Finally connected with wag120 using wre54g but no signal

Hello

I am facing a problem that is my amplifier (wre54g) seems to be connected with "2 blue leds... And when I tried to check the signal in the range expansion chamber I find 2 or 3 signals and when I disable the expander control is the same thing!

I tried to change the interval of 75 router

and I configured the router in G-only mode

The RangeExpander is configured with the same SSID and the same subnet with the router

Security is WPA

My router model number is wag120n

My RE is WRE54G

firmware for both are up to date.

Thank you

I realized that the problem was in the security settings

I changed it to the web

and it works very well

Tags: Linksys Products

Similar Questions

  • I just bought the app for photographers creative cloud when I try finally connect with PS CC, I received an error message that says "no detected subscription. I don't really know how to solve this problem, I used my Adobe ID to connect several times

    I just bought the app for photographers creative cloud when I try finally connect with PS CC, I received an error message that says "no detected subscription. I don't really know how to solve this problem, I used my Adobe ID to connect several times and it just still the same message.

    Your subscription to cloud shows correctly on your account page?

    If you have more than one email, you will be sure that you use the right Adobe ID?

    https://www.adobe.com/account.html for subscriptions on your page from Adobe

    .

    If Yes

    Some general information for a subscription of cloud

    Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

    Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

    -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

    .

    If no

    This is an open forum, Adobe support... you need Adobe personnel to help

    Adobe contact information - http://helpx.adobe.com/contact.html

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    -Select your product and what you need help with

    -Click on the blue box "still need help? Contact us. "

  • I had to restore my phone and now I have to connect with a serial number but I dnt have a serial number

    I had to restore my phone and now I have to connect with a serial number but I dnt have a serial number

    Find the serial number of your Adobe product quickly

  • Connect with Yoigo 3 G, but not with Vodafone EDGE

    Hello

    I have a problem with Blackberry connections:

    My application connects to a Web page and get specific images on this web site.

    My favorite trasport types is:

    Private final static int [] DISABLE_BISB_PREFERRED_TRANSPORT_TYPES = {TransportInfo.TRANSPORT_TCP_WIFI,
    TransportInfo.TRANSPORT_WAP2, TransportInfo.TRANSPORT_TCP_CELLULAR, TransportInfo.TRANSPORT_WAP,
    TransportInfo.TRANSPORT_MDS};

    When to use a Wifi connection, it works fine, when I connect with Yoigo 3 g, it connects with TRANSPORT_TCP_CELLULAR and it works fine, but with Vodafone on BOARD, it connects with TRANSPORT_WAP2 and doesn´t work...

    Can someone help me?

    Thank you.

    Hello, I ve found the solution. For the connection to the web, I specified the header request, because it is only open on a mobile browser. The problem is that I specified connection, User-Agent, accept, Accept-Encoding and Accept-Language, and I just need the User-Agent, as

    Mozilla/5.0 (BlackBerry; U; BlackBerry»
    + DeviceInfo.getDeviceName () + ";" are)... ".

  • Impossible to connect with users using LDAP

    Hello guys

    We recently did a new install of 11.7 OBIEE

    When you configure the protocol ldap everything works fine, I can see the LDAP users and most of the users can connect to the front with the correct permissions.

    Some LDAP users are unable to log on for some strange reason, I don't know the user name and password of the user is correct because the same user can connect to our old environment but not our new.

    Someone knows this problem before?

    Concerning

    Benoit

    Have you tried with the user at the bottom and top case id?

  • Web Client connection with the "Use Windows logon credentials" error

    Hello

    I tried to configure vCenter Server appliance (suse) 5.5.0b.

    I created a user in the console of bash and permissions added to it with access complete the server vcenter (with multiplication), added to the Group administrators and users etc.

    When I manually enter credentials to connect it let me, but when I check the "Session using Windows credentials" box produces an error message:

    «The authentication server has returned an unexpected error: ns0:RequestFailed: IDM threw an unexpected error during authentication: platform Native Error [code: 1213] [] [ERROR_INVALID_SERVICENAME].» The error can be caused by a source of identity with a malfunction. »

    I have the same credentials on my computer as in vcenter (the two without configured AD) [this works with vcenter on windows 2008 server].

