Finder cannot find the necessary application to open a file.

Similar Questions

• How to configure Adobe Reader as the default application to open PDF files in Windows 10

  I have Windows 10. This includes Microsoft Edge and a left click on a PDF file, the file to open with Microsoft Edge. I want my PDF files to open with Adobe Reader by default. Anyone know how to make this happen?

  Hi Thomas,

  Right-click any file pdf-> Select 'open with'-> program choose default-> select Adobe Reader in the list of programs-> click OK

  Kind regards
  Rahul

• Signed .bar - cannot find the default application

  Hello

  a friend send a link to his game app signed .bar to consult. (The game is created with Air 2.5 if it matters)

  I downloaded it with the BlackBerry browser and when I try to open the .bar, an error message appears

  "Cannot find the default application"

  
  I've already put my developer intro PlayBook (OS 2.1) mode.

  How to install the .bar file?

  Thank you.

  Vibes

  You need to side load the folder bar. A lot of discussion on that.

• "Can't find the necessary files" cannot retrieve or create the recovery disk. Help!

  I can't refresh PC or create the recovery disk. He keeps going with error message "Cannot find the necessary files" and tells me to insert the recovery media. There is no system restore point, and I've upgraded to Windows 7 Windows 8 Pro without a disc, so I can't do anything. Help! Strangely, nusrmgr.cpl disappeared, although I had seen the shortcut a few weeks ago (no, I'm not deleting it).

  Hello

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. Why are you trying to cool off the computer?

  2 are you facing problems with Windows 8?

  3. how many accounts is configured in the computer?

  You can scan the file system (CFS) auditor. This will replace the corrupted Windows files.

  Follow these steps:

  (a) start the desktop view.

  (b) open the command prompt, right-click in the left corner when the windowappears, and select prompt (admin).

  (c) type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  You can also try to create a new user account and check if the problem persists.

  If the problem persists, you will need the DVD to perform repair installation of Windows 8. If you download the installation of Windows 8 files, check your emails, there should be a link to download an ISO file. Download and burn the file to a DVD.

  The DVD to perform the repair.

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• Cannot find the default applications in the Regional service console

  Hi all
  
  When I opened the console of Regional service, I am unable to find the default applications in that. Kindly guide me
  
  Thanks and greetings
  Chimbu

  Hi Chimbu,

  Please check the Log-In of credentials of the user that has been created by you to connect to the Regional service Console.

  User must have administrator credentials.

  Thanks and greetings
  Saru

• Cannot find the necessary drivers for Satellite M30X

  I have 4 error codes displayed in hardware, 1 controller network, 2 & 3 PCI Flash Memory (twice) and 4 video controller (VGA compatible).

  These are all driver problems, but I can't find the necessary drivers on the site of Toshiba driver. I have lost the original software provided with the PC.

  Someone at - he of the good suggestions. I can't use my wireless internet, neither the DVD game, I tried to download as much as I can to help, but nothing fix the fault.

  Error code 28 showing all have.

  Hello

  I checked the Toshiba download page, and it has listed all the necessary drivers, tools and utilities for Satellite M30X.

  I just hope that you have installed in the correct order. As you can see there are two display (Intel and ATI) drivers. Make sure that you have chosen the right way. Drivers LAN and WLAN are also there. Just start with the setup.exe file and follow the instructions to facilities.

  28 "COLLECTION" - the drivers for this device are not installed.

• If I do not select F11 (fullscreen) a large part of the screen 'falls' to the right of my screen is not readable, I'm not able to find the necessary adjustments.

  Question
  If I do not select F11 (fullscreen) a large part of the screen 'falls' to the right of my screen is not readable, I'm not able to find the necessary adjustments.

  2/3 blanco on the left side of the screen

  With F11, all OK.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Need to update my Acrobat 9.0.0 Pro to 9.5.5 version. Where can I find the necessary files - because the update does not seem to react (not supported any more, I guess that)

  Need to update my Acrobat 9.0.0 Pro to 9.5.5 version. Where can I find the necessary files - because the update does not seem to react (not taken care no more, I assume that). I wouldn't be forced to buy a newer software in this way...

  You can get all updates from here: ftp://ftp.adobe.com/pub/adobe/acrobat/

  Remember that you must install in order, one after the other.

• Just upgraded to El Capitan and cannot access the calendar. It opens with a "Shift schedules to the server" message Can only Force Quit

  Just upgraded to El Capitan and cannot access the calendar. It opens with a message 'Moving calendars to the server.

  I cannot access all features and can be closed only by using force quit.

  Please stop calendar and also the application of reminders, runs. Force quit if necessary.

  Back up all data.

  If you synchronize some of your calendars, or reminders with iCloud, then in the iCloud preferences window, uncheck that marked calendars and reminders. You will be prompted to confirm that you want to remove your iCloud calendars and reminders of the computer. They will always be in iCloud. Re-check the boxes.

  If you synchronize agendas or reminders with another network such as Google service, please open the preferences panel Internet accounts. Make a note of the settings for calendar accounts, then delete and recreate.

  Launch schedule and see if there is an improvement.

• Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  Is it possible to find the two sentences into one pdf file? For example, I know the words 'Here' and 'the answer' occur more than once in my document, but only once on the same page. I'm looking for this page.

  I tried to do this by using the search but it will find only them, if they occur as a long chain, that is to say "Here's the answer" rather than how they occur in the document it is to say "Here 's" a bunch of information that leads you to 'the answer'. The search feature so standard did not help.

  Then I tried to do this by using the tool to delete (obviously not the application of writing!) because it allows me to search for multiple words or phrases, however it is not highlight what page both are found. I tried to turn on the preference to enable deletions of comments and even if it meant that I could then go through all the comments, it's still not faster than my document is more than 1,000 pages, which meant there were too many total comments for me to be able to easily identify which page had both.

  Any ideas?

  There is no built-in way to search for two strings and limited to show only the results that appear on the same page.

  It can be done by using a custom script, however.

• I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail.

  I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?

  [moved]

  I had the same problem 2 weeks while in the Mexico.  I contacted the support TWC and the person to whom I spoke said he had to unlock something.  When he did, all my mail came in Outlook in the spam folder.  It was OK because I got my mail.

  I moved to a different House and now have the same problem again.  I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage.  He has not found anything by the previous call that guided him by setting this time.  He said that he would open a ticket and call me in the next 24 to 48 hours.

  Is it reminds and solves the problem, I'll post how it was corrected.

  Amigos audio!

• I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!

  I tried to download the creative cloud and it didn't download correctly (after a long time) and now I can't uninstall it. It takes place on my computer but I cannot uninstall the Adobe application. Help please!

  Hi Julie,.

  Please see the below help document to uninstall the application:

  Using creative cloud | Download, install, update or uninstall applications

  Otherwise, you can use the CC cleaning tool as well.

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Kind regards

  Sheena

• Windows to use a specific application to open a file with a MCD.

  Original title: "open with" application "Choose default program" Cancel

  I accidentally changed the icon and the program using the "open with" application "choose default program" to the word instead of VectorWorks. The central database file can still be opened by the program. However, I can't find the program or its icon on the 'recommended' or 'Other' menu programs even if the program is located in my folder "Program Files". How to cancel the global setting or that the program "open with" to recognize the program?

  Hi John,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you want Windows to use a specific application to open a file with a MCD. Please correct me if I misunderstood.

  John, I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Please follow the steps mentioned in the article to set the default application.

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• How can I change the default program to open ZIP files?

  original title: open .zip files

  I changed the default mode of opening zip files somehow. My laptop now wants to use something other than the Windows Explorer to navigate to the zip files. I tried to "Browse" to Windows Explorer, but it will not find...

  Zip files still show with compressed folder icon?

  Try re-registering the DLL that controls how the Zip files are open.  Click Start and in the search for field type

  Regsvr32.exe /u zipfldr.dll

  Press ENTER.  Click Start, then in the type field search

  Regsvr32.exe zipfldr.dll

  Press ENTER.  See if that fixes things.

• Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

  The subject says it all: Distiller will suddenly end/crash the * SECOND * time I open a file for conversion to PDF.

  But I think I have an idea why this is happening. In general, I use Distiller to convert EPS or PS files as PDF files. In addition, almost without fault, I incorporate the required (only of Type 1) fonts directly in files EPS/PS (using the required format to PFA) so no local fonts on my computer are needed to be looked at to distill in to be embedded in the file PDF. they are already in the EPS/PS files.

  But yesterday, I tried to convert EPS/PS files to PDF using Distiller in which I had NOT embedded fonts Type 1 (PFA format, of course) in the source of EPS/PS files. All first this conversion would work (in which I select "open" and choose an EPS/PS file for conversion), but after this initial conversion, the * SECOND * time I clicked "Open" the file, Distiller would immediately close/crash.

  Then, I searched the web for answers and discovered that some people have trouble distilling to initialize if all their computer system fonts were read-only. So I went back to my EPS/PS files and embedded fonts Type 1 (PFA format) required in them and then - as if by magic - distill worked without a hitch: I could open and convert any number of them in succession, with distilling never close / crashing.

  Then, I found the reason why distilling had been crashing at the second attempted to open a file (once again, simply by pressing the "open" button to find a file to convert, * no * after selecting a file) must have something to do with distilling scanning fonts installed on my computer, when there was no PFA font incorporated to make reference to , and a read only font on my system was the cause of the problem. However, I have looked in both places of logic where my fonts must be located (c:\psfonts and c:\windows\fonts), but found * no. attributes * files fonts defined in 'read only' so, I'm stumped.

  I use Distiller Pro 10.1.1316 (acrodist.exe) on a machine to earn 8.1. I found similar positions, which dates back to 2004, about Distiller crashing immediately after opening when certain fonts are read-only; I haven't found a post about anyone successfully using Distiller to convert EPS or PS to PDF and then have the program crash when the "Open" button is pressed subsequently. The clues, anyone?

  Background: Distiller Server is a product discontinued long - ago - use of Distiller server is now simply prohibited, and LiveCycle PDF Generator is available for servers.

  Since you are not using Distiller Server and this forum is essentially abandoned, I recommend that you try the Acrobat - forum creation (etc.) instead.