Finder black widows

What could be the problem if all that I opened in the finder like this?

I solved it.

Tags: Mac OS & System Software

Similar Questions

replace black color

I need to replace black in the present with other options of color for my friend who is the designer and wants to see how other color combinations work and I tried replacing bothe color and hue saturation methods but they allows firstly the bizarre neony results and works at all. Any ideas? Thank you! :))

Hi Carmel,

Its black never easy evolution how be it in Photoshop. A girl with black hair generally turn a blonde is closing impossible to do convincingly. As soon as you lift the luminance of the lack of detail information appears immediately. However, it may be false. Do not expect to be able easily to bright yellow or orange intense and keep it looking real.

If this level of quality is high enough to you how you do it. I'm afraid that this is not a topic to beginners but if all goes well

You can experiment

First take the original image and reproduce them. We are working on the layer duplicate or higher.

(1) with the tool lasso around all black areas draw. Here is a very rough selection

(2) in a store the selection in quick mask mode.

(3) go to the color range. What we were doing before was only to give color range, a good starting point, do not make a good choice.

In the drop-down list select shadows and if you set the blur, but its not required. This will give a reasonable

selection of black areas. Create a layer mask so only the black areas are visible. You will always have the original image in the stack of layers provides the background.

(4) now how the color is changed. Create a gradient above the hidden layer map. Set the layer mode to color. You may need to pick up the cards degraded, but essentially, you have a simple gradient and color at one end of the gradient is mapped on the darks of a picture

and the color at the other end is mapped to the light of an image. Gross over simplification, but it is the principal. So, if you start with a simple

black-white gradient and change the black to tell red he maps the color red to dark areas of the image. The white end of the gradient can be left in the

White as the image is largely black. You need to cut the card of the hidden layer gradient - that is important. You will find black in the object will be replaced by the red, but the bottom layer is not affected.

(5) now, create a hue saturation adjustment layer and clip that to the gradient map. You will find you can now move the hue and change saturation

and even the luminance.

(6) Finally, use a curves layer to fine-tune the contrast.

I've only used a red on white gradient here, but you could experiment with several layers of the gradient map and this will probably give you a better range of colors

Hope that helps

Terri

Widow and line break TextField

Hello
In a TextField with multiline set to true, how can I find where the text has a line break?
I want to find the breaking point and then find a "widow", I want to find out how many words after the line break. I heard that the text field creates a software interrupt.
I believe that this is the position of the soft line break-
textField.text.indexOf('\r')

Then I have to get the string after that position.

Then get an array of the words in this chain, something like this-
String.Split(/\w | ' | (/ IG);

Can anyone share any advice or solutions?

DJ Gecko says:

Hi Kglad,

Thanks again for the help. I had to make some changes so that it can work properly.

public static void countWords(tf:TextField,_s:String):Vector.

{

var returnA:Vector. = new Vector. ();

var textA:Array = s.split(' ');

var save: String = tf.text;

TF. Text = ";

var num_line:uint = 1;

var wordCnt:uint = 0;

for (var i: uint = 0; i< texta.length;="">

{

tf.appendText (textA [i] + "");

wordCnt ++;

If (tf.numLines! = num_line)

{

the last word added to the created text field a new line

We do not want to include this last word to our word count for the previous line

-wordCnt;

returnA.push (wordCnt);

num_line = tf.numLines;

Since the last added word created the new line, we add it to our account

wordCnt = 1;

}

}

If there is a single line, we need. If there is more than one line, then this is the number of words to the last line

returnA.push (wordCnt);

TF. Text = saves;

return returnA;

}

glad to hear that you guessed it work.

Cannot find "solid color".

Hello
I'm new on Premier Pro and so far I'm useful. I am using FCP for years, and whenever I needed a solid regular black I
find under effects. For the first Pro, I look at the effects and I can not find it. Is someone can you please tell me where I can find it? Sorry for the
newbie question.
Please and thank you.
Best,
Kenny

Click the folder for new items next to the tray at the bottom of the project Panel. You will find black and colors as well as other itens mattes.

draw the line between black pixel: coordinates of the selected pixels?

Hello

I want to build a script that can check a Photoshop file and:

-find the black pixel

-for each black pixel, looking for an another black pixel at a maximum distance of 5 pixels

-then draw a line between the two black pixels.

I wrote this script below (my first script...), but it's VERY slow (and my final image is VERY large), I think because I test the color for each pixel in the image.

So an alternative would be to select a black pixel with the wand, then the script record all the details of the selected pixels, then my script wil test only the pixels (less than 1% of the pixels are black in my image).