    I heard it could be the problem of the lack of reverse dns lookup, but I works perfectly.

    vCenter server and dns server are on the same subnet.

    I know there is already a discussion on this error, but the solution is not sufficient (I use American English characters and as I already said - it works on different vcenter).

    Can anyone help?

    Thanks in advance!

    Here's what I got from support that clarifies the case:

    "Design when we choose 'References using Session Windows' respective user name and password is sent to vCenter using the Kerberos authentication protocol that only works when the Client and server are joined to a common domain.

    The reason why we are getting the error reported in your environment is that key Kerberos for the host of the server vCenter application are missing from the/etc/krb5.keytab file. So, I confirm that we will not be able to make the "Session using Windows credentials" option to work in Client and server only not part of the domain.

    To learn more on Kerberos authentication, see Microsoft Link below.

    http://TechNet.Microsoft.com/en-us/library/cc780469 (v = ws.10) .aspx

    "

  • My Sprint HTC Android mobile phone connects with the supplied USB cable, but the computer says 'No HTC Device Connected'

    My Sprint HTC Android mobile phone connects with the USB cable, but the computer says 'No. HTC Device Connected' so I can't sync...

    Hello

    1. do you have HTC Manager installed on the computer?

    2. have you tried it with different USB ports?

    You need the HTC Sync HTC phone Manager software.

    Method 1: Try again with different USB ports and see if that helps.

     

    Method 2: If HTC Sync is installed, if you get the message "no device connected" in HTC Sync, ensure that your phone USB setting is changed to "Charge Only" to "HTC Sync".

    If the methods above do not help, you can contact HTC for additional help.

    Here is the link: http://www.htc.com/us/support/

  • New HP Envy 4500 will not connect with my computer

    New HP printer shows blue light of connection with my wireless network but the printer connects with my computer (Windows 7 64-bit)

    I tried troubleshooting with doctor without success.  I thought about the restoration to the manufacturer's specifications. but worried about this procedure.

    Confused.

    Help please

    Adnilybrek28

    Welcome to the HP Forum.

    There is lots of useful information to the Web site of your printer.  In addition, the most important thing you can do is to install the full features software for your printer.  The installation process should help you with the login process.

    General instructions to install the printer software

    • Open drivers HP & downloads
    • Enter your printer model information
    • Select your printer in the list of the 'results '.

    OR

    • Enter your operating system from the menu drop-down
    • Click NEXT and scroll down
    • Find the category driver - software product installation
    • Select the base driver, e-print, or a full features software
    • Save the *.exe installation package (s) on your computer

    The files will probably save in the "folder"downloads. "

    If it is available, you can download print and scan doctor and / or other programs of the category-utilities

    TIP:

    Install the utilities / tools first. bit installation packages are smaller in size

    • If you have control of "Admin", you can highlight the package and "double-click" to install it, otherwise just right-click, select run as administrator and install.

    NOTES:

    •         Look at the bottom half of the main Web page for your printer for helpful videos help with the installation of the printer software!
    •         Scroll through the list of videos back until you find the video that best fits your situation.
    • Connection USB: download and install the driver software before connecting a USB cable.
    • Ethernet: connect the printer to the network and (optional) assign the printer IP address to the router. Once the printer is connected to the network, make sure that the printer is on, and then install the printer software.
    • Once the initial installation is complete and functional, check / install category - updated

    There is valuable information about the Web site, including Manual, pages How-to's , Troubleshooting and SOLUTIONS section and alerts and notifications for your printer.  Be sure to take a comprehensive look at what's available.  To bookmark the page.

    Click on the Thumbs-Up Kudos to show that you appreciate the help and time of our Experts.

    Although I strive to reflect best practices of HP, I do not work for HP.

