM      sub_query
    ;
    

    (2) online review

    SELECT     ...
    FROM     (     -- Begin sub_query
         SELECT     ...
         )     -- End sub-query
    ;
    

    Looks like you tried a bit of each method.

    In most cases (this included problem) either one will work.
    Other problems are much easier by using a WITH clause and WITH clauses are usually easier to read and understand, I recommend that you always use a WITH clause rather than views online.

    You can also change the Hoek solution to get the result 19:20 ' without a subquery (or without using any expression complicated, more than once, which is the only reason why I have proposed a subquery). Since date arithmetic Oracle comes from the days, not hours, when the solution of Hoek has calculated the number of hours, you'll have to divide by 24 to get the number of days. If you are using TO_CHAR to fit the time, however, the results can be confusing if the total is 24 hours or more. You might be better off using NUMTODSINTERVAL.

  • Date value with the time to midnight

    Hi all
    I have a requirement where I have to insert the date in a DATE data type column. The requirement must have the value of time too. I have to insert dates with TIME as 000000hrs or 12:00. But I am unable to do so. Whenever I try, he inserts just the date. But if I try to 12:00:01 AM, it inserts. Anyone know why this is happening? Or how can I insert the desired values?

    PS: the table already contains data, and they have the time above mentioned format.

    Thank you
    Lucette

    It is purely a display issue, as others have said.

    When a date is stored in a DATE data type, there's always a component "hour".
    This is the front end of the GUI (like the TOAD) who can sometimes simply display the part of date if the time is 00:00:00.
    for example if we look into SQL * Plus, we can tell him how we want the date and time displayed...

    SQL> drop table x;
    
    Table dropped.
    
    SQL> create table x(d date);
    
    Table created.
    
    SQL> insert into x values (trunc(sysdate));
    
    1 row created.
    
    SQL> insert into x values (sysdate);
    
    1 row created.
    
    SQL> insert into x values (to_date('20/04/2009 00:00:00','DD/MM/YYYY HH24:MI:SS'));
    
    1 row created.
    
    SQL> select * from x;
    
    D
    ---------
    21-APR-09
    21-APR-09
    20-APR-09
    
    SQL> alter session set nls_date_format = 'DD-MM-YYYY HH24:MI:SS';
    
    Session altered.
    
    SQL> select * from x;
    
    D
    -------------------
    21-04-2009 00:00:00
    21-04-2009 10:19:18
    20-04-2009 00:00:00
    
    SQL> select d, dump(d) from x;
    
    D                   DUMP(D)
    ------------------- ----------------------------------------
    21-04-2009 00:00:00 Typ=12 Len=7: 120,109,4,21,1,1,1
    21-04-2009 10:19:18 Typ=12 Len=7: 120,109,4,21,11,20,19
    20-04-2009 00:00:00 Typ=12 Len=7: 120,109,4,20,1,1,1
    
    SQL>
    

    Here, you can see that if we inserted a trunc would date or explicitly a time of 00:00:00 with our date, then that time was properly stored on the database.

    Certainly a user interface issue. ;)

  • Once again the value of the Time Machine

    I did install clean and fresh for the new OS El Capitan, erasing any ssd drive, where I imported all the data external Yosemite Backup by usb drive.

    I used the airport Time Capsule for 2 years in Yosemite and now I want to connect to El capitan, but I wonder if I lost inside TC previous data.

    My field of application must Add new backup of El Capitan, keeping the previous Time Capsule content (of course if there is free space!)

    This may occur for use transport CANADA data if I forgot import specific data.

    How can I join TC El Capitan please? Suggestions?

    Your original (from Yosemite) backups for the past two years are still on your time capsule to the sparsebundle disk image.  You have done a clean install of OS X El Capitan and retrieved the data and the settings you wanted from your Time Machine backup.  What you need to do is then open Time Machine preferences and choose "select disk" - and re - select your Time Capsule.  A new backup will start (and it will be a full backup) - but it will not overwrite your original historical backups of Yosemite - they will remain separate within the sparsebundle.  A quick glance-, it may seem like they are gone - but Time Machine will show you only the backups for the latest version of Mac OS X by default.  You can 'Browse other backup disks' hold down the option key when you click the Time Machine icon in the menu bar.  If you need to restore your whole machine to Yosemite or to a point before installing El Capitan - the "Time Machine backup restore" option in the recovery partition will allow you to review and select the old backups of Yosemite.

    To "do" to ensure that your time capsule is not running out of space.  If space is low - there is a risk of Time Machine, remove older backups.

