Find on Notebook S/N, with the help of its original details S/Ns
My HP laptop was stolen 2 days ago and the main problem is that I even could not report it to the police since I don't have all the documents proving his membership in me: neither serial number nor the guarantee certificate.
But recently, I had both replaced in details: drive HARD and battery. In other words, I have the "old" here and know their S/N.
In this regard, I would like to ask whether it is possible to find on my laptop S/N, if I have a S/N of its details initially set up?
In addition, I discovered S/N of my new HARD drive, which is now operational in my stolen in New Brunswick. Of course I reported it to the police, but I think that the research would be more effective if I knew that the S/N of NB itself.
I really hope that you can help me and I am looking forward to your reply!
Thank you!
According to the message that you posted recently I would recommend you immediately Contact HP support by phone to get help without delay to get all the details you're looking for
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
I work on behalf of HP
Tags: Notebooks
Similar Questions
-
I published my site to Business Catalyst and purchased and installation by area, but the site can be seen only with the help of a search engine. The site is seen when I type the url address, but can not find with search engines.
Hello
I suggest you sign upward to Google Webmaster tools (free) and check your site (directions are in the webmaster tools) and
also consider joining Google analytic (also free). Analytical will allow you to 'see' who is visiting your site and how they experience through research, order the seizure of the URL, or through the links, etc. Also from where they come, how much per day, etc. Lots of good information.
In addition, through this document by google
Check the performance of your site - webmaster help search
Let me know if you have any question.
-
With the help of Club running on the Nike watch +.
Hello
This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?
As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?
Hello
You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:
- Contact Nike (support is available by phone and via social media):
- Nike + running Club to support:
More information:
https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8
-
How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4
With the help of Mac 'Pages '.
A typing mistake?
If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window
These are detailed in the help topics of pictures - a good place to look for help on the Photos
View and add information about the photos
You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.
View and add information about the photos
To view or change information for the photos, you select one or more photos, and then open the information window.
- Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
- Add or change information: Change the following.
- Title: Enter a name in the title field.
- Description: In the Description field, type a caption.
- Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
- Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
- Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
- Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.
Show titles, other metadata and badges
Change the date and time of photo
You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.
- Select the photos you want to edit.
- Choose Image > adjust Date and time.
- Enter the date and time you want in the modified field.
- Click a time zone on the map, if necessary.
- Click on adjust.
-
With the help of modulated signal pulse width (square wave) to control when a signal is enabled or disable
Hello all
I am using a modulated signal to labview created pulse width (square wave) to control when a signal is activated or not.
Here is my logic and a concrete example:
(1) the wave source signal is continuous
(2) use a PWM (square wave) created in labview to control when the signal is enabled or disabled
(3) if the PWM (amplitude) signal is superior to 0 play signal PWM is not greater than 0 do not play signal.I use actually this to the sequence step / pulse several distinct magnetic coils using my audio card (which has several channels of audio output), I have a signal in labview played constantly. As to compare it to the PWM (square wave) which controls whether or not the signal is played on each separate channel. That way I can control which coil is on and offshore and in what order they are activated.
I couldn't find an edge detection for a square wave created in labview, so I tried the limits, but it doesn't seem to work unless I change the phase manually and it only goes 1-1. I'm just trying to compare the PWM (edges of the square wave) already created by labview / play a signal if the pulse is greater than 0 and it shuts off the signal, if she is less than 0.
Should I do this another way
TIA
A waveform contains an array of values. You must check every value and respond accordingly:
-
With the help of VISA Write in parallel loops (multithreading)
Hello
I got the idea to set up four parallel loops on a quad core with four EHR via serial port independently. I use the PXI-8430/8 and I was told that an independent operation of ports is possible.
What I did was simply to put in place four parallel for loops consisting only of a single entry VISA. With the help of the Tools > profile > find parallelizable loops, they gave me the following warning
This loop For may or may not be safe to parallelize. Warning (s):
-A node in the loop For can have side effects.This means, that the pilot VISA screws are not suitable for multithreading? With the help of LV2010
Thanks for your comments!
See you soon
Oli
Here's some good reading on paralleled for loops.
Regarding the caveat, it's just that - a warning. If you write commands on a device and orders must be received in the order then you cannot parallelize the loop. If the order does not matter then go ahead. But in the case of VISA wrote that a parallelized loop going not buy you anything. They are intended for operations of calculation intnesive.
Just stick to four loops.
-
With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix? 3 updates failed to install: KB2779562, KB2705219 and KB2722913. Constantly configures updates during startup and shutdown. Takes a long time for the two workers. Can anyone give advice?
To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.Start an command prompt (Start - All Programs - Accessories - command prompt) and typenet helpmsg 2and it will sayThe system cannot find the specified file.Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log. -
TODAY, I CHANGED MY SETTINGS ON THE BACKUP OF THE PAGE WITH THE HELP OF WINDOWS BACK UP TO SEVERAL TIMES AND NOW WHEN I TRY TO BACK UP MY COMPUTER AGAIN, HE GUARD DEFAULT.
I HAVE WINDOWS VISTA PREMIUM 64 BIT.
I WOULD APPRECIATE YOUR RESPONSEHello
1. do you receive any error messages?
2. what exactly happens when you try to backup data?
3 have. what settings you changed?Please answer these questions. This will help us assist you better.
Try to perform the clean boot.
Refer; http://support.Microsoft.com/kb/929135
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Is it posible to track people play that your app is saved with the help of bbm surveys.
Hello
Save with bbm on launch my application. There are statistics that I can look who will give me a sort of return to how many people my app was saved with the help of bbm surveys... find out how many people have my app diaplayed in the Apps of their bbm profile section...
