Find anything when I open network connections in Control Panel.

Original title: computer problems

My computer (Windows XP) does not work, when I go into Control Panel, then
network connections, there is nothing there, and I don't know how to solve this problem cause
This is what reads your connection. Because I use a cable to connect to the computer
for the modem and now it do not even appear when I plug. Can anyone
Please help me everyone I know has no idea, and I can't afford a new computer

Hi raz1100,

In addition to suggestions from Andrew E, you can read the following article.

http://support.Microsoft.com/kb/953791

Tags: Windows

Similar Questions

  • My system tells me that my network connection is damaged. I ran malwarebytes & it came back negative. I went to shoot to the top of my network connections in Control Panel, and it came in white.

    NETWORK CONNECTIONS

    Can anyone help? My system tells me that my network connection is damaged. I ran malwarebytes & it came back negative. I went to shoot to the top of my network connections in Control Panel, and it came in white, nothing at all, no icons, nothing.        Sincerely, Merlin

    Can you do a system restore at the time where it did not work properly? http://www.officeforlawyers.com/tips/sysrestore.html

    -B-
    http://www.officeforlawyers.com | http://www.OneNote-tips.com
    Author: Guide to counsel for Microsoft Outlook

  • How can I get the sidebar at the time when I open my computer or control panel?

    I was doing a reformat on my computer and accidentally ticked the wrong box.  I can't get the sidebar that gives you options as to what you want to do.

    I think the following will return the "sidebar":

    1. Start button

    2. click on Control Panel

    3. click on Folder Options

    4. on the general tab, under section tasks, click "show common tasks in folders".

    5. click on OK

    Hope this helps

    Post back if necessary

    ___________________

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Since I updated to Firefox (which I love) I don't see anything when I open the download page. THiiS arrived on 4 PC

    Since I updated to Firefox, I see anything when I open the download page. This has happened on 4 PC. I have to go in my directory to open it.

    Hi Summerdaze,

    I'll try from Firefox Firefox to solve the issues in Safe Mode. If you do not have the issue so that all your modules, extensions, and themes are disabled, you can try adding them in one by one until you find the culprit. You should look at the guide to troubleshooting Extensions and themes and article troubleshooting issues with plugins like Flash or Java to solve common Firefox problems as well.

    Hope this helps!

  • Re: Can't do anything when I open Office 2007

    I can't do anything when I opened the Office at all, I'm free emplyed and do my books as soon as possible. It asks for the product key but the sticker at the bottom of the laptop has rubbed off. up until last month I was able to use word, exel etc. fine.

    any help would me thank you very much

    Hello

    When you bought your laptop you have been assigned to evaluate office m over 3 months, it was a trial version. Now, it should be bought if you want to use again. You can use Open Office:

    http://www.OpenOffice.org/

    OpenOffice is a suite of open source leader for word processing, spreadsheets, presentations, graphics, databases and more. It is available in many languages and works on all common computers.

  • Finder crashes when I open "All My Files.

    Finder crashes when I open "All my files", all other folders is fine. If I login with another user, no problem. Help, please

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, clear the search box, and then select

    DIAGNOSIS AND diagnostic USE information reports ▹ user

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

    I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

    original title: third party INF problems

    Hi Paul,.

    ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

    You can see the following article on how to set up a network.

    How to set up a small network with Windows XP Home Edition (PART 1)

  • error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

    error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

    Hi lisafuller,

    1 when was the last time it was working fine?

    2. did you of recent changes on the computer?

    3. What is the serial number and model of the printer?

    4. what happens when you try to access that Windows update and Control Panel?

    5. do you have security software installed on the computer?

     

    Method 1

    See the below Microsoft article and try the steps mentioned, check if it helps.

    Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

    http://support.Microsoft.com/kb/947236

    Method 2

    If the previous step fails, then check out the link below and run them the troubleshooter, check if it helps.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Due to Windows update run the Windows Update troubleshooting, check if it helps.

    Open the Windows Update troubleshooting tool

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    Also check if you can access control panel from safe mode.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Restart the computer to return to normal mode

  • I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

    I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

    Hi kotipelto.

