Finalis A300D - 16 c - recovery disk and installation issues

Similar Questions

• Re: lost recovery disk and partition recovery

  My daughter managed to destroy Vista on her laptop. Problem now is that she can not find the recovery disk and formatted the whole c: drive. Is it possible that she can get the operating system from somewhere, because she still has his serial number... good job, he's stuck at the bottom of the lappy.

  As I see it, you have no more options like:

  1 the order [Recovery disk | https://backupmedia.toshiba.eu/landing.aspx] Toshiba for the money and wait 2 weeks
  2 get Windows copy to install. All the drivers/utilities Toshiba you can download it from [Page Driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
  If you need assistance in order to install driver, can help you

  The product key that she belongs to original recovery image, that you got with your laptop and it is not a universal key that you can use with each installation of the OS.

  Post edited by: Jeka -?

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means?

  Windows recovery disc 32-bit error code meaning version question

  Hello
  I hope someone can help me. I am unable to boot into windows vista 32-bit, so I downloaded the vista recovery disk and get an oxo error code what it means (thanks in advance)?

  You don't give any info on what was the original problem with the computer.

  You have set the Bios Setup to boot from the CD/DVD drive?

  At startup, it will say press F2 or delete key to go into Bios/Setup, or maybe F12 to go to the Start Menu.

  And have you tried also to tap F8 at startup and choose Safe Mode from the list of Boot Options?

  Use up arrow key to do this, press on enter.

  Browse your Hard Drive manufacturer's website, download software from here and test your hard drive for errors.

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to put the recovery disk and Boot/BCD error

  Hello

  I have several problems, I hope someone can help me.

  While on vacation 7/12, I bought a HP 2000 - 368WM NotebookWindows 7Home Prem 64.eu at the time of the purchase, I did a recovery disk.

  1. After returning, I partitioned the drive, forget the hidden partitions. The disc changed to Dynamic.I, then removed the new partition. OK no problem, start Windows and I have used laptop with no problems.

  2. this weekend I tried to go back to the factory install and meeting boot\bcd error: 0xc000225 when I F11. The other F1 and F9 options work.

  3.I tried to make recovery disks and there no 3 x 1 disk check. HP Recovery Manager - system recovery, restore your computer to the original factory State is disabled.

  What are my options now?

  I can start and use Windows normally.

  Under computer management, when I right click on the drive of Reactivare recovery disk is gray.

  Thanks in advance for your help.

  Miss N

  Hello cloud

  I still couldn't see your link, but I searched and found this, http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html

  I used one, no option 3, and it worked like a charm. My drive is now in Basic system recovery option is returned in the HP Recovery Manager and I can boot into F11. So Bravo to you for motivating me to look for. Thank you. I did my recovery discs and all is well int universe. :-)

  Thank you

  Miss N

  P.S. No lost files, it took 2 minutes to do. I am very happy.

• I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please advise__

  I don't have a windows recovery disk and my computer is affected by virus now, I am also not able to downloat antivirus because some files are missing please notify

  Please see: How to replace the lack of software Microsoft Carey Frisch

• Satellite A300D - create a recovery disk

  Hello
  I have a Toshiba A300D. Recently, I installed the version BETA of Windows 7, wiping my installation of Windows Vista on my laptop, now I don't want Windows 7 more and wants to return to Vista. I still have the recovery partition in drive D, but I don't know how to be: create a recovery from this disk or restore using this straight from the trunk. I tried pressing F11 at the Toshiba flash at startup screen, and who just go to a screen that says "Windows could not start...". "etc, I also tried to go to the Multiboot menu and selecting HDD2, and who does not work either.

  So can someone tell me how I can restore back to Windows Vista, I'm not taken worth losing data as I alll backed up on an external hard drive.
  Where can I get the Toshiva Recovery Disc Creator software anywhere?

  Hello

  He's a bad friend... usually it is not possible to restore the laptop on the factory (in the image of Toshiba) settings if you have removed the Vista HARD drive and not create the recovery disk...

  The recovery disk is THIS essential disk and must be created at the beginning!

  But maybe you're a lucky guy...
  I found this thread with a nice tutorial posted by forum user.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=164927&

  I didn't test it and I don't know if it will work, but I think you're last option... otherwise, you will need to order the Toshiba recovery disc.

• I have a hp compaq pressario c797ee, I not create recovery disk and lost data. Help, please.

  I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.

  Hello

  Please use this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards.

• no boot device found message after that finishing recovery disks and restart...

  I recently bought a new Wester Digital hard drive my laptop HP provided with is death/failed, but now I have no found boot device / error message even after complete installation floppies and disk 4 is ejected.  He did the whole insert the disc 1, 2, 3 and 4, and he went to 100%, then said to remove recovery media and press on continue, so that he can restart and complete the process, but it just reboots the computer, gets the no boot message device and stays there.  There's too much during the night and still the same message.  After disc 4 finished what she also said not to touch anything or do something, so I did everything, he said to do.  The hard drive is new, as I said, and is the same 500 GB which was the one I replaced.  The recovery disc were not created by me, they came with my laptop when I bought from futureshop in late October 2010.  It is out of warranty too, that's why I'm looking for a solution...

  Any help would be welcome...

  I did something else I looked and everything got up and running, so it's all good now.

• Startup/recovery disks and file system Image.

  I know that DO START/RECOVERY disk can be made only once. But not preventing the system from IMAGE files, or would it be the RESTORATION of the file SYSTEM.

  How is my setup.

  The original 1 TB HARD drive came with the PC will be the OS (INSTALLED at the factory) and RECOVERY. And this will be the storage. I'll install a 120 GB SSD to be used as C drive. I'll install the OS from the BOOT/RECOVERY disk on drive C for two reasons. To ensure that it is a CLEAN INSTALLATION and ensure that it is NOT of QUESTIONS if they work or not. Then they will be stored in a place course.