Thank you
No, we don't currently offer reports with this information.
-
Hello
I followed folders in my USB key:Boot
EFI
Sources
Support,and the following files:
Setup
Bootmgr.EFI
BootmgrHow can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
I would be very grateful if someone could help me out here.Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.
Concerning
MAKIf you have the upgrade key, go here
http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media
You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that. Will allow you to have an iso bootable.
Make a picture of the control panel system / Windows 7 file recovery / system Image. I certainly wouldn't put it on dvd. It will be too. Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.
-
With the help of Acrobat with MS Access VBA
With the help of Acrobat 9.5. I'm trying to analyze a problem, so I have this test code:
CODE
Void testObjects()
Dim i As Boolean
Dim objapp As acrobat. AcroApp
Set objapp = New acrobat. AcroApp
objApp. Show
I have = objapp. CloseAllDocs
Debug.Print I have
I have = objapp. Output
Debug.Print I have
Set objapp = Nothing
End SubAfter Objapp.closealldocs I I = true (successful) but after I get i = objapp.exit I = false (no), and of course Acrobat is still active. How can I get Acrobat to close? It is a bit of test code. In the real application Task Manager indicates acrobat using memory more and more as the application moves through the records.
I suspect I'm missing something obvious here, but what? My experience with Acrobat automation and access is limited, so be gentle with me!
If this is the wrong forum, please tell me where I should go.
I thought people might be interested to know that I found a work around for the problem of memory leak. I inserted a break every so many documents and that seems to be enough to let the Acrobat to free the memory.
On the development of PC a break of 10 seconds every 50 records (or probably more) are sufficient enough. but I'll have to do some settings on the computer target to find the optimal number. This means that the process is extended, but it is once a year of operation, so I don't think that will be a problem. I'm estimating that the final time will be approximately 15 minutes.
Of course, I thought of the solution until after that I had worked to generate Word documents instead, but it now means that we can offer the form in PDF or Word format.
Thank you all for all the help and suggestions.
-
I just got the Samsung Galaxy S4 and I'm looking to find an e-mail with the help of ActiveSync client; However, it is precarious with our administrators having the ability to remote wipe our personal devices. In short, with are all the other available similar policies and remote wipe sandboxed for this application? or apply to the device as a whole? There may be a white paper available to read more about this? Is there a free trial of this application to test the feature?
Thank you
Neil
Hello
The app is designed to comply with Android Device Policy Manager, so he's going to wipe the device when receiving the order of deletion from the server.
Management of workspace on personal devices is supported in VMware Horizon Mobile products:
http://www.VMware.com/products/desktop_virtualization/mobile/overview.html
To the point, we don't have a free trial version.
-
Upgrade to LR5.7 and PS Elements 13. With the help of a Solid State Drive, which is more complete! Can I remove older versions of these programs without affecting the functionality of the new programs?
Yes, there is no need to keep older versions of the software on the SSD (or your computer).
In addition, you mentioned but if the photos are on the SSD, you must move them off the SSD for a typical hard drive, by following these instructions: Adobe Lightroom - find folders and files moved or missing
-
With the help of the mouse unordered list
An issue of the past... I thought that I treat it a few years back, but can't find it here... I have a non ordered list of values (in a list in an accordion area!) and wish to have help mouseover for the items in the list...
With the help of APEX 4.0 on 11g Enterprise...
IE 7 (yes I know, don't get started me on that...)
Anyone can shed light on how to do it again?
Thank you
Tony Miller
Dallas, TXHello
This could help.
http://dbswh.webhop.NET/dbswh/f?p=blog:read:0:article:2571800346711217Kind regards
Jari
-----
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
With the help of the Shot or Index on Panasonic AF100 prelude or first CS6 brand
I want to shoot images with my AF100 and using the Index or mark for on the device - and then somehow see these markings when I arrived to import or edit pictures in prelude or Prime Minister. I want to be able to score my takes good. I also want to make marks on the clip, while he drives. The manual of the camera says he has the function, but I can't find where in CS6, this info is revealed. Someone knows how to do this?
My application practicle turns speakers from the back of the room--this with the help of note when they flip to the next PowerPoint slide that is out of the frame...
Thank you!
Mike
Mike Berlin wrote:
I want to shoot images with my AF100 and using the Index or mark for on the device - and then somehow see these markings when I arrived to import or edit pictures in prelude or Prime Minister. I want to be able to score my takes good. I also want to make marks on the clip, while he drives. The manual of the camera says he has the function, but I can't find where in CS6, this info is revealed. Someone knows how to do this?
I can't find any information that Index or Shot brand works with non-linear editing software. This is probably a unique in-camera feature. Sorry, I don't think that this is supported.
Maybe you are looking for
-
Satellite A200 keeps power off (continuous)
Hi again, I don't understand why the previous thread was suddenly blocked :|http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=44934&TSTART=0 To answer last post by PauPau of the thread: (1) Hi PauPau, 1st of all thank you for you
-
Error message: STOP: 0x0000007E (0xc0000005, 0xB42E09AC, 0xBA4E39B4, 0xBA4E36B0)
-
BlackBerry Smartphones SMS text message won't clear
I received a text message that will not clear. It acts like it is deleted, but it's still there. any suggestions? I'm a bit new to blackberry, be nice.
-
Sending files to illustrator from ipad
I did drawings with the "draw" app on my ipad and then goes on 'Send the Illustrator', so I can still edit on my computer. But then they disappear into the ether and I can never find them on illustrator. Any thoughts? Thank you!
-
Project and project currency currency
HelloWhat is the difference between the currency and functional currency of the project? Why their two separate entities for her? My Oracle support communityConcerningVivek