FinalCut Pro Plugin problems

Similar Questions

• OfficeJet Pro 6830: Problem with multiple Pages into one file

  I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

  I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

  Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

  Please advise.  Thank you.

  Hello

  Scan you from the glass flat or the top of the charger page?

  If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

  If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.

• CS6 first Pro installation problem

  I am trying to install the Premiere Pro CS6, but when I do, I guess these files are supposed to be pro first appear (note that I tried to install several times)

  

  I'm running on Windows 10 Pro 32 - Bit x 64 - according to the owner, the problem doesn't force me to do anything, if I leave and you try to install the Premier Pro, the problem occurs, and it is never worked before on my computer, I don't have Add ons.

  It's confusing me, CC said I installed it and I don't have Photoshop installed fine, but Premiere Pro is not, anyway I can fix this?

  Bryson,

  You need an OS to run Premiere Pro 64-bit. It has been like that for quite a while. Sorry...

  Thank you

  Kevin

• GPU accelerated the development of AE/Premiere Pro plugin?

  Hi all

  I am the developer of a prototype video processing algorithm that is currently an autonomous .NET executable.

  I want to create a version compatible plugin After Effects or Premiere Pro of this algorithm.

  My questions:

  (1) should I use the SDK after effects, or the first Pro SDK to develop this plugin? A plugin After Effects run in Premiere Pro as well? Or, conversely, a Premiere Pro plugin does not work in After Effects?

  (2) can an After Effects or first Pro Plugin tap into the power of the GPU? I have to learn CUDA/OpenCL for this, or the Adobe SDK kit includes its own GPU functions?

  (3) what SDK makes it easy to create a plugin compatible multithreading, so that my plugin uses all cores of CPU on a computer?

  (4) is it possible to get a free version of After Effects/Premiere Pro Developer, or do I have to buy full price to develop plugins for them?

  Thanks for any help/answers!

  Hello!

  I'll try to answer some of these questions to the best of my knowledge. Currently, I am also developing acceleration GPU AE plugins, so I had to deal with some of these issues in the past months me.

  (1) AE SDK allows you to develop plugins for AfterEffects (naturally), but these plugins are - with some restrictions - also usable in Premiere Pro. Please download and check the AE SDK for more information, but off the top of my head, I know that scripts JS and several suites of treatment are not supported in Premiere Pro and Premiere Pro uses a provision of different pixel as AE (BGRA vs RGBA for example). So, a plug-in AE can also work in Premiere Pro, if coded properly. What I did was checked in the plugin host, he was called and then by calling appropriate functions. See also the examples of AE SDK, for example the 'Portable' and the 'SDK_Noise' example for plugins that work everywhere in AE and PremierePro.
  On a side note, the PremierePro SDK (AFAIK) only allows to develop native PremierePro plugins that cannot be used in AE.

  (2) of course, a plugin can use the GPU - in this sense there is not much difference between a plugin and a standalone application. There is however no GPU related example in the SDK, only a rudimentary and broken example for pipeline fixed simple integration of OpenGL (example of name "GLator"). But you can of course create your own OpenGL context (preferably a window/renderbuffer hidden) and interface the GPU as you wish. Don't forget the context between native AE and your own GL context switching.
  So yes, it is possible, but you should do all the work yourself, the SDK provides just an empty frame and you must code your own functions to interface to it.

  The way preferred by most is probably (as I said above) using OpenGL and then compile GLSL shaders to run on the GPU. The main obstacle is to put your image of video uploaded to the GPU, so you must read each pixel of the AE pixel buffer, convert it to an OpenGL texture, transfer it to the GPU, then let the GPU do its magic and collated the rendering engine OpenGL renderbuffer pixel by pixel for the AE output buffer. Yet once, focus on the example of GLator to get an idea how to do this (although there are a few somewhat more effective methods).

  (3) AE SDK should be very well already for multithreading. Most a plugin function/reminders are not thread-safe themselves in the SDK because they are distributed and called beyond the hearts of processor as needed by AE automatically. So when used correctly without blocking and callback functions of thread-safe for the treatment of the pixels, as is done in most of the examples of AE SDK, you should be fine at this level I think. If you need deeper control over threads, you have of course to do it manually, for example by a blocking to make call and start your own thread of this (not that good practices, but you should get the idea).

