Find blackBerry Smartphones and calling Contacts is ridiculous - not to try while you are driving.

I have 2800 contacts in my new storm.  To call it by its name, I should be able to go to my phone, dial pad and start typing the name of family - say 72782 for PASTA and one by one the phone to refine my choices until I can see and that you can click on the right one.  But no, the storm requires a user go to Contacts and then click on a line of tiny human finger cannot possible just touch the first time and then start letters in horizontal mode, because God forbid, you should try the method of double letters vertically.  Forget it!  In many other aspects, it is a good phone and the brightness of the screen and the size is wonderful for internet and electronic mail.  But without an easy way to access my contacts, this phone will come back tomorrow.  BlackBerry, wake up!

A dial contacts hands is easy.  Theres a shortcut.

If you press the Send button storm Green will go to dial (as the installer of the factory) pad.

If you press and hold the Green send button, storm will got to the contact page.  Then take your finger and the sweep of the screen from the bottom to the top and the keyboard will go up.  Then just type the name you want and contact will go up.

Actually using this technique is very nice and can be done with strikes a minimum!

Tags: BlackBerry Smartphones

Similar Questions

  • Lack of email blackBerry smartphones and call log

    I woke up this morning and realized all my emails and calls were missing. After getting over my fustration, I learned that it is because I ran out of memory, so the phone automatically deletes logs.

    So I have two questions:

    1: who is the cause of my missing emails and logs?

    2: buy a micro sd card would help? Would the logs stored on the sd card or sd card help just for storage media?

    Thank you

    S

    The microSD card is only used to store multimedia files

  • Desktop of blackBerry Smartphones and software Contacts Calendar?

    Hi all

    I just changed to a Treo 680 for the Blackberry Bold.

    First situation: Palm had office who had a calendar, contacts, media, etc all on the desktop that was attached to the phone.  Just put the phone in the dirty and hot-sync to update the computer or the phone...

    Now, the Blackberry Desktop doesn't have an option of calendar or contacts.  Obviously, the phone itself has a calendar and contacts.

    Question: Is there a download I can buy for a calendar / contacts application?

    That's all I need essentially.  I don't have Outlook, but I tried the evaluation version of Outlook 2007 and had some problems of setting up e-mail account (which I don't need; I have AOL e-mail on the "BOLD" and that works very well).

    Just need a calendar and contacts that I have on my computer that will link directly to "BOLD" when I placed the "BOLD" in the cradle?

    Any suggestions?

    Appreciate all help.

    Thank you.

    No, you don't need to buy anything. If you cannot synchronize the 2 devices with the Desktop Manager, you have another way to do it.

    Export all contacts, memos, etc to palm desktop for Outlook. and after that syncs with the Blackberry.

    Believe me is more simple synchronization Blackberry that synchronize the Palm.

  • Phone smart BlackBerry Smartphones and the memory card appears not

    I have a Storm 9530. When I synchronize with the Fund Manager for this. When I try to upload music, it says please insert a memory card and you reconnect to your computer. I have a card in there and have tried 3 different ones. It also displays all the icons on my desktop Mac blackberry. Card appear in the Options of memory. Auto enable mass storage Mode when connected is set to NO, is this true?  Thank you

    Hi dbond,.

    Try setting Auto enable Mass Storage Yes and defining the MTP (Media Transfer) Protocol to disabled. This article should provide more information. http://bbry.lv/rqhkNV

    I hope this helps.

  • Clock of blackBerry Smartphones and start date

    the clock on the grayshade is on my home screen at the top of the phone. I have a way to change it to another place or to disappear or take the shade of gray because I want my wallpaper to show fully. Thanks for any help

    So what clock symbol you show? The one above is the alarm.

    Yes, you need a new theme, or you will need to design your own. I have seen one that has NOTHING on the home screen. Nada. I don't remember the name of it, I hated it. But one of the developers of the aura, you'll find it. Perhaps something named as 'White' or 'no '.

    You are welcome!

  • BlackBerry Smartphones Eception Exception: (all applications) does not. the process is completed.

    Hello

    I have a lot of problems with my bb, but normally correct them easily, by battery traction or software update, this time I can't do.

    Some info on my phone if this can help.

    Company: o2

    Bold 9700 5.0 bundle 1022 (according to BB Desktop)

    59402245 bytes free

    Battery pull didn't work

    Main applications I use are BBM Whatsapp Google Maps etc.

    Basically, I'm trying to open an application and my phone freezes, I wait and get the untrapped exception error message. This happens with ALL applications, including surveys BBM, record Messages, clock, Facebook, phone. I tried a battery pull, he starts upp and the error messages come through quite the same problem is still there. I tried connecting to the office to try an update of the operating system, but I can't connect because it connects forever. so I can't do anything at all with my phone. It all started when whatsapp froze on me followed by a few other apps do the same thing, so I tried a battery pull.

    Any help would be greatly appreciated! Thank you!

    Hi aamirahmad

    I suggest you make a backup of your BlackBerry smartphone and then reload the software as described in the article below:

    KB11320 - how to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...

