find the parenthesis

Similar Questions

• Error to find the frequency of signal to tachometer

  I use the vi "Extract only your Information" to find the speed of a motor.  The entrance is a monarch Laser Tach AC output.  Tach reading is very regular and the AC output is 5 volts peak.  There are a few negative pics, but these are at the speed of the engine.  My output frequency, who should read the changes back from 1800 1800 at a frequency near 5400, but not exactly 5400 (5321, etc.).  Y does it have no signal conditioning that I'm missing before signal to the vi "extract", for example, the window it and then use the frequency domain cutting-edge research?

  Thanks in advance,

  Ron

  Matt,

  Just to let you know that I put a bandpass filter in my vi.  I took the input of the speed estimated of the user and put in parentheses of the bandpass filter to be 25% below 25% above the target and the input of speed tachometer works very well!

  Ron

• Ignore the parenthesis on a case where they wrap a string

  Hello

  This is my first question, I hope I'm doing this right, then I write one. CSV file in a table, and then create a view of this table, taking only some fields in order to write them in another CSV file.

  Here's my problem with a field of view:

  

  I want to get rid of the parenthesis, I could not find any definitive method on the net, so I tried to cut the first and the last "()" in the chain using case:

  

  I got the following error:

  

  I tried the same logic using case this time test the string length (because 9 would be the longer):

  SELECT THE CHECK BOX

  Length WHEN (a.base_amt) = 9 THEN (select distinct substr (a.base_amt, 2, length (a.base_amt)-1) of CRD_AMT one)

  ON THE OTHER

  (select distinct a.base_amt in crd_amt one)

  END

  OF CRD_AMT one

  I received the same error.

  Now, I know that this is not the best way for all to achieve what I need, I have, I'm sure that there is possibility to ignore the parenthesis, but I couldn't find something that works...

  I hope that you, the experts may have a solution.

  Thank you!!

  Hello

  1623052 wrote:

  Hello

  This is my first question, I hope I'm doing this right, then I write one. CSV file in a table, and then create a view of this table, taking only some fields in order to write them in another CSV file.

  Here's my problem with a field of view:

  

  Welcome to the forum!

  It's much better to post CREATE TABLE and INSERT statements, so that other people can recreate the problem and test their ideas.

  Check out the Forum FAQ: Re: 2. How can I ask a question on the forums?

  to get tips on how to get the most out of this forum.

  I want to get rid of this bracket,

  The TRANSLATE function provides a simple way to remove all the brackets (or characters you want):

  SELECT TRANSLATE (base_amount

  , 'x()'

  , 'x'

  ) AS new_base_amount

  OF crd_amt;

  The 3rd argument to TRANSLATE is one of the characters that you don't want to delete.  It doesn't matter whether or not it actually occurs in one of the strings.

  The 2nd argument on TRANSLATE begins with the same character and continues with all the characters that you want to delete.

  I could not find any definitive method on the net, so I tried to cut the first and the last "()" in the chain using case:

  

  I got the following error:

  

  I tried the same logic using case this time test the string length (because 9 would be the longer):

  SELECT THE CHECK BOX

  Length WHEN (a.base_amt) = 9 THEN (select distinct substr (a.base_amt, 2, length (a.base_amt)-1) of CRD_AMT one)

  ON THE OTHER

  (select distinct a.base_amt in crd_amt one)

  END

  OF CRD_AMT one

  I received the same error.

  Now, I know that this is not the best way for all to achieve what I need, I have, I'm sure that there is possibility to ignore the parenthesis, but I couldn't find something that works...

  I hope that you, the experts may have a solution.

  Thank you!!

  The problem here is that you don't need so many subqueries; in fact, you do not need.  If you want to use the above approach, a good way to do it is:

  SELECT THE CHECK BOX

  WHEN base_amt LIKE "(%)". »

  THEN SUBSTR (base_amt

  2

  , LENGTH (base_amt) - 2

  )

  Of OTHER basd_amt

  END AS new_base_amt

  OF crd_amt;

  However, which removes only the parentheses at the beginning and end of the string, and only when they occur in pairs.  You said you wanted to remove all the brackets.

• find the space before the %-sign & number

  Hey, simple task, but since I'm ugly (yet) with grep, I'll ask here.

  Example of text (part of a paragraph):

  Suolapitoisuus 3%.

  I want to keep the title "suolapitoisuus", number and %-sign on the same line. So I should find the characters "3%" and mark unbreakable character style in the style of paragraphs grep. "

  What would be the string grep for this?

  Just to extend

  [\l\u]+\s\d+,?\d*\s\%

  Snack or a parenthesis:

  [\l\u]+\)?\s\d+,?\d*\s\%

• How to find the key

  Is there a quick way to find the key of a song or instrumental that has been imported to the logic?

  No, you need a little music for this. I guess you could find it difficult to play with a keyboard and hear/guess the agreements/key?

  Here would be my suggestion for a workaround - if it is an entire song, as you indicate in your question:

  -To get agreements on a Web site

  -See if you can find the original version of keys (that would be easy, right?)

