FINDER WINDOWS DO NOT DISPLAY THE CONTENT.

Similar Questions

• Finder windows does not display the content

  I have a Pre MacBrook, retina, 13-inch, early 2013 with a 2.6 GHz Intel Core i5, 8 GB memory, OS x 10.9.5. Today, my Finder became unstable. When I open a Finder window, it is empty and sometimes even shows the desktop or parts of the application 'through' underlying window. When I force-quit Finder and recovery, the first time I open a Finder window opens normally, but after a time freezes. Opening of windows within the application file works normally, so I can access my files in this way, but it is very annoying. Does anyone have an idea how to solve this problem? You can provide any help will be greatly appreciated.

  Boot without failure and then stop and start normally seems to have solved the problem (I'm crossing my fingers as I type).

• CD\DVD player does not display the contents of the data DVD.

  CD\DVD player does not display the contents of the data DVD, but will display the content of the data CD.  What is happening on more than one PC, and it began when Active Directory GPOS have been applied for the PC.  If untying policies the problem persists.  What happens on DVD ROM and DVD RAM drives.  Scanning software has been added to these machines, think it might be an ASPI crush.  All these machines are XP SP3 running McAfee.  When you insert a DVD with data on this topic, the name of the drive in windows password DVD RAM drive to CD drive, and if you try and browse the DVD it displays as a blank CD.  I changed something on the PC with the policy but cannot understand what he.  Other identical PC can view the contents of the DVD very well, but they never had the same strategies.  Any ideas, thank you.

  Hi PDoneen,

  The restore of the system; restore the computer to the before date when policies have been launched on one of the affected computer.

  You can check the link for the steps below: how to restore Windows XP to a previous state:http://support.microsoft.com/kb/306084

  Post back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why BridgeCS6 does not display the contents of some folders?

  I will look for something in Bridge CS6, through my different folders and all sudden bridge will not display the content of a certain (or even folders) without apparent reason.

  It doesn't seem to be any pattern to it and occurs randomly.

  
  Everyone knows about this problem?

  
  

  Bridge will not display any of the items in a certain folder/volume/drive.

  Here is a screenshot of what happens

  

  It happened on the day I installed CS6 a month ago and I've applied all updates that have been released.

  I'm on OS x 10.6.8.

  
  

  Any info would be much appreciated.

  Thank you.
  

  All this would have something to do with an error message that I've been doing from day one, whenever I start bridge.

  CS6 is come with (again) with a different format of the cache and you need for the discount cache files and folders to a new cache file. If you do not use more of CS5 (and with CS6 on your system, there is no need more), I would say to manually delete the cache for both files and start again.

  This is the route that I've used several times to get a fresh start when the bridge had serious problems. (read first and then try)

  Exit the bridge and got to your user library (the library in your user account, not the library level system root). Here is the path to follow:

  User (your name) / library / caches / Adobe / Bridge CS6. Inherent are two files (Cache plugin Adobe Bridge and a folder called cache). Drag the two files outside the library (preferable to the trash but it is you). The two files them refresh chokes with files new, fresh and empty once you have restarted the bridge.

  If there is still a case for Bridge CS5 in this place I would also delete these contents here. Cache files can reach massive proportions, and you can have only one version of bridge active at the same time.

  Then, in the same library as above (user (your name) / library /) go into the Preferences folder and inherent to find and remove the plist for bridge (com.adobe.bridge5.plist) by dragging it in the trash.

  Now restart Bridge with pressing the option key and choose Reset preferences.

  This gives you a new and cool bridge as in out of the box. You need to reset your preferences for your custom wishes but if you saved the custom workspaces, they all should be there and you can restore it with the option under the triangle of the workspaces in the bar of the high bridge, the colors of the user interface must be set to zero if you have customized before).

  But it must also be cached files again for thumbs, previews and ACR settings. Depending on the size and the quantity of files you have this will take some time. I used to select the main folder where are my subfolders with photos is placed in and on the view menu, select the option to show items from subfolders. Then I let it run all night (have a lot of large files on my system). After that, all my files are put in cache and ready to use.