    When the answer is a good fix or workaround, click accept as Solution !

  • SQL * PLUS connects with SQL &gt; question

    People,

    I'm confused on the command. / sqlplus with Oracle database.

    According to my understanding,. / sqlplus connected with SQL > using option 3: sysdba, sysoper, sysasm.

    I connect with SQL > to run the rel853.sql script to create a table PSOPRDEFN but a field "OPERPSWDSALT" did not appear in the table PSOPRDEFN although it is in the Create Table statement.

    I connect with SQL * in the directory/home/user/OracleDB_Home/bin as below:


    $ export SYSTEM_PASS = AccessId/mypass

    $ export ORACLE_HOME = / home/user/OracleDB_Home

    $ export ORACLE_SID = HRCS90

    $. / lsnrctl start LISTENER

    $. / AccessId/mypass sqlplus as sysdba

    SQL > startup

    SQL > @/opt/PT8.53/scripts/rel853.sql

    SQL > select OPERPSWDSALT in the AccessId.PSOPRDEFN;

    It returns: "OPERPSWDSALT": invalid identifier.


    I checked the table PSOPRDEFN that the OPERPSWDSALT field did not appear in the table PSOPRDEFN.

    I tried the sysoper option as below:

    $. / sqlplus AccessId/mypass as sysoper

    SQL > startup

    SQL > @/opt/PT8.53/scripts/rel853.sql

    SQL > select OPERPSWDSALT in the AccessId.PSOPRDEFN;

    It returns: "OPERPSWDSALT": invalid identifier.

    The sysoper error is the same thing with sysdba error.

    I tried the sysasm option as below:

    $. / sqlplus AccessId/mypass as sysasm

    He returned: connection refused.


    Someone told me this connection as SYS causes this error. If not a sysdba, sysoper, or sysasm, use the command. / sqlplus AccessId/mypass cannot connect with SQL >.


    My question is:


    First of all, why is what OPERPSWDSALT did not appear in the PSOPRDEFN table while it is in the CREATE TABLE statement?


    Seocond, if not use SYS which is one of the 3 options, how to run the command. / sqlplus AccessId/mypass to connect with SQL > so that CREATE TABLE PSOPRDEFN correctly?

    Thank you.

    user8860348 wrote:

    People,

    Hello. Thanks much for the reply. I just do the commands below:

    $ export SYSTEM_PASS = AccessId/mypass

    $ export ORACLE_HOME = / home/user/OracleDB_Home

    $ export ORACLE_SID = HRCS90

    $. / lsnrctl start LISTENER

    $. / AccessId/mypass sqlplus as sysdba

    SQL > show user;

    Its release: the USER is "SYS".

    SQL > connect AccessId/mypass

    Its output:

    Error: ORA - 01034:ORACLE not available

    ORA-27101: shared memory realm does not exist

    64 - Linux_x86 error: no such file or directory.

    As we see above, unable to connect to the Oracle database AccessId.

    My question is:

    What to do on AccessId, so that it can connect to the Oracle database?

    Thank you.

    so much for the use that you refuse to actually use COPY it PASTE & so that we can see the whole session.

    In the past, you did

    > SQL > startup

    Maybe the database is out of order & must be started.

    do exactly as below (line by line)

    ID

    sqlplus

    / as sysdba

    startup

    connect AccessId/mypass

    COPY the results from above then PASTE all back here

  • After the password reset. Able to connect with the old and the new OAM password.

    Hi all

    I have it here's the installation program.

    OAM - 10.1.4.2.0 (BP08)
    OVD - User store
    Advertising - Store configuration and policy.

    Here's the scenario.

    I have a user (spokuri) OAM with the password (Oracle123) and im able to connect with these credentials.

    But it's when I reset the password for Oracle1234 for spokuri using the administrator credentials.

    Next time, when I try to connect with these credentials(spokuri/Oracle123) should not allow me to open a session to the User Manager since I changed the password to Oracle1234. Am I rite?

    But, it allows to connect to the User Manager with the old password and the new password.