    If you believe that there is a lack of disk space on the time capsule - another option would be to create a new folder in the root of the time Capsule and name it "old backups.  Drag the sparsebundle existing in the new folder.  The move operation must be almost instantaneous.  Time Machine will no longer see the sparsebundle and will not attempt to clean or to crush it.  When the next backup run - it will create a new image of sparsebundle containing a full backup to the root of the time Capsule.  You can always restore (if necessary) of the sparsebundle you have hidden in the folder "old backups.

    A third option (if disk space is very limited) would be to move the sparsebundle existing in the folder "Old backups" and allow Time Machine to create a new sparsebundle.  At the same time - you can copy the old sparsebundle to another drive somewhere - and then delete it from the time Capsule to free up space.

    ~ Scott

  • brand value in the time table with colors according to the selected employee

    Hello
    My question is
    I created the time table for a class for a bit longer want to filter to the time table used.

    for example. If I select the emp_id he's from, select the list then this period of teaching should be highlighted time table.
    Please can u help me.

    the table name is:-Time_Table
    the columns are:-

    EMP_ID
    CLASS_ID
    SECTION
    SUBJECT_ID
    PERIOD_NO
    DAY
    DATE


    Thank you
    Nisha

    Published by: Nisha Rani on September 3, 2009 02:57

    Published by: Nisha Rani on September 3, 2009 23:08

    Hi Nisha,

    Try this:

    SELECT
    DY,
    MIN(CASE WHEN LEC_NO = '1' THEN
    CASE WHEN EMP_ID = :P1_EMP_ID THEN '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' ELSE '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' END ELSE NULL END) PERIOD1, MIN(CASE WHEN LEC_NO = '2' THEN CASE WHEN EMP_ID = :P1_EMP_ID THEN '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' ELSE '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' END ELSE NULL END) PERIOD2, MIN(CASE WHEN LEC_NO = '3' THEN CASE WHEN EMP_ID = :P1_EMP_ID THEN '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' ELSE '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' END ELSE NULL END) PERIOD3, MIN(CASE WHEN LEC_NO = '4' THEN CASE WHEN EMP_ID = :P1_EMP_ID THEN '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' ELSE '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' END ELSE NULL END) PERIOD4, MIN(CASE WHEN LEC_NO = '5' THEN CASE WHEN EMP_ID = :P1_EMP_ID THEN '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' ELSE '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' END ELSE NULL END) PERIOD5, MIN(CASE WHEN LEC_NO = '6' THEN CASE WHEN EMP_ID = :P1_EMP_ID THEN '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' ELSE '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' END ELSE NULL END) PERIOD6, MIN(CASE WHEN LEC_NO = '7' THEN CASE WHEN EMP_ID = :P1_EMP_ID THEN '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' ELSE '
    ' || SUBJECT_ID || '-' ||emp_id || '
    ' END ELSE NULL END) PERIOD7 FROM TM_TEACHER_LEC_DETAIL WHERE CLASS_ID = :P1_CLASS_ID and SECTION = :P1_SECTION GROUP BY DY order by dy

    As I do not have the structure of your table or any data, I can't test this. Let me know if it works for you

    Andy

  • type conversion of numeric value in the time format

    Hi guys,.
    I have the column called need .i (time in seconds) to convert the numeric value of a column in time format HH. for example 3012 = 00: 50.12.
    How can I proceed even in the front.


    Thank you and best regards,
    Nandu

    Hi Nelly,

    Pls go through the below formula:
    This deffenitely will help you resolve the issue.

    Concat (concat (concat (concat (cast (floor ((COLUMN_NAME) / 3600) as char), ':'), cast (floor (mod ((COLUMN_NAME), 3600) / 60) as char)),': '), cast (floor (mod (mod ((COLUMN_NAME), 3600), 60)) as char))

    Thank you
    Cognet

  • The final value of a variable declaration

    Hi all

    I work through a project that has many different results based on what options the user click.

    Basically, I set up a variable called "totalclicks" and set a tip action to assign the value 1 to this variable whenever a user clicks on the selected items.

    I was wondering is there an easy way to get the final value of the "totalclicks" to display in a report? We currently use an internal server and Adobe Quiz results Analyzer. Ideally, I would have just the user 'show results' as normal and the value of this variable is displayed somewhere.

    Any ideas?

    Thank you

    It would be easier if you posted a screenshot of the slide: are all those click boxes on a slide, or you want to go to the next slide, click on another box click here? I ask this because of your sentence «Continues the slide...» » ?

    No need to create another user variable. Perhaps you understand very well what it means to be a variable: it is just a container, and you can change its value as many times as you want.