    Thank you

  • I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

    I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

    Hi yjain51,

    I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

    When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

    Use the ID Touch on iPhone and iPad - Apple Support

    Thank you for using communities Support from Apple. See you soon!

  • Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?

    Where can I find "Windows Fax and Scan" if it does not appear under my "all programs"?

    WIndows Fax and Scan is only supplied with Vista business, full and firm.

    http://Windows.Microsoft.com/en-us/Windows-Vista/send-a-fax

  • BlackBerry Smartphones emails appearing in Outlook, but not on Blackberry

    I got a BB curve for about a year, and I have two e-mail accounts separated, put in place in this regard.  A week ago, I stopped getting emails on my BB in my main email account.  However, I always get emails on my BB in my secondary account.  My email always appear on my Outlook account.   I have not changed anything on my PC.  After trying different solutions, I did the following with no luck:

    * Make sure my account Outlook says to keep the emails on the server.

    * Taking the battery of my BB and put it in

    * Canceled the main e-mail account and set it back up.  Twice.

    * A tried to "reconcile" my emails

    Someone at - it any other ideas?   Help!  I miss and need my emails on my BB!

    I think I solved my problem.   After that BB exhausted all attempts to solve my problem, I thought about one thing.  When I was talking to them, the guy asked me how many mails in my Inbox.   I had a lot and he told me it would take 1000 and then after that, she would 'Butcher' upward.

    While I did that a lot in my Outlook Inbox, I had a number in my Deleted Mailbox, and many of them (probably more than 100 of them) were emails with photo attachments.   I ended up delete everything in my Inbox, my deleted box and my inbox sent.  Then for my BB, I took the battery, left on a ten seconds and put back.   Voila!   I'm back in business!  I don't know if the removal is what did the trick, but I just wanted to inform people to try if you are having this same problem.

  • I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are therefore currently operating on 9.2.1. It just says: update could not be completed, and that was in the 11-15. I pay for extra storage if this isn't the issue...

    I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are running 9.2.1. I can't get either do an iCloud backup, he repeats to me just last backup could not be completed. The last successful backup has been in November 2015. I pay for most large storage storage account is not the problem but, the fact I pay for cela and cannot use it is very frustrating = / I really need to get my backup iPhone I have a few important pictures there. I have read other posts, but nothing useful there. Is this a problem in one of the updates at this time or some other interferente app? Or? Thank you...

    Welcome to the Apple community.

    Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

    You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > Storage manage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

    Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

    Then, try to connect the device to a new location (different WiFi network)

    If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > backup), reboot the device and then turn on BackUp on new.

    If this help not disable backup again, remove your existing back to the top of settings > iCloud > storage > Storage manage > backup > this device (scroll down) > delete backup, restart the device and then turn on BackUp.

    If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

    The next thing to try would be to restore your network settings. (Settings > general > reset > reset network settings)

    Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

    If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do with settings > iCloud > storage > storage management > backup > appliance > Back Up Options.

    If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

    Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

    More on v iCloud iTunes backup

  • Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

    Original title: widows installation problem

    I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

    The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

    This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

    Hello

    1. have you done any change in software on the computer lately?
    2. are you able to install other applications and programs successfully?

    Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
    a. refer to the article below for the procedure safe mode in Windows XP
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    b. you need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I tried to run the IE8 downloaded from Microsoft and I got this message: "the version of IE you have installed does not match the update you are trying to install." error no. KB2618444

    I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:

    "The version of IE you have installed does not match the update you are trying to install." error no. KB2618444

    I'd appreciate any help that I couldn't solve this problem!

    Thank you!

    E-mail address is removed from the privacy *.

    Original title: error KB2618444setup

    I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.

    You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
    I'm going to guess you really want that for IE8.
    That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe

  • Encarta Dictionary works do not mistake: this service could not be searched because you are not connected to the Internet. Connect, and then try again

    Original title: Encarta Dictionary (not searched)

    Encarta dictionary does not. I get the message "this service could not be searched because you are not connected to the Internet.  Connect, and then try again. "However, I am connected to the Internet.

    Hello

    1. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps mentioned below and check if it helps.

    Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

    My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

    Hello

    Did you change your computer before this problem?

    You can follow the suggestions and check out them.

    Method 1

    You can follow the procedure in the article.

    How to resolve problems connecting to Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/818018

    Method 2

    You can reset the Windows Update components.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 3

    You can download and run the system update readiness tool.

    Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

    Method 4

    Step 1:

    Place the computer in a clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After a troubleshooting follow step 7: reset the computer to start as usual

    Step 2:

    You can manually download and install updates from Microsoft Download Center.

    Microsoft Download Center

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 5

    You can disable temporary of your security software.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

    See also:

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • Hello, I'm willing to give up my bundle of photography (Photoshop + Lightroom) project. I tried to do if however the plan itself does not appear here, be as creative cloud storage and on that there do not cancel option when you manage the plan. Its defini


    Hello, I'm willing to give up my bundle of photography (Photoshop + Lightroom) project. I tried to do if however the plan itself does not appear here, be as creative cloud storage and on that there do not cancel option when you manage the plan. Its really here because I'm still charged monthly for it. Any cancellation help please?

    Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

    -or directly at this link https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

Maybe you are looking for