  You should be aware that the bridge can be very processor demanding when caching and have enough free space on your disk, but especially to the left enough RAM installed, this shouldn't be a big problem. While the minimum requirements show something like 1 or 2 GB of RAM, more RAM is recommended. RAM is cheap these days and if you can you should max your system with as much as possible. All applications will provide this improvement

• When I open a link in a new window does not display the web address.

  When I open a link in a new window does not display the web address. What have I done wrong? It used to work and it works if I open the link in a new tab, the problem is that I hate to use tabs prefer a new window every time... Help!

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When trying to see if my firewall is turned on it says because of unidentified problem windows can not display the firewall settings

  When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• How can I click apply when switching back resolution lower when the window does not display the Apply button when

  How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low

  Hello

  Try pressing the ENTER key on the keyboard instead.

  See you soon.

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• Windows does not display the CD-ROM drive

  A week ago, my computer stopped showing me an icon for my DVD player. When I go into the Device Manager there is no option for CD/DVD players. I tried Microsoft Fix It, and he told me that there is no CD drive. I can not re - install a driver because the Device Manager does not display the CD players.

  I did not major changes to my computer I know so I can't imagine what the problem is. Help?

  Trevor

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  After the foregoing:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why RoboHelp does not display the contents of the data required of <>.chm when combined as aid in my application?

  Beautiful Hello all,
  Met someone said below show-stopper. Another GREAT MOMENT help required, will help me in a big way.
  Using Adobe RoboHelp, Version 10 and IE version 10.
  I n my local machine:
  1.) I finished my Design editor courtesy of technical writing
  2) generating chm file: display -> pods -> Single Source Layouts -> right click on Microsoft HTML Help -> Tagged defined as primary layout
  3) primary production layout: file -> create -> layout main page (Microsoft HTML Help)...
  4) look at a main Layout: file -> display -> main layout
  Everything works ODDLY far with the desired output (like Hide, back, refresh, home, Print, Options, content, Index, search, glossary and data content)

  Show stop, in my application server:

  5.), I copy the robohelp project any folder my local machine to my path of the application server

  6 .) My Application was developed in ASP .NET, Version 4.0.

  Linkhelp 7) has been created in this application in which here <>.chm file name has been linked in the code to read of the project RoboHelp Server folder------! SSL! ------ Microsoft_HTML_Help\

  8.), I connect to my application says-> click on the help page--> displays the required structure / keys as hide, back, refresh, home, Print, Options, content, Index, search, glossary

  (a.) by clicking on on the books or the topics listed under Cmaterial : you are prompted to with error message warning called " Navigation to the webpage was canceled. "What you can try: Retype the address "

  * This is a huge SHOW-STOPPER. I spent many hours on this subject, but unable to deciper with a solution at all) *

  (Note: am able to open and read the contents of the data required by clicking on the books or the topics listed under Cmaterials project RoboHelp Server folder------!) SSL! (- Microsoft_HTML_Help\ <>.chm)

  Why is the required data from the <>.chm content not displayed RoboHelp when combined as a help in my application?

  Cheese - Vipin ndoye

  If you looked at the error message and searched the forum, you will find the answer, since it is a problem that began in 2005. You must run no CHM files from a server and can not without editing the registry of users. See the next page.

  http://www.Grainge.org/pages/authoring/chm_mspatch/896358.htm

  Throughout your questions were based on webhelp, why all of a sudden we're going CHMS.

  See previews on my site for the correct form of aid to be used in different scenarios.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• WANT TO UPDATE MICROSOFT - MET PROB - WINDOW CAN NOT DISPLAY THE PAGE, I'M LOOKING FOR--

  Update microsoft window-

  PorB met

  cannot display the p

  age, I'm looking

  http 404 error

  Hello

  1. are you referring to Windows Update?

  2. what version of Internet Explorer is installed on your computer?

  The Web page is not found (HTTP 404 error) If you are using Internet Explorer, this error message is due to if Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  Note: If you are unable to access Windows update Web page, then I suggest you try the following steps.

