Finder and records...

Similar Questions

• I just got EZ Grabber and cannot find my records so I can burn it to a DVD.

  I just got EZ GRABBER, I got to cick vynil, but can not find where my film of my VHS tape was recorded on my computer so I can burn to dvd.
  original title: EZ GRABBER

  What you name the file as it was before?
  Use the search and the search for this name.
  Or use find and search all created files the day you did capture

  Or, if you are unsure, I would say that you repeat the process and the mae a note of the options to learn where to save, then stops. Look at this place for your captured file.

• I find these records long name with 20 or more charactors and inside them is nothing else than "mrt.exe" file. I find them in random places.

  Original title: MRT. EXE files are all over my computer.

  I find these records long name with 20 or more charactors and inside them is nothing else than "mrt.exe" file. I find them in random places on my drive c: and many of them on my external G drive in the root. A new appears approximately every three months.

  I know the mrt.exe is supposed to have something to do with the malicious software removal tool, so I don't want to just delete them and have a problem.

  Allen

  Hello

  Are you prevents the tool from running?

  See Q21 at the end of this article

  The Microsoft Windows malicious software removal tool helps remove specific and prevalent malicious
  software for computers running Windows 7, Windows Vista, Windows Server 2003, Windows
  Server 2008, or Windows XP
  http://support.Microsoft.com/kb/890830

  What you do not know the Windows Malicious Software Removal Tool
  http://blogs.Computerworld.com/what_you_dont_know_about_the_windows_malicious_software_removal_tool

  What is Windows Malicious Software Removal Tool (mrt.exe) and how to use it
  http://www.vista4beginners.com/Windows-malicious-software-removal-tool?page=1

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to find the audio and recording mixers

  Cannot find Audio Mixers and recording in Windows 7 as I had XP

  My Medion computer purchased recently does not appear to have full audio mixer for volumes or a similar mixer to record levels as I have already in Win XP.

  Is it possible to reproduce pages of mixer teas? I would be grateful for any help on this problem.

  TIA Mike

  Cool Edit 2000 (compatibility issue)

  Hello

  The mixer similar to that of Windows XP volume has been removed in Windows 7.

  Windows 7 has its own volume mixer. Check this link for more information:

  Adjust the sound level on your computer:
  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  Cool edit 2000 is not compatible with Windows 7. Cool Edit was taken over by Adobe, a few years ago and renamed Adobe Audition. The manufacturer
  offers a paid upgrade to the software.

  Check this link for more information:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=cool%20Edit%20PRO&v=Adobe&UID=2&pf=0&PI=
  6 & s = Cool % 20Edit % 202000 & os 32-bit =

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I find and access a record of Mail in Mail El Capitan?

  In Mail on 10.8.5 - when I need to send an e-mail message, that I was able to search a folder, search for a message in this folder, select the message in the search results and then see and click on the name of the folder has resided in - take me directly to the folder nested within the appropriate e-mail account. Now, with El Capitan, it seems that this function no longer exists. How can I quickly find and access the files with in Apple Mail 10.11 El Capitan?

  Are you talking about looking for a folder in the Finder or in the mail?

• How to find and get rid of unnessary files, records, data, etc.

  How to find and get rid of unnessesary files, folders, data back up info etc.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you must clean the unnecessary files.

  Perform the steps from the link below and see if it helps.

  http://www.Microsoft.com/athome/Setup/CleanSweep.aspx#fBid=H8M_xQi7xZQ

  Hope this information helps.

  Meet us if you encounter any other Windows problem, and we would be happy to help you.

  Good day!

• Qosmio G40: How to watch and record digital terrestrial television

  I bought this G40 to watch and record digital terrestrial television, but apparently can't find the interactive parts (red button) of the transmissions.
  Toshiba has said I have to use a set - top box. What is c? It is not a machine for processing of digital information? That is to say a computer?
  Why can't it do it?

  In addition, the teletext on the remote control key does not seem to do anything.

  Does anyone know how it could be improved?

  Hello

  What computer G40 laptop do you have?

  Your Qosmio G40 is equipped with a DVB - T receiver?