Is this possible with JavaScript?

Thank you for your answer!

Marc

function main(){
 var startRulerUnits = app.preferences.rulerUnits;
 app.preferences.rulerUnits = Units.PIXELS;


 var myHeight = app.activeDocument.height;
 var myWidth = app.activeDocument.width;


// Find black pixel
 for(var i=5; i<myWidth; i++) {
  for(var j=5; j<myHeight; j++) {
   activeDocument.colorSamplers.removeAll()
   var sampler = activeDocument.colorSamplers.add([new UnitValue (i, 'px'), new UnitValue (j, 'px')]);
   if (sampler.color.rgb.hexValue === "000000") {


// For each black pixel, search another black pixel below left up to 5 pixels
    for (var m=i-5; m<i; m++) {
     for (var n=j+1; n<j+5; n++) {
      activeDocument.colorSamplers.removeAll()
      var test = activeDocument.colorSamplers.add([new UnitValue (m, 'px'), new UnitValue (n, 'px')]);
      if (test.color.rgb.hexValue === "000000") {


// Then draw a black line between the two black pixels
       var FillColour = new SolidColor;
       FillColour.rgb.hexValue = '000000';
       var ad=activeDocument;
       ad.selection.select([[m,n],[i,j],[m,n+1],[i,j+1]], SelectionType.REPLACE, 0, true);
       ad.selection.fill(FillColour);
       ad.selection.deselect()
      }
     }


// For each black pixel, search another black pixel below right up to 5 pixels
     for (var m=i+1; m<i+5; m++) {
      for (var n=j; n<j+5; n++) {
       activeDocument.colorSamplers.removeAll()
       var test = activeDocument.colorSamplers.add([new UnitValue (m, 'px'), new UnitValue (n, 'px')]);
       if (test.color.rgb.hexValue === "000000") {


// Then draw a black line between the two black pixels
        var FillColour = new SolidColor;
        FillColour.rgb.hexValue = '000000';
        var ad=activeDocument;
        ad.selection.select([[i,j],[m,n],[m,n+1],[i,j+1]], SelectionType.REPLACE, 0, true);
        ad.selection.fill(FillColour);
        ad.selection.deselect()
       }
      }
     }
    }
   }
  }
 }
}
main();

If someone wants to do the same thing, the ImageJ software works very well on very large images (1 billion pixels) by the process according to > binary > close

I have windows 7 os. a virus ripped through my registry and pulled out of the recovery points.

I have windows 7 os. a virus ripped through my registry and pulled out of the recovery points. Removed the hard drive to retrieve data on the device of the black widow on another computer, but cannot access the data due to password protection. How do my stuff? I know that I have to wipe the drive and start over, but I want my files first. I can see them working with the original BACK on the laptop, but they can't get out.

Hello

You posted in the Forums of Windows XP if you say you have Windows 7 so be careful
When you enter your Questions.

Answers - Forums of Windows 7
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7

---------------------------------------------------------------------------------------------------------------------

If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.

No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.

It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.

TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684

Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_free

SuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

Run the malware removal tool from Microsoft

Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)

Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

also install Prevx to be sure that it is all gone.

Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->

Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

Try the demo version of Hitman Pro:

Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro

--------------------------------------------------------

If necessary here are some free online scanners to help the

http://www.eset.com/onlinescan/

-----------------------------------

Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htm

Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx

----------------------------------

http://www.Kaspersky.com/virusscanner

Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

--------------------------------------------------------

After the removal of malicious programs:

Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

-----------------------------------------------------------------------

If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

======================================

If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
MALWARE IS STILL PRESENT).

How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html

=======================================

For extreme cases:

Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp

================================

If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
see your subsidiary local Support site.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

FP DW 8, FTP
Convert the site of the PS to DW.
Said hosting company ' with FP extensions, download via FTP will corrupt their ", that's why the site is messed up. Is this true? Forum MS/FP does not. Must I remove current and start from scratch with upload via DW?
Thank you.
> Hosting company says "with FP extensions, will be download via FTP.
> corrupted
' > them ", that's why the site is messed up. Is this true?

Yes.

> Forum MS/FP does not.

Can you send messages to?

> Should I remove current and start from scratch with upload via DW?

First and foremost, take a couple of weeks to gothrough the DW
Tutorials and also study the HTML and CSS. The more you know about those,
your transition will be easy. DW expects a lot more of you than FP
did, and as a result, you can find much more frustrating having the raw
reality of web development you looking fixedly in the face, rather than the assistants
PS.