    To better understand the issue, we need the following information:

    Are what environment you referring?  What did you delete?

    Let us know if you can start the computer in safe mode and works as expected.

    Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    If you can start the computer in safe mode, perform the system restore.

    System Restore: System Restore to put the computer's system files to an earlier point in time.

    Search the steps mentioned in the link below:
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

     

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    Windows Media Player help

    I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

    Hi Rains27,
     
    1. were you able to play the same DVD sooner?
    2. must arrive with a particular DVD or all of them?
    3. do you have a DVD decoder installed on your computer?
    4. you use starter edition of windows 7?
    5. What is the resolution on your computer?
    6. have you installed a codec on your computer?
    If you have installed a codec on your computer the I suggest you to uninstall the codec.
     
    Method 1:
    Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
     
    Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
     
    Troubleshooting, click View all, and then click Windows Media Player DVD.
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
     
    Method 2:


    Method 3:

    Try to reduce the hardware acceleration again and check if it makes a difference.
     
    a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
    b. click on advanced settings, troubleshoot tab and then click on change settings.
    c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
    d. click OK and then click Restart now.

    For more information, see this link: thanks and regards:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I did recently have a spybot search and destroy and now I get this message that Rundll 32 exe if this file is not in this file I can't open some programs like control panel

    Original title: cannot find rundll 32 exe System I get this message when trying to open Control Panel please help

    I did recently have a spybot search and destroy and now I get this message that Rundll 32 exe if this file is not in this file I can't open some programs like control panel

    Hi ElaineHinder,

    You can follow the below mentioned article Microsoft Knowledge Base and check if the problem persists.

    Cannot find the Rundll32.exe file when you open Control Panel

    http://support.Microsoft.com/kb/812340

    Let us know if that helps.

  • touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?

    touchpad doesn't work on my laptop.   I can't find that everything about the touch pad in Control Panel.  can you help me please?

    Hello

    It's material is not a Windows problems.

    / Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
    is a toggle the TouchPad that it is enabled.

    Check with support of the manufacturer system, documentation online or forums that there is probably
    Shortcut keys that enable and disable the touchpad functions.

    Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
    entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

    ==========================================

    If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
    only once if the above did not work)

    Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
    Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
    on the TouchPad and UNINSTALL.

    Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

    This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

    The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
    http://support.Microsoft.com/kb/310575

    Then go to the system manufacturer's website and get the latest touchpad drivers.

    Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

    ==========================================

    This utility also allows to control the TouchPad:

    TouchFreeze
    http://code.Google.com/p/TouchFreeze/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • I can't find tab share in the network connection properties

    Hello

    I'm trying to share the internet connection by LAN from the main computer cable. But unfortunately I could not find the option of sharing network sharing Center. Kindly help me with your suggestions on this.

    Hello Monica,.

    I would like to know some information about the problem so that we can help you better.

    1. What is the brand and model of your computer?
    2. is the computer connected to a network domain?

    Thank you for details on the issue.

    I also know that the inconvenience that you are experiencing due to problem of network share. I will definitely help you.

    This problem can occur because of incorrect network settings.

    Please refer to the suggestions of Stephanie Podder replied on 10 July 2013 and check if that helps.
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/sharing-tab-for-local-area-connection-missing/44b26daa-44a2-42d5-9b63-42f462b6e3fd

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • "The dependency service or group could not start" - cannot open network connections to connect to the internet.

    Hello

    Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

    However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

    Any help would be greatly appeciated :)

    Thanks in advance

    Sam

    Medion M96350,

    Intel Core 2 Duo,

    T520 @1.5 - Ghz,

    Vista Home Premium

    Hello

    You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • ' C:\WINDOWS\SYSTEM32\RUNDLL32. EXE'getting this message when trying to open files and the control panel.

    This is the message I get when trying to open a file or trying to access the control panel

    Hi NANCYPERRY,

    See the article after some troubleshooting:

    http://support.Microsoft.com/kb/812340

    I hope this helps!

Maybe you are looking for