    So, if you want the click to increment and move to the next slide, the advanced standard action would be:

    Expression totalclicks = totalclicks + 1

    Go to the next slide

    With the first click var will increase to 1, with the 01:58, etc. In the statement list progress of actions, in opposition to the drop-down list of simple actions (accordion) you do not Increment (ask the devs since many versions to add it, but they can't hear me). This is the reason why you need to the statement Expression.

    Take a look on: http://blog.lilybiri.com/statements-advanced-actions-in-captivate-6-li

    Lilybiri

  • Take the time between two values

    Hi people,

    I have a problem and I know idea how to solve... I need help.

    The problem is I want to take the time between two values max as you can see in the chart.

    For example, in the image that I have add

    4.5 - 1 840 = 2.66

    And enter this value in the 'time between mostra '.

    It's that I want...

    But what I think is very complicated, because I don't know how to take the time correctly and does remove...

    Thank you very much

    Any solution?

    Hi jocuma,

    I tried something and hope that helps u.

    Just create two arrays of temperature and voltage. First of all, I'll get the value of the voltage when it is more of a certain value and that same index to get the value of time and store in the shift register.

    When I get the second higher than the limit value, I'll get time and subtract the previous value.

  • How to pass the value of the run-time file .sh by Oracle procedure

    I have a file test.sh that contain

    #1/bin/bash

    exp test/test@orcl file=/home/oracle/dump/test.dmp log=/home/oracle/dump/test.dmp grants = Y = index constraints Y = Y = (test) owner statistics = none

    Exit 0

    I craete a work called Create_job_proc in this work, I want to pass the value of job_action is the location of the file test.sh to

    /U01/home/Oracle/dump/test.sh and want to spend the test/test@orcl as a variable...

    Please suggest me... how to pass the value of Job_Action which will replace the .sh file content test/test@orcl to the value of the time of execution as scott/tiger@hr

    Thank you much Parth... It works perfectly...

    Thank you all for your help...

  • Recommended value for the BAM data expiration time

    Hello

    Can someone tell me what is the recommended value for the BAM data expiration time?

    Enterprise Server default is 24 hours, but I would like to be able to raise the average runtime instance after several months. Is it reasonable to the value of the time-out value a high value? Or it will have an impact on the performance of BPM/BAM?

    Thanks in advance.

    Best regards
    CA

    Normally, we keep the BAM data expiration time at halfway with 24 to 72 hours. For historical reports that you are looking for the Data Mart / Data Warehouse DB are more logical. This database stores the data forever and takes pictures at longer intervals, normally 24 hours. These data are not in time real normally then because a capture instant is only taken once per day but will give you historical reports that you are looking for. The data from this database structure is almost identical to the BAM DB.

  • FPGA: unable to update the timer on fpga through host.

    Hi all

    I worked on FPGA project. It has several loops paralel and works with some sampling time.

    I would like to change the "timing" on a single loop, it is called loop output. I would like to slow down the loop so that the loop will update the output less frequently. (see attachment - red circle)

    I modified the code by changing the timer by the host. (see attachment - blue circle).

    I did several things such as:

    1. Add a manual switch that allows me to change the time of sampling mode normal (same time of polling with other loops) in manual mode (set the timer number).

    But it did not work all the time. I checked the value on the host, it is always on the same sampling time, even I write the value of the timer to measure.

    2. I changed the strategy by putting the other control connected directly to the timer (without switch) in the loop so that I can change the value directly. However, there is still no luck. The result is not reliable. It sometimes slows down and many are in the same pace as before.

    3. I even put a case in front of the exit structure so it was only updated after sometimes (all 100 or more loops). It is not always useful. I see the speed varies, but it is not as expected.

    The material is piezo readers/engine. But I want to slow down the speed, does not increase the speed. Thus, it should not be a problem.

    I really appreciate if there are any comments or suggestions.

    Kind regards

    Areku

    Hi all

    After consulting with my supervisor, he advised me to spend on intermediate or new control value first. Then, update the value of the control that is connected to the timer loop with this intermediate control value. It will update the value of the timer loop after loop (when intermediary value received from the host and update control connected to the timer loop). It works fine now.

    I don't know exactly the mechanism labview of drafting or updating the fpga through host value. But, it seems to me, in my case, there was a problem of writing a value to the control that is connected to the loop timer where ran in relatively fast. Well, little control ignore/reject the new value because it is busy to execute the loop in high speed.

    Thanks again for the response to my post, GerdW.

    Kind regards

    Areku

Maybe you are looking for