> Is it possible to convert a FrontPage in a
> Dreamweaver site

1. I would define a Dreamweaver site pointing to a location on your hard drive
drive to the root of the local site and the current site of the public Service on the web
the remote site
2. I would use Dreamweaver (if your host supports FTP connections) for download
the remote site to the root of the site that you just set on the hard disk.
This will pick up all pages * after * webbot action so that the shared borders
and all are already present in the HTML page. It will also pick up all
the server script. Note - in case you are not able to connect
using FTP because some FP hosts block this Protocol, you need to use a
third "Copier site" like the black widow, QuadSucker or WebCopier, (or
even the DW extension called SiteAssist of WebAssist) to connect and
Download using http protocols. Do this way will * not * get
your script code from the server, if necessary (unless you used the WebAssist
extension).

3. I would create a DW template for pages that captures the 'shared '.
border. "
the effect you had in the public Service.
4. I copy and paste the content of each child to a new FP pages model
the page, and then save the new page of the child with an easily identifiable
nomenclature that is different from what was used on the FP site (as you)
Save the new child pages to the local site even as the FP pages).
5. Once completed, the basic site would download new pages in DW to some
area gathering/Web space, and by using the browser, I would check the site
(as it exists now remotely) is over.
6 then I would create a * new * site DW in a new location on the hard drive, and
to connect to and download all the files from the staging site.
7. you can now remove the original site of the public Service of your local system if you
Here you are.

You now have a complete site (less than the FP extension server-side
Code) having no FP prints.

If you have used functions of extension of FP server on the original site of the public Service
(form processing, gold books, tables of contents, etc.), you will need to
recreate these features in DW using 3rd party scripts or scripts that you
write yourself.

--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.dreamweavermx-templates.com - template Triage!
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
==================

"MrBob78" wrote in message
News:eegt9i$rug$1@forums. Macromedia.com...
> Conversion site of PS to DW.
> Hosting company says "with FP extensions, will be download via FTP.
> corrupted
' > them ", that's why the site is messed up. Is this true? MS/FP Forum does not work
> response.
> Should I remove current and start from scratch with upload via DW?
> Thank you.
>

The upgrade of the power supply.

I recently bought a vido GTX580 and discovered after I got that my wimpy 250 watt power supply will not manage it. The card requires at least a power of 600W at 42 amps on the 12V rails. The card must also 8-pin and a 6 'PCI Express' connectors from the power supply. Could someone recommend a diet that works with my hp P6774Y desktop computer? Also, it is quite easy to replace? Thank you!

Thanks to all who responded! I just got back from my local Best Buy store, and they had an 850 Watt Thermaltake 'Black Widow' food on sale for $100,00 and I bought. After reading the comment by wb2001 about the depth of power supply, I'm a little worried about that, but I don't know until what I opened the box (the physical dimensions are not printed on the box) and try to mount it. Wish me luck! :-)

Thanks again!

Hard drive shows up in Device Manager, but not in 'my computer '.

I have a Samsung HD103UI SATA hard drive in a dual docking station Thermaltake Black Widow hard drive. I connected it to my laptop via a USB port. It appears in Device Manager and says it's working properly. It however does not appear in my computer. I go to disk management and presents itself, he says "Dynamic Disk 1, invalid. If I right click on the drive, it asks if I want to convert it to base, but if I do that I will lose my data. I hooked this same configuration of my XP machine and it worked fine, no problem. How can I fix without basic conversion and how do I get it to appear in my computer?

End to this problem, that I had the hard drive on the xp machine unload everything out of it and reformat the hard drive on my Vista laptop. I did once it worked fine and I can move it back from my xp and vista machine. It's the only way I could get this drive to work.

Print solo campos of a PDF form

Buenos dias,
I have one form PDF con los campos una factura comercial.
The idea that I have are los campos in the application form PDF fill y despues sober print her factura in papel, pero no find black training Quebec's solo together los campos as rellene in el PDF.
Alguien me can say if possible, if possible, como hacerlo?
MUCHAS gracias.
Saludos.
Guillermo Migliore

This is not possible with the free player. You must have Acrobat to do.

Adding a Facebook Muse profile photo

Hello
I was wondering if there was a way to view Facebook profile pictures after joining a Facebook Muse?
A client wants to display Facebook profile photos in a pop-up as in this example:
https://www.thirdday.com/tour
Click "View details" and scroll down on the box.
This coding specialist or is it a Muse Widget out there I can use?
If someone could help me, that would be great.
Thank you
Black widow

See these topics for measures such as the addition of Gallery FB:

https://forums.Adobe.com/thread/1603958

Adding + Gallery with Facebook integration to adobe muse site.