  - Then play these chords along your song imported. If they sound not right, transpose your up and down by steps MIDI track until it sounds right. -> Get your agreements and the key.

  If your song doesn't have agreements to seek, find parts of the song where you lift clear of bass notes (not too much battery), EQ everything, taking Tuner in pop in the track and see if you can pick up the dominant notes. That should lead you to your key of song.

• Cannot find the library of photos on iMovie sidebar

  I work in iMovie and I can't find the photo library on my sidebar iMovie. How to retrieve

  In the preferences of Photos make sure your library is the library system. It must be indicated as grey. Then open photos before opening iMovie and it should appear.

• How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.

  How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.  If it has been deleted to "improve" the Photo experience?

  Lot, what exactly will change?

  Titles, Descriptions and capture date - Yes.

  Select the images you want to change the title or the description and to set-up the info (command-i) pane.  Enter the title or the description in the appropriate field and he will be assigned to all selected pictures.

  

  If you want to batch, change the title with sequential use attached many Applescripts provided by users in the Photos for Mac user tips section.

  Batch change/correction of dates is provided by the Image ➙ setting Date and time menu option:

  

  

• Cannot find the volume of the speaker on the Iphone 6 IOS 10

  I have updated to IOS 10 on my Iphone 6. I can't find the volume control Chair that used to be in the control center. I have two control centres and in none.

  Hello

  In the Panel, there are 2 screens, drag to the right for the music and the left for the parameters. It will be the slider at the bottom of the music.

  Thanks again

  Will be

• I haven't been able to find the map "recently removed" photos. Who can help me?

  I cann't find the item 'lately or recently removed' (in Dutch: both doors) in the Foto card / Albums. Who can help me?

  Go to the albums page, it's there.

• Hello help, Mac can't find the printer

  Hi all

  'BonjourPSsetup.exe not supported under OS X' I am puzzled.

  To create a roaming network, I added as an express to my Time Capsule airport and doing so changed the name of the network. (Original name was a little too identifiable) now MacBook WiFi can not find the printer, it allows.  (cause he's probably looking for the former name of network). Went to Apple's support for assistance. Found several posts with instructions. All direct me to download the Printer Wizard Hello.  When I do, I get the above error.

  Also, went to:

  Applications - printers and Scanners - add

  List of shows:

  Name: Series HP Photosmart C4385

  Type: USB

  Cannot change the type of USB to Hello

  SYSTEM-

  El Capitan 10.11.6

  MacBookPro, MacMini, iPad.

  Express connected to the Airport via CAT 6.

  MacMini use USB for printer

  HP Photosmart C4385

  Thanks in advance,

  Mike

  Resolved to my situation. Find the HP original installation disk. Uninstalled and reloaded. Fact

• I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked.  I changed my Yahoo email but can't find the field to change on my devices.  It is simply not there, what is happening?

  I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked.  I changed my password to Yahoo mail but can't find the field to change the password on my devices.  It is simply not there, what is happening?

  For some reason any change automatically if change you it online. Today, I changed my password through my office and I went to change the mail and she had already changed.

  You can try to delete your account your unit off and add it again.

• How to find the list of individual songs in iTunes?

  I used to be able to find the complete list of songs in my iTunes. Now, all I see is a list of playlists on the left side. I can't find anyway to get it to list all of my songs. Only when I put in something again I see the song list in the item, such as an audio book, for example.

  I want to check my list to see exactly what I have, but can't see any song, unless it is in a playlist. How can I see a list of all my songs?

  In the sidebar under 'Library', a secondary to edit click the list that you see there. Add songs.

  

• can not find the album on ipod

  I have an ipod nano and ripped an album from a CD.  I can't find the album or one of the songs on the ipod, but they appear when I connect it to a PC or a Tablet

  but they appear when I connect it to a PC or a Tablet

  You are looking at the content of the iPodas shown in iTunes on the computer When you select iPod in the iTunes window?  Or do you mean that the album appears in your library iTunes music, but not on your iPod?

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• Upgrade: numbers can not find the field to change!

  Sorry if I am dense here, I'm sure that there is an obvious answer, anyone here know, but I can't imagine it or find info already online.

  I just upgraded from Cougar to El Capitan.  Then, I upgraded a previous numbers spreadsheet to edit it in El Capitan.  After the installation, I printed it and a field I can't see anywhere on the new version, or find any path, spell on the print-out (immediately above the table and text on 2 lines).

  I think that this field used to be editable in Mountain Lion in a sidebar on the left, but I don't remember the name of it so I can't find how to access in an upgraded version.  I don't know, however, is not the name of the table or sheet name because I can see where to edit those.

  Can someone please help me find the way to access this hidden field so that I can change it?

  In advance, thank you very much for sharing your skills and your ideas.

  Jackie

  I just answered my own question!   After hours of searching in the Inspector, I had an idea more now after I had posted this question here, of course.

  In the case where it is useful to all of you who don't know already (jumped several major improvements to the operating system, so I'm exceptionally behind with new features/functions): it can be seen and edited in the print dialog box.  The 'invisible' text appears and zoom in for a better view, you can change it.

  Sorry to have bothered you and thank you for your time.

  Jackie