  A description box what a decoder means here:
  http://en.Wikipedia.org/wiki/set-Top_box

• Best imac for the video editing and graphic design and recording of gameplay

  Hey guys I'm looking for the best imac laptop or desktop for video editing and recording of gameplay with capture card so if you are familiar with the desktop imac or laptop please leave commect to the best imac computer

  and care to capture the card to operate at its best

  • OS X 10.9 or later version
  • 2nd generation Intel Core i5 CPU (i5-2xxx or comparable), 2 Ghz or higher, before Turbo Boost
  • 4 GB of total RAM installed (or higher)
  • Built-in USB2.0 port

  I put spec for you guys can work find best computer imac

  Looking for a new or a used computer?

• Reading and recording of several channels simultaneously

  I use a NI PCIe-6363 map to acquire data from various sensors in an experimental engine.  I need to be able to show views and record data on all channels simultaneously.  I'm relatively new to Labview, so I think I'm doing things inefficiently.  I am also having a problem with the display of multiple signals.  I have attached the vi.  I look forward to the advice.

  DAQmx is able to take multiple samples at the same time, so you need only a wire covering your While loop. See this example VI that comes with LabVIEW. You can find others with the help > menu examples and digging from there:

  C:\Program Files (x 86) \National Instruments\LabVIEW 2012\examples\DAQmx\Analog Input\Voltage - Input.vi continues

  Initialization DAQmx VI would need another kind of entry rather than "PXI1Slot2/ai0. I forgot the exact syntax, but it would be something like "PXI1Slot2/ai0-15". In addition, the read DAQMx VI is polymorphic, so that it can read all these channels in sub form of table. Then, you have to build the table of these PXI objects to initialize DAQmx VI with the function 'Building the matrix' of LabVIEW and indexing table in 16 items with function "Array Index. You only have a single function Index Array, expand right down it and it automatically will give you items between 0 and 15 (or however far you develop) without having to wire in all indexes.

• The display and recording time elapsed during the reading of the instrument

  I've been programming Labview for a total of two days so please bear with my inexperience. I have a 9201 module that takes a reading of the voltage and it is plotted on a graph. I click on a Boolean switch and the graph starts playback and recording data every 3 seconds. When I click on that same switch I would like to start a clock. Then once the button is clicked once again I need to stop the clock and save time. I tried to use the elapsed timer function but can not understand how to operate inside my main while loop. I don't know if I need to use a subvi or something different all together. I enclose my any project that could make the issue easier to understand. Thanks in advance for any help.

  I changed your code (personally I him would not have made it, but I don't want too many changes in your code because you are a beginner in LabVIEW!).

  -Now, there are 2 loops: 1 bow for the acquisition (looped) and 1 loop for user interface operations (while loop + event structure: it is a very powerful structure in LabVIEW and you should take a look at a few examples to understand how it works)

  -You will find a registry to offset used by loop acquisition: I explain what it is in the diagram...

  -I gave you a VI that is almost the same as 'out of time' Express VI: maybe it will be interesting to try too understand that when you get more experience in LabVIEW (you will understand 'functional global variables' and "reentrancy execution": these 2 animals are used by 'elapsed time' Express VI (but also by the VI I've included, and which is almost the same thing))

  Note that I have shown the solution to 1 of the 4 graphs: you will need to do the same for the other 3. You also need to code elapsed time saving.

  Once again, the solution I gave you is very far from perfection, but with 2 days of practice of LabVIEW, it would be too complicated to explain the different architectures and the means of communication between the loops etc...

• Producer/consumer or master/slave, acquisition, control, analysis and recording of data

  Hi all

  I have NEITHER cDaq-9188 and its modules NI 9214 (thermocouple), NI 9203 (HAVE current) and NI 9263 (AO tension). I need to measure the temperature and pressure, and according to these data, I need a frequency converter to drive a compressor control. I've developed acquisition, analysis and recording program by the use of the state machine, the design of producer/consumer model and I have no doubt about their. They all work very well. Now, I need to add a control program in their. The problem is that I need to check the compressor with feedback from temperature data permanently, but I do not necessarily all the data acquired and permanently from the results of the analyses. For example, I need to record data once in 30 seconds. Which model desing should I use for this task?