  (4) you must contact Adobe and ask them for a NFR/developer version, but I don't know if they offer it for everyone. In addition, there is a time-limited trial version that should work also with third-party plugins, I think, so perhaps it's an inexpensive way to test

  See you soon,.
  Toby

• Office Jet Pro 8600: problem of authentication on a Android phone net Office Pro 8600

  Hi my name is Jack and I get an authentication problem when setting up my Android smartphone version 5.1 Lollipop printing to Office Jet Pro 8600 with the last service Plugin from Google HP play printing store

  Hi Banhien

  After two days of frustrating trying to get my Motorola Smartphone connect and print on my HP Officejet Pro 8600, I finally saw the light. He seems to think I didn't need to change my home network (SSID) as suggested by the consumer cell phone support to overcome the problem of authentication. Thinking as the phone OS was ANDROID 5.1, it is the necessary IP to it see the printer. My problem was that I kept entering my IP Phones ANDROID for it to see the printer instead of the IP to printers for the phone to connect to the printer. Once I realized that and I replaced the printer IP in the phone, Bingo, it worked 'awesome' with the print service plugin. I want to thank you for the suggestion to use HP Eprint app that I don't know who would have functioned as if I got the IP address in the configuration without the telephone.

  Jack1121

• Cancel the implementation in Adobe first Pro plugin CC

  Hello

  I'm working on Adobe Premiere Pro CC r2 SDK plug-in for develop exporter HEVC_Encoder plugin.

  I modified SDK_Exporter example to integrate our H.265 encoder.

  I did most of the work, I am able to get H.265 encode work.

  But I have not managed to get the CANCELLATION of work.

  First,

  , I worked with SDK_Exporter example. When you press the Cancel button, it penetrates into the 'exportReturn_Abort' condition and it breaks, but is not able to return service (RenderAndWriteAllVideo) the main function (exSDKExport).

  It crashes and no response.

  Secondly,

  I created a thread to update the "progress" of the main function (exSDKExport). progress update periodically by calling "UpdateProgressPercent".

  when the user intend to cancel 'exportReturn_Abort', 'progress' wire back to the main function (exSDKExport) and performs the rest of the code in the main function, after the service (exSDKEndInstance) is not called to release all clothes & to perform the closing sequence. The next RACE is not working properly.

  Please help me to implement CANCEL them installation in my plug-ins exporting Adobe.

  
  

  Thanks in advance
  

  Thank you

  Subash

  Hi Zac,

  I solved this problem. It's hanging in my modified only code. In fact I was without closing my encoder.

  I open my encoder in exSDKBeginInstance () and its closure in exSDKEndInstance.

  Cancel is pressed by the user, the exSDKEndInstance was not called, so my encoder has not been closed.

  Difficulty,

  I moved two Open/Close the encoder to exSDKExport() code.

  Kind regards

  Subash

• MacBook Pro display problem

  Hello members of the community.

  As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

  The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

  I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

  It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

  I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

  In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

  I have the entry level MacBook Pro with the retina, last generation.

  Any constructive contribution welcome!

  See you soon.

  -adreaux

  Hello bernardn753,

  After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

  How to reset the NVRAM on your Mac.

  Thank you for using communities of Apple Support. Good day.

• Need instructions/tips for no Win8.1 on mid 2012 MBP pro audio problem

  Thank you for taking your time looking in my question.

  My Machine: Macbook Pro retina no Mid 2012

  What I wanted: install win 8.1 pro 64 bit on a second SSD completely (without Partition) / replace the optical drive

  My problem: everything works fine, but no sound. Drivers seem to be the cause:

  
  How I installed windows:

  1. I put the own ssd in the main Bay + optical drive with disk 8.1 win

  2. Windows disk initialized and installed windows 8.1 64-bit without errors

  3 install the drivers for bootcamp support

  4 returned the Mac ssd go back to the main Bay and put the ssd of windows in the caddy and then in the optical Bay

  5. starting is by holding alt and choosing between mac os, recovery and boot efi (which contains windows)

  What I tried (all of the following are ineffective):

  1 reinstall/repair drivers bootcamp support from different sources (of the download on the website of apple and the bootcamp assistant application)

  2 reinstall the realtek drivers

  3. how to install intel drivers graphics hd 4000 (found a source who said it would do the trick, there is no)

  4 uninstallation of controller high definition Audio (it always seems to come back)

  5. manually download and install the drivers http://www.stuffedcow.net/files/CS4207_WinVista_Win7_32-64-bit_6-6001-1-30.zip cirrus

  I get the following error:

  

  6. place the ssd of windows in the main Bay

  7 troubleshooting sound (a 99% sure that this would not work)

  8 throw up my hands in despair and uncontrollable crying afterwards (was probably the most effective on 8)

  That I need clarification on:

  I found found some sources say that installing windows via EFI mode causes no sound, but I'm not sure if the way I installed it is considered to be the efi mode as I have never had an option for efi mode. However when I start upward and hold option the name of the windows disk named ' BOOT EFI. Efi mode is how I installed windows?