    Please let me know your comments.

    Thank you and best regards,

    Siva NAKI.

    Hi Siva,

    If the announcement is you user store (even through OVD) then this could be a function of Microsoft:

    http://support.Microsoft.com/kb/906305/en-us

    Kind regards
    Colin

  • Oracle 8/discoverer 3.1 TNS to connect with Oracle 10g

    I installed 3.1 discoverer (which uses the language SQL 3 + version). I added the entry TNS server of Oracle 10 g.

    I need to connect to this server, and it gives me error of TNS.

    I tried to connect with SQL and TOAD, but the same error.

    Can anyone tell me the reason.

    Aqeel Nawaz

    The reason is probably that your client software is too old (and supported in the previous Millennium).
    Only 8.1.7.4 will work with 10 gr 2

    -------------------
    Sybrand Bakker
    Senior Oracle DBA

  • Photoshop asks you the serial number even when I connect with my Adobe ID

    I have a creative cloud subscription and I installed Photoshop and Illustrator. Illustrator works fine, but when I run Photoshop it asks me to put the licensed software. I connect with my Adobe ID, but then it tells me to enter a serial number. I tried reinstalling etc, it does not help.

    The solution: Download Photoshop in English outside Creative Cloud App Manager. I downloaded it earlier in my mother tongue (Norwegian), inside the CC App Manager, and it wouldn't let me Photoshop license. Download in English outside the ACPC, it worked fine.

  • XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon

    someone on this planet knows!

    XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When hovered over with the mouse). tried fix & checked all the rest including the settings found on the masses of internet sites. don't think that this problem is so widespread and not final fix?. someone must know the answer. both computers have norton 360 v6. !. two computers use internet very well through the same network switch. two computers worked flawlessly again, no repairs, no reinstall, not zero other problems ever (always ran 360 and first market backup battery).

    Hello
    I recommend that you search/post this question on the link below:
    http://social.technet.Microsoft.com/search/en-us/?query=networking%20with%20Vista&refinement=112&AC=1
    b Eddie

  • I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

    I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

    Original title: ipod

    You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)

    See also - http://support.apple.com/kb/TS1363

    It will be useful.

  • I usually use my account from Microsoft to connect, but with the new update that I can not connect with her

    After the new update on the login screen it asks a Skype name and password. I used to use my microsoft account to connect to Skype and therefor have no idea how to connect with this new interface. I tried every password I can think and even changed my password on behalf of microsoft and still can't connect.

    Have you tried the login with the Microsoft account option.

    https://support.Skype.com/en/FAQ/FA12081/how-do-i-sign-in-to-Skype-for-Windows-desktop-with-my-micro...

Maybe you are looking for

  • Time capsule not recognized in the utility of the AP

    I have two time capsules air port on the home network. As of today, both work well, with green lights, but neither are appearing in airport utility. It is said: "device not found..." Formerly part of the network. Check it again in the range, turned o

  • Satellite A660-17 t - PC Health Monitor shows the problem with the battery

    I have an A660-17 t I've had since November 2010, I used a good amount, but not always on the battery, I believe that the battery has between 10 and 20 on this charge/discharge cycles. I have updated the BIOS to v1.80 when I got the laptop, everythin

  • HP2000 2b19WM: driver needed SMBus

    HI -. I installed Windows 7, 32-BIT in this VERY BEAUTIFUL HP2000 with a 1.30 GHz AMD E-300 with card mother Radeon HD Graphics. Downloaded and installed ALL the drivers 'available' on the HP site for this model - including upgrading the BIOS. An ele

  • PSU in hp desktops

    all hp desktops accepts a power supply atx stanard, or some of them are owners... If they do now, they did it in the past?

  • "Microsoft Update" critical updates will not be installed.

    I use Windows XP with all updates installed. I recently installed Nero Suite 10. Now when I go to Microsoft "Update" I find 5 'Critical' updates for Net Framework. I tried to install these about 5 times without success. In addition, I now have an ico