  Edit: I was not able to find examples of advanced program relevant to the design of master-slave model. If you know where to find them, could you write in this thread please?

  The declarant buffer not data.  Do only the queues.  A new notification replaces the old value if she is ever read or not.  You would be loss of data with the notifiers if the loop of consumers with a notification utility cannot keep up with the data that they fade.

  What I show all the data buffers through the queue in the loop of the producer.  The queue of the consumer removes all data and do stuff with him (such as logging) if the elapsed time is over.  What is the problem with that? That is what for (imstuck) described in his message.

  The other alternative is that you put the timer into the loop of the producer.  Have the Boolean value TimehasElapsed drive a deal structure this place only the data if the time is over.  In this case, only some data gets queued, and consumer loop removes all data as it gets and it opens a session.

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Where can I find and install KB971644?

  Well, I'm exhausted, trying to find an answer or the mandatory update.

  It all started with me wanting to improve Windows Live messenger. I had Windows Vista with SP1. Then I was told (by Windows Live Installer) that I need to install SP2. So I downloaded and installed Windows Vista SP2 for my 32 System x.

  I tried again to update my Windows Live messenger. Now, the installer told me to install Windows Live essentials. So that (Windows Live Essentials) installed on my system, I found that I had to install the "platform for Windows Vista (KB971644) update".

  I followed the instructions on Windows Live Essentials Help Center, viz., start/Windows Update / check updates available updates/view, but could not find «Platform for Windows Vista (KB971644) update»

  I searched the internet and the Microsoft Web site for the update of platform required, but have not found anywhere. So someone please help!

  Apparently, Microsoft wants to make it virtually impossible to get this update unless one goes to suspect 3rd party sites to download from the KB for 971644 article says NOT a way to get this update from a Microsoft site to trust other than Windows Update, which does NOT update.

  The answer to your question is to download and install updates INDIVIDUAL 4 make up KB971644 for Windows Vista: can I get the update of platform (KB971644) without going through Windows Update

  Don't forget to download and record updates that correspond to the architecture of your system, for example. x 86 for 32-bit systems, x 64 for 64 bit systems.
  The architecture of the system is listed in Control Panel > system and security > system > system type:

• Error on push notifications "cannot find any record of application settings.

  Hi im getting the error "Unable to find any record of application settings", with status 0 code. I hope someone can help me.

  private function addNotificationToHub():void
  {
  NotificationManager.notificationManager.addEventListener(ErrorEvent.ERROR, onNotificationError);
  NotificationManager.notificationManager.notifyNotification(notification);
  }
  
  private function onNotificationError(event:ErrorEvent):void
  {
  trace(event.errorID);
  }
  

  Thank you

  Javier

  I got it to notify the notification with the NotificationManager.notificationManager.notifyNotification () method, we need to display notification post_notification permission on bar - descriptor.xml authorisation to work.

  I found this error in google or here perhaps because almost everyone followed the tutorial on message notification.

  He also worked for me before, but the descriptorfile has been changed for some reason any and I do not notice it.

• Find no records in an Excel sheet

  Hi all

  I am importing data from an excel file into oracle database. I wanted to know the number of records in an excel file and no columns using oracle webutil (Client_ole2). I received a web code that works very well, adding a NEM statement at the end of the file each time. Maybe it's not practical always, cannot ask user each time to add a statement of NEM, which in turn result in program to run infinitely.

  This is the code that is running

  DECLARE

  application Client_OLE2. Obj_Type;

  Client_OLE2 workbooks. Obj_Type;

  workbook Client_OLE2. Obj_Type;

  Client_OLE2 spreadsheets. Obj_Type;

  worksheet Client_OLE2. Obj_Type;

  worksheet2 Client_OLE2. Obj_Type;

  cell Client_OLE2. OBJ_TYPE;

  Client_OLE2 args. OBJ_TYPE;

  cell_value varchar2 (100);

  num_wrkshts NUMBER;

  wksht_name VARCHAR2 (250);

  EOD Boolean: = false;

  j integer: = 3;

  v_fName VARCHAR2 (250);

  worksheet_count number: = 0;

  BEGIN

  -Get the name of the file to open

  -v_fName: = "D:\MyDevelopment\Forms\Samples\WebUtil\Read_Excel\planets3.xls";

  v_fName: = WebUtil_File.File_Open_Dialog)

  directory_name = > "C:\". »

  -, file_name = > Get_Form_Property (:System.Current_form, Form_Name) |'. XLS

  , File_Filter = > null

  , Title = > 'Select customer filename to open.'

