find answer using window 7 to run the game online (MoSiang Online)

Similar Questions

• Unfortunately I couldn't find another option in Firefox to describe the problem. I use Windows 7. Since the Firefox update (now I use 16.0.2) when I

  Unfortunately I couldn't find another option in Firefox to describe the problem.
  I use Windows 7.
  Since the Firefox update (now I use 16.0.2) when I use the Google Translator in Firefox, I can't copy and paste into Microsoft Word.
  But when I use it in Internet Explorer, I can't use the copy paste it to Microsoft word (MS Word 2010).
  my e-mail address: [email protected]

  Hello
  Thank you very much for quick help
  It's work with the instruction of Ctrl + C.
  perditer

• Connection cricket MSGM8 phone USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, but cannot find drivers

  Original title: badminton MSGM8 phone to the USB port on my laptop to pis draft.exe

  connecting a phone to cricket MSGM8 USB on my laptop (running Windows XP Pro) run the Add New Hardware Wizard, trying to locate the software for Qualcomm CDMA Technologies MSM, but can not find the drivers, any fix?

  Hi ChristopherStout,

  (1) what is the complete error message you receive?

  (2) is limited only to Cricket MSGM8 phone?

  Method 1: Run the fixit available in the article below and then check if it makes a difference

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  Method 2: If you provided drivers\software disc from the manufacturer of the computer, go ahead and install it.  You can see the steps outlined in the article below

  How to troubleshoot unknown devices listed in Device Manager in Windows XP
  http://support.Microsoft.com/kb/314464

• Code error 8024002d when you use Windows Update to install the update of security for Director 2.6 for windows vista

  I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.

  Alan McC
  Do you have other accounts of users on this PC?  If you install this update from the main account?

  You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
  If sure that nothing else is running, and then install the update manually.  Give it a try and let us know the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. It can indeed not necessary it and
  be able to make a right click on it and HIDE. Let us know what the update is so we can help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Whenever I want to use windows update, I get the error Ox80070424

  Whenever I want to use windows update, I get the Ox80070424 error, what this means and how can I solve this problem?  Also, it won't let me use restore it say there is currently no restore points.  How can I fix this?

  original title: error Ox80070424

  Whenever I want to use windows update, I get the Ox80070424 error, what this means and how can I solve this problem?  Also, it won't let me use restore it say there is currently no restore points.  How can I fix this?

  original title: error Ox80070424

  I couldn't see this post before that I responded to your message duplicate.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/i-get-error-message-ox80070424-i-cant-do-restore/c11222e6-5b63-443C-af0e-12f7e5605b85

  You can't have the Norton and McAfee. XP Antivirus is malware. It is not a genuine anti-virus. It's a scam. You have a lot of work in front of you to remove the malicious software. I suggest that you scan your computer with Malwarebytes. Follow instructions on the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/how-to-get-rid-of-XP-antivirus-2012/7d5f03f6-c58c-4e14-821d-2fa5e3701ca2

• Error - Rome: Total War did not find DirectX 9, which is required for the game to run. Please reinstall DirectX.

  Original title: problems running Vista on Bootcamp DirectX.

  I have browsed the web for the last little while and cannot find any solution.

  I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.

  I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.

  I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.

  I do not know where to go from here, any help would be greatly appreciated

  Have you installed this installation?

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• On an iMac 10.8 Flash drive does not appear in the sidebar on the finder under Devices window, now appears on the desktop

  On an iMac 10.8

  USB stick does not appear in the sidebar on the finder under Devices window, now appears on the desktop

  This just started for no reason

  Finder > Preferences > sidebar.  Scroll down to devices.  External drives is checked?

  

• How to use windows search to search the contents of a bunch of files with random names / extensions?

  How to use windows search to search the contents of a bunch of files with random names / extensions? Plain txt files say 1,000 with random name of file extensions?

  You can always search within those, but you need to add extensions to the file system so that it knows to look inside these files.  You said that you have a lot, so it's perhaps tedious.  Here's How to search within several types of files.

  One thing you could try is rather to make a copy of this file, rename all the files to the same extension (even an extension false for example something.bill) and perform your search on this band.  Just an idea.

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• You received the C00D1199 error message using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  "You have received an error C00D1199 message while using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  The file audio im trying to open, a conference for a class I'm taking. Is there anyway that I can get the audio to play? program in windows media, itunes, quicktime player?

  Hello

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  Note: This link implies also on Windows vista.

• HP deskjet 1000 do not print using windows 7 How to the printer driver

  My hp deskjet 1000 printer do not print using windows 7 How to the printer driver

  It worked before on this PC?

  Full features drivers are here, select the bit version correct victory

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=4066377#n187

• So I installed rollercoaster tycoon 3. When I try to run the game I get a box with the header "" Microsoft Visuall C ++ Runtime library ""Runtime Error! " Program: End of the 3\rct3.exe__abnormal program C:\Program Tycoon3 tycoon

  can you tell me what causes exactly this and any idea on what I can do about it?
  the box indicates that the requirement for video is ATI Radeon 32 MB GeForce 2 or higher. I have the GeForce 8400 Gs

  Hi Merlot_1984

  Welcome to Microsoft Vista answers Forum!

  I suggest that you try to run the game as administrator and verify.

  Right-click on the game, and then click Run as administrator.

  If the problem persists, I suggest that you perform the clean boot, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart.

  Let me know if it worked.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• GFWL, I can log on to windows, but not in the game (dirt 2)

  GFWL, I can log on to windows, but not in the game (dirt 2).  It says 0 profiles found on the login screen right after you decide to use an existing LIVE account.  I'm under win xp, game dirt 2 and trying to connect to games for windows live.  my connection works for web browsing, etc.  grid works great multiplayer.  I went through and installed the gamers for windows_live program/client, I connected, created a new account, then restarted the pc.  I tried the two start the game by pressing 'home', which would direct me to registration in a nearly straight line on the door, and then when I hit the ' signine box, he would just sit there saying "Please wait" then that "loading" twirling which is graph would just turn and spin. and on the registration screen indicates "0" profiles found.   why it does not find my profile (recognize)?  Ive also tried going first games for windows live, then the game dirt 2 without result.  can someone please?      Thank you

  Oh, and I was able to download "Tinker" and am now play online!

  also in my games to the information page for windows network live while playing "handyman", it is said:
  I am not registered the internet ip address field and the link system address field says 'not active' and it also says I'm not connected on the field of upnp either.  None of this helps to explain?

  THANKS AGAIN FOR THE TIME SPENT TO HELP ME WITH THIS

  Hi Aceraceraced,

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is linked to the profile in the game of the dirt and would be better suited to the Windows Live games community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/games/en-us/support/pages/default.aspx

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.