  What I need instructions on:

  Some sources claim that I need to install windows in hybrid MBR mode however I do not know how I would install windows any differently than the way I did above. How can I go about installing, not in start efi mode, if I want to spend the whole ssd for windows / that I would do anything differently than the steps I listed up there?

  Thanks a lot again for your time and help!

  Windows must be in the main Bay and must stay in the main Bay after installation. You can either use the wizard of BC and create a USB installer which will also create a legacy BIOS/MBR W8.1 (default value for your specific model) or if you choose to do it manually, make sure that the icon of Windows from the installation media, not EFI Boot.

  If you start from the DVD W8.1, the default value is Boot EFI. BC Assistant did a bit of work for you, in order to avoid the is not a good idea.

• Mac Pro start problem

  I have a Mac Pro Tower, that will not start the first time I press the power button, the machine "lights up" in a way that the light in front comes on and I hear a click, however the fans and readers do not engage and the screen is blank. I am then forced to hold down the power button until it stops and hit the power key once again, and each time on the second time it starts. Now I use this equal parts of Mac on the Mac partition and equal parts as a PC, this problem appears when I start in two, but I put in this detail to explain another thing, I have a PC graphics card in the computer. I have all his own CUDA Driver Version that allows me to do it on the mac, but it might have something to do with it. Even if the problem persists when I have my Mac AFI graphics card in the computer as well. I also want to add some other details, nor the mac from the PC partition can go in "standby mode" or the computer goes back to be a brick with just the front light on. (Sometimes the LED keyboard works, and sometimes is not after the mode 'sleep'). In addition, if I restart the computer, it starts well the first time, as well as when I move from mac to PC partition. I tried to do resets of LANDAU and SMC and that has not worked, someone at - it ideas?

  Thanks guys for any input you may have.

  The next time that you touch inside, try to carefully remove the 3 v button cell half hidden behind the graphics card and check the required 3 Volts. If less, a new is needed. You can also use CR2032, which is used for the remote control-door garage and car-door-key original is BR2032.

• Network with the MacBook Pro 15 "problems

  My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.

  2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated

  Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few

  the company's programs, but I mainly work on the Mac side.

  An intermittent connection problem became constant after a week of using the computer.  My router DLink DSL (model 2750B) is two feet away from the computer.  In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem.  IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own.  Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."

  I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine.  I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)

  Any suggestions on how to solve problems, or I would return the computer.  It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi.  I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.

  Thanks for all the wisdom and strategies.  Maggie2012

  Hello maggie2012,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:

  Safe mode

  How to test a question in another user on your Mac account

  Best regards

• MacBook pro space problem

  Hello guys,.

  I have a macbook pro. and it's 120 GB of memory. but the last 2 months I have a problem on the tried device.i and remove a large number of my data to it still mac pro.but says I have enough space.i check specifications. there I found that more then 35 GB is covered with another file.

  can someone help me to make room on the device.

  I mean how can I delete or free up space by deleting other files.

  I give u a screenshot to make u more understandable with the problem.

  guys thank you very much in advance.

  Raza

  

  Hello

  Just to let you know, OS X only requires about 9 GB of free storage space. That does not take into account photos, music, documents, notes, etc.

  Help here > http://pondini.org/OSX/DiskSpace.html

  Restart your Mac after the deletion of data to see a difference in storage space.

• Power Mac Pro 2010 problems

  So I just bought a Mac Pro 2010 and it ran fine for a day or two and then I noticed that when he falls asleep the light never blinks and turn even a problem.

  If the unit is off, when I first press the button there is a click but the led stays off and nothing happens. I have to hold down the power button until there is another click. When I press the button once again, there is a click and the power of fans on and the machine finally starts. Although the chime time seems very long.

  However, when he goes to sleep, the monitor turns off, I can hear the fans turns off but never flashes as it should the. Subsequently, the computer cannot be awakened from his sleep. This happens if the timer is active, I press the power button or choose to sleep in the menu. I have to hold the power button to turn it off completely, then start it again. Also, when I press the power button to restart the same as above occurs.

  I ran Onyx to flush all caches that I left my SSD (OWC E2) my Mac Pro 2008. I also reset the SMC and the LANDAU and also ran the Apple Hardware test. Nothing has helped and no errors not found in one of these trials. I tried simply have a HARD classic in this drive and removed all my cards accessories but that does not make a difference. Even when I start windows via boot camp the same problem occurs with sleep.

  Any suggestions?

  I had a similar with a 2010 6 core Mac Pro problem except that the Mac I never sleep, so sleep was not involved. An Apple Store Genius diagnosed as a button battery failure and, eventually, the PS. I asked that the two be replaced since the support for that Mac ends. It's worked OK since then and at Pick-up, engineering was agreed that, while the battery needs replacement, the real problem was the PS.

  Until the repair, one of the things that helped aims to let the Mac disconnected from the AC line for about an hour. Immediately after it by plugging in, he would sometimes start and then work.

• After El Capitan on new Macbook Pro Mail problems

  Mail doesn't work properly anymore now that I use a new mid-2015 MB Pro with El Capitan.  Non-Pourriel, including remittances from my own account to myself, is marked junk and put in the Junk folder. Mail that is not marked as spam is also put in the Junk folder. I can't find the rhyme or reason for the choice of the filter. I always install the latest updates on all of my devices. Can someone tell me how to solve this problem? Thanks in advance.

  There are two ways to designate as junk mail. One is based on the local 'training' that you used in the Mail application. These emails are marked in Brown, the other method is by e-mail based service provider on whatever rules or databases they use. These emails end up in the Junk folder, but are not marked in Brown.

  The only way to deal with the second type is to open a session in the portal provider email, change your preferences or update the address book provider.

• Version of the Java Plugin problem

  It seems that the last Plugin Java for Firefox 10.0 that works is version U29. However, Oracle pushes 31 as the most recent version and «» But it does not work in Firefox 10. Not really a problem except that your Web page that checks plugins for "out-dated-ness" indicates that the U29 version is "obsolete".

  Going through the process of updating the Plugin Java from this point is a particularly nasty process (from Oracle fault, of Mozilla) which does nothing of value. It can even install the next version, which, as I said, does not work.

  You can correct your web page so that it does not indicate the U29 version is outdated?

  Thank you.

  OK, I added that a firewall rule out for the program, "jp2launcher.exe" and now the plugin works again. I had already created outbound permission for Java.exe early on that it was necessary, of course, for the plugin to work.

  Of course, this does mean that it is absolutely the solution.

  I would like to say that this is probably the solution, however.

  If it turns out that this is the solution, it means that jp2launcher.exe needs internet access SOMETIMES but not always.

  PHEW! What a pain in the @# *...

  And, Yes, I realize that my setup of the firewall windows 7 has contributed to this problem. I just wish that when a program attempts to connect and is blocked windows 7 this would report to me with a dialog box, as they claim would happen, so I would like to know. There is, without doubt, a journal entry created to record the event, buried somewhere in the windows event logging system. A lot of good it does me, however!

  Thanks again to all for your comments.

  It just shows that there is no problem I can't solve that I don't have everything to create myself. A bit like the Government, if you know what I mean...

  Charles.

• Satellite R20 - Memory Stick PRO Duo problem

  I looked and saw a lot of similar posts from users with a similar problem. Unfortunately, most of the answers suggested by looking at the user manual and taking note that the phone does not support the Memory Stick PRO Duo. Technically, that's true. However, many Sony cameras come with an adapter that turns the PRO Duo stick a Memory Stick PRO. These include very well in Flash Media Bridge adapter. The manual also indicates that the drive supports this stick.

  What's weird, is that Windows Vista recognizes the insertion of the memory stick, but he then told me that I need to format it before so I can use it. I don't remember what I used the term, but there was a time eventually (with an older driver and/or the installation of XP?) when I could operate using a tip of reboot or something. No, however, I get boor. The stick (and its adapter) work very well. I can read it using another USB adapter. (Connected to my dell monitor 24 "... so not exactly a portable solution)

  My laptop is the Satellite R20 Tablet and my OS is Vista Business

  Thanks in advance for your help.

  -Michael

  Duo cards have been gradually were they not? I'm sure that the Duo do not support Toshiba laptops. The only solution is a USB adapter, preferably a compact.