  );

  IF (v_fName IS NOT NULL) THEN

  -The following sets a communication with the excel worksheet

  -- --------------------------------------------------------------

  -Open the OLE application

  application: = Client_OLE2.create_obj ('Excel.Application');

  -Keep the hidden application

  Client_OLE2.set_property (application, 'Visible ','false ');

  workbooks: = Client_OLE2. Get_Obj_Property (application "Filing cabinets");

  args: = Client_OLE2. CREATE_ARGLIST;

  -Open the selected file

  -- ----------------------

  Client_OLE2.add_arg (args, v_fName);

  workbook: = Client_OLE2. GET_OBJ_PROPERTY (Workbooks, 'Open', args);

  Client_OLE2.destroy_arglist (args);

  worksheets: = Client_OLE2. GET_OBJ_PROPERTY (workbook, 'Worksheets');

  -Get the number of spreadsheets

  -- ------------------------

  num_wrkshts: = Client_OLE2. GET_NUM_PROPERTY (worksheets, 'Count');

  worksheet: = Client_OLE2. GET_OBJ_PROPERTY (application, 'activesheet');

  -Go to the first record

  go_block ('EXCEL_EXPORT_TABLE');

  premier_enregistrement;

  loop

  If: system.record_status <>'NEW' then

  create_record;

  end if;

  When the exit NEM;

  for 1.15 k loop - 15 frames / record - hard-code the length of the column

  args: = Client_OLE2.create_arglist;

  Client_OLE2.add_arg (args, j);

  Client_OLE2.add_arg (args, k);

  cell: = Client_OLE2.get_obj_property (spreadsheet calculation, 'Cells', args);

  Client_OLE2.destroy_arglist (args);

  If Client_OLE2.get_char_property (cell, 'Value') = 'null' then

  cell_value: = ";

  on the other

  cell_value: = nvl (Client_OLE2.get_char_property (cell, 'Value'), 0);

  end if;

  If upper (cell_value) = 'NEM' then - the loop runs until "NEM" are judged.

  Nem: = true;

  Message ('end of data');

  "exit";

  end if;

  Copy (cell_value, name_in ('system.cursor_item'));

  next_item;

  
  

  end loop; -for

  j: = j + 1;

  end loop;-main loop

  premier_enregistrement;

  -Release the handles object Client_OLE2

  IF (cell IS NOT NULL) THEN

  Client_OLE2.release_obj (cell);

  END IF;

  IF (spreadsheet IS NOT NULL) THEN

  Client_OLE2.release_obj (Worksheet);

  END IF;

  IF (spreadsheets IS NOT NULL) THEN

  Client_OLE2.release_obj (Worksheets);

  END IF;

  IF (worksheet2 IS NOT NULL) THEN

  Client_OLE2.release_obj (worksheet2);

  END IF;

  IF (workbook IS NOT NULL) THEN

  Client_OLE2.release_obj (Workbook);

  END IF;

  IF (workbooks IS NOT NULL) THEN

  Client_OLE2.release_obj (Workbooks);

  END IF;

  Client_OLE2. Invoke (application, 'Quit');

  Client_OLE2.release_obj (application);

  ON THE OTHER

  Message ("no file selected.'");

  message(' ');

  RAISE Form_Trigger_Failure;

  END IF;

  END;

  Please think it has no integrated to find no records and columns in excel file using oracle forms.

  Thank you and best regards,

  JaKes

  This change according to excel data file.

  for example, we also use this logic. because the first column in excel file still does not empty. It should be full.

  If any column of a raw material can be empty, one with just my solution can be

  v_all_column_str: = col_A_Value | col_B_Value | col_C_Value | col_D_Value |... col_n_value;

  if v_all_column_str is null, then--> you can tell, all of the columns of this vintage in excellent file is empty