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer.

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  § https://*.microsoft.com

  § https://download.windowsupdate.com

  § https://update.microsoft.com/windowsupdate

  § http://*.update.microsoft.com

  § https://*.update.microsoft.com

  § http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  Note: For "Internet Explorer cannot display the webpage" error I suggest you refer to the steps in the following Microsoft article.

  Internet Explorer cannot display this webpage: http://support.microsoft.com/kb/956196

  Notes:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Clean boot Once you have completed troubleshooting, re-enable all services to reset the computer as usual.

  System Restore When you restore the system to a previous state, any programs or updates that have been installed since that date will be removed.

  Keep us updated on the status of the issue.

• 4.1 Developer, the output of the Script window does not display the last line of the output automatically

  Hi all

  I use the new version of the developer 4.0.1.14 on Windows 7 x 64, I noticed that the result of the query or the output of the script does not display as before:

  When I run a query lets say with 100 lines of output, run the query successfully, but the cursor jumps automatically to the last record in the game as in all previous versions, I have to scroll manually everytime.

  Can I change this?

  Thank you

  No, unfortunately, it's a bug.

  It is not for all queries however. Still boring.

• Finder windows does not display files

  I have a Pre MacBrook, retina, 13-inch, early 2013 with a 2.6 GHz Intel Core i5, 8 GB memory, OS x 10.9.5. Today, my Finder became unstable. When I open a Finder window, it is empty and sometimes even shows the desktop or parts of the application 'through' underlying window. When I force-quit Finder and recovery, the first time I open a Finder window opens normally, but after a time freezes. Opening of windows within the application file works normally, so I can access my files in this way, but it is very annoying. Does anyone have an idea how to solve this problem? You can provide any help will be greatly appreciated.

  I just realized that I posted this to the wrong community.

• Why Firefox can not display the content of the right that IE is doing well?

  It has been long. Whenever firefox has been directed to the page for papers (not just this one, but each book link), it appears like the screenshot. I thought it was the question on the Web page until I used IE. IE shows everything correctly but not Firefox.

  What are the settings that I was wrong?

  Thank you.

  The server sends the text/css content type, you should not have to substitute it.

  You access the site through any proxy which may change the content-type header?

  As a temporary workaround, you can have Firefox tell the server that you do not gzip output. This will increase the time to download for some files, but if this site is important to you, you can use it for now, until a solution is found.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste encod and make a pause so that the list is filtered

  (3) double-click the preference network.http.accept - encoding and remove gzip and the comma after she and click OK to save the changes (to restore the default later, you can click right > reset preference)

• Miniature preview does not display the content of the image.

  I have a large library of private clipart purchased. On my old XP computer, when I went looking for a picture, the thumbnail would indicate the image, making the search very easy. I passed to a new computer using XP also, and when I go to insert a picture of my file, I get a generic JPEG or BitMap logo for all images. I have to open each one to see how it's called. I have 1000s of such images. I tried to use different 'Withs open', but they do not change the thumbnail view. How to restore a specific, virtual vignette?

  I have a large library of private clipart purchased. On my old XP computer, when I went looking for a picture, the thumbnail would indicate the image, making the search very easy. I passed to a new computer using XP also, and when I go to insert a picture of my file, I get a generic JPEG or BitMap logo for all images. I have to open each one to see how it's called. I have 1000s of such images. I tried to use different 'Withs open', but they do not change the thumbnail view. How to restore a specific, virtual vignette?

  =======================================
  First, does make a difference if you open the folder that
  contains the images clip art and go to... View / thumbnails?

  You declare that you need to open a file to see what it's called?
  You say that there is no file name?

  Also... what format (extension) of the clipart? .jpg? .wmf?

  It may be interesting to try to force a reinstallation of Windows Picture
  and Fax Viewer:

  Reach... Start / run and type
  (or copy and paste):

  regsvr32 /i shimgvw.dll
  (Yes, the space after the 2 and space after that the i is necessary)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.