You can insert the code in a ToolTip container, whereas it would be same as you mention with your example of site.

Thank you

Sanjit

PLEEEEZE... Help with specing on a new PC, NTSC system CS5.5 (links included)

Help with specing on a new PC NTSC with CS5.5 Master Suite. Windows 7, 64 bit. Will be used mainly for PP & still, some AFX & PS. editing a lot of avchd! Calendar usually between 1 1/2 to 2 hours in length, 2 or 3 LAYERS.
I've seen the benchmark page but found very confusing. I also read the forum reading many posts similar but found submerged :-)
KEY CONCERNS: Not sure, the choice of the video card or whether to go 6 core. I don't want to spend much more, unless I need to. Ideally I would like to put all THE project files on the DRIVE 2 Raid 0 without divide them upward on separate drives. I'll be able with such a system?
PROCESSOR: Intel Core i7-960 3.2 GHz LGA 1366 converted (boxed) SKU:275222 $199.99 boxed processor (I could go octacore, don't know yet)
http://www.microcenter.com/single_product_results.phtml?product_id=0330706
Or should I go 6 octo core? : $594^.99
http://www.Newegg.com/product/product.aspx?item=N82E16819115066
VIDEO card: Zotac ZT-40201-10 P GTX 470 1280 MB GDDR5 PCIe 2.0 x SKU: 838375 ((IS THIS THE BEST CHOICE?)) $200.00
http://www.microcenter.com/single_product_results.phtml?product_id=0342176
24 GIG RAM: Kingston HyperX memory 4GB 240-pin DDR3 SDRAM DDR3 1600 desktop
http://www.Newegg.com/product/product.aspx?item=N82E16820104244 $186,00
SYSTEM DRIVE: Western Digital VelociRaptor WD3000HLFS 300 GB 10 000 rpm 16 MB http://www.newegg.com/Product/Product.aspx?Item=N82E16822136322 $149.99
VIDEO PLAYERS: 2 DISCS VIDEO software RAID 0: Seagate sata 6.0 3TO http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215 x 2
Dump of disk: Seagate sata 6.0 3TO 1 http://www.newegg.com/Product/Product.aspx?Item=N82E16822148736 $215.00
Motherboard: ASUS Sabertooth X 58 Intel LGA 1366 X 58 SATA 6 GB/s USB 3.0 ATX Intel MB http://www.newegg.com/Product/Product.aspx?item=N82E16813131665
BLURAY BURNER: Pioneer black Blu - ray burner SATA BDR-206DBKS http://www.newegg.com/Product/Product.aspx?Item=N82E16827129066 & Tpk = BDR-206DBKS $109
: COOLER MASTER HAF 932 Advanced RC-932-KKN5-GP black steel ATX full Tower Compucase case with USB 3.0 and inner black http://www.newegg.com/Product/Product.aspx?Item=N82E16811119160 & cm_re = 2-_-11-119-160-_-Product COOLER_MASTER_HAF_93
$154,48
Power SUPPLY: Thermaltake Black Widow W0319RU 850W ATX http://www.newegg.com/Product/Product.aspx?Item=N82E16817153106
$129.99

1 Yes

2. 4 GB. DDR3-1600 + in a bag to hex or 2 packs of sorting of the brand and the desired model.

3. why not get the new GTX 570 or 580? They are more silent and cooler.

Sierra Black Black flipping Finder text

Everybody see their black rotating Finder text? If I move the finder window to a new location on the screen the text refreshes back to normal for a few moments. Very irritating.

Restart your computer and see if it sorts.

I find the black on the labels of the grey on tabs difficuly to see what I can change the colors of the tabs?

I just upgraded to Firefox 29, however I find that the black font on grey background color of tabs is difficult to read.

Can I change the color of the tab to something more light in the shade?

Hello, you can take a look at some light themes - maybe one of them is your goal: https://addons.mozilla.org/firefox/themes/

Black spot under finder

I've only used a Mac for less than 24 hours switched Windows after 20 years

I use OS X El Capitan 10.11.3 and I can't seem to remove the small black below point finder

on the dock, I can remove the black point of the virtue of the rest of the app icons by right-clicking and clicking

Quit but Finder no has no option left available when right click on on it.

Thank you.

The point refers to an application that is running, the finder is always on, so the point.

If you want to point to disappear, you can use the system preferences > Dock and uncheck the item

See indicators for open Applications.

Finder black widows

Similar Questions

Maybe you are looking for