  Then I would be able to do a SYSTEM RESTORE/RECOVERY file. And no longer on the internal memory or external storage.

  Anyone with knowledge of this and a better solution I don't know.

  Disc SSD 120 GB OS 'C '. 1 TB of disk storage HARD drive "D", (OS and RECOVERY will always be INSTALLED)

  The question "what is prevented from make the SYSTEM IMAGE files" - image files may consist of training, but with different software.  Several solutions for this by choosing software that makes the image IE files: Norton Ghost, Acronis, Paragon, etc..

  System Restore is a feature of Windows and does not make use of the same action, but it is useful in the return of the system to an earlier date.

• Windows XP crashed so I rebooted emergency recovery disk and now cannot perform updates.

  Original title: Windows XP Media Edition crashed, I rebooted emergency recovery disk I need to download the updates how?

  How to load XP updates after the failure of the system?

  Hi MrDavidSosa,

  1 manages the Windows XP installation?

  2. are you facing problems with Windows Update?

  3. you receive an error message or error code?

  You can read the following article and check.

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

  Let us know if this information useful.

• HP Pavilion 17 - I was sick, created my recovery disks and a BIG thank you

  After being sick for about 7 days, I was finally able to create my recovery disks on Friday, 1/24.  Everything seems fine except for a couple of pop-ups in the process.  The two pop-up windows had to do with DVD RW drive E one say a word on the listen to what is happening with removable disks and another on plays to see what is happening with the blank discs.  These 2 messages appeared after having burned the first disc, discs later and disappeared before I could answer.  But, I think that the creative process was not serious, because each disk burned correctly, each disc has been verified and message saying something on start-up line was made.

  I also read in my sense that you delete the recovery partition on the hard disk to reclaim space for additional storage.  Is this something rreally what should be done?

  Also my Revovery (D reader says it was modifed 01 24, 2014 at 10:38, file type.)  Why we say that, when I created only the recovery discs?

  In addition, on my HP Support Assistant it said still to creat in 2 sections recovery discs, one in "Updated and developed them, HP messages" in the section «Battery and performance»  I used the printed instructions from HP to create consumer support of discs.  This is - why it still makes its appearance in the HP Support Assistant and I can remove them from there?

  Thanks-Yous of thanks go out to those who have helped me on this site, especially CherylG.

  CherylG, you've been very patient with me for answering all my questions.  I know that I have brought you crazy with some of them!  And I can certainly understand that, but you show no frustration with me in the comments to my questions.  You know, be patient with us, the elderly (laughing while typing this comment).  I know for a fact that I will have that other qustions happen if I can't easily find the answers in the online documents.  I hope that you will help me once again (LOL, laughint outloud here).

  Oh, I noticed the length of time you've been helping people on this forum and the number of responses you have accumulated in this time.  I am very sure that there are many people who have used and still use this forum appreciate your expert help... I know I do.

  Thank you, once again.

  A little encouragement?  I would say that you have provided a lot of encouragement I really needed.  Thank you for your answers to my questions in the post above.  Oh, the information on the HP Wizard program in the manufacture of recovery disks that disappeared.

  Thanks again for your expert advice.

  Take care.

• HP Split 13-g110dx x 2 (E8C34UA: I need HP Split 13-g110dx x 2 (E8C34UA) recovery disk and I live in the Brazil)

  How can I download HP Split 13-g110dx x 2 (E8C34UA) recovery disk

  Hi @leocosta ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your Split 13-g110dx x 2 PC HP and needing a recovery USB 32 GB disk. Here is a link to show you how to and or order the recovery media you need.

  I hope this helps you.

  Thank you.

• Recovery disk and installing the new OS no work

  Hello Sir I m umer

  I m facing various errors I can't correctly install windows or I 2 copy recory error disk recovery & during the process a few times see the files for disk restoreing hard stop and restart said after show error of Boot/Bcd I make my free partitions and delete the recovery and via recovery dvd disc nothing had happened to

  I did HDD Test by pressing F2 and F2 does not work as before it runs in dos mode now and I also takes memory test is fine

  What should I do?

  I restore my Hp laptop using the recovery disk every thing goes fine, but in the last step it restarts notebook or see the boot/BCD error

  I test my hard drive by pressing F2 work in dos mode past Test Ram Test Passed I have 2 RAM inside one also comes with hp & kingston 2nd company ram I have installed myself.

  F11 also show error bcd...

  I try windows 8 last process will restart after I get out of my 1 ram and then I apply the procedure of recovery even disk error (BCD) I install 1 ram and pull for my 2nd ram I do step by step, slot by slot.

  I trace error, a RAM is not ok, after restoring my laptop I handed that ram and system and then work to slow down or block, or I retest ram hp before trace error the hp test was passed (why?)

  I back the Ram.  in those days the Rams are expensive.

  My problem is solved. HP need some improvements in the quality and also extend the period of warrienty as a minimum of 2 years

  HP need to have free customer services,

• HP Pavilion DV4 laptop 3000: lost recovery disk and crashed for laptop

  Hello

  I am from the region of Asia from the South (India) and my laptop broke down and unfortunately I lost my recovery disc.

  As you browse the site, concluded that the cell matching has not been listed. Please guide me to get a new recovery disk.

  Here are my coordinates for laptop and you kindly give details to collect the recovery drive to my nearest service center/order it online.

  Make the laptop: HP Pavilion DV4 laptop
  Product number: LQ389PA #ACJ

  Best,

  Dev

  Try this: http://h10025.www1.hp.com/ewfrf/wc/product?cc=in&dlc=en&lang=en&lc=en&product=5075348

  You are welcome

  Click on ACCEPT as SOLUTION